We exponentially back off when we encounter connection errors.  If several
errors accumulate, we will eventually wait ages before even trying to
reconnect.

Fix this by resetting the backoff counter after a successful negotiation/
connection with the remote node.  Fixes ceph issue #2802.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>

Take the con mutex while we are initiating a ceph open.  This is necessary
because the may have previously been in use and then closed, which could
result in a racing workqueue running con_work().
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>

When we detect a mds session reset, close the old ceph_connection before
reopening it.  This ensures we clean up the old socket properly and keep
the ceph_connection state correct.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>

Previously, we were opportunistically initializing the bio_iter if it
appeared to be uninitialized in the middle of the read path.  The problem
is that a sequence like:

 - start reading message
 - initialize bio_iter
 - read half a message
 - messenger fault, reconnect
 - restart reading message
 - ** bio_iter now non-NULL, not reinitialized **
 - read past end of bio, crash

Instead, initialize the bio_iter unconditionally when we allocate/claim
the message for read.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>

The linger op registration (i.e., watch) modifies the object state.  As
such, the OSD will reply with success if it has already applied without
doing the associated side-effects (setting up the watch session state).
If we lose the ACK and resubmit, we will see success but the watch will not
be correctly registered and we won't get notifies.

To fix this, always resubmit the linger op with a new tid.  We accomplish
this by re-registering as a linger (i.e., 'registered') if we are not yet
registered.  Then the second loop will treat this just like a normal
case of re-registering.

This mirrors a similar fix on the userland ceph.git, commit 5dd68b95, and
ceph bug #2796.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>

Hold the mutex while twiddling all of the state bits to avoid possible
races.  While we're here, make not of why we cannot close the socket
directly.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>

We need to set error_msg to something useful before calling ceph_fault();
do so here for try_{read,write}().  This is more informative than

libceph: osd0 192.168.106.220:6801 (null)
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>

The server side recently added support for tuning some magic
crush variables. Decode these variables if they are present, or use the
default values if they are not present.

Corresponds to ceph.git commit 89af369c25f274fe62ef730e5e8aad0c54f1e5a5.
Signed-off-by: caleb miles <caleb.miles@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>

This is simply cleanup that will keep things more closely synced with the
userland code.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>

Several functions include a num_reply parameter, but it is never
used.  Just get rid of it everywhere--it seems to be something
that never got fully implemented.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Use the name "ceph_opts" consistently (rather than just "opt") for
pointers to a ceph_options structure.

Change the few spots that don't use "rbd_opts" for a rbd_options
pointer to match the rest.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Rename variables named "obj" which represent object names so they're
consistently named "object_name".

Rename the "cls" and "method" parameters in rbd_req_sync_exec()
to be "class_name" and "method_name", and make similar changes
to the names of local variables in that function representing
the lengths of those names.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

An rbd image is not a single object, but a logical construct made up
of an aggregation of objects.

Rename some fields in struct rbd_dev, in hopes of reinforcing this.
    obj         --> image_name
    obj_len     --> image_name_len
    obj_md_name --> header_name
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Most variables that represent a struct rbd_device are named
"rbd_dev", but in some cases "dev" is used instead.  Change all the
"dev" references so they use "rbd_dev" consistently, to make it
clear from the name that we're working with an RBD device (as
opposed to, for example, a struct device).  Similarly, change the
name of the "dev" field in struct rbd_notify_info to be "rbd_dev".
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

There is no need to impose a small limit the length of the snapshot
name recorded for an rbd image in a struct rbd_dev.  Remove the
limitation by allocating space for the snapshot name dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

There is no need to impose a small limit the length of the rbd image
name recorded in a struct rbd_dev.  Remove the limitation by
allocating space for the image name dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

There is no need to impose a small limit the length of the header
name recorded for an rbd image in a struct rbd_dev.  Remove the
limitation by allocating space for the header name dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

There is no need to impose a small limit the length of the object
prefix recorded for an rbd image in a struct rbd_image_header.
Remove the limitation by allocating space for the object prefix
dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

There is no need to impose a small limit the length of the pool name
recorded for an rbd image in a struct rbd_device.  Remove the
limitation by allocating space for the pool name ynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Add an entry under /sys/bus/rbd/devices/<N>/ named "pool_id" that
provides the id for the pool the rbd image is assocatied with.  This
is in addition to the pool name already provided.

Rename the "poolid" field in struct rbd_device  to be "pool_id".

Update the documentation to reflect the addition of this new entry.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Each rbd image has a name that forms the basis of all data objects
backing the device.  Old (format 1) images refer to this name as the
"block name," while new (format 2) images use the term "object
prefix" for this.

