- 25 May, 2019 40 commits
-
-
Yifeng Li authored
commit 5481115e upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with sm712fb framebuffer driver would cause the role of brightness up/down button to swap. Experiments showed the FPR30 register caused this behavior. Moreover, even if this register don't have side-effect on other systems, over- writing it is also highly questionable, since it was originally configurated by the motherboard manufacturer by hardwiring pull-down resistors to indicate the type of LCD panel. We should not mess with it. Stop writing to the SR30 (a.k.a FPR30) register. Signed-off-by:
Yifeng Li <tomli@tomli.me> Tested-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ard Biesheuvel authored
commit f8585539 upstream. The following commit: 38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB") updated the EFI framebuffer code to use memory mappings for the linear framebuffer that are permitted by the memory attributes described by the EFI memory map for the particular region, if the framebuffer happens to be covered by the EFI memory map (which is typically only the case for framebuffers in shared memory). This is required since non-x86 systems may require cacheable attributes for memory mappings that are shared with other masters (such as GPUs), and this information cannot be described by the Graphics Output Protocol (GOP) EFI protocol itself, and so we rely on the EFI memory map for this. As reported by James, this breaks some x86 systems: [ 1.173368] efifb: probing for efifb [ 1.173386] efifb: abort, cannot remap video memory 0x1d5000 @ 0xcf800000 [ 1.173395] Trying to free nonexistent resource <00000000cf800000-00000000cf9d4bff> [ 1.173413] efi-framebuffer: probe of efi-framebuffer.0 failed with error -5 The problem turns out to be that the memory map entry that describes the framebuffer has no memory attributes listed at all, and so we end up with a mem_flags value of 0x0. So work around this by ensuring that the memory map entry's attribute field has a sane value before using it to mask the set of usable attributes. Reported-by:
James Hilliard <james.hilliard1@gmail.com> Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # v4.19+ Cc: Borislav Petkov <bp@alien8.de> Cc: James Morse <james.morse@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when ...") Link: http://lkml.kernel.org/r/20190516213159.3530-2-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Dave Hansen authored
commit 5a28fc94 upstream. This is a bit of a mess, to put it mildly. But, it's a bug that only seems to have showed up in 4.20 but wasn't noticed until now, because nobody uses MPX. MPX has the arch_unmap() hook inside of munmap() because MPX uses bounds tables that protect other areas of memory. When memory is unmapped, there is also a need to unmap the MPX bounds tables. Barring this, unused bounds tables can eat 80% of the address space. But, the recursive do_munmap() that gets called vi arch_unmap() wreaks havoc with __do_munmap()'s state. It can result in freeing populated page tables, accessing bogus VMA state, double-freed VMAs and more. See the "long story" further below for the gory details. To fix this, call arch_unmap() before __do_unmap() has a chance to do anything meaningful. Also, remove the 'vma' argument and force the MPX code to do its own, independent VMA lookup. == UML / unicore32 impact == Remove unused 'vma' argument to arch_unmap(). No functional change. I compile tested this on UML but not unicore32. == powerpc impact == powerpc uses arch_unmap() well to watch for munmap() on the VDSO and zeroes out 'current->mm->context.vdso_base'. Moving arch_unmap() makes this happen earlier in __do_munmap(). But, 'vdso_base' seems to only be used in perf and in the signal delivery that happens near the return to userspace. I can not find any likely impact to powerpc, other than the zeroing happening a little earlier. powerpc does not use the 'vma' argument and is unaffected by its removal. I compile-tested a 64-bit powerpc defconfig. == x86 impact == For the common success case this is functionally identical to what was there before. For the munmap() failure case, it's possible that some MPX tables will be zapped for memory that continues to be in use. But, this is an extraordinarily unlikely scenario and the harm would be that MPX provides no protection since the bounds table got reset (zeroed). I can't imagine anyone doing this: ptr = mmap(); // use ptr ret = munmap(ptr); if (ret) // oh, there was an error, I'll // keep using ptr. Because if you're doing munmap(), you are *done* with the memory. There's probably no good data in there _anyway_. This passes the original reproducer from Richard Biener as well as the existing mpx selftests/. The long story: munmap() has a couple of pieces: 1. Find the affected VMA(s) 2. Split the start/end one(s) if neceesary 3. Pull the VMAs out of the rbtree 4. Actually zap the memory via unmap_region(), including freeing page tables (or queueing them to be freed). 