- 22 Nov, 2021 1 commit
-
-
Umesh Nerlige Ramappa authored
When guc timestamp ping worker runs it takes the spinlock and calls with_intel_runtime_pm. Since with_intel_runtime_pm may sleep, move the spinlock inside __update_guc_busyness_stats. Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
- 19 Nov, 2021 6 commits
-
-
Maarten Lankhorst authored
Lets be thorough here. Users of the TTM backend would likely expect this behaviour. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
-
Maarten Lankhorst authored
It's just an alias to vma->obj->base.resv, no need to duplicate it. Signed-off-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by:
-
Maarten Lankhorst authored
vma->obj and vma->resv are now never NULL, and some checks can be removed. Signed-off-by:
-
Maarten Lankhorst authored
This allows us to finally get rid of all the assumptions that vma->obj is NULL. Changes since v1: - Ensure the mock_ring vma is pinned to prevent a fault. - Pin it high to avoid failure in evict_for_vma selftest. Signed-off-by:
-
Maarten Lankhorst authored
We currently have to special case vma->obj being NULL because of gen6 ppgtt and mock_engine. Fix gen6 ppgtt, so we may soon be able to remove a few checks. As the object only exists as a fake object pointing to ggtt, we have no backing storage, so no real object is created. It just has to look real enough. Also kill pin_mutex, it's not compatible with ww locking, and we can use the vm lock instead. v2: - Drop IS_SHRINKABLE and shorten overly long line v3: - Checkpatch fix for alignment Signed-off-by:
-
Matthew Auld authored
In intel_context_do_pin_ww, when calling into the pre_pin hook(which is passed the ww context) it could in theory return -EDEADLK(which is very likely with debug kernels), once we start adding more ww locking in there, like in the next patch. If so then we need to be mindful of having to restart the do_pin at this point. If this is the kernel_context, or some other early in-kernel context where we have yet to setup the default_state, then we always inhibit the context restore, and instead rely on the delayed active_release to set the CONTEXT_VALID_BIT for us(if we even care), which should indicate that we have context switched away, and that our newly saved context state should now be valid. However, since we currently grab the active reference before the potential ww dance, we can end up setting the CONTEXT_VALID_BIT much too early, if we need to backoff, and then upon re-trying the do_pin, we could potentially cause the hardware to incorrectly load some garbage context state when later context switching to that context, but at the very least this will trigger the GEM_BUG_ON() in __engine_unpark. For now let's just move any ww dance stuff prior to arming the active reference. For normal user contexts this shouldn't be a concern, since we should already have the default_state ready when initialising the lrc state, and so there should be no concern with active_release somehow prematurely setting the CONTEXT_VALID_BIT. v2(Thomas): - Also re-order the onion unwind Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117142024.1043017-1-matthew.auld@intel.com
-
- 16 Nov, 2021 2 commits
-
-
Dan Carpenter authored
The intel_engine_create_virtual() function does not return NULL. It returns error pointers. Fixes: e5e32171 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211116114916.GB11936@kili
-
Tvrtko Ursulin authored
Trying to capture uninitialised engines when we wedged on init ends in tears. Skip that together with uC capture, since failure to initialise the latter can actually be one of the reasons for wedging on init. v2: * Use i915_disable_error_state when wedging on init/fini. v3: * Handle mock tests. Signed-off-by:
-
- 15 Nov, 2021 1 commit
-
-
Matt Roper authored
Pre-HSW platforms don't use the gt SSEU structures; this means that calling intel_sseu_get_subslices() on slice 0 for these platforms will trip a GEM_BUG_ON(slice >= sseu->max_slices) warning. Let's move the DSS lookup for a DG2 workaround into a helper function that will only get called after we've already decided that we're on a DG2 platform. Fixes: 645cc0b9 ("drm/i915/dg2: Add initial gt/ctx/engine workarounds") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
- 12 Nov, 2021 1 commit
-
-
Vinay Belgaumkar authored
It's possible that i915 might get wedged between a boost and un-boost. Validate the i915-GuC connection before trying to send a H2G to change the min frequency. Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/4464 Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
- 11 Nov, 2021 6 commits
-
-
Matt Roper authored
