- 16 Nov, 2016 1 commit
-
-
Praveen Paneri authored
Decoupled MMIO is an alternative way to access forcewake domain registers, which requires less cycles for a single read/write and avoids frequent software forcewake. This certainly gives advantage over the forcewake as this new mechanism “decouples” CPU cycles and allow them to complete even when GT is in a CPD (frequency change) or C6 state. This can co-exist with forcewake and we will continue to use forcewake as appropriate. E.g. 64-bit register writes to avoid writing 2 dwords separately and land into funny situations. v2: - Moved platform check out of the function and got rid of duplicate functions to find out decoupled power domain (Chris) - Added a check for forcewake already held and skipped decoupled access (Chris) - Skipped writing 64 bit registers through decoupled MMIO (Chris) v3: - Improved commit message with more info on decoupled mmio (Tvrtko) - Changed decoupled operation to enum and used u32 instead of uint_32 data type for register offset (Tvrtko) - Moved HAS_DECOUPLED_MMIO to device info (Tvrtko) - Added lookup table for converting fw_engine to pd_engine (Tvrtko) - Improved __gen9_decoupled_read and __gen9_decoupled_write routines (Tvrtko) v4: - Fixed alignment and variable names (Chris) - Write GEN9_DECOUPLED_REG0_DW1 register in just one go (Zhe Wang) v5: - Changed HAS_DECOUPLED_MMIO() argument name to dev_priv (Tvrtko) - Sanitize info->had_decoupled_mmio at init (Chris) Signed-off-by:
Zhe Wang <zhe1.wang@intel.com> Signed-off-by:
Praveen Paneri <praveen.paneri@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
- 15 Nov, 2016 5 commits
-
-
Maarten Lankhorst authored
dev_priv->hw_ddb is only used by skl_update_crtcs, but the ddb allocation for each pipe is calculated in crtc_state. We can rid of the global member by looking at crtc_state. Do this by saving all active old ddb allocations from the old crtc_state in an array, and then point them to the new allocation every time we update a crtc. This will allow us to keep track of the intermediate ddb allocations, which is what hw_ddb was previously used for. With hw_ddb gone all SKL-style watermark values are properly maintained only in crtc_state. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-5-git-send-email-maarten.lankhorst@linux.intel.com [mlankhorst: Reword commit message.] Reviewed-by:
Matt Roper <matthew.d.roper@intel.com>
-
Maarten Lankhorst authored
This is the last bit required for making nonblocking modesets work correctly. The state in intel_crtc->hw_ddb is updated in the nonblocking part of a nonblocking commit. This means that even attempting a commit before a nonblocking modeset completes will fail, because intel_crtc->hw_ddb still has stale values. The stale values are 0 if the crtc is being enabled resulting in a failure during atomic check, but it may also result in double use of ddb allocations. Fix this by explicitly copying the ddb allocation from the old state. This has to be done explicitly, because a modeset that doesn't change active pipes, or a modeset converted to a fastset will will clear the current state. Signed-off-by:
-
Maarten Lankhorst authored
The watermark updates for SKL style watermarks are no longer done in the plane callbacks, but are now called in a separate watermark update function that's called during the same vblank evasion, before the plane updates. This also gets rid of the global skl_results, which was required for keeping track of the current atomic commit. Changes since v1: - Move line unwrap to correct patch. (Lyude) - Make sure we don't regress ILK watermarks. (Matt) - Rephrase commit message. (Matt) Changes since v2: - Fix disable watermark check to use the correct way to determine single step watermark support. Reviewed-by:
Lyude <cpaul@redhat.com> Signed-off-by:
-
Maarten Lankhorst authored
Allow the driver to write watermarks during atomic evasion. This will make it possible to write the watermarks in a cleaner way on gen9+. intel_atomic_state is not used here yet, but will be used when we program all watermarks as a separate step during evasion. This also writes linetime all the time, while before it was only done during plane updates. This looks like this could be a bugfix, but I'm not sure what it affects. Changes since v1: - Add comment about atomic evasion to commit message. - Unwrap I915_WRITE call. (Lyude) Changes since v2: - Rename atomic_evade_watermarks to atomic_update_watermarks. (Ville) - Add line wraps where appropriate, fix grammar in commit message. (Matt) Changes since v3: - Actually fix commit message. (Matt) - Line wrap calls to watermark update functions. (Matt) Signed-off-by:
-
Chris Wilson authored