5. Fix up some of the accounting (like fput()) and actually free the VMA itself. This specific ordering was actually introduced by: dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap") during the 4.20 merge window. The previous __do_munmap() code was actually safe because the only thing after arch_unmap() was remove_vma_list(). arch_unmap() could not see 'vma' in the rbtree because it was detached, so it is not even capable of doing operations unsafe for remove_vma_list()'s use of 'vma'. Richard Biener reported a test that shows this in dmesg: [1216548.787498] BUG: Bad rss-counter state mm:0000000017ce560b idx:1 val:551 [1216548.787500] BUG: non-zero pgtables_bytes on freeing mm: 24576 What triggered this was the recursive do_munmap() called via arch_unmap(). It was freeing page tables that has not been properly zapped. But, the problem was bigger than this. For one, arch_unmap() can free VMAs. But, the calling __do_munmap() has variables that *point* to VMAs and obviously can't handle them just getting freed while the pointer is still in use. I tried a couple of things here. First, I tried to fix the page table freeing problem in isolation, but I then found the VMA issue. I also tried having the MPX code return a flag if it modified the rbtree which would force __do_munmap() to re-walk to restart. That spiralled out of control in complexity pretty fast. Just moving arch_unmap() and accepting that the bonkers failure case might eat some bounds tables seems like the simplest viable fix. This was also reported in the following kernel bugzilla entry: https://bugzilla.kernel.org/show_bug.cgi?id=203123 There are some reports that this commit triggered this bug: dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap") While that commit certainly made the issues easier to hit, I believe the fundamental issue has been with us as long as MPX itself, thus the Fixes: tag below is for one of the original MPX commits. [ mingo: Minor edits to the changelog and the patch. ] Reported-by:
Richard Biener <rguenther@suse.de> Reported-by:
H.J. Lu <hjl.tools@gmail.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Yang Shi <yang.shi@linux.alibaba.com> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-um@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: stable@vger.kernel.org Fixes: dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap") Link: http://lkml.kernel.org/r/20190419194747.5E1AD6DC@viggo.jf.intel.comSigned-off-by:
-
Nathan Chancellor authored
commit 8ea58f1e upstream. Currently, this Makefile hardcodes GNU ar, meaning that if it is not available, there is no way to supply a different one and the build will fail. $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \ HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare ... AR /out/tools/objtool/libsubcmd.a /bin/sh: 1: ar: not found ... Follow the logic of HOST{CC,LD} and allow the user to specify a different ar tool via HOSTAR (which is used elsewhere in other tools/ Makefiles). Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com Link: https://github.com/ClangBuiltLinux/linux/issues/481Signed-off-by:
-
Florian Fainelli authored
commit 1b1f01b6 upstream. arch/mips/kernel/perf_event_mipsxx.c: In function 'mipsxx_pmu_enable_event': arch/mips/kernel/perf_event_mipsxx.c:326:21: error: unused variable 'event' [-Werror=unused-variable] struct perf_event *event = container_of(evt, struct perf_event, hw); ^~~~~ Fix this by making use of IS_ENABLED() to simplify the code and avoid unnecessary ifdefery. Fixes: 84002c88 ("MIPS: perf: Fix perf with MT counting other threads") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.18+ Signed-off-by:
-
Adrian Hunter authored
