When looking at the code I noticed we don't actually compute
sgp->power_orig correctly for groups, fix that.

Currently the only consumer of that value is fix_small_capacity()
which is only used on POWER7+ and that code excludes this case by
being limited to SD_SHARE_CPUPOWER which is only ever set on the SMT
domain which must be the lowest domain and this has singleton groups.

So nothing should be affected by this change.

Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-db2pe0vxwunv37plc7onnugj@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Try and reduce the local_group logic by pulling most of it into
update_sd_lb_stats.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-mgezl354xgyhiyrte78fdkpd@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Change the group_imb detection from the old 'load-spike' detector to
an actual imbalance detector. We set it from the lower domain balance
pass when it fails to create a balance in the presence of task
affinities.

The advantage is that this should no longer generate the false
positive group_imb conditions generated by transient load spikes from
the normal balancing/bulk-wakeup etc. behaviour.

While I haven't actually observed those they could happen.

I'm not entirely happy with this patch; it somehow feels a little
fragile.

Nor does it solve the biggest issue I have with the group_imb code; it
it still a fragile construct in that once we 'fixed' the imbalance
we'll not detect the group_imb again and could end up re-creating it.

That said, this patch does seem to preserve behaviour for the
described degenerate case. In particular on my 2*6*2 wsm-ep:

  taskset -c 3-11 bash -c 'for ((i=0;i<9;i++)) do while :; do :; done & done'

ends up with 9 spinners, each on their own CPU; whereas if you disable
the group_imb code that typically doesn't happen (you'll get one pair
sharing a CPU most of the time).
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-36fpbgl39dv4u51b6yz2ypz5@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

2bd2d6f2 ("sched: Replace use of entity_key()") had remove the
entity_key() which function is to subtract a tasks vruntime by
its groups minvruntime as the rbtree key.
The phrase "there is a subtraction using rq->cfs.min_vruntime
to account for possible wraparounds" in documentation feels strange
and meaningless. So remove it.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378706740-7500-1-git-send-email-huawei.libin@huawei.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Emmanuel reported that /proc/sched_debug didn't report the right PIDs
when using namespaces, cure this.
Reported-by: Emmanuel Deloget <emmanuel.deloget@efixo.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130909110141.GM31370@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

There is a small race between copy_process() and cgroup_attach_task()
where child->se.parent,cfs_rq points to invalid (old) ones.

        parent doing fork()      | someone moving the parent to another cgroup
  -------------------------------+---------------------------------------------
    copy_process()
      + dup_task_struct()
        -> parent->se is copied to child->se.
           se.parent,cfs_rq of them point to old ones.

                                     cgroup_attach_task()
                                       + cgroup_task_migrate()
                                         -> parent->cgroup is updated.
                                       + cpu_cgroup_attach()
                                         + sched_move_task()
                                           + task_move_group_fair()
                                             +- set_task_rq()
                                                -> se.parent,cfs_rq of parent
                                                   are updated.

      + cgroup_fork()
        -> parent->cgroup is copied to child->cgroup. (*1)
      + sched_fork()
        + task_fork_fair()
          -> se.parent,cfs_rq of child are accessed
             while they point to old ones. (*2)

In the worst case, this bug can lead to "use-after-free" and cause a panic,
because it's new cgroup's refcount that is incremented at (*1),
so the old cgroup(and related data) can be freed before (*2).

In fact, a panic caused by this bug was originally caught in RHEL6.4.

    BUG: unable to handle kernel NULL pointer dereference at (null)
    IP: [<ffffffff81051e3e>] sched_slice+0x6e/0xa0
    [...]
    Call Trace:
     [<ffffffff81051f25>] place_entity+0x75/0xa0
     [<ffffffff81056a3a>] task_fork_fair+0xaa/0x160
     [<ffffffff81063c0b>] sched_fork+0x6b/0x140
     [<ffffffff8106c3c2>] copy_process+0x5b2/0x1450
     [<ffffffff81063b49>] ? wake_up_new_task+0xd9/0x130
     [<ffffffff8106d2f4>] do_fork+0x94/0x460
     [<ffffffff81072a9e>] ? sys_wait4+0xae/0x100
     [<ffffffff81009598>] sys_clone+0x28/0x30
     [<ffffffff8100b393>] stub_clone+0x13/0x20
     [<ffffffff8100b072>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/039601ceae06$733d3130$59b79390$@mxp.nes.nec.co.jpSigned-off-by: Ingo Molnar <mingo@kernel.org>

Commit 23f0d209 ("sched: Factor out code to should_we_balance()")
introduces the should_we_balance() function.  This function should
return 1 if this cpu is appropriate for balancing. But the newly
introduced code doesn't do so, it returns 0 instead of 1.

This introduces performance regression, reported by Dave Chinner:

                        v4 filesystem           v5 filesystem
3.11+xfsdev:            220k files/s            225k files/s
3.12-git                180k files/s            185k files/s
3.12-git-revert         245k files/s            247k files/s

You can find more detailed information at:

  https://lkml.org/lkml/2013/9/10/1

This patch corrects the return value of should_we_balance()
function as orignally intended.

With this patch, Dave Chinner reports that the regression is gone:

                        v4 filesystem           v5 filesystem
3.11+xfsdev:            220k files/s            225k files/s
3.12-git                180k files/s            185k files/s
3.12-git-revert         245k files/s            247k files/s
3.12-git-fix            249k files/s            248k files/s
Reported-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Link: http://lkml.kernel.org/r/20130910065448.GA20368@lge.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull x86 spinlock changes from Ingo Molnar:
 "The biggest change here are paravirtualized ticket spinlocks (PV
  spinlocks), which bring a nice speedup on various benchmarks.