The bspec's performance guide suggests programming specific values into a few registers for optimal performance. Although these aren't workarounds, it's easiest to handle them inside the GT workaround functions (which will also ensure that the values set here are properly melded with other bits in the same registers that _are_ set by workarounds). Bspec: 68331, 45395 Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Siddiqui Ayaz A <ayaz.siddiqui@intel.com> Signed-off-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211102222511.534310-4-matthew.d.roper@intel.com
-
Matt Roper authored
Bspec: 54077,68173,54833 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211102222511.534310-3-matthew.d.roper@intel.com
-
Stuart Summers authored
Add the initial set of workarounds for Xe_HP SDV. There are some additional workarounds specific to the compute engines that we're holding back for now. Those will be added later, after general compute engine support lands. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
-
Thomas Hellström authored
There's a small window of opportunity during which the adjust_lru() function can be called with a GEM refcount of zero from the TTM eviction code. This results in a kernel BUG(). Ensure that we don't attempt to modify the GEM shrinker lists unless we have a GEM refcount. Fixes: ebd4a8ec ("drm/i915/ttm: move shrinker management into adjust_lru") Signed-off-by:
-
Daniele Ceraolo Spurio authored
In coming patches we'll be doing the actual tile initialization between these two uncore init phases. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211029032817.3747750-3-matthew.d.roper@intel.com
-
Paulo Zanoni authored
We'll be adding multi-tile support soon; on multi-tile platforms interrupts are per-tile and every tile has the full set of interrupt registers. In this commit we start passing intel_gt instead of dev_priv for the functions that are related to Xe_HP irq handling. Right now we're still passing tile 0 everywhere, but in later patches we'll start actually passing the correct tile. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Co-authored-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
- 10 Nov, 2021 2 commits
-
-
Thomas Hellström authored
Some selftests assume that nothing will attempt to grab these bitlocks while they are held by the selftests. With GuC, for example, that is not true because the hanging workloads may cause the GuC code to attempt to grab them for a global reset, and that may cause it to end up sleeping on the bit never waking up. Regardless whether that will be the final solution for GuC, use clear_and_wake_up_bit() pending a more thorough investigation on how this should be handled moving forward. To be clear this needs to be a temporary solution. If we can't find an in-kernel locking primitive to use here, we should at the very least add lockdep annotation to these bitlocks with a thorough explanation as to why we need to use bits. v3: - Use GEM_BUG_ON(test_and_set_bit()) rather than set_bit() to verify the assumption that nothing is holding the reset locks when we attempt to grab them. (Chris Wilson) Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105150146.834052-1-thomas.hellstrom@linux.intel.com
-
Thomas Hellström authored
Gem-TTM objects that are backed by shmem might have populated page-vectors without having the GEM pages set. Those objects aren't moved to the correct shrinker / purge list by gem_madvise. For such objects, identified by having the _SELF_MANAGED_SHRINK_LIST set, make sure they end up on the correct list. v2: - Revert a change that made swapped-out objects inaccessible for truncating. (Matthew Auld) Signed-off-by:
-
- 09 Nov, 2021 2 commits
-
-
John Harrison authored
When i915 receives a context reset notification from GuC, it triggers an error capture before resetting any outstanding requsts of that context. Unfortunately, the error capture is not a time bound operation. In certain situations it can take a long time, particularly when multiple large LMEM buffers must be read back and eoncoded. If this delay is longer than other timeouts (heartbeat, test recovery, etc.) then a full GT reset can be triggered in the middle. That can result in the context being reset by GuC actually being destroyed before the error capture completes and the GuC submission code resumes. Thus, the GuC side can start dereferencing stale pointers and Bad Things ensue. So add a refcount get of the context during the entire reset operation. That way, the context can't be destroyed part way through no matter what other resets or user interactions occur. v2: (Matthew Brost) - Update patch to work with async error capture v3: (Matthew Brost) - Drop async capture support as that hasn't landed yet Signed-off-by:
-
Matthew Brost authored
Don't set, test for, or clear per-engine reset bits with GuC submission as the GuC owns the per engine resets not the i915. Setting, testing for, and clearing these bits is causing issues with the hangcheck selftest. Rather than change to test to not use these bits, rip the use of these bits out from the reset code. Signed-off-by:
-
- 05 Nov, 2021 4 commits
-
-
Maarten Lankhorst authored
In the next commit, we don't evict when refcount = 0, so we need to call drain freed objects, because we want to pin new bo's in the same place, causing a test failure. Furthermore, since each subtest is separated, it's a lot better to use i915_live_selftests, so each subtest starts with a clean slate, and a clean address space. v2(Reported-by: kernel test robot <lkp@intel.com>): - Make hugepage_ctx static. Signed-off-by:
-
Maarten Lankhorst authored
gen6_ppgtt_unpin_all is unused, kill it. Signed-off-by:
-
Thomas Hellström authored
If the initial fill blit or copy blit of an object fails, the old content of the data might be exposed and read as soon as either CPU- or GPU PTEs are set up to point at the pages. Intercept the blit fence with an async callback that checks the blit fence for errors and if there are errors performs an async cpu blit instead. If there is a failure to allocate the async dma_fence_work, allocate it on the stack and sync wait for the blit to complete. Add selftests that simulate gpu blit failures and failure to allocate the async dma_fence_work. A previous version of this pach used dma_fence_work, now that's opencoded which adds more code but might lower the latency somewhat in the common non-error case. v3: - Style fixes (Matthew Auld) v4: - Use "#if IS_ENABLED()" instead of #ifdef (Matthew Auld) v5: - Fix an issue where we, if the dependency was already signaled, might end up waiting for a memcpy fence that would never signal. v6: - Add a missing i915_ttm_memcpy_release() (Matthew Auld) Signed-off-by:
-
Thomas Hellström authored
We are about to introduce failsafe- and asynchronous migration and ttm moves. This will add complexity and code to the TTM move code so it makes sense to split it out to a separate file to make the i915 TTM code easer to digest. Split the i915 TTM move code out and since we will have to change the name of the gpu_binds_iomem() and cpu_maps_iomem() functions anyway, we alter the name of gpu_binds_iomem() to i915_ttm_gtt_binds_lmem() which is more reflecting what it is used for. With this we also add some more documentation. Otherwise there should be no functional change. Signed-off-by:
-
- 04 Nov, 2021 4 commits
-
-
Matthew Auld authored
dma_fence_wait expects a boolean for whether it should be interruptible, not a timeout value. Signed-off-by:
-
Vinay Belgaumkar authored
Add a helper to sort through the SLPC/RPS paths of get/set methods. Boost frequency will be modified as long as it is within the constraints of RP0 and if it is different from the existing one. We will set min freq to boost only if there is at least one active waiter. v2: Add num_boosts to guc_slpc_info and changes for worker function v3: Review comments (Ashutosh) Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
Vinay Belgaumkar authored
Add helper in RPS code for handling SLPC and non-SLPC paths. When boost is requested in the SLPC path, we can ask GuC to ramp up the frequency req by setting the minimum frequency to boost freq. Reset freq back to the min softlimit when there are no more waiters. v2: Schedule a worker thread which can boost freq from within an interrupt context as well. v3: No need to check against requested freq before scheduling boost work (Ashutosh) Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
Vinay Belgaumkar authored
Define helpers and struct members required to record boost info. Boost frequency is initialized to RP0 at SLPC init. Also define num_waiters which can track the pending boost requests. Boost will be done by scheduling a worker thread. This will avoid the need to make H2G calls inside an interrupt context. Initialize the worker function during SLPC init as well. Had to move intel_guc_slpc_init a few lines below to accommodate this. v2: Add a workqueue to handle waitboost v3: Code review comments (Ashutosh) Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
- 02 Nov, 2021 8 commits
-
-
José Roberto de Souza authored
As now graphics and media can have different steppings this patch is renaming all _GT_STEP macros to _GRAPHICS_STEP. Future platforms will properly choose between _MEDIA_STEP and _GRAPHICS_STEP for each new workaround. Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Caz Yokoyama <caz.yokoyama@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Graphics and media IPs can have different stepping so a new field is needed in intel_step_info. The next patch will take care of rename gt_step to graphics_step. Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Adding a structure to standardize access to IP versioning as future platforms will have this information populated at runtime. The constant platform display version is not using this new struct but the runtime variant will definitely use it. Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by:
-
Matthew Auld authored
We were overzealous here; even though discrete is non-LLC, it should still be always coherent. v2(Thomas & Daniel) - Be extra cautious and limit to DG1 - Add some more commentary Signed-off-by:
-
Matthew Auld authored
Should not be needed. Even with non-coherent display, we should be using device local-memory there, and not system memory. v2: also add a warning in i915_gem_clflush_object Signed-off-by:
-
Matthew Auld authored
Move it next to its partner in crime; gpu_write_needs_clflush. For better readability lets keep gpu vs cpu at least in the same file. Signed-off-by:
-
Matthew Auld authored
We seem to have an unfortunate issue where we arrive from: i915_gem_object_flush_if_display+0x86/0xd0 [i915] intel_user_framebuffer_dirty+0x1a/0x50 [i915] drm_mode_dirtyfb_ioctl+0xfb/0x1b0 which can be before the pages are populated(and pinned for display), and so i915_gem_object_has_struct_page() might still return true, as per the ttm backend. We could re-order the later get_pages() call here, but since on discrete everything should already be coherent, with the exception of the display engine, and even there display surfaces must be allocated in device local-memory anyway, so there should in theory be no conceivable reason to ever call i915_gem_clflush_object() on discrete. References: https://gitlab.freedesktop.org/drm/intel/-/issues/4320Signed-off-by: -
Matthew Auld authored
In theory if clflush_work_create() somehow fails here, and we don't yet have mm.pages populated then we end up resetting cache_dirty, which is likely wrong, since that will potentially skip the flush-on-acquire, if it was needed. It looks like intel_user_framebuffer_dirty() can arrive here before the pages are populated. v2(Thomas): - Move setting cache_dirty out of the async portion, also add a comment for why that should still be safe. v3: - Add Thomas' irc r-b Signed-off-by:
-
- 01 Nov, 2021 2 commits
-
-
Thomas Hellström authored
As we start to introduce asynchronous failsafe object migration, where we update the object state and then submit asynchronous commands we need to record what memory resources are actually used by various part of the command stream. Initially for three purposes: 1) Error capture. 2) Asynchronous migration error recovery. 3) Asynchronous vma bind. At the time where these happens, the object state may have been updated to be several migrations ahead and object sg-tables discarded. In order to make it possible to keep sg-tables with memory resource information for these operations, introduce refcounted sg-tables that aren't freed until the last user is done with them. The alternative would be to reference information sitting on the corresponding ttm_resources which typically have the same lifetime as these refcountes sg_tables, but that leads to other awkward constructs: Due to the design direction chosen for ttm resource managers that would lead to diamond-style inheritance, the LMEM resources may sometimes be prematurely freed, and finally the subclassed struct ttm_resource would have to bleed into the asynchronous vma bind code. v3: - Address a number of style issues (Matthew Auld) v4: - Dont check for st->sgl being NULL in i915_ttm_tt__shmem_unpopulate(), that should never happen. (Matthew Auld) v5: - Fix a Potential double-free (Matthew Auld) Signed-off-by:
-
Cooper Chiou authored
This implements WaProgramMgsrForCorrectSliceSpecificMmioReads which was omitted by mistake from Gen9 documentation, while it is actually applicable to fused off parts. Workaround consists of making sure MCR packet control register is programmed to point to enabled slice/subslice pair before doing any MMIO reads from the affected registers. Failure do to this can result in complete system hangs when running certain workloads. Two known cases which can cause system hangs are: 1. "test_basic progvar_prog_scope_uninit" test which is part of Khronos OpenCL conformance suite (https://github.com/KhronosGroup/OpenCL-CTS) with the Intel OpenCL driver (https://github.com/intel/compute-runtime). 2. VP8 media hardware encoding using the full-feature build of the Intel media-driver (https://github.com/intel/media-driver) and ffmpeg. For the former case patch was verified to fix the hard system hang when executing the OCL test on Intel Pentium CPU 6405U which contains fused off GT1 graphics. Reference: HSD#1508045018,1405586840, BSID#0575 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: William Tseng <william.tseng@intel.com> Cc: Shawn C Lee <shawn.c.lee@intel.com> Cc: Pawel Wilma <pawel.wilma@intel.com> Signed-off-by:Cooper Chiou <cooper.chiou@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
- 29 Oct, 2021 1 commit
-
-
Daniel Vetter authored
Gone with userptr rewrite by Maarten in ed29c269 ("drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7.") Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211022082200.2684194-1-daniel.vetter@ffwll.ch
-