commit 1b6599a9 upstream. The sample timestamp is updated to ensure that the timestamp represents the time of the sample and not a branch that the decoder is still walking towards. The sample timestamp is updated when the decoder returns, but the decoder does not return for non-taken branches. Update the sample timestamp then also. Note that commit 3f04d98e ("perf intel-pt: Improve sample timestamp") was also a stable fix and appears, for example, in v4.4 stable tree as commit a4ebb58f ("perf intel-pt: Improve sample timestamp"). Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v4.4+ Fixes: 3f04d98e ("perf intel-pt: Improve sample timestamp") Link: http://lkml.kernel.org/r/20190510124143.27054-4-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit 61b6e08d upstream. The decoder uses its current timestamp in samples. Usually that is a timestamp that has already passed, but in some cases it is a timestamp for a branch that the decoder is walking towards, and consequently hasn't reached. The intel_pt_sample_time() function decides which is which, but was not handling TNT packets exactly correctly. In the case of TNT, the timestamp applies to the first branch, so the decoder must first walk to that branch. That means intel_pt_sample_time() should return true for TNT, and this patch makes that change. However, if the first branch is a non-taken branch (i.e. a 'N'), then intel_pt_sample_time() needs to return false for subsequent taken branches in the same TNT packet. To handle that, introduce a new state INTEL_PT_STATE_TNT_CONT to distinguish the cases. Note that commit 3f04d98e ("perf intel-pt: Improve sample timestamp") was also a stable fix and appears, for example, in v4.4 stable tree as commit a4ebb58f ("perf intel-pt: Improve sample timestamp"). Signed-off-by:
-
Adrian Hunter authored
commit 7ba8fa20 upstream. The timestamp used to determine if an instruction sample is made, is an estimate based on the number of instructions since the last known timestamp. A consequence is that it might go backwards, which results in extra samples. Change it so that a sample is only made when the timestamp goes forwards. Note this does not affect a sampling period of 0 or sampling periods specified as a count of instructions. Example: Before: $ perf script --itrace=i10us ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 10 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 8 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 6 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 4 instructions:u: 7fac71e2dab2 _dl_cache_libcmp+0xd2 (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222728: 16423 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222734: 12731 instructions:u: 7fac71e27938 _dl_name_match_p+0x68 (/lib/x86_64-linux-gnu/ld-2.28.so) ... After: $ perf script --itrace=i10us ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222728: 16479 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so) ... Signed-off-by:
-
Dmitry Osipenko authored
commit b906c056 upstream. Multiplying the Memory Controller clock rate by the tick count results in an integer overflow and in result the truncated tick value is being programmed into hardware, such that the GR3D memory client performance is reduced by two times. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Masami Hiramatsu authored
commit 3dd1f7f2 upstream. Fix to make the type of $comm "string". If we set the other type to $comm argument, it shows meaningless value or wrong data. Currently probe events allow us to set string array type (e.g. ":string[2]"), or other digit types like x8 on $comm. But since clearly $comm is just a string data, it should not be fetched by other types including array. Link: http://lkml.kernel.org/r/155723736241.9149.14582064184468574539.stgit@devnote2 Cc: Andreas Ziegler <andreas.ziegler@fau.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 53305928 ("tracing: probeevent: Introduce new argument fetching code") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Elazar Leibovich authored
commit cbe08bcb upstream. When reading only part of the id file, the ppos isn't tracked correctly. This is taken care by simple_read_from_buffer. Reading a single byte, and then the next byte would result EOF. While this seems like not a big deal, this breaks abstractions that reads information from files unbuffered. See for example https://github.com/golang/go/issues/29399 This code was mentioned as problematic in commit cd458ba9 ("tracing: Do not (ab)use trace_seq in event_id_read()") An example C code that show this bug is: #include <stdio.h> #include <stdint.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> int main(int argc, char **argv) { if (argc < 2) return 1; int fd = open(argv[1], O_RDONLY); char c; read(fd, &c, 1); printf("First %c\n", c); read(fd, &c, 1); printf("Second %c\n", c); } Then run with, e.g. sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id You'll notice you're getting the first character twice, instead of the first two characters in the id file. Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com Cc: Orit Wasserman <orit.was@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 23725aee ("ftrace: provide an id file for each event") Signed-off-by:
Elazar Leibovich <elazar@lightbitslabs.com> Signed-off-by:
-
Peter Zijlstra authored
commit 9e298e86 upstream. Nicolai Stange discovered[1] that if live kernel patching is enabled, and the function tracer started tracing the same function that was patched, the conversion of the fentry call site during the translation of going from calling the live kernel patch trampoline to the iterator trampoline, would have as slight window where it didn't call anything. As live kernel patching depends on ftrace to always call its code (to prevent the function being traced from being called, as it will redirect it). This small window would allow the old buggy function to be called, and this can cause undesirable results. Nicolai submitted new patches[2] but these were controversial. As this is similar to the static call emulation issues that came up a while ago[3]. But after some debate[4][5] adding a gap in the stack when entering the breakpoint handler allows for pushing the return address onto the stack to easily emulate a call. [1] http://lkml.kernel.org/r/20180726104029.7736-1-nstange@suse.de [2] http://lkml.kernel.org/r/20190427100639.15074-1-nstange@suse.de [3] http://lkml.kernel.org/r/3cf04e113d71c9f8e4be95fb84a510f085aa4afa.1541711457.git.jpoimboe@redhat.com [4] http://lkml.kernel.org/r/CAHk-=wh5OpheSU8Em_Q3Hg8qw_JtoijxOdPtHru6d+5K8TWM=A@mail.gmail.com [5] http://lkml.kernel.org/r/CAHk-=wjvQxY4DvPrJ6haPgAa6b906h=MwZXO6G8OtiTGe=N7_w@mail.gmail.com [ Live kernel patching is not implemented on x86_32, thus the emulate calls are only for x86_64. ] Cc: Andy Lutomirski <luto@kernel.org> Cc: Nicolai Stange <nstange@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: the arch/x86 maintainers <x86@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Juergen Gross <jgross@suse.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nayna Jain <nayna@linux.ibm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org> Cc: stable@vger.kernel.org Fixes: b700e7f0 ("livepatch: kernel: add support for live patching") Tested-by:
Nicolai Stange <nstange@suse.de> Reviewed-by:
Peter Zijlstra (Intel) <peterz@infradead.org> [ Changed to only implement emulated calls for x86_64 ] Signed-off-by:
-
Peter Zijlstra authored
commit 4b33dadf upstream. In order to allow breakpoints to emulate call instructions, they need to push the return address onto the stack. The x86_64 int3 handler adds a small gap to allow the stack to grow some. Use this gap to add the return address to be able to emulate a call instruction at the breakpoint location. These helper functions are added: int3_emulate_jmp(): changes the location of the regs->ip to return there. (The next two are only for x86_64) int3_emulate_push(): to push the address onto the gap in the stack int3_emulate_call(): push the return address and change regs->ip Cc: Andy Lutomirski <luto@kernel.org> Cc: Nicolai Stange <nstange@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: the arch/x86 maintainers <x86@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Juergen Gross <jgross@suse.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nayna Jain <nayna@linux.ibm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org> Cc: stable@vger.kernel.org Fixes: b700e7f0 ("livepatch: kernel: add support for live patching") Tested-by:
-
Josh Poimboeuf authored
commit 2700fefd upstream. To allow an int3 handler to emulate a call instruction, it must be able to push a return address onto the stack. Add a gap to the stack to allow the int3 handler to push the return address and change the return from int3 to jump straight to the emulated called function target. Link: http://lkml.kernel.org/r/20181130183917.hxmti5josgq4clti@treble Link: http://lkml.kernel.org/r/20190502162133.GX2623@hirez.programming.kicks-ass.net [ Note, this is needed to allow Live Kernel Patching to not miss calling a patched function when tracing is enabled. -- Steven Rostedt ] Cc: stable@vger.kernel.org Fixes: b700e7f0 ("livepatch: kernel: add support for live patching") Tested-by:
-
Jeff Layton authored
commit 00abf69d upstream. xfstest generic/452 was triggering a "Busy inodes after umount" warning. ceph was allowing the mount to go read-only without first flushing out dirty inodes in the cache. Ensure we sync out the filesystem before allowing a remount to proceed. Cc: stable@vger.kernel.org Link: http://tracker.ceph.com/issues/39571Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
commit 43a0541e upstream. Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of the TLB_FLUSH register differs from later Tegra generations that have 128 ASID's. In a result the PTE's are now flushed correctly from TLB and this fixes problems with graphics (randomly failing tests) on Tegra30. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Chris Packham authored
commit 259799ea upstream. Use gen_rtx_set instead of gen_rtx_SET. The former is a wrapper macro that handles the difference between GCC versions implementing the latter. This fixes the following error on my system with g++ 5.4.0 as the host compiler HOSTCXX -fPIC scripts/gcc-plugins/arm_ssp_per_task_plugin.o scripts/gcc-plugins/arm_ssp_per_task_plugin.c:42:14: error: macro "gen_rtx_SET" requires 3 arguments, but only 2 given mask)), ^ scripts/gcc-plugins/arm_ssp_per_task_plugin.c: In function ‘unsigned int arm_pertask_ssp_rtl_execute()’: scripts/gcc-plugins/arm_ssp_per_task_plugin.c:39:20: error: ‘gen_rtx_SET’ was not declared in this scope emit_insn_before(gen_rtx_SET Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Fixes: 189af465 ("ARM: smp: add support for per-task stack canaries") Cc: stable@vger.kernel.org Tested-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Amir Goldstein authored
commit 4d8e7055 upstream. __fsnotify_parent() has an optimization in place to avoid unneeded take_dentry_name_snapshot(). When fsnotify_nameremove() was changed not to call __fsnotify_parent(), we left out the optimization. Kernel test robot reported a 5% performance regression in concurrent unlink() workload. Reported-by:
kernel test robot <rong.a.chen@intel.com> Link: https://lore.kernel.org/lkml/20190505062153.GG29809@shao2-debian/ Link: https://lore.kernel.org/linux-fsdevel/20190104090357.GD22409@quack2.suse.cz/ Fixes: 5f02a877 ("fsnotify: annotate directory entry modification events") CC: stable@vger.kernel.org Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Amir Goldstein authored
commit 3428030d upstream. Generalize the helper ovl_open_maybe_copy_up() and use it to copy up file with data before FS_IOC_SETFLAGS ioctl. The FS_IOC_SETFLAGS ioctl is a bit of an odd ball in vfs, which probably caused the confusion. File may be open O_RDONLY, but ioctl modifies the file. VFS does not call mnt_want_write_file() nor lock inode mutex, but fs-specific code for FS_IOC_SETFLAGS does. So ovl_ioctl() calls mnt_want_write_file() for the overlay file, and fs-specific code calls mnt_want_write_file() for upper fs file, but there was no call for ovl_want_write() for copy up duration which prevents overlayfs from copying up on a frozen upper fs. Fixes: dab5ca8f ("ovl: add lsattr/chattr support") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Liu Bo authored
commit 0cbade02 upstream. fstests generic/228 reported this failure that fuse fallocate does not honor what 'ulimit -f' has set. This adds the necessary inode_newsize_ok() check. Signed-off-by:
Liu Bo <bo.liu@linux.alibaba.com> Fixes: 05ba1f08 ("fuse: add FALLOCATE operation") Cc: <stable@vger.kernel.org> # v3.5 Signed-off-by:
-
Miklos Szeredi authored
commit 9de5be06 upstream. Writepage requests were cropped to i_size & 0xffffffff, which meant that mmaped writes to any file larger than 4G might be silently discarded. Fix by storing the file size in a properly sized variable (loff_t instead of size_t). Reported-by:
Antonio SJ Musumeci <trapexit@spawn.link> Fixes: 6eaf4782 ("fuse: writepages: crop secondary requests") Cc: <stable@vger.kernel.org> # v3.13 Signed-off-by:
-
Mikulas Patocka authored
commit babc250e upstream. Rendering calls may be done simultaneously from the workqueue, dlfb_ops_write, dlfb_ops_ioctl, dlfb_ops_set_par and dlfb_dpy_deferred_io. The code is robust enough so that it won't crash on concurrent rendering. However, concurrent rendering may cause display corruption if the same pixel is simultaneously being rendered. In order to avoid this corruption, this patch adds a mutex around the rendering calls. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Bernie Thompson <bernie@plugable.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: <stable@vger.kernel.org> [b.zolnierkie: replace "dlfb:" with "uldfb:" in the patch summary] Signed-off-by:
-
Mikulas Patocka authored
commit 6b11f9d8 upstream. If a framebuffer device is used as a console, the rendering calls (copyarea, fillrect, imageblit) may be done with the console spinlock held. On udlfb, these function call dlfb_handle_damage that takes a blocking semaphore before acquiring an URB. In order to fix the bug, this patch changes the calls copyarea, fillrect and imageblit to offload USB work to a workqueue. A side effect of this patch is 3x improvement in console scrolling speed because the device doesn't have to be updated after each copyarea call. Signed-off-by:
-
Mikulas Patocka authored
commit bd86b6c5 upstream. Remove the unused parameter "data" and unused variable "ret". Signed-off-by:
-
Jonas Karlman authored
commit fb903392 upstream. This patch fixes definition of several clock gate and select register that is wrong for rk3328 referring to the TRM and vendor kernel. Also use correct number of softrst registers. Fix clock definition for: - clk_crypto - aclk_h265 - pclk_h265 - aclk_h264 - hclk_h264 - aclk_axisram - aclk_gmac - aclk_usb3otg Fixes: fe3511ad ("clk: rockchip: add clock controller for rk3328") Cc: stable@vger.kernel.org Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Tested-by:
Peter Geis <pgwipeout@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Owen Chen authored
commit be17ca6a upstream. PLLs with tuner_en bit, such as APLL1, need to disable tuner_en before apply new frequency settings, or the new frequency settings (pcw) will not be applied. The tuner_en bit will be disabled during changing PLL rate and be restored after new settings applied. Fixes: e2f744a8 (clk: mediatek: Add MT2712 clock support) Cc: <stable@vger.kernel.org> Signed-off-by:
Owen Chen <owen.chen@mediatek.com> Signed-off-by:
Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by:
James Liao <jamesjj.liao@mediatek.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Dmitry Osipenko authored
commit 40db569d upstream. There are wrongly set parenthesis in the code that are resulting in a wrong configuration being programmed for PLLM. The original fix was made by Danny Huang in the downstream kernel. The patch was tested on Nyan Big Tegra124 chromebook, PLLM rate changing works correctly now and system doesn't lock up after changing the PLLM rate due to EMC scaling. Cc: <stable@vger.kernel.org> Tested-by:
Steev Klimaszewski <steev@kali.org> Signed-off-by:
Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by:
-
Leo Yan authored
commit 9f77a606 upstream. clk_gate_ufs_subsys is a system bus clock, turning off it will introduce lockup issue during system suspend flow. Let's mark clk_gate_ufs_subsys as critical clock, thus keeps it on during system suspend and resume. Fixes: d374e6fd ("clk: hisilicon: Add clock driver for hi3660 SoC") Cc: stable@vger.kernel.org Cc: Zhong Kaihua <zhongkaihua@huawei.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Suggested-by:
Dong Zhang <zhangdong46@hisilicon.com> Signed-off-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
-
Olga Kornievskaia authored
commit b1029c9b upstream. If we fail to find a good deviceid while trying to pnfs instead of propogating an error back fallback to doing IO to the MDS. Currently, code with fals the IO with EINVAL. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Fixes: 8d40b0f1 ("NFS filelayout:call GETDEVICEINFO after pnfs_layout_process completes" Cc: stable@vger.kernel.org # v4.11+ Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
ZhangXiaoxu authored
commit f02f3755 upstream. stat command with soft mount never return after server is stopped. When alloc a new client, the state of the client will be set to NFS4CLNT_LEASE_EXPIRED. When the server is stopped, the state manager will work, and accord the state to recover. But the state is NFS4CLNT_LEASE_EXPIRED, it will drain the slot table and lead other task to wait queue, until the client recovered. Then the stat command is hung. When discover server trunking, the client will renew the lease, but check the client state, it lead the client state corruption. So, we need to call state manager to recover it when detect server ip trunking. Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Leon Romanovsky authored
commit b79656ed upstream. Systemd triggers the following warning during IPoIB device load: mlx5_core 0000:00:0c.0 ib0: "systemd-udevd" wants to know my dev_id. Should it look at dev_port instead? See Documentation/ABI/testing/sysfs-class-net for more info. This is caused due to user space attempt to differentiate old systems without dev_port and new systems with dev_port. In case dev_port will be zero, the systemd will try to read dev_id instead. There is no need to print a warning in such case, because it is valid situation and it is needed to ensure systemd compatibility with old kernels. Link: https://github.com/systemd/systemd/blob/master/src/udev/udev-builtin-net_id.c#L358 Cc: <stable@vger.kernel.org> # 4.19 Fixes: f6350da4 ("IB/ipoib: Log sysfs 'dev_id' accesses from userspace") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
commit ddcdc368 upstream. get_zeroed_page() returns a virtual address for the page which is better than allocating a struct page and doing a permanent kmap on it. Cc: stable@vger.kernel.org Signed-off-by:
Haggai Eran <haggaie@mellanox.com> Signed-off-by:
-
Steve Longerbeam authored
commit dee747f8 upstream. The second IPU internal sub-devices were being registered and links to them created even when the second IPU is not present. This is wrong for i.MX6 S/DL and i.MX53 which have only a single IPU. Fixes: e1302912 ("[media] media: Add i.MX media core driver") Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Steve Longerbeam authored
commit 085b26da upstream. For the functions that add and remove the internal IPU subdevice descriptors, rename them to make clear they are the subdevs internal to the IPU. Also rename the platform data structure for the internal IPU subdevices. No functional changes. Signed-off-by:
-
Steve Longerbeam authored
commit 107927fa upstream. In imx_media_create_csi_of_links(), the 'struct v4l2_fwnode_link' must be cleared for each endpoint iteration, otherwise if the remote port has no "reg" property, link.remote_port will not be reset to zero. This was discovered on the i.MX53 SMD board, since the OV5642 connects directly to ipu1_csi0 and has a single source port with no "reg" property. Fixes: 621b08ea ("media: staging/imx: remove static media link arrays") Signed-off-by:
-
Steve Longerbeam authored
commit 904371f9 upstream. On i.MX6, the nearest upstream entity to the CSI can only be the CSI video muxes or the Synopsys DW MIPI CSI-2 receiver. However the i.MX53 has no CSI video muxes or a MIPI CSI-2 receiver. So allow for the nearest upstream entity to the CSI to be something other than those. Fixes: bf3cfaa7 ("media: staging/imx: get CSI bus type from nearest upstream entity") Signed-off-by:
-
Arnd Bergmann authored
commit 63604a14 upstream. I previously added an RC_CORE dependency here, but missed the corner case of CONFIG_VIDEO_SECO_CEC=y with CONFIG_RC_CORE=m, which still causes a link error: drivers/media/platform/seco-cec/seco-cec.o: In function `secocec_probe': seco-cec.c:(.text+0x1b8): undefined reference to `devm_rc_allocate_device' seco-cec.c:(.text+0x2e8): undefined reference to `devm_rc_register_device' drivers/media/platform/seco-cec/seco-cec.o: In function `secocec_irq_handler': seco-cec.c:(.text+0xa2c): undefined reference to `rc_keydown' Refine the dependency to disallow building the RC subdriver in this case. This is the same logic we apply in other drivers like it. Fixes: f27dd0ad ("media: seco-cec: fix RC_CORE dependency") Cc: <stable@vger.kernel.org> # 5.1 Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Janusz Krzysztofik authored
commit 933c1320 upstream. After removal of clock_start() from before soc_camera_init_i2c() in soc_camera_probe() by commit 9aea470b ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") introduced in v3.11, the ov6650 driver could no longer probe the sensor successfully because its clock was no longer turned on in advance. The issue was initially worked around by adding that missing clock_start() equivalent to OMAP1 camera interface driver - the only user of this sensor - but a propoer fix should be rather implemented in the sensor driver code itself. Fix the issue by inserting a delay between the clock is turned on and the sensor I2C registers are read for the first time. Tested on Amstrad Delta with now out of tree but still locally maintained omap1_camera host driver. Fixes: 9aea470b ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Colin Ian King authored
commit e6577cb5 upstream. There seems to be a missing bit-wise or operator when setting val, fix this by adding it in. Fixes: 2796ceb0 ("phy: ti-pipe3: Update pcie phy settings") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Christoph Probst authored
commit 6a54b2e0 upstream. Change strcat to strncpy in the "None" case to fix a buffer overflow when cinode->oplock is reset to 0 by another thread accessing the same cinode. It is never valid to append "None" to any other message. Consolidate multiple writes to cinode->oplock to reduce raciness. Signed-off-by:
Christoph Probst <kernel@probst.it> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