  The KVM host side will come to you via the KVM tree"

* 'x86-spinlocks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kvm/guest: Fix sparse warning: "symbol 'klock_waiting' was not declared as static"
  kvm: Paravirtual ticketlocks support for linux guests running on KVM hypervisor
  kvm guest: Add configuration support to enable debug information for KVM Guests
  kvm uapi: Add KICK_CPU and PV_UNHALT definition to uapi
  xen, pvticketlock: Allow interrupts to be enabled while blocking
  x86, ticketlock: Add slowpath logic
  jump_label: Split jumplabel ratelimit
  x86, pvticketlock: When paravirtualizing ticket locks, increment by 2
  x86, pvticketlock: Use callee-save for lock_spinning
  xen, pvticketlocks: Add xen_nopvspin parameter to disable xen pv ticketlocks
  xen, pvticketlock: Xen implementation for PV ticket locks
  xen: Defer spinlock setup until boot CPU setup
  x86, ticketlock: Collapse a layer of functions
  x86, ticketlock: Don't inline _spin_unlock when using paravirt spinlocks
  x86, spinlock: Replace pv spinlocks with pv ticketlocks

Pull x86 SMAP fixes from Ingo Molnar:
 "Fixes for Intel SMAP support, to fix SIGSEGVs during bootup"

* 'x86-smap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Introduce [compat_]save_altstack_ex() to unbreak x86 SMAP
  x86, smap: Handle csum_partial_copy_*_user()

Pull x86 RAS changes from Ingo Molnar:
 "[ The reason for drivers/ updates is that Boris asked for the
    drivers/edac/ changes to go via x86/ras in this cycle ]

  Main changes:

   - AMD CPUs:
      . Add ECC event decoding support for new F15h models
      . Various erratum fixes
      . Fix single-channel on dual-channel-controllers bug.

   - Intel CPUs:
      . UC uncorrectable memory error parsing fix
      . Add support for CMC (Corrected Machine Check) 'FF' (Firmware
        First) flag in the APEI HEST

   - Various cleanups and fixes"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  amd64_edac: Fix incorrect wraparounds
  amd64_edac: Correct erratum 505 range
  cpc925_edac: Use proper array termination
  x86/mce, acpi/apei: Only disable banks listed in HEST if mce is configured
  amd64_edac: Get rid of boot_cpu_data accesses
  amd64_edac: Add ECC decoding support for newer F15h models
  x86, amd_nb: Clarify F15h, model 30h GART and L3 support
  pci_ids: Add PCI device ID functions 3 and 4 for newer F15h models.
  x38_edac: Make a local function static
  i3200_edac: Make a local function static
  x86/mce: Pay no attention to 'F' bit in MCACOD when parsing 'UC' errors
  APEI/ERST: Fix error message formatting
  amd64_edac: Fix single-channel setups
  EDAC: Replace strict_strtol() with kstrtol()
  mce: acpi/apei: Soft-offline a page on firmware GHES notification
  mce: acpi/apei: Add a boot option to disable ff mode for corrected errors
  mce: acpi/apei: Honour Firmware First for MCA banks listed in APEI HEST CMC

Pull x86 platform documentation fix from Ingo Molnar.

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/acpi: Correct out-of-date comment of __acpi_map_table()

Pull x86 paravirt changes from Ingo Molnar:
 "Hypervisor signature detection cleanup and fixes - the goal is to make
  KVM guests run better on MS/Hyperv and to generalize and factor out
  the code a bit"

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Correctly detect hypervisor
  x86, kvm: Switch to use hypervisor_cpuid_base()
  xen: Switch to use hypervisor_cpuid_base()
  x86: Introduce hypervisor_cpuid_base()

Pull x86 mm changes from Ingo Molnar:
 "Misc smaller fixes:

   - a parse_setup_data() boot crash fix

   - a memblock and an __early_ioremap cleanup

   - turn the always-on CONFIG_ARCH_MEMORY_PROBE=y into a configurable
     option and turn it off - it's an unrobust debug facility, it
     shouldn't be enabled by default"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: avoid remapping data in parse_setup_data()
  x86: Use memblock_set_current_limit() to set limit for memblock.
  mm: Remove unused variable idx0 in __early_ioremap()
  mm/hotplug, x86: Disable ARCH_MEMORY_PROBE by default

Pull x86 relocation changes from Ingo Molnar:
 "This tree contains a single change, ELF relocation handling in C - one
  of the kernel randomization patches that makes sense even without
  randomization present upstream"

* 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, relocs: Move ELF relocation handling to C

Pull timers/nohz changes from Ingo Molnar:
 "It mostly contains fixes and full dynticks off-case optimizations, by
  Frederic Weisbecker"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  nohz: Include local CPU in full dynticks global kick
  nohz: Optimize full dynticks's sched hooks with static keys
  nohz: Optimize full dynticks state checks with static keys
  nohz: Rename a few state variables
  vtime: Always debug check snapshot source _before_ updating it
  vtime: Always scale generic vtime accounting results
  vtime: Optimize full dynticks accounting off case with static keys
  vtime: Describe overriden functions in dedicated arch headers
  m68k: hardirq_count() only need preempt_mask.h
  hardirq: Split preempt count mask definitions
  context_tracking: Split low level state headers
  vtime: Fix racy cputime delta update
  vtime: Remove a few unneeded generic vtime state checks
  context_tracking: User/kernel broundary cross trace events
  context_tracking: Optimize context switch off case with static keys
  context_tracking: Optimize guest APIs off case with static key
  context_tracking: Optimize main APIs off case with static key
  context_tracking: Ground setup for static key use
  context_tracking: Remove full dynticks' hacky dependency on wide context tracking
  nohz: Only enable context tracking on full dynticks CPUs
  ...

Pull x86 fb changes from Ingo Molnar:
 "This tree includes preparatory patches for SimpleDRM driver support,
  by David Herrmann.  They clean up x86 framebuffer support by creating
  simplefb devices wherever possible.  More background can be found at

     http://lwn.net/Articles/558104/"

* 'x86-fb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fbdev: fbcon: select VT_HW_CONSOLE_BINDING
  fbdev: efifb: bind to efi-framebuffer
  fbdev: vesafb: bind to platform-framebuffer device
  fbdev: simplefb: add common x86 RGB formats
  x86: sysfb: move EFI quirks from efifb to sysfb
  x86: provide platform-devices for boot-framebuffers
  fbdev: simplefb: mark as fw and allocate apertures
  fbdev: simplefb: add init through platform_data

Pull x86 cpu feature fixes from Ingo Molnar:
 "Two small cpufeature support updates"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix override new_cpu_data.x86 with 486
  x86, cpufeature: Use new CC_HAVE_ASM_GOTO

Merge branches 'x86-boot-for-linus' and 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull tiny x86 boot cleanups from Ingo Molnar.