Commit 6b5e90f5 ("drm/i915/scheduler: Boost priorities for flips") added priority boosting for the modern atomic pageflips (and modesets), but we should do the same for existing users of mmioflips (we don't yet need to consider csflips as they are not used by execlists and so do not have any support for a scheduler). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20161115092249.18356-1-chris@chris-wilson.co.ukReviewed-by:
-
- 14 Nov, 2016 27 commits
-
-
Chris Wilson authored
Boost the priority of any rendering required to show the next pageflip as we want to avoid missing the vblank by being delayed by invisible workload. We prioritise avoiding jank and jitter in the GUI over starving background tasks. v2: Descend dma_fence_array when boosting priorities. Signed-off-by:
-
Chris Wilson authored
In order to support userspace defining different levels of importance to different contexts, and in particular the preferred order of execution, store a priority value on each context. By default, the kernel's context, which is used for idling and other background tasks, is given minimum priority (i.e. all user contexts will execute before the kernel). Signed-off-by:
-
Chris Wilson authored
Track the priority of each request and use it to determine the order in which we submit requests to the hardware via execlists. The priority of the request is determined by the user (eventually via the context) but may be overridden at any time by the driver. When we set the priority of the request, we bump the priority of all of its dependencies to match - so that a high priority drawing operation is not stuck behind a background task. When the request is ready to execute (i.e. we have signaled the submit fence following completion of all its dependencies, including third party fences), we put the request into a priority sorted rbtree to be submitted to the hardware. If the request is higher priority than all pending requests, it will be submitted on the next context-switch interrupt as soon as the hardware has completed the current request. We do not currently preempt any current execution to immediately run a very high priority request, at least not yet. One more limitation, is that this is first implementation is for execlists only so currently limited to gen8/gen9. v2: Replace recursive priority inheritance bumping with an iterative depth-first search list. v3: list_next_entry() for walking lists v4: Explain how the dfs solves the recursion problem with PI. Signed-off-by:
-
Chris Wilson authored
The scheduler needs to know the dependencies of each request for the lifetime of the request, as it may choose to reschedule the requests at any time and must ensure the dependency tree is not broken. This is in additional to using the fence to only allow execution after all dependencies have been completed. One option was to extend the fence to support the bidirectional dependency tracking required by the scheduler. However the mismatch in lifetimes between the submit fence and the request essentially meant that we had to build a completely separate struct (and we could not simply reuse the existing waitqueue in the fence for one half of the dependency tracking). The extra dependency tracking simply did not mesh well with the fence, and keeping it separate both keeps the fence implementation simpler and allows us to extend the dependency tracking into a priority tree (whilst maintaining support for reordering the tree). To avoid the additional allocations and list manipulations, the use of the priotree is disabled when there are no schedulers to use it. v2: Create a dedicated slab for i915_dependency. Rename the lists. Signed-off-by: -
Chris Wilson authored
The start of the scheduler, add a hook into request submission for the scheduler to see the arrival of new requests and prepare its runqueues. Signed-off-by:
-
Chris Wilson authored
The execlist_lock is now completely subsumed by the engine->timeline->lock, and so we can remove the redundant layer of locking. Signed-off-by:
-
Chris Wilson authored
Defer the transfer from the client's timeline onto the execution timeline from the point of readiness to the point of actual submission. For example, in execlists, a request is finally submitted to hardware when the hardware is ready, and only put onto the hardware queue when the request is ready. By deferring the transfer, we ensure that the timeline is maintained in retirement order if we decide to queue the requests onto the hardware in a different order than fifo. v2: Rebased onto distinct global/user timeline lock classes. v3: Play with the position of the spin_lock(). v4: Nesting finally resolved with distinct sw_fence lock classes. Signed-off-by:
-
Chris Wilson authored
In order to support deferred scheduling, we need to differentiate between when the request is ready to run (i.e. the submit fence is signaled) and when the request is actually run (a new execute fence). This is typically split between the request itself wanting to wait upon others (for which we use the submit fence) and the CPU wanting to wait upon the request, for which we use the execute fence to be sure the hardware is ready to signal completion. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
In order to simplify the lockdep annotation, as they become more complex in the future with deferred execution and multiple paths through the same functions, create a separate lockclass for the user timeline and the hardware execution timeline. We should only ever be locking the user timeline and the execution timeline in parallel so we only need to create two lock classes, rather than a separate class for every timeline. v2: Rename the lock classes to be more consistent with other lockdep. Signed-off-by:
-
Chris Wilson authored
Localise the static struct lock_class_key to the caller of i915_sw_fence_init() so that we create a lock_class instance for each unique sw_fence rather than all sw_fences sharing the same lock_class. This eliminate some lockdep false positive when using fences from within fence callbacks. For the relatively small number of fences currently in use [2], this adds 160 bytes of unused text/code when lockdep is disabled. This seems quite high, but fully reducing it via ifdeffery is also quite ugly. Removing the #fence strings saves 72 bytes with just a single #ifdef. Signed-off-by:
-
Ville Syrjälä authored
On pre-gen4 we connect plane A to pipe B and vice versa to get an FBC capable plane feeding the LVDS port by default. We have the logic for the plane swapping duplicated in many places. Let's remove a bit of the duplication by having the crtc look up the thing from the primary plane. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478616439-10150-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
Instead of checking for everything not supporting the limited color range bit in the DP port register, let's check for the one thing that does have it (g4x). Signed-off-by:
Jim Bride <jim.bride@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479145447-12907-3-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
dp_encoder_is_mst flag in the crtc state can be replaced by intel_crtc_has_type(..., INTEL_OUTPUT_DP_MST). Let's do that. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
The primary and sprite planes on CHV pipe B support horizontal mirroring. Expose it to the world. Sadly the hardware ignores the mirror bit when the rotate bit is set, so we'll have to reject the 180+X case. v2: Drop the BIT() v3: Pass dev_priv instead of dev to IS_CHERRYVIEW() Signed-off-by:
-
Ville Syrjälä authored
Move the plane control register rotation setup away from the coordinate munging code. This will result in neater looking code once we add reflection support for CHV. v2: Drop the BIT(), drop some usless parens, Signed-off-by:
-
Ville Syrjälä authored
Using == to check for 180 degree rotation only works as long as the reflection bits aren't set. That will change soon enough for CHV, so let's stop doing things the wrong way. v2: Drop the BIT() Signed-off-by:
-
Paulo Zanoni authored
Because it's shorter, easier to read, newer and cooler. And I don't think anybody else has pending FBC patches right now, so the conflicts should be minimal. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Paulo Zanoni authored
Use drm_atomic_get_existing_crtc_state() instead of looping through the CRTC states and checking if the FBC CRTC is there. Signed-off-by:
-
Paulo Zanoni authored
It only has two checks now, so it makes sense to just move the code to the caller. Also take this opportunity to make no_fbc_reason make more sense: now we'll only list "no suitable CRTC for FBC" instead of maybe giving a reason why the last CRTC we checked was not selected, and we'll more consistently set the reason (e.g., if no primary planes are visible). Signed-off-by:
-
Paulo Zanoni authored
Extract that part of the code to a new function and call this function only once during intel_fbc_choose_crtc() instead of once per plane. Those checks are independent from planes/CRTCs. Signed-off-by:
-
Paulo Zanoni authored
Much simpler. Thanks to Ville for pointing this. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by:
-
Paulo Zanoni authored
We can just call it earlier, so do it. The goal of the loop is to get the plane's CRTC state, and we don't need it in order to call intel_fbc_can_choose(). Signed-off-by:
-
Chris Wilson authored
When supplying a view to vma_compare() it is required that the supplied i915_address_space is the global GTT. I tested the VMA instead (which is the current position in the rbtree and maybe from any address space). (This reapplies commit a44342ac ("drm/i915: Fix test on inputs for vma_compare()") as it was lost in the vma split) Reported-by:
Matthew Auld <matthew.auld@intel.com> Tested-by:
-
Paulo Zanoni authored
The previous spec version said "double Ytile planes minimum lines", and I interpreted this as referring to what the spec calls "Y tile minimum", but in fact it was referring to what the spec calls "Minimum Scanlines for Y tile". I noticed that Mahesh Kumar had a different interpretation, so I sent and email to the spec authors and got clarification on the correct meaning. Also, BSpec was updated and should be clear now. Fixes: ee3d532f ("drm/i915/gen9: unconditionally apply the memory bandwidth WA") Cc: stable@vger.kernel.org Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
-
Ville Syrjälä authored
My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT port information apparently didn't survive the reality of buggy VBTs. In this particular case we have a machine with a natice HDMI port, but the VBT tells us it's a DP++ port based on its capabilities. The dvo_port information in VBT does claim that we're dealing with a HDMI port though, but we have other machines which do the same even when they actually have DP++ ports. So that piece of information alone isn't sufficient to tell the two apart. After staring at a bunch of VBTs from various machines, I have to conclude that the only other semi-reliable clue we can use is the presence of the AUX channel in the VBT. On this particular machine AUX channel is specified as zero, whereas on some of the other machines which listed the DP++ port as HDMI have a non-zero AUX channel. I've also seen VBTs which have dvo_port a DP but have a zero AUX channel. I believe those we need to treat as DP ports, so we'll limit the AUX channel check to just the cases where dvo_port is HDMI. If we encounter any more serious failures with this heuristic I think we'll have to have to throw it out entirely. But that could mean that there is a risk of type 1 DVI dongle users getting greeted by a black screen, so I'd rather not go there unless absolutely necessary. v2: Remove the duplicate PORT_A check (Daniel) Fix some typos in the commit message Cc: Daniel Otero <daniel.otero@outlook.com> Cc: stable@vger.kernel.org Tested-by:Daniel Otero <daniel.otero@outlook.com> Fixes: d6199256 ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jani Nikula authored
The term "preliminary hardware support" has always caused confusion both among users and developers. It has always been about preliminary driver support for new hardware, and not so much about preliminary hardware. Of course, initially both the software and hardware are in early stages, but the distinction becomes more clear when the user picks up production hardware and an older kernel to go with it, with just the early support we had for the hardware at the time the kernel was released. The user has to specifically enable the alpha quality *driver* support for the hardware in that specific kernel version. Rename preliminary_hw_support to alpha_support to emphasize that the module parameter, config option, and flag are about software, not about hardware. Improve the language in help texts and debug logging as well. This appears to be a good time to do the change, as there are currently no platforms with preliminary^W alpha support. Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477909108-18696-1-git-send-email-jani.nikula@intel.com
-
Joonas Lahtinen authored
Update i915_driver_load kerneldoc to match code. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 11 Nov, 2016 7 commits
-
-
Chris Wilson authored
When we release the shmem backing storage, we make sure that the pages are coherent with the cpu cache. However, our clflush routine was skipping the flush as the object had no pages at release time. Fix this by explicitly flushing the sg_table we are decoupling. Fixes: 03ac84f1 ("drm/i915: Pass around sg_table to get_pages/put_pages backend") Signed-off-by:
-
Chris Wilson authored
In order to walk the list of all timelines, we currently require the struct_mutex. We are sometimes called prior to the struct_mutex being taken by the caller (i.e !I915_WAIT_LOCKED) in which case we can only trust the global execution timelines (as these are owned by the device). This means in the unlocked phase we can only wait upon the currently executing requests and not all queued. [ 175.743243] general protection fault: 0000 [#1] SMP [ 175.743263] Modules linked in: nls_iso8859_1 intel_rapl x86_pkg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel iwlwifi aesni_intel aes_x86_64 lrw snd_soc_rt5640 gf128mul snd_soc_rl6231 snd_soc_core glue_helper snd_compress snd_pcm_dmaengine snd_hda_codec_hdmi ablk_helper snd_hda_codec_realtek cryptd snd_hda_codec_generic serio_raw cfg80211 snd_hda_intel snd_hda_codec ir_lirc_codec snd_hda_core lirc_dev snd_hwdep snd_pcm lpc_ich mei_me mei snd_seq_midi shpchp snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer rc_rc6_mce acpi_als nuvoton_cir kfifo_buf rc_core snd industrialio snd_soc_sst_acpi soundcore snd_soc_sst_match i2c_designware_platform 8250_dw i2c_designware_core dw_dmac spi_pxa2xx_platform mac_hid acpi_pad parport_pc ppdev lp parport [ 175.743509] autofs4 i915 e1000e psmouse ptp pps_core xhci_pci ehci_pci ahci xhci_hcd ehci_hcd libahci video sdhci_acpi sdhci i2c_hid hid [ 175.743560] CPU: 2 PID: 2386 Comm: wtdg_monitor.sh Tainted: G U 4.9.0-rc4-nightly+ #2 [ 175.743581] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0358.2016.0606.1423 06/06/2016 [ 175.743603] task: ffff88024509ba80 task.stack: ffffc9007bd18000 [ 175.743618] RIP: 0010:[<ffffffffa01af29b>] [<ffffffffa01af29b>] i915_gem_wait_for_idle+0x3b/0x140 [i915] [ 175.743660] RSP: 0000:ffffc9007bd1b9b8 EFLAGS: 00010297 [ 175.743674] RAX: ffff88024489d248 RBX: 0000000000000000 RCX: 0000000000000000 [ 175.743691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880244898000 [ 175.743708] RBP: ffffc9007bd1b9f0 R08: 0000000000000000 R09: 0000000000000001 [ 175.743724] R10: 00000028eaf42792 R11: 0000000000000001 R12: dead000000000100 [ 175.743741] R13: dead000000000148 R14: ffffc9007bd1ba5f R15: 0000000000000005 [ 175.743758] FS: 00007f2638330700(0000) GS:ffff880256d00000(0000) knlGS:0000000000000000 [ 175.743777] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 175.743791] CR2: 00007f885c8cea40 CR3: 00000002416b5000 CR4: 00000000003406e0 [ 175.743808] Stack: [ 175.743816] ffff88024489d248 000000004509ba80 ffff880244898000 ffff88024509ba80 [ 175.743840] 00000000ffff8b69 ffffc9007bd1ba5f ffffc9007bd1ba5e ffffc9007bd1ba28 [ 175.743863] ffffffffa01b661d 00000000ffffffff 0000000000000000 ffff880244898000 [ 175.743886] Call Trace: [ 175.743906] [<ffffffffa01b661d>] i915_gem_shrinker_lock_uninterruptible.constprop.5+0x5d/0xc0 [i915] [ 175.743937] [<ffffffffa01b6cd0>] i915_gem_shrinker_oom+0x30/0x1b0 [i915] [ 175.743955] [<ffffffff8109ca79>] notifier_call_chain+0x49/0x70 [ 175.743971] [<ffffffff8109cd9d>] __blocking_notifier_call_chain+0x4d/0x70 [ 175.743988] [<ffffffff8109cdd6>] blocking_notifier_call_chain+0x16/0x20 [ 175.744005] [<ffffffff811885dc>] out_of_memory+0x22c/0x480 [ 175.744020] [<ffffffff81205542>] __alloc_pages_slowpath+0x851/0x8ec [ 175.744037] [<ffffffff8118ca51>] __alloc_pages_nodemask+0x2c1/0x310 [ 175.744054] [<ffffffff811d8ea8>] alloc_pages_current+0x88/0x120 [ 175.744070] [<ffffffff811833a4>] __page_cache_alloc+0xb4/0xc0 [ 175.744086] [<ffffffff811865ca>] filemap_fault+0x29a/0x500 [ 175.744101] [<ffffffff81299aa6>] ext4_filemap_fault+0x36/0x50 [ 175.744117] [<ffffffff811b3d4a>] __do_fault+0x6a/0xe0 [ 175.744131] [<ffffffff811b97ee>] handle_mm_fault+0xd0e/0x1330 [ 175.744147] [<ffffffff8106738c>] __do_page_fault+0x23c/0x4d0 [ 175.744162] [<ffffffff81067650>] do_page_fault+0x30/0x80 [ 175.744177] [<ffffffff817ffbe8>] page_fault+0x28/0x30 [ 175.744191] Code: 41 57 41 56 41 55 41 54 53 48 83 ec 10 4c 8b a7 48 52 00 00 89 75 d4 48 89 45 c8 49 39 c4 74 78 4d 8d 6c 24 48 41 bf 05 00 00 00 <49> 8b 5d 00 48 85 db 74 50 8b 83 20 01 00 00 85 c0 74 15 48 8b [ 175.744320] RIP [<ffffffffa01af29b>] i915_gem_wait_for_idle+0x3b/0x140 [i915] [ 175.744351] RSP <ffffc9007bd1b9b8> Fixes: 80b204bc ("drm/i915: Enable multiple timelines") Signed-off-by:
-
Tvrtko Ursulin authored
Signed-off-by:
David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478270568-7902-2-git-send-email-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
After this patch only conversion of INTEL_INFO(p)->gen to INTEL_GEN(dev_priv) remains before the __I915__ macro can be removed. v2: Tidy vlv_compute_wm. (David Weinehall) Signed-off-by:
-
Tvrtko Ursulin authored
A small selection of macros which can only accept dev_priv from now on and a resulting trickle of fixups. Signed-off-by:
-
Tvrtko Ursulin authored
A small selection of macros which can only accept dev_priv from now on and a resulting trickle of fixups. v2: Keep original order. (Ville Syrjala) Signed-off-by:
-
Tvrtko Ursulin authored
A small selection of macros which can only accept dev_priv from now on and a resulting trickle of fixups. Signed-off-by:
-