Change the field name in the in-core rbd image header structure to
reflect the more modern usage.  We intentionally keep the the name
"block_name" in the on-disk definition for format 1 image headers.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Define a new function dup_token(), to be used during argument
parsing for making dynamically-allocated copies of tokens being
parsed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

This adds a new utility routine which will return a dynamically-
allocated buffer containing a string that has been decoded from ceph
over-the-wire format.  It also returns the length of the string
if the address of a size variable is supplied to receive it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

In rbd_req_sync_notify_ack(), a local variable was needlessly being
used to hold a null pointer.  Just pass NULL instead.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

There is a BUG_ON() call that doesn't account for the single byte
structure version at the start of an encoded filepath in
ceph_encode_filepath().  Fix that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

d_parent is never NULL, and IS_ROOT() is the proper way to check for a
(non-self-referential) parent.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>

Add an atomic variable 'stopping' as flag in struct ceph_messenger,
set this flag to 1 in function ceph_destroy_client(), and add the condition code
in function ceph_data_ready() to test the flag value, if true(1), just return.
Signed-off-by: Guanjun He <gjhe@suse.com>
Reviewed-by: Sage Weil <sage@inktank.com>

In ancient times, the messenger could both initiate and accept connections.
An artifact if that was data structures to store/process an incoming
ceph_msg_connect request and send an outgoing ceph_msg_connect_reply.
Sadly, the negotiation code was referencing those structures and ignoring
important information (like the peer's connect_seq) from the correct ones.

Among other things, this fixes tight reconnect loops where the server sends
RETRY_SESSION and we (the client) retries with the same connect_seq as last
time.  This bug pretty easily triggered by injecting socket failures on the
MDS and running some fs workload like workunits/direct_io/test_sync_io.
Signed-off-by: Sage Weil <sage@inktank.com>

These don't strictly need to be initialized based on how they are used, but
it is good practice to do so.
Reported-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>

Initialize the type field for messages in a msgpool.  The caller was doing
this for osd ops, but not for the reply messages.
Reported-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>

It is possible to close a socket that is in the OPENING state.  For
example, it can happen if ceph_con_close() is called on the con before
the TCP connection is established.  con_work() will come around and shut
down the socket.
Signed-off-by: Sage Weil <sage@inktank.com>

Do not re-initialize the con on every connection attempt.  When we
ceph_con_close, there may still be work queued on the socket (e.g., to
close it), and re-initializing will clobber the work_struct state.
Signed-off-by: Sage Weil <sage@inktank.com>

The peer name may change on each open attempt, even when the connection is
reused.
Signed-off-by: Sage Weil <sage@inktank.com>

For some reason the declaration of ceph_con_get() and
ceph_con_put() did not get deleted in this commit:
    d59315ca libceph: drop ceph_con_get/put helpers and nref member

Clean that up.
Signed-off-by: Alex Elder <elder@inktank.com>

Sage liked the state diagram I put in my commit description so
I'm putting it in with the code.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

This patch gathers a few small changes in "net/ceph/messenger.c":
  out_msg_pos_next()
    - small logic change that mostly affects indentation
  write_partial_msg_pages().
    - use a local variable trail_off to represent the offset into
      a message of the trail portion of the data (if present)
    - once we are in the trail portion we will always be there, so we
      don't always need to check against our data position
    - avoid computing len twice after we've reached the trail
    - get rid of the variable tmpcrc, which is not needed
    - trail_off and trail_len never change so mark them const
    - update some comments
  read_partial_message_bio()
    - bio_iovec_idx() will never return an error, so don't bother
      checking for it
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

Currently a ceph connection enters a "CONNECTING" state when it
begins the process of (re-)connecting with its peer.  Once the two
ends have successfully exchanged their banner and addresses, an
additional NEGOTIATING bit is set in the ceph connection's state to
indicate the connection information exhange has begun.  The
CONNECTING bit/state continues to be set during this phase.

Rather than have the CONNECTING state continue while the NEGOTIATING
bit is set, interpret these two phases as distinct states.  In other
words, when NEGOTIATING is set, clear CONNECTING.  That way only
one of them will be active at a time.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

There are two phases in the process of linking together the two ends
of a ceph connection.  The first involves exchanging a banner and
IP addresses, and if that is successful a second phase exchanges
some detail about each side's connection capabilities.

When initiating a connection, the client side now queues to send
its information for both phases of this process at the same time.
This is probably a bit more efficient, but it is slightly messier
from a layering perspective in the code.

So rearrange things so that the client doesn't send the connection
information until it has received and processed the response in the
initial banner phase (in process_banner()).

Move the code (in the (con->sock == NULL) case in try_write()) that
prepares for writing the connection information, delaying doing that
until the banner exchange has completed.  Move the code that begins
the transition to this second "NEGOTIATING" phase out of
process_banner() and into its caller, so preparing to write the
connection information and preparing to read the response are
adjacent to each other.

Finally, preparing to write the connection information now requires
the output kvec to be reset in all cases, so move that into the
prepare_write_connect() and delete it from all callers.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

There is no state explicitly defined when a ceph connection is fully
operational.  So define one.

It's set when the connection sequence completes successfully, and is
cleared when the connection gets closed.

Be a little more careful when examining the old state when a socket
disconnect event is reported.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>

A connection state's NEGOTIATING bit gets set while in CONNECTING
state after we have successfully exchanged a ceph banner and IP
addresses with the connection's peer (the server).  But that bit
is not cleared again--at least not until another connection attempt
is initiated.

Instead, clear it as soon as the connection is fully established.
Also, clear it when a socket connection gets prematurely closed
in the midst of establishing a ceph connection (in case we had
reached the point where it was set).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>