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Fix a sanity check in printf.c

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Fix warning due to undeclared strlen()

Pull x86/asmlinkage changes from Ingo Molnar:
 "As a preparation for Andi Kleen's LTO patchset (link time
  optimizations using GCC's -flto which build time optimization has
  steadily increased in quality over the past few years and might
  eventually be usable for the kernel too) this tree includes a handful
  of preparatory patches that make function calling convention
  annotations consistent again:

   - Mark every function without arguments (or 64bit only) that is used
     by assembly code with asmlinkage()

   - Mark every function with parameters or variables that is used by
     assembly code as __visible.

  For the vanilla kernel this has documentation, consistency and
  debuggability advantages, for the time being"

* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asmlinkage: Fix warning in xen asmlinkage change
  x86, asmlinkage, vdso: Mark vdso variables __visible
  x86, asmlinkage, power: Make various symbols used by the suspend asm code visible
  x86, asmlinkage: Make dump_stack visible
  x86, asmlinkage: Make 64bit checksum functions visible
  x86, asmlinkage, paravirt: Add __visible/asmlinkage to xen paravirt ops
  x86, asmlinkage, apm: Make APM data structure used from assembler visible
  x86, asmlinkage: Make syscall tables visible
  x86, asmlinkage: Make several variables used from assembler/linker script visible
  x86, asmlinkage: Make kprobes code visible and fix assembler code
  x86, asmlinkage: Make various syscalls asmlinkage
  x86, asmlinkage: Make 32bit/64bit __switch_to visible
  x86, asmlinkage: Make _*_start_kernel visible
  x86, asmlinkage: Make all interrupt handlers asmlinkage / __visible
  x86, asmlinkage: Change dotraplinkage into __visible on 32bit
  x86: Fix sys_call_table type in asm/syscall.h

Pull x86/asm changes from Ingo Molnar:
 "Main changes:

   - Apply low level mutex optimization on x86-64, by Wedson Almeida
     Filho.

   - Change bitops to be naturally 'long', by H Peter Anvin.

   - Add TSX-NI opcodes support to the x86 (instrumentation) decoder, by
     Masami Hiramatsu.

   - Add clang compatibility adjustments/workarounds, by Jan-Simon
     Möller"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, doc: Update uaccess.h comment to reflect clang changes
  x86, asm: Fix a compilation issue with clang
  x86, asm: Extend definitions of _ASM_* with a raw format
  x86, insn: Add new opcodes as of June, 2013
  x86/ia32/asm: Remove unused argument in macro
  x86, bitops: Change bitops to be native operand size
  x86: Use asm-goto to implement mutex fast path on x86-64

Pull x86/apic changes from Ingo Molnar:
 "Smaller fixes"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioapic: Check attr against the previous setting when programmed more than once
  x86/ioapic/kcrash: Prevent crash_kexec() from deadlocking on ioapic_lock
  x86/acpi: Fix incorrect sanity check in acpi_register_lapic()

Pull timer changes from Ingo Molnar:
 "Various clocksource driver updates: extend the core with memory mapped
  hardware (mmio) support and add new (ARM) Moxart SoC and sun4i
  hardware support"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  clocksource: arch_timer: Add support for memory mapped timers
  clocksource: arch_timer: Push the read/write wrappers deeper
  Documentation: Add memory mapped ARM architected timer binding
  clocksource: arch_timer: Pass clock event to set_mode callback
  clocksource: arch_timer: Make register accessors less error-prone
  ARM: clocksource: moxart: documentation: Update device tree bindings document
  ARM: clocksource: moxart: Add bitops.h include
  ARM: clocksource: moxart: documentation: Fix device tree bindings document
  ARM: clocksource: Add support for MOXA ART SoCs
  clocksource: cadence_ttc: Reuse clocksource as sched_clock
  clocksource: cadence_ttc: Remove unused header
  clocksource: sun4i: Fix bug when switching from periodic to oneshot modes
  clocksource: sun4i: Cleanup parent clock setup
  clocksource: sun4i: Remove TIMER_SCAL variable
  clocksource: sun4i: Factor out some timer code
  clocksource: sun4i: Fix the next event code
  clocksource: sun4i: Don't forget to enable the clock we use
  clocksource: sun4i: Add clocksource and sched clock drivers
  clocksource: sun4i: rename AUTORELOAD define to RELOAD
  clocksource: sun4i: Wrap macros arguments in parenthesis
  ...

Pull scheduler changes from Ingo Molnar:
 "Various optimizations, cleanups and smaller fixes - no major changes
  in scheduler behavior"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix the sd_parent_degenerate() code
  sched/fair: Rework and comment the group_imb code
  sched/fair: Optimize find_busiest_queue()
  sched/fair: Make group power more consistent
  sched/fair: Remove duplicate load_per_task computations
  sched/fair: Shrink sg_lb_stats and play memset games
  sched: Clean-up struct sd_lb_stat
  sched: Factor out code to should_we_balance()
  sched: Remove one division operation in find_busiest_queue()
  sched/cputime: Use this_cpu_add() in task_group_account_field()
  cpumask: Fix cpumask leak in partition_sched_domains()
  sched/x86: Optimize switch_mm() for multi-threaded workloads
  generic-ipi: Kill unnecessary variable - csd_flags
  numa: Mark __node_set() as __always_inline
  sched/fair: Cleanup: remove duplicate variable declaration
  sched/__wake_up_sync_key(): Fix nr_exclusive tasks which lead to WF_SYNC clearing

Merge branches 'perf-urgent-for-linus' and 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf changes from Ingo Molnar:
 "As a first remark I'd like to point out that the obsolete '-f'
  (--force) option, which has not done anything for several releases,
  has been removed from 'perf record' and related utilities.  Everyone
  please update muscle memory accordingly! :-)

  Main changes on the perf kernel side:

   - Performance optimizations:
        . for trace events, by Steve Rostedt.
        . for time values, by Peter Zijlstra

