- 29 Apr, 2013 40 commits
-
-
Dmitry Monakhov authored
There are two convenient ways to report errors to userspace 1) retun error to original syscall for example write(2) 2) mark mapping with error flag and return it on later fsync(2) Second one is broken if (mapping->nrpages == 0) This is real-life situation because after error pages are likey to be truncated or invalidated. We have to return an error regardless to number of pages in the mapping. #Original testcase: git@github.com:dmonakhov/xfstests.git MOUNT_OPTIONS="-b1024" ./check shared/305 Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tang Chen authored
There is no comment for parameter nid of memblock_insert_region(). This patch adds comment for it. Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by:
-
Tang Chen authored
nr_pages is not used in pages_correctly_reserved(). So remove it. Signed-off-by:
Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by:
Wen Congyang <wency@cn.fujitsu.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Yasuaki Ishimatsu authored
When hot removing memory, a firmware_map_entry which has memory range of the memory is released by release_firmware_map_entry(). If the entry is allocated by bootmem, release_firmware_map_entry() adds the entry to map_entires_bootmem list when firmware_map_find_entry() finds the entry from map_entries list. But firmware_map_find_entry never find the entry sicne map_entires list does not have the entry. So the entry just leaks. Here are steps of leaking firmware_map_entry: firmware_map_remove() -> firmware_map_find_entry() Find released entry from map_entries list -> firmware_map_remove_entry() Delete the entry from map_entries list -> remove_sysfs_fw_map_entry() ... -> release_firmware_map_entry() -> firmware_map_find_entry() Find the entry from map_entries list but the entry has been deleted from map_entries list. So the entry is not added to map_entries_bootmem. Thus the entry leaks release_firmware_map_entry() should not call firmware_map_find_entry() since releaed entry has been deleted from map_entries list. So the patch delete firmware_map_find_entry() from releae_firmware_map_entry() Signed-off-by:Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by:
Toshi Kani <toshi.kani@hp.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by:
-
Shaohua Li authored
In page reclaim, huge page is split. split_huge_page() adds tail pages to LRU list. Since we are reclaiming a huge page, it's better we reclaim all subpages of the huge page instead of just the head page. This patch adds split tail pages to shrink page list so the tail pages can be reclaimed soon. Before this patch, run a swap workload: thp_fault_alloc 3492 thp_fault_fallback 608 thp_collapse_alloc 6 thp_collapse_alloc_failed 0 thp_split 916 With this patch: thp_fault_alloc 4085 thp_fault_fallback 16 thp_collapse_alloc 90 thp_collapse_alloc_failed 0 thp_split 1272 fallback allocation is reduced a lot. [akpm@linux-foundation.org: fix CONFIG_SWAP=n build] Signed-off-by:
Shaohua Li <shli@fusionio.com> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
-
Seth Jennings authored
To prevent flooding the swap device with writebacks, frontswap backends need to count and limit the number of outstanding writebacks. The incrementing of the counter can be done before the call to __swap_writepage(). However, the caller must receive a notification when the writeback completes in order to decrement the counter. To achieve this functionality, this patch modifies __swap_writepage() to take the bio completion callback function as an argument. end_swap_bio_write(), the normal bio completion function, is also made non-static so that code doing the accounting can call it after the accounting is done. There should be no behavioural change to existing code. Signed-off-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by:
Bob Liu <bob.liu@oracle.com> Acked-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Seth Jennings authored
swap_writepage() is currently where frontswap hooks into the swap write path to capture pages with the frontswap_store() function. However, if a frontswap backend wants to "resume" the writeback of a page to the swap device, it can't call swap_writepage() as the page will simply reenter the backend. This patch separates swap_writepage() into a top and bottom half, the bottom half named __swap_writepage() to allow a frontswap backend, like zswap, to resume writeback beyond the frontswap_store() hook. __add_to_swap_cache() is also made non-static so that the page for which writeback is to be resumed can be added to the swap cache. Signed-off-by:
-
Cyril Hrubis authored
