- 09 Jul, 2008 3 commits
-
-
Luis Carlos Cobo authored
If a mesh or ad-hoc interface is brought up and later it is replaced by managed interface, the managed interface will keep transmitting the beacons that were configured for the former interface. This patch fixes that behaviour. Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
As soon as init_registers() was called, the rt2400/rt2500 would start raising beacondone interrupts. Since this is highly premature since no beacons were provided yet, we should initialize the synchronization register to 0. This will make all drivers initialize it to 0 regardless if they are raising beacondone interrupts or not, since it only makes sense to have it completely disabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mattias Nissler authored
This removes the fast_start parameter from the rc_pid parameters information and instead uses the parameter macro when initializing the rc_pid state. Since the parameter is only used on initialization, there is no point of making exporting it via debugfs. This also fixes uninitialized memory references to the fast_start and norm_offset parameters detected by the kmemcheck utility. Thanks to Vegard Nossum for reporting the bug. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 08 Jul, 2008 6 commits
-
-
Vlad Yasevich authored
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrey Vagin authored
Consider the following scenario: ipv6_del_addr(ifp) ipv6_ifa_notify(RTM_DELADDR, ifp) ip6_del_rt(ifp->rt) after returning from the ipv6_ifa_notify and enabling BH-s back, but *before* calling the addrconf_del_timer the ifp->timer fires and: addrconf_dad_timer(ifp) addrconf_dad_completed(ifp) ipv6_ifa_notify(RTM_NEWADDR, ifp) ip6_ins_rt(ifp->rt) then return back to the ipv6_del_addr and: in6_ifa_put(ifp) inet6_ifa_finish_destroy(ifp) dst_release(&ifp->rt->u.dst) After this we have an ifp->rt inserted into fib6 lists, but queued for gc, which in turn can result in oopses in the fib6_run_gc. Maybe some other nasty things, but we caught only the oops in gc so far. The solution is to disarm the ifp->timer before flushing the rt from it. Signed-off-by: Andrey Vagin <avagin@parallels.com> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julius Volz authored
Fix an incorrect return value check of genlmsg_put() in irda_nl_get_mode(). genlmsg_put() does not use ERR_PTR() to encode return values, it just returns NULL on error. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ville Syrjala authored
HP OmniBook 500's DSDT code changes the HID of the FIR device from NSC6001 to HWPC224 when run under an "NT" operating system. Add the new ID to the pnp device id table. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wang Chen authored
1. dma should be freed when dma2 request fail. 2. dma2 should be freed too when device close. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
If we don't have the buffer space or memory allocations fail, the data chunk is dropped, but TSN is still reported as received. This introduced a data loss that can't be recovered. We should only mark TSNs are received after memory allocations finish. The one exception is the invalid stream identifier, but that's due to user error and is reported back to the user. This was noticed by Michael Tuexen. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Jul, 2008 7 commits
-
-
Vladimir Koutny authored
Don't report a 'selected' IBSS in sta_find_ibss when none was found. Signed-off-by: Vladimir Koutny <vlado@ksp.sk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
On embedded devices we must not route the interrupts through the PCI core, if our host-bus is not PCI. Reported-by: Steve Brown <sbrown@cortland.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Firat Birlik authored
I would like to inform you of our zd1211 based usb wifi adapter (AirTies WUS-201), which works with the zd1211rw driver with the following device id definition. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
Currently the ieee80211_hw->workqueue is flushed each time an interface is being removed. However most scheduled work is not interface specific but device specific, for example things like periodic work for link tuners. This patch will move the flush_workqueue() call to directly behind the call to ops->stop() to make sure the workqueue is only flushed when all interfaces are gone and there really shouldn't be any scheduled work in the drivers left. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Guy Cohen authored
Putting netif_carrier_on before configuring the driver/device with the new association state may cause a race (tx frames may be sent before configuration is done) Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Darren Jenkins authored
Coverity CID: 2265 NEGATIVE_RETURNS "rate" is of an unsigned type, and the code requires a signed type. The following patch makes it so. Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
This corrects this kernel.org bug: http://bugzilla.kernel.org/show_bug.cgi?id=9701Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 06 Jul, 2008 1 commit
-
-
Oliver Hartkopp authored
Even though the CAN netlayer only deals with CAN netdevices, the netlayer interface to the userspace and to the device layer should perform some sanity checks. This patch adds several sanity checks that mainly prevent userspace apps to send broken content into the system that may be misinterpreted by some other userspace application. Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de> Acked-by: Andre Naujoks <nautsch@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Jul, 2008 10 commits
-
-
Laurent Pinchart authored
The restart() function is called when the link state changes and resets multicast and promiscuous settings. This patch restores those settings at the end of restart(). Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Sathya Narayanan authored
Short packets has to be discarded by the driver. So this patch addresses the issue of discarding the short packets of size lesser then ethernet header size. Signed-off-by: Sathya Narayanan <sathyan@teamf1.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Sathya Narayanan authored
The descriptor pointers were not initialized to NIL values, so it was poiniting to some random addresses which was completely invalid. This fix takes care of initializing the descriptor to NIL values and clearing the valid descriptors on clean ring operation. Signed-off-by: Sathya Narayanan <sathyan@teamf1.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Roland Dreier authored
iph->tot_len is stored in network byte order, so access it using ntohs(). This doesn't have any real world impact on pasemi_mac, since the device only exists as part of a big-endian system-on-chip, but fixing this gets rid of a sparse warning and avoids having a bad example in the tree. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Roland Dreier authored
iph->tot_len is stored in network byte order, so access it using ntohs(). This doesn't have any real world impact on ehea, since ehea only exists for big-endian platfroms (at the moment at least) but fixing this gets rid of a sparse warning and avoids having a bad example in the tree. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jan-Bernd Themann authored
When ehea_stop is called the function cancel_work_sync(&port->reset_task) is used to ensure that the reset task is not running anymore. We need an additional flag to ensure that it can not be scheduled after this call again for a certain time. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jan-Bernd Themann authored
Required to allow distros to easily detect when ehea module needs to be loaded Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jan-Bernd Themann authored
A mutex has to be replaced by spinlocks as it can be called from a context which does not allow sleeping. The kzalloc flag GFP_KERNEL has to be replaced by GFP_ATOMIC for the same reason. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Tobias Diedrich authored
After enabling CONFIG_LOCKDEP and CONFIG_PROVE_LOCKING I get the following warning when ethtool -s is first called on one of the forcedeth ports: ================================= [ INFO: inconsistent lock state ] 2.6.26-rc4 #28 --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. ethtool/1985 [HC0[0]:SC0[1]:HE1:SE0] takes: (&np->lock){++..}, at: [<ffffffffa000c5fd>] nv_set_settings+0xc8/0x3de [forcedeth] {in-hardirq-W} state was registered at: [<ffffffffffffffff>] 0xffffffffffffffff irq event stamp: 3606 hardirqs last enabled at (3605): [<ffffffff8068106f>] _spin_unlock_irqrestore+0x3f/0x68 hardirqs last disabled at (3604): [<ffffffff80680d38>] _spin_lock_irqsave+0x13/0x46 softirqs last enabled at (3534): [<ffffffff80246ba5>] __do_softirq+0xbc/0xc5 softirqs last disabled at (3606): [<ffffffff80680b33>] _spin_lock_bh+0x11/0x41 other info that might help us debug this: 2 locks held by ethtool/1985: #0: (rtnl_mutex){--..}, at: [<ffffffff80596072>] rtnl_lock+0x12/0x14 #1: (_xmit_ETHER){-+..}, at: [<ffffffffa000c5e8>] nv_set_settings+0xb3/0x3de [forcedeth] stack backtrace: Pid: 1985, comm: ethtool Not tainted 2.6.26-rc4 #28 Call Trace: [<ffffffff8025f190>] print_usage_bug+0x162/0x173 [<ffffffff8025fa8b>] mark_lock+0x231/0x41f [<ffffffff802607cf>] __lock_acquire+0x4e7/0xcac [<ffffffff8025fe64>] ? trace_hardirqs_on+0xf1/0x115 [<ffffffff80272c3a>] ? disable_irq_nosync+0x6f/0x7b [<ffffffff80261375>] lock_acquire+0x55/0x6e [<ffffffffa000c5fd>] ? :forcedeth:nv_set_settings+0xc8/0x3de [<ffffffff80680b15>] _spin_lock+0x2f/0x3c [<ffffffffa000c5fd>] :forcedeth:nv_set_settings+0xc8/0x3de [<ffffffff8058f8bb>] dev_ethtool+0x186/0xea3 [<ffffffff8067f446>] ? mutex_lock_nested+0x243/0x275 [<ffffffff8025df2b>] ? debug_mutex_free_waiter+0x46/0x4a [<ffffffff8067f469>] ? mutex_lock_nested+0x266/0x275 [<ffffffff8058e1ce>] dev_ioctl+0x4eb/0x600 [<ffffffff8068106f>] ? _spin_unlock_irqrestore+0x3f/0x68 [<ffffffff80580f91>] sock_ioctl+0x1f5/0x202 [<ffffffff802a322e>] vfs_ioctl+0x2a/0x77 [<ffffffff802a34d6>] do_vfs_ioctl+0x25b/0x270 [<ffffffff806807b6>] ? trace_hardirqs_on_thunk+0x35/0x3a [<ffffffff802a352d>] sys_ioctl+0x42/0x65 [<ffffffff8021fffb>] system_call_after_swapgs+0x7b/0x80 This is caused by the following snippet in nv_set_settings: netif_carrier_off(dev); if (netif_running(dev)) { nv_disable_irq(dev); netif_tx_lock_bh(dev); spin_lock(&np->lock); /* stop engines */ nv_stop_rxtx(dev); spin_unlock(&np->lock); netif_tx_unlock_bh(dev); } Because of nv_disable_irq this is probably not really a problem though (I guess) and replacing the spin_lock with spin_lock_irqsave could keep interrupts disabled for a longer period of time because of delays in nv_stop_rx and nv_stop_tx. Signed-off-by: Tobias Diedrich <ranma+kernel@tdiedrich.de> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Krzysztof Halasa authored
Commit 4c13eb66 ([ETH]: Make eth_type_trans set skb->dev like the other *_type_trans) removed skb->dev assignment from hdlc_fr.c:fr_rx(). Unfortunately it was also needed for cases other than eth_type_trans(). Adding it back. It's quite serious and may be a security risk as it causes a wrong input interface indication (the physical hdlcX instead of logical pvcX). Probably -stable class fix. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
- 03 Jul, 2008 13 commits
-
-
Patrick McHardy authored
Unregistering a bridge device may cause virtual devices stacked on the bridge, like vlan or macvlan devices, to be unregistered as well. br_cleanup_bridges() uses for_each_netdev_safe() to iterate over all devices during cleanup. This is not enough however, if one of the additionally unregistered devices is next in the list to the bridge device, it will get freed as well and the iteration continues on the freed element. Restart iteration after each bridge device removal from the beginning to fix this, similar to what rtnl_link_unregister() does. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Octavian Purdila authored
<used> should be of type int (not size_t) since recv_actor can return negative values and it is also used in a < 0 comparison. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Morton authored
alpha: net/ipv4/tcp.c: In function 'tcp_calc_md5_hash': net/ipv4/tcp.c:2479: error: implicit declaration of function 'sg_init_table' net/ipv4/tcp.c:2482: error: implicit declaration of function 'sg_set_buf' net/ipv4/tcp.c:2507: error: implicit declaration of function 'sg_mark_end' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: acpiphp: cleanup notify handler on all root bridges PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev. PCI: Restrict VPD read permission to root
-
git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds authored
* 'i2c-fix' of git://aeryn.fluff.org.uk/bjdooks/linux: I2C: S3C2410: Add MODULE_ALIAS() for s3c2440 device. I2C: S3C2410: Fixup error codes returned rom a transfer. I2C: S3C2410: Check ACK on byte transmission
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block: Properly notify block layer of sync writes block: Fix the starving writes bug in the anticipatory IO scheduler
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] export account_system_vtime [IA64] Bugfix for system with 32 cpus
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (8178): uvc: Fix compilation breakage for the other drivers, if uvc is selected V4L/DVB (8145a): USB Video Class driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix /proc/ide/ide?/mate reporting Revert "BAST: Remove old IDE driver"
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5131/1: Annotate platform_secondary_init with trace_hardirqs_off [ARM] 5117/1: pxafb: fix __devinit/exit annotations [ARM] Export dma_sync_sg_for_device() [ARM] 5109/1: Mark rtc sa1100 driver as wakeup source before registering it [ARM] 5116/1: pxafb: cleanup and fix order of failure handling [ARM] 5115/1: pxafb: fix ifdef for command line option handling ARM: OMAP: Correcting the gpmc prefetch control register address ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq
-
Alan Cox authored
Not sure how this came to get inverted but it appears to have been my mess up. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: fix divide error when trying to configure rt_period to zero
-