   - New hardware support:
        . for Intel Silvermont (22nm Atom) CPUs, by Zheng Yan
        . for Intel SNB-EP uncore PMUs, by Zheng Yan

   - Enhanced hardware support:
        . for Intel uncore PMUs: add filter support for QPI boxes, by Zheng Yan

   - Core perf events code enhancements and fixes:
        . for full-nohz feature handling, by Frederic Weisbecker
        . for group events, by Jiri Olsa
        . for call chains, by Frederic Weisbecker
        . for event stream parsing, by Adrian Hunter

   - New ABI details:
        . Add attr->mmap2 attribute, by Stephane Eranian
        . Add PERF_EVENT_IOC_ID ioctl to return event ID, by Jiri Olsa
        . Export u64 time_zero on the mmap header page to allow TSC
          calculation, by Adrian Hunter
        . Add dummy software event, by Adrian Hunter.
        . Add a new PERF_SAMPLE_IDENTIFIER to make samples always
          parseable, by Adrian Hunter.
        . Make Power7 events available via sysfs, by Runzhen Wang.

   - Code cleanups and refactorings:
        . for nohz-full, by Frederic Weisbecker
        . for group events, by Jiri Olsa

   - Documentation updates:
        . for perf_event_type, by Peter Zijlstra

  Main changes on the perf tooling side (some of these tooling changes
  utilize the above kernel side changes):

   - Lots of 'perf trace' enhancements:

        . Make 'perf trace' command line arguments consistent with
          'perf record', by David Ahern.

        . Allow specifying syscalls a la strace, by Arnaldo Carvalho de Melo.

        . Add --verbose and -o/--output options, by Arnaldo Carvalho de Melo.

        . Support ! in -e expressions, to filter a list of syscalls,
          by Arnaldo Carvalho de Melo.

        . Arg formatting improvements to allow masking arguments in
          syscalls such as futex and open, where the some arguments are
          ignored and thus should not be printed depending on other args,
          by Arnaldo Carvalho de Melo.

        . Beautify futex open, openat, open_by_handle_at, lseek and futex
          syscalls, by Arnaldo Carvalho de Melo.

        . Add option to analyze events in a file versus live, so that
          one can do:

           [root@zoo ~]# perf record -a -e raw_syscalls:* sleep 1
           [ perf record: Woken up 0 times to write data ]
           [ perf record: Captured and wrote 25.150 MB perf.data (~1098836 samples) ]
           [root@zoo ~]# perf trace -i perf.data -e futex --duration 1
              17.799 ( 1.020 ms): 7127 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, ua
             113.344 (95.429 ms): 7127 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, uaddr2: 0x7fff3f6c6648, val3: 4294967
             133.778 ( 1.042 ms): 18004 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, uaddr2: 0x7fff3f6c6648, val3: 429496
           [root@zoo ~]#

          By David Ahern.

        . Honor target pid / tid options when analyzing a file, by David Ahern.

        . Introduce better formatting of syscall arguments, including so
          far beautifiers for mmap, madvise, syscall return values,
          by Arnaldo Carvalho de Melo.

        . Handle HUGEPAGE defines in the mmap beautifier, by David Ahern.

   - 'perf report/top' enhancements:

        . Do annotation using /proc/kcore and /proc/kallsyms when
          available, removing the forced need for a vmlinux file kernel
          assembly annotation. This also improves this use case because
          vmlinux has just the initial kernel image, not what is actually
          in use after various code patchings by things like alternatives.
          By Adrian Hunter.

        . Add --ignore-callees=<regex> option to collapse undesired parts
          of call graphs, by Greg Price.

        . Simplify symbol filtering by doing it at machine class level,
          by Adrian Hunter.

        . Add support for callchains in the gtk UI, by Namhyung Kim.

        . Add --objdump option to 'perf top', by Sukadev Bhattiprolu.

   - 'perf kvm' enhancements:

        . Add option to print only events that exceed a specified time
          duration, by David Ahern.

        . Improve stack trace printing, by David Ahern.

        . Update documentation of the live command, by David Ahern

        . Add perf kvm stat live mode that combines aspects of 'perf kvm
          stat' record and report, by David Ahern.

        . Add option to analyze specific VM in perf kvm stat report, by
          David Ahern.

        . Do not require /lib/modules/* on a guest, by Jason Wessel.

   - 'perf script' enhancements:

        . Fix symbol offset computation for some dsos, by David Ahern.

        . Fix named threads support, by David Ahern.

        . Don't install scripting files files when perl/python support
          is disabled, by Arnaldo Carvalho de Melo.

   - 'perf test' enhancements:

        . Add various improvements and fixes to the "vmlinux matches
          kallsyms" 'perf test' entry, related to the /proc/kcore
          annotation feature. By Adrian Hunter.

        . Add sample parsing test, by Adrian Hunter.

        . Add test for reading object code, by Adrian Hunter.

        . Add attr record group sampling test, by Jiri Olsa.

        . Misc testing infrastructure improvements and other details,
          by Jiri Olsa.

   - 'perf list' enhancements:

        . Skip unsupported hardware events, by Namhyung Kim.

        . List pmu events, by Andi Kleen.

   - 'perf diff' enhancements:

        . Add support for more than two files comparison, by Jiri Olsa.

   - 'perf sched' enhancements:

        . Various improvements, including removing reliance on some
          scheduler tracepoints that provide the same information as the
          PERF_RECORD_{FORK,EXIT} events. By David Ahern.

        . Remove odd build stall by moving a large struct initialization
          from a local variable to a global one, by Namhyung Kim.

   - 'perf stat' enhancements:

        . Add --initial-delay option to skip measuring for a defined
          startup phase, by Andi Kleen.

   - Generic perf tooling infrastructure/plumbing changes:

        . Tidy up sample parsing validation, by Adrian Hunter.

        . Fix up jobserver setup in libtraceevent Makefile.
          by Arnaldo Carvalho de Melo.

        . Debug improvements, by Adrian Hunter.

        . Fix correlation of samples coming after PERF_RECORD_EXIT event,
          by David Ahern.

        . Improve robustness of the topology parsing code,
          by Stephane Eranian.

        . Add group leader sampling, that allows just one event in a group
          to sample while the other events have just its values read,
          by Jiri Olsa.

        . Add support for a new modifier "D", which requests that the
          event, or group of events, be pinned to the PMU.
          By Michael Ellerman.

        . Support callchain sorting based on addresses, by Andi Kleen

        . Prep work for multi perf data file storage, by Jiri Olsa.

        . libtraceevent cleanups, by Namhyung Kim.

  And lots and lots of other fixes and code reorganizations that did not
  make it into the list, see the shortlog, diffstat and the Git log for
  details!"

[ Also merge a leftover from the 3.11 cycle ]

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Prevent race in unthrottling code

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (237 commits)
  perf trace: Tell arg formatters the arg index
  perf trace: Add beautifier for open's flags arg
  perf trace: Add beautifier for lseek's whence arg
  perf tools: Fix symbol offset computation for some dsos
  perf list: Skip unsupported events
  perf tests: Add 'keep tracking' test
  perf tools: Add support for PERF_COUNT_SW_DUMMY
  perf: Add a dummy software event to keep tracking
  perf trace: Add beautifier for futex 'operation' parm
  perf trace: Allow syscall arg formatters to mask args
  perf: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node()
  perf: Export struct perf_branch_entry to userspace
  perf: Add attr->mmap2 attribute to an event
  perf/x86: Add Silvermont (22nm Atom) support
  perf/x86: use INTEL_UEVENT_EXTRA_REG to define MSR_OFFCORE_RSP_X
  perf trace: Handle missing HUGEPAGE defines
  perf trace: Honor target pid / tid options when analyzing a file
  perf trace: Add option to analyze events in a file versus live
  perf evlist: Add tracepoint lookup by name
  perf tests: Add a sample parsing test
  ...

Pull core/locking changes from Ingo Molnar:
 "Main changes:

   - another mutex optimization, from Davidlohr Bueso

   - improved lglock lockdep tracking, from Michel Lespinasse

   - [ assorted smaller updates, improvements, cleanups. ]"

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  generic-ipi/locking: Fix misleading smp_call_function_any() description
  hung_task debugging: Print more info when reporting the problem
  mutex: Avoid label warning when !CONFIG_MUTEX_SPIN_ON_OWNER
  mutex: Do not unnecessarily deal with waiters
  mutex: Fix/document access-once assumption in mutex_can_spin_on_owner()
  lglock: Update lockdep annotations to report recursive local locks
  lockdep: Introduce lock_acquire_exclusive()/shared() helper macros

Pull RCU updates from Ingo Molnar:
 "Main RCU changes this cycle were:

   - Full-system idle detection.  This is for use by Frederic
     Weisbecker's adaptive-ticks mechanism.  Its purpose is to allow the
     timekeeping CPU to shut off its tick when all other CPUs are idle.

   - Miscellaneous fixes.

   - Improved rcutorture test coverage.

   - Updated RCU documentation"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  nohz_full: Force RCU's grace-period kthreads onto timekeeping CPU
  nohz_full: Add full-system-idle state machine
  jiffies: Avoid undefined behavior from signed overflow
  rcu: Simplify _rcu_barrier() processing
  rcu: Make rcutorture emit online failures if verbose
  rcu: Remove unused variable from rcu_torture_writer()
  rcu: Sort rcutorture module parameters
  rcu: Increase rcutorture test coverage
  rcu: Add duplicate-callback tests to rcutorture
  doc: Fix memory-barrier control-dependency example
  rcu: Update RTFP documentation
  nohz_full: Add full-system-idle arguments to API
  nohz_full: Add full-system idle states and variables
  nohz_full: Add per-CPU idle-state tracking
  nohz_full: Add rcu_dyntick data for scalable detection of all-idle state
  nohz_full: Add Kconfig parameter for scalable detection of all-idle state
  nohz_full: Add testing information to documentation
  rcu: Eliminate unused APIs intended for adaptive ticks
  rcu: Select IRQ_WORK from TREE_PREEMPT_RCU
  rculist: list_first_or_null_rcu() should use list_entry_rcu()
  ...

Pull pwm changes from Thierry Reding:
 "A set of patches makes the device tree documentation for the various
  PWM drivers more consistent.  Device tree support is added to the
  Renesas TPU driver.  The sysfs interface now makes use of dev_groups.
  Other than that there is a healthy assortment of fixes and
  enhancements for minor issues that have shown up"

* tag 'for-3.12-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: pxa: Use module_platform_driver
  pwm: tiehrpwm: add missing __iomem annotation
  pwm: tiecap: add CONFIG_PM_SLEEP to ecap_pwm_{save,restore}_context()
  pwm: simplify use of devm_ioremap_resource
  pwm: renesas-tpu: Add DT support
  ARM: dts: Use the PWM polarity flags
  pwm: Update DT bindings to reference pwm.txt for cells documentation
  pwm: Use the DT macro directly when parsing PWM DT flags
  pwm: Add PWM polarity flag macro for DT
  pwm: mxs: Check the return value from stmp_reset_block()
  pwm: convert class code to use dev_groups

Pull pstore changes from Tony Luck:
 "A big part of this is the addition of compression to the generic
  pstore layer so that all backends can use the pitiful amounts of
  storage they control more effectively.  Three other small
  fixes/cleanups too.

* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore/ram: (really) fix undefined usage of rounddown_pow_of_two
  pstore/ram: Read and write to the 'compressed' flag of pstore
  efi-pstore: Read and write to the 'compressed' flag of pstore
  erst: Read and write to the 'compressed' flag of pstore
  powerpc/pseries: Read and write to the 'compressed' flag of pstore
  pstore: Add file extension to pstore file if compressed
  pstore: Add decompression support to pstore
  pstore: Introduce new argument 'compressed' in the read callback
  pstore: Add compression support to pstore
  pstore/Kconfig: Select ZLIB_DEFLATE and ZLIB_INFLATE when PSTORE is selected
  pstore: Add new argument 'compressed' in pstore write callback
  powerpc/pseries: Remove (de)compression in nvram with pstore enabled
  pstore: d_alloc_name() doesn't return an ERR_PTR
  acpi/apei/erst: Add missing iounmap() on error in erst_exec_move_data()

Pull cgroup updates from Tejun Heo:
 "A lot of activities on the cgroup front.  Most changes aren't visible
  to userland at all at this point and are laying foundation for the
  planned unified hierarchy.

   - The biggest change is decoupling the lifetime management of css
     (cgroup_subsys_state) from that of cgroup's.  Because controllers
     (cpu, memory, block and so on) will need to be dynamically enabled
     and disabled, css which is the association point between a cgroup
     and a controller may come and go dynamically across the lifetime of
     a cgroup.  Till now, css's were created when the associated cgroup
     was created and stayed till the cgroup got destroyed.

     Assumptions around this tight coupling permeated through cgroup
     core and controllers.  These assumptions are gradually removed,
     which consists bulk of patches, and css destruction path is
     completely decoupled from cgroup destruction path.  Note that
     decoupling of creation path is relatively easy on top of these
     changes and the patchset is pending for the next window.

   - cgroup has its own event mechanism cgroup.event_control, which is
     only used by memcg.  It is overly complex trying to achieve high
     flexibility whose benefits seem dubious at best.  Going forward,
     new events will simply generate file modified event and the
     existing mechanism is being made specific to memcg.  This pull
     request contains prepatory patches for such change.

   - Various fixes and cleanups"

Fixed up conflict in kernel/cgroup.c as per Tejun.

* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (69 commits)
  cgroup: fix cgroup_css() invocation in css_from_id()
  cgroup: make cgroup_write_event_control() use css_from_dir() instead of __d_cgrp()
  cgroup: make cgroup_event hold onto cgroup_subsys_state instead of cgroup
  cgroup: implement CFTYPE_NO_PREFIX
  cgroup: make cgroup_css() take cgroup_subsys * instead and allow NULL subsys
  cgroup: rename cgroup_css_from_dir() to css_from_dir() and update its syntax
  cgroup: fix cgroup_write_event_control()
  cgroup: fix subsystem file accesses on the root cgroup
  cgroup: change cgroup_from_id() to css_from_id()
  cgroup: use css_get() in cgroup_create() to check CSS_ROOT
  cpuset: remove an unncessary forward declaration
  cgroup: RCU protect each cgroup_subsys_state release
  cgroup: move subsys file removal to kill_css()
  cgroup: factor out kill_css()
  cgroup: decouple cgroup_subsys_state destruction from cgroup destruction
  cgroup: replace cgroup->css_kill_cnt with ->nr_css
  cgroup: bounce cgroup_subsys_state ref kill confirmation to a work item
  cgroup: move cgroup->subsys[] assignment to online_css()
  cgroup: reorganize css init / exit paths
  cgroup: add __rcu modifier to cgroup->subsys[]
  ...

Pull libata changes from Tejun Heo:
 "Two interesting changes.

   - libata acpi handling has been restructured so that the association
     between ata devices and ACPI handles are less convoluted.  This
     change shouldn't change visible behavior.

   - Queued TRIM support, which enables sending TRIM to the device
     without draining in-flight RW commands, is added.  Currently only
     enabled for ahci (and likely to stay that way for the foreseeable
     future).

  Other changes are driver-specific updates / fixes"

* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: bugfix: Remove __le32 in ata_tf_to_fis()
  libata: acpi: Remove ata_dev_acpi_handle stub in libata.h
  libata: Add support for queued DSM TRIM
  libata: Add support for SEND/RECEIVE FPDMA QUEUED
  libata: Add H2D FIS "auxiliary" port flag
  libata: Populate host-to-device FIS "auxiliary" field
  ata: acpi: rework the ata acpi bind support
  sata, highbank: send extra clock cycles in SGPIO patterns
  sata, highbank: set tx_atten override bits
  devicetree: create a separate binding description for sata_highbank
  drivers/ata/sata_rcar.c: simplify use of devm_ioremap_resource
  sata highbank: enable 64-bit DMA mask when using LPAE
  ata: pata_samsung_cf: add missing __iomem annotation
  ata: pata_arasan: Staticize local symbols
  sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
  ata: use dev_get_platdata()
  sata_mv: Remove unneeded forward declaration
  libata: acpi: remove dead code for ata_acpi_(un)bind
  libata: move 'struct ata_taskfile' and friends from ata.h to libata.h

Pull workqueue updates from Tejun Heo:
 "Nothing interesting.  All are doc / comment updates"

* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Correct/Drop references to gcwq in Documentation
  workqueue: Fix manage_workers() RETURNS description
  workqueue: Comment correction in file header
  workqueue: mark WQ_NON_REENTRANT deprecated

Pull single percpu update from Tejun Heo:
 "Just a single patch to update type verification macro for percpu
  accessors.

  Christoph is trying to replace __get_cpu_var() with this_cpu accessors
  which needs this update.  There are still some issues to be resolved
  but eventually the conversion patches are likely to be routed through
  different trees, so I think it'd be convenient to merge this commit
  early"

* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: Make __verify_pcu_ptr handle per cpu pointers to arrays

Pull PCI changes from Bjorn Helgaas:

  PCI device hotplug:
    - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
    - Assign resources on per-host bridge basis (Yinghai Lu)

  MPS (Max Payload Size):
    - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
    - Add warnings about unsafe MPS settings (Yijing Wang)
    - Simplify interface and messages (Bjorn Helgaas)

  SR-IOV:
    - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
    - Update NumVFs register when disabling SR-IOV (Yijing Wang)

  Virtualization:
    - Add bus and slot reset support (Alex Williamson)
    - Fix ACS (Access Control Services) issues (Alex Williamson)

  Miscellaneous:
    - Simplify PCIe Capability accessors (Bjorn Helgaas)
    - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
    - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
    - Delay enabling bridges until they're needed (Yinghai Lu)
    - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
    - Convert class code to use dev_groups (Greg Kroah-Hartman)
    - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
    - Fix bridge I/O window alignment (Bjorn Helgaas)
    - Add pci_wait_for_pending_transaction() (Casey Leedom)
    - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)

* tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
  PCI: exynos: Add I/O access wrappers
  PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
  PCI: Remove pcie_cap_has_devctl()
  PCI: Support PCIe Capability Slot registers only for ports with slots
  PCI: Remove PCIe Capability version checks
  PCI: Allow PCIe Capability link-related register access for switches
  PCI: Add offsets of PCIe capability registers
  PCI: Tidy bitmasks and spacing of PCIe capability definitions
  PCI: Remove obsolete comment reference to pci_pcie_cap2()
  PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
  PCI: Rename PCIe capability definitions to follow convention
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Disable decoding for BAR sizing only when it was actually enabled
  PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
  PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  ...

Pull ACPI and power management updates from Rafael Wysocki:

 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
    of Intel Thunderbolt support on systems that use ACPI for signalling
    Thunderbolt hotplug events.  This also should make ACPIPHP work in
    some cases in which it was known to have problems.  From
    Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.

 2) ACPI core code cleanups and dock station support cleanups from
    Jiang Liu and Rafael J Wysocki.

 3) Fixes for locking problems related to ACPI device hotplug from
    Rafael J Wysocki.

 4) ACPICA update to version 20130725 includig fixes, cleanups, support
    for more than 256 GPEs per GPE block and a change to make the ACPI
    PM Timer optional (we've seen systems without the PM Timer in the
    field already).  One of the fixes, related to the DeRefOf operator,
    is necessary to prevent some Windows 8 oriented AML from causing
    problems to happen.  From Bob Moore, Lv Zheng, and Jung-uk Kim.

 5) Removal of the old and long deprecated /proc/acpi/event interface
    and related driver changes from Thomas Renninger.

 6) ACPI and Xen changes to make the reduced hardware sleep work with
    the latter from Ben Guthro.

 7) ACPI video driver cleanups and a blacklist of systems that should
    not tell the BIOS that they are compatible with Windows 8 (or ACPI
    backlight and possibly other things will not work on them).  From
    Felipe Contreras.

 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
    Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
    Toshi Kani, and Wei Yongjun.

 9) cpufreq ondemand governor target frequency selection change to
    reduce oscillations between min and max frequencies (essentially,
    it causes the governor to choose target frequencies proportional
    to load) from Stratos Karafotis.

10) cpufreq fixes allowing sysfs attributes file permissions to be
    preserved over suspend/resume cycles Srivatsa S Bhat.

11) Removal of Device Tree parsing for CPU device nodes from multiple
    cpufreq drivers that required some changes related to
    of_get_cpu_node() to be made in a few architectures and in the
    driver core.  From Sudeep KarkadaNagesha.

12) cpufreq core fixes and cleanups related to mutual exclusion and
    driver module references from Viresh Kumar, Lukasz Majewski and
    Rafael J Wysocki.

13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
    Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
    Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
    Stratos Karafotis, and Viresh Kumar.

14) Fixes to prevent race conditions in coupled cpuidle from happening
    from Colin Cross.

15) cpuidle core fixes and cleanups from Daniel Lezcano and
    Tuukka Tikkanen.

16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
    Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
    and Sahara.

17) System sleep tracing changes from Todd E Brandt and Shuah Khan.

18) PNP subsystem conversion to using struct dev_pm_ops for power
    management from Shuah Khan.

* tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits)
  cpufreq: Don't use smp_processor_id() in preemptible context
  cpuidle: coupled: fix race condition between pokes and safe state
  cpuidle: coupled: abort idle if pokes are pending
  cpuidle: coupled: disable interrupts after entering safe state
  ACPI / hotplug: Remove containers synchronously
  driver core / ACPI: Avoid device hot remove locking issues
  cpufreq: governor: Fix typos in comments
  cpufreq: governors: Remove duplicate check of target freq in supported range
  cpufreq: Fix timer/workqueue corruption due to double queueing
  ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT
  ACPI / thermal: Add check of "_TZD" availability and evaluating result
  cpufreq: imx6q: Fix clock enable balance
  ACPI: blacklist win8 OSI for buggy laptops
  cpufreq: tegra: fix the wrong clock name
  cpuidle: Change struct menu_device field types
  cpuidle: Add a comment warning about possible overflow
  cpuidle: Fix variable domains in get_typical_interval()
  cpuidle: Fix menu_device->intervals type
  cpuidle: CodingStyle: Break up multiple assignments on single line
  cpuidle: Check called function parameter in get_typical_interval()
  ...

Pull SCSI target fixes from Nicholas Bellinger:
 "The first patch is to address a long standing issue where INQUIRY
  vendor + model response data was not correctly padded with ASCII
  spaces, causing MSFT and Falconstor multipath stacks to not function
  with our LUNs.

  The second -> forth patches are additional iscsi-target regression
  fixes for the post >= v3.10 iser-target changes.  The second and third
  are failure cases that have appeared during further testing, and the
  forth is only reproducible with malformed NOP packets.

  The fifth patch is a v3.11 specific regression caused by a recent
  optimization that showed up during WRITE I/O failure testing.

  I'll be sending Patch #1 and Patch #5 to Greg-KH separately for
  stable"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix se_cmd->state_list leak regression during WRITE failure
  iscsi-target: Fix potential NULL pointer in solicited NOPOUT reject
  iscsi-target: Fix iscsit_transport reference leak during NP thread reset
  iscsi-target: Fix ImmediateData=Yes failure regression in >= v3.10
  target: Fix trailing ASCII space usage in INQUIRY vendor+model

Pull first round of SCSI updates from James Bottomley:
 "This patch set is a set of driver updates (ufs, zfcp, lpfc, mpt2/3sas,
  qla4xxx, qla2xxx [adding support for ISP8044 + other things]).

  We also have a new driver: esas2r which has a number of static checker
  problems, but which I expect to resolve over the -rc course of 3.12
  under the new driver exception.

  We also have the error return that were discussed at LSF"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (118 commits)
  [SCSI] sg: push file descriptor list locking down to per-device locking
  [SCSI] sg: checking sdp->detached isn't protected when open
  [SCSI] sg: no need sg_open_exclusive_lock
  [SCSI] sg: use rwsem to solve race during exclusive open
  [SCSI] scsi_debug: fix logical block provisioning support when unmap_alignment != 0
  [SCSI] scsi_debug: fix endianness bug in sdebug_build_parts()
  [SCSI] qla2xxx: Update the driver version to 8.06.00.08-k.
  [SCSI] qla2xxx: print MAC via %pMR.
  [SCSI] qla2xxx: Correction to message ids.
  [SCSI] qla2xxx: Correctly print out/in mailbox registers.
  [SCSI] qla2xxx: Add a new interface to update versions.
  [SCSI] qla2xxx: Move queue depth ramp down message to i/o debug level.
  [SCSI] qla2xxx: Select link initialization option bits from current operating mode.
  [SCSI] qla2xxx: Add loopback IDC-TIME-EXTEND aen handling support.
  [SCSI] qla2xxx: Set default critical temperature value in cases when ISPFX00 firmware doesn't provide it
  [SCSI] qla2xxx: QLAFX00 make over temperature AEN handling informational, add log for normal temperature AEN
  [SCSI] qla2xxx: Correct Interrupt Register offset for ISPFX00
  [SCSI] qla2xxx: Remove handling of Shutdown Requested AEN from qlafx00_process_aen().
  [SCSI] qla2xxx: Send all AENs for ISPFx00 to above layers.
  [SCSI] qla2xxx: Add changes in initialization for ISPFX00 cards with BIOS
  ...

While we are likley to succeed and break out of this loop, it isn't
guaranteed.  We should be power and thread friendly if we do have to
go around for a second (or third, or more) attempt.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull tty/serial driver patches from Greg KH:
 "Here's the big tty/serial driver pull request for 3.12-rc1.

  Lots of n_tty reworks to resolve some very long-standing issues,
  removing the 3-4 different locks that were taken for every character.
  This code has been beaten on for a long time in linux-next with no
  reported regressions.

  Other than that, a range of serial and tty driver updates and
  revisions.  Full details in the shortlog"

* tag 'tty-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (226 commits)
  hvc_xen: Remove unnecessary __GFP_ZERO from kzalloc
  serial: imx: initialize the local variable
  tty: ar933x_uart: add device tree support and binding documentation
  tty: ar933x_uart: allow to build the driver as a module
  ARM: dts: msm: Update uartdm compatible strings
  devicetree: serial: Document msm_serial bindings
  serial: unify serial bindings into a single dir
  serial: fsl-imx-uart: Cleanup duplicate device tree binding
  tty: ar933x_uart: use config_enabled() macro to clean up ifdefs
  tty: ar933x_uart: remove superfluous assignment of ar933x_uart_driver.nr
  tty: ar933x_uart: use the clk API to get the uart clock
  tty: serial: cpm_uart: Adding proper request of GPIO used by cpm_uart driver
  serial: sirf: fix the amount of serial ports
  serial: sirf: define macro for some magic numbers of USP
  serial: icom: move array overflow checks earlier
  TTY: amiserial, remove unnecessary platform_set_drvdata()
  serial: st-asc: remove unnecessary platform_set_drvdata()
  msm_serial: Send more than 1 character on the console w/ UARTDM
  msm_serial: Add support for non-GSBI UARTDM devices
  msm_serial: Switch clock consumer strings and simplify code
  ...

Pull staging tree merge from Greg KH:
 "Here's the bit staging tree pull request for 3.12-rc1.

  Lots of staging driver updates, and fixes.  Lustre is finally enabled
  in the build, and lots of cleanup started happening in it.  There's a
  new wireless driver in here, and 2 new TTY drivers, which cause the
  overall lines added/removed to be quite large on the "added" side.

  The IIO driver updates are also coming through here, as they are tied
  to the staging iio drivers"

* tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (942 commits)
  staging: dwc2: make dwc2_core_params documentation more complete
  staging: dwc2: validate the value for phy_utmi_width
  staging: dwc2: interpret all hwcfg and related register at init time
  staging: dwc2: properly mask the GRXFSIZ register
  staging: dwc2: remove redundant register reads
  staging: dwc2: re-use hptxfsiz variable
  staging: dwc2: simplify debug output in dwc_hc_init
  staging: dwc2: add missing shift
  staging: dwc2: simplify register shift expressions
  staging: dwc2: only read the snpsid register once
  staging: dwc2: unshift non-bool register value constants
  staging: dwc2: fix off-by-one in check for max_packet_count parameter
  staging: dwc2: remove specific fifo size constants
  Staging:BCM:DDRInit.c:Renaming __FUNCTION__
  staging: bcm: remove Version.h file.
  staging: rtl8188eu: off by one in rtw_set_802_11_add_wep()
  staging: r8188eu: copying one byte too much
  staging: rtl8188eu: || vs && typo
  staging: r8188eu: off by one bugs
  staging: crystalhd: Resolve sparse 'different base types' warnings.
  ...

Merge tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg KH:
 "Here's the big driver core pull request for 3.12-rc1.

  Lots of tiny changes here fixing up the way sysfs attributes are
  created, to try to make drivers simpler, and fix a whole class race
  conditions with creations of device attributes after the device was
  announced to userspace.

  All the various pieces are acked by the different subsystem
  maintainers"

* tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits)
  firmware loader: fix pending_fw_head list corruption
  drivers/base/memory.c: introduce help macro to_memory_block
  dynamic debug: line queries failing due to uninitialized local variable
  sysfs: sysfs_create_groups returns a value.
  debugfs: provide debugfs_create_x64() when disabled
  rbd: convert bus code to use bus_groups
  firmware: dcdbas: use binary attribute groups
  sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled
  driver core: add #include <linux/sysfs.h> to core files.
  HID: convert bus code to use dev_groups
  Input: serio: convert bus code to use drv_groups
  Input: gameport: convert bus code to use drv_groups
  driver core: firmware: use __ATTR_RW()
  driver core: core: use DEVICE_ATTR_RO
  driver core: bus: use DRIVER_ATTR_WO()
  driver core: create write-only attribute macros for devices and drivers
  sysfs: create __ATTR_WO()
  driver-core: platform: convert bus code to use dev_groups
  workqueue: convert bus code to use dev_groups
  MEI: convert bus code to use dev_groups
  ...