Fix a corner case for MAP_FIXED when requested mapping length is larger than rlimit for virtual memory. In such case any overlapping mappings are unmapped before we check for the limit and return ENOMEM. The check is moved before the loop that unmaps overlapping parts of existing mappings. When we are about to hit the limit (currently mapped pages + len > limit) we scan for overlapping pages and check again accounting for them. This fixes situation when userspace program expects that the previous mappings are preserved after the mmap() syscall has returned with error. (POSIX clearly states that successfull mapping shall replace any previous mappings.) This corner case was found and can be tested with LTP testcase: testcases/open_posix_testsuite/conformance/interfaces/mmap/24-2.c In this case the mmap, which is clearly over current limit, unmaps dynamic libraries and the testcase segfaults right after returning into userspace. I've also looked at the second instance of the unmapping loop in the do_brk(). The do_brk() is called from brk() syscall and from vm_brk(). The brk() syscall checks for overlapping mappings and bails out when there are any (so it can't be triggered from the brk syscall). The vm_brk() is called only from binmft handlers so it shouldn't be triggered unless binmft handler created overlapping mappings. Signed-off-by:
Cyril Hrubis <chrubis@suse.cz> Reviewed-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
-
Anton Vorontsov authored
With this patch userland applications that want to maintain the interactivity/memory allocation cost can use the pressure level notifications. The levels are defined like this: The "low" level means that the system is reclaiming memory for new allocations. Monitoring this reclaiming activity might be useful for maintaining cache level. Upon notification, the program (typically "Activity Manager") might analyze vmstat and act in advance (i.e. prematurely shutdown unimportant services). The "medium" level means that the system is experiencing medium memory pressure, the system might be making swap, paging out active file caches, etc. Upon this event applications may decide to further analyze vmstat/zoneinfo/memcg or internal memory usage statistics and free any resources that can be easily reconstructed or re-read from a disk. The "critical" level means that the system is actively thrashing, it is about to out of memory (OOM) or even the in-kernel OOM killer is on its way to trigger. Applications should do whatever they can to help the system. It might be too late to consult with vmstat or any other statistics, so it's advisable to take an immediate action. The events are propagated upward until the event is handled, i.e. the events are not pass-through. Here is what this means: for example you have three cgroups: A->B->C. Now you set up an event listener on cgroups A, B and C, and suppose group C experiences some pressure. In this situation, only group C will receive the notification, i.e. groups A and B will not receive it. This is done to avoid excessive "broadcasting" of messages, which disturbs the system and which is especially bad if we are low on memory or thrashing. So, organize the cgroups wisely, or propagate the events manually (or, ask us to implement the pass-through events, explaining why would you need them.) Performance wise, the memory pressure notifications feature itself is lightweight and does not require much of bookkeeping, in contrast to the rest of memcg features. Unfortunately, as of current memcg implementation, pages accounting is an inseparable part and cannot be turned off. The good news is that there are some efforts[1] to improve the situation; plus, implementing the same, fully API-compatible[2] interface for CONFIG_MEMCG=n case (e.g. embedded) is also a viable option, so it will not require any changes on the userland side. [1] http://permalink.gmane.org/gmane.linux.kernel.cgroups/6291 [2] http://lkml.org/lkml/2013/2/21/454 [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_CGROPUPS=n warnings] Signed-off-by:
Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by:
Kirill A. Shutemov <kirill@shutemov.name> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Leonid Moiseichuk <leonid.moiseichuk@nokia.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Rasmus Villemoes authored
In madvise(), there doesn't seem to be any reason for taking the ¤t->mm->mmap_sem before start and len_in have been validated. Incidentally, this removes the need for the out: label. [akpm@linux-foundation.org: s/out_plug/out/, per David] Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
David Rientjes authored
__remove_pages() is only necessary for CONFIG_MEMORY_HOTREMOVE. PowerPC pseries will return -EOPNOTSUPP if unsupported. Adding an #ifdef causes several other functions it depends on to also become unnecessary, which saves in .text when disabled (it's disabled in most defconfigs besides powerpc, including x86). remove_memory_block() becomes static since it is not referenced outside of drivers/base/memory.c. Build tested on x86 and powerpc with CONFIG_MEMORY_HOTREMOVE both enabled and disabled. Signed-off-by:
-
Toshi Kani authored
Change __remove_pages() to call release_mem_region_adjustable(). This allows a requested memory range to be released from the iomem_resource table even if it does not match exactly to an resource entry but still fits into. The resource entries initialized at bootup usually cover the whole contiguous memory ranges and may not necessarily match with the size of memory hot-delete requests. If release_mem_region_adjustable() failed, __remove_pages() emits a warning message and continues to proceed as it was the case with release_mem_region(). release_mem_region(), which is defined to __release_region(), emits a warning message and returns no error since a void function. Signed-off-by:
-
Toshi Kani authored
Add release_mem_region_adjustable(), which releases a requested region from a currently busy memory resource. This interface adjusts the matched memory resource accordingly even if the requested region does not match exactly but still fits into. This new interface is intended for memory hot-delete. During bootup, memory resources are inserted from the boot descriptor table, such as EFI Memory Table and e820. Each memory resource entry usually covers the whole contigous memory range. Memory hot-delete request, on the other hand, may target to a particular range of memory resource, and its size can be much smaller than the whole contiguous memory. Since the existing release interfaces like __release_region() require a requested region to be exactly matched to a resource entry, they do not allow a partial resource to be released. This new interface is restrictive (i.e. release under certain conditions), which is consistent with other release interfaces, __release_region() and __release_resource(). Additional release conditions, such as an overlapping region to a resource entry, can be supported after they are confirmed as valid cases. There is no change to the existing interfaces since their restriction is valid for I/O resources. [akpm@linux-foundation.org: use GFP_ATOMIC under write_lock()] [akpm@linux-foundation.org: switch back to GFP_KERNEL, less buggily] [akpm@linux-foundation.org: remove unneeded and wrong kfree(), per Toshi] Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Cc: T Makphaibulchoke <tmac@hp.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Signed-off-by:
-
Toshi Kani authored
Add __adjust_resource(), which is called by adjust_resource() internally after the resource_lock is held. There is no interface change to adjust_resource(). This change allows other functions to call __adjust_resource() internally while the resource_lock is held. Signed-off-by:
-
Srivatsa S. Bhat authored
The comment over migrate_pages() looks quite weird, and makes it hard to grasp what it is trying to say. Rewrite it more comprehensibly. Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Minchan Kim authored
Currently the memory barrier in __do_huge_pmd_anonymous_page doesn't work. Because lru_cache_add_lru uses pagevec so it could miss spinlock easily so above rule was broken so user might see inconsistent data. I was not first person who pointed out the problem. Mel and Peter pointed out a few months ago and Peter pointed out further that even spin_lock/unlock can't make sure of it: http://marc.info/?t=134333512700004 In particular: *A = a; LOCK UNLOCK *B = b; may occur as: LOCK, STORE *B, STORE *A, UNLOCK At last, Hugh pointed out that even we don't need memory barrier in there because __SetPageUpdate already have done it from Nick's commit 0ed361de ("mm: fix PageUptodate data race") explicitly. So this patch fixes comment on THP and adds same comment for do_anonymous_page, too because everybody except Hugh was missing that. It means we need a comment about that. Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
-
Yijing Wang authored
CONFIG_HOTPLUG is going away as an option, cleanup CONFIG_HOTPLUG ifdefs in mm files. Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Acked-by:
-
Michel Lespinasse authored
Just a trivial issue I stumbled on while doing something else... Signed-off-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
-
Andrew Shewmaker authored
Alter the admin and user reserves of the previous patches in this series when memory is added or removed. If memory is added and the reserves have been eliminated or increased above the default max, then we'll trust the admin. If memory is removed and there isn't enough free memory, then we need to reset the reserves. Otherwise keep the reserve set by the admin. The reserve reset code is the same as the reserve initialization code. I tested hot addition and removal by triggering it via sysfs. The reserves shrunk when they were set high and memory was removed. They were reset higher when memory was added again. [akpm@linux-foundation.org: use register_hotmemory_notifier()] [akpm@linux-foundation.org: init_user_reserve() and init_admin_reserve can no longer be __meminit] [fengguang.wu@intel.com: make init_reserve_notifier() static] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Andrew Shewmaker <agshew@gmail.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Andrew Shewmaker authored
Add an admin_reserve_kbytes knob to allow admins to change the hardcoded memory reserve to something other than 3%, which may be multiple gigabytes on large memory systems. Only about 8MB is necessary to enable recovery in the default mode, and only a few hundred MB are required even when overcommit is disabled. This affects OVERCOMMIT_GUESS and OVERCOMMIT_NEVER. admin_reserve_kbytes is initialized to min(3% free pages, 8MB) I arrived at 8MB by summing the RSS of sshd or login, bash, and top. Please see first patch in this series for full background, motivation, testing, and full changelog. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make init_admin_reserve() static] Signed-off-by:
-
Andrew Shewmaker authored
Add user_reserve_kbytes knob. Limit the growth of the memory reserved for other user processes to min(3% current process size, user_reserve_pages). Only about 8MB is necessary to enable recovery in the default mode, and only a few hundred MB are required even when overcommit is disabled. user_reserve_pages defaults to min(3% free pages, 128MB) I arrived at 128MB by taking the max VSZ of sshd, login, bash, and top ... then adding the RSS of each. This only affects OVERCOMMIT_NEVER mode. Background 1. user reserve __vm_enough_memory reserves a hardcoded 3% of the current process size for other applications when overcommit is disabled. This was done so that a user could recover if they launched a memory hogging process. Without the reserve, a user would easily run into a message such as: bash: fork: Cannot allocate memory 2. admin reserve Additionally, a hardcoded 3% of free memory is reserved for root in both overcommit 'guess' and 'never' modes. This was intended to prevent a scenario where root-cant-log-in and perform recovery operations. Note that this reserve shrinks, and doesn't guarantee a useful reserve. Motivation The two hardcoded memory reserves should be updated to account for current memory sizes. Also, the admin reserve would be more useful if it didn't shrink too much. When the current code was originally written, 1GB was considered "enterprise". Now the 3% reserve can grow to multiple GB on large memory systems, and it only needs to be a few hundred MB at most to enable a user or admin to recover a system with an unwanted memory hogging process. I've found that reducing these reserves is especially beneficial for a specific type of application load: * single application system * one or few processes (e.g. one per core) * allocating all available memory * not initializing every page immediately * long running I've run scientific clusters with this sort of load. A long running job sometimes failed many hours (weeks of CPU time) into a calculation. They weren't initializing all of their memory immediately, and they weren't using calloc, so I put systems into overcommit 'never' mode. These clusters run diskless and have no swap. However, with the current reserves, a user wishing to allocate as much memory as possible to one process may be prevented from using, for example, almost 2GB out of 32GB. The effect is less, but still significant when a user starts a job with one process per core. I have repeatedly seen a set of processes requesting the same amount of memory fail because one of them could not allocate the amount of memory a user would expect to be able to allocate. For example, Message Passing Interfce (MPI) processes, one per core. And it is similar for other parallel programming frameworks. Changing this reserve code will make the overcommit never mode more useful by allowing applications to allocate nearly all of the available memory. Also, the new admin_reserve_kbytes will be safer than the current behavior since the hardcoded 3% of available memory reserve can shrink to something useless in the case where applications have grabbed all available memory. Risks * "bash: fork: Cannot allocate memory" The downside of the first patch-- which creates a tunable user reserve that is only used in overcommit 'never' mode--is that an admin can set it so low that a user may not be able to kill their process, even if they already have a shell prompt. Of course, a user can get in the same predicament with the current 3% reserve--they just have to launch processes until 3% becomes negligible. * root-cant-log-in problem The second patch, adding the tunable rootuser_reserve_pages, allows the admin to shoot themselves in the foot by setting it too small. They can easily get the system into a state where root-can't-log-in. However, the new admin_reserve_kbytes will be safer than the current behavior since the hardcoded 3% of available memory reserve can shrink to something useless in the case where applications have grabbed all available memory. Alternatives * Memory cgroups provide a more flexible way to limit application memory. Not everyone wants to set up cgroups or deal with their overhead. * We could create a fourth overcommit mode which provides smaller reserves. The size of useful reserves may be drastically different depending on the whether the system is embedded or enterprise. * Force users to initialize all of their memory or use calloc. Some users don't want/expect the system to overcommit when they malloc. Overcommit 'never' mode is for this scenario, and it should work well. The new user and admin reserve tunables are simple to use, with low overhead compared to cgroups. The patches preserve current behavior where 3% of memory is less than 128MB, except that the admin reserve doesn't shrink to an unusable size under pressure. The code allows admins to tune for embedded and enterprise usage. FAQ * How is the root-cant-login problem addressed? What happens if admin_reserve_pages is set to 0? Root is free to shoot themselves in the foot by setting admin_reserve_kbytes too low. On x86_64, the minimum useful reserve is: 8MB for overcommit 'guess' 128MB for overcommit 'never' admin_reserve_pages defaults to min(3% free memory, 8MB) So, anyone switching to 'never' mode needs to adjust admin_reserve_pages. * How do you calculate a minimum useful reserve? A user or the admin needs enough memory to login and perform recovery operations, which includes, at a minimum: sshd or login + bash (or some other shell) + top (or ps, kill, etc.) For overcommit 'guess', we can sum resident set sizes (RSS) because we only need enough memory to handle what the recovery programs will typically use. On x86_64 this is about 8MB. For overcommit 'never', we can take the max of their virtual sizes (VSZ) and add the sum of their RSS. We use VSZ instead of RSS because mode forces us to ensure we can fulfill all of the requested memory allocations-- even if the programs only use a fraction of what they ask for. On x86_64 this is about 128MB. When swap is enabled, reserves are useful even when they are as small as 10MB, regardless of overcommit mode. When both swap and overcommit are disabled, then the admin should tune the reserves higher to be absolutley safe. Over 230MB each was safest in my testing. * What happens if user_reserve_pages is set to 0? Note, this only affects overcomitt 'never' mode. Then a user will be able to allocate all available memory minus admin_reserve_kbytes. However, they will easily see a message such as: "bash: fork: Cannot allocate memory" And they won't be able to recover/kill their application. The admin should be able to recover the system if admin_reserve_kbytes is set appropriately. * What's the difference between overcommit 'guess' and 'never'? "Guess" allows an allocation if there are enough free + reclaimable pages. It has a hardcoded 3% of free pages reserved for root. "Never" allows an allocation if there is enough swap + a configurable percentage (default is 50) of physical RAM. It has a hardcoded 3% of free pages reserved for root, like "Guess" mode. It also has a hardcoded 3% of the current process size reserved for additional applications. * Why is overcommit 'guess' not suitable even when an app eventually writes to every page? It takes free pages, file pages, available swap pages, reclaimable slab pages into consideration. In other words, these are all pages available, then why isn't overcommit suitable? Because it only looks at the present state of the system. It does not take into account the memory that other applications have malloced, but haven't initialized yet. It overcommits the system. Test Summary There was little change in behavior in the default overcommit 'guess' mode with swap enabled before and after the patch. This was expected. Systems run most predictably (i.e. no oom kills) in overcommit 'never' mode with swap enabled. This also allowed the most memory to be allocated to a user application. Overcommit 'guess' mode without swap is a bad idea. It is easy to crash the system. None of the other tested combinations crashed. This matches my experience on the Roadrunner supercomputer. Without the tunable user reserve, a system in overcommit 'never' mode and without swap does not allow the admin to recover, although the admin can. With the new tunable reserves, a system in overcommit 'never' mode and without swap can be configured to: 1. maximize user-allocatable memory, running close to the edge of recoverability 2. maximize recoverability, sacrificing allocatable memory to ensure that a user cannot take down a system Test Description Fedora 18 VM - 4 x86_64 cores, 5725MB RAM, 4GB Swap System is booted into multiuser console mode, with unnecessary services turned off. Caches were dropped before each test. Hogs are user memtester processes that attempt to allocate all free memory as reported by /proc/meminfo In overcommit 'never' mode, memory_ratio=100 Test Results 3.9.0-rc1-mm1 Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery ---------- ---- ---- ------------- ---- ------------- -------------- guess yes 1 5432/5432 no yes yes guess yes 4 5444/5444 1 yes yes guess no 1 5302/5449 no yes yes guess no 4 - crash no no never yes 1 5460/5460 1 yes yes never yes 4 5460/5460 1 yes yes never no 1 5218/5432 no no yes never no 4 5203/5448 no no yes 3.9.0-rc1-mm1-tunablereserves User and Admin Recovery show their respective reserves, if applicable. Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery ---------- ---- ---- ------------- ---- ------------- -------------- guess yes 1 5419/5419 no - yes 8MB yes guess yes 4 5436/5436 1 - yes 8MB yes guess no 1 5440/5440 * - yes 8MB yes guess no 4 - crash - no 8MB no * process would successfully mlock, then the oom killer would pick it never yes 1 5446/5446 no 10MB yes 20MB yes never yes 4 5456/5456 no 10MB yes 20MB yes never no 1 5387/5429 no 128MB no 8MB barely never no 1 5323/5428 no 226MB barely 8MB barely never no 1 5323/5428 no 226MB barely 8MB barely never no 1 5359/5448 no 10MB no 10MB barely never no 1 5323/5428 no 0MB no 10MB barely never no 1 5332/5428 no 0MB no 50MB yes never no 1 5293/5429 no 0MB no 90MB yes never no 1 5001/5427 no 230MB yes 338MB yes never no 4* 4998/5424 no 230MB yes 338MB yes * more memtesters were launched, able to allocate approximately another 100MB Future Work - Test larger memory systems. - Test an embedded image. - Test other architectures. - Time malloc microbenchmarks. - Would it be useful to be able to set overcommit policy for each memory cgroup? - Some lines are slightly above 80 chars. Perhaps define a macro to convert between pages and kb? Other places in the kernel do this. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make init_user_reserve() static] Signed-off-by: -
Andrew Morton authored
Use the new interface, remove one ifdef. No code size changes. We could/should have been using __meminit/__meminitdata here but there's now no point in doing that because all this code is elided at compile time. Cc: Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Andrew Morton authored
Saves an ifdef, no code size changes Signed-off-by:
-
Andrew Morton authored
Squishes a warning which my change to hotplug_memory_notifier() added. I want to keep that warning, because it is punishment for failnig to check the hotplug_memory_notifier() return value. Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andrew Morton authored
Squishes a statement-with-no-effect warning, removes some ifdefs and shrinks .text by 2 bytes. Note that this code fails to check for blocking_notifier_chain_register() failures. Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Andrew Morton authored
Squishes a statement-with-no-effect warning, removes some ifdefs and shrinks .text by one byte! Note that this code fails to check for blocking_notifier_chain_register() failures. Signed-off-by:
-
Andrew Morton authored
When CONFIG_MEMORY_HOTPLUG=n, we don't want the memory-hotplug notifier handlers to be included in the .o files, for space reasons. The existing hotplug_memory_notifier() tries to handle this but testing with gcc-4.4.4 shows that it doesn't work - the hotplug functions are still present in the .o files. So implement a new register_hotmemory_notifier() which is a copy of register_hotcpu_notifier(), and which actually works as desired. hotplug_memory_notifier() and register_memory_notifier() callsites should be converted to use this new register_hotmemory_notifier(). While we're there, let's repair the existing hotplug_memory_notifier(): it simply stomps on the register_memory_notifier() return value, so well-behaved code cannot check for errors. Apparently non of the existing callers were well-behaved :( Cc: Andrew Shewmaker <agshew@gmail.com> Signed-off-by:
-
Cody P Schafer authored
[sfr@canb.auug.org.au: add missing semicolon] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Cody P Schafer authored
powerpc and x86 were opencoding copies of setup_nr_node_ids(), which page_alloc provides but makes static. Make it avaliable to the archs in linux/mm.h. Signed-off-by:
-
Russ Anderson authored
When booting on a large memory system, the kernel spends considerable time in memmap_init_zone() setting up memory zones. Analysis shows significant time spent in __early_pfn_to_nid(). The routine memmap_init_zone() checks each PFN to verify the nid is valid. __early_pfn_to_nid() sequentially scans the list of pfn ranges to find the right range and returns the nid. This does not scale well. On a 4 TB (single rack) system there are 308 memory ranges to scan. The higher the PFN the more time spent sequentially spinning through memory ranges. Since memmap_init_zone() increments pfn, it will almost always be looking for the same range as the previous pfn, so check that range first. If it is in the same range, return that nid. If not, scan the list as before. A 4 TB (single rack) UV1 system takes 512 seconds to get through the zone code. This performance optimization reduces the time by 189 seconds, a 36% improvement. A 2 TB (single rack) UV2 system goes from 212.7 seconds to 99.8 seconds, a 112.9 second (53%) reduction. [akpm@linux-foundation.org: make the statics __meminitdata] [akpm@linux-foundation.org: fix comment formatting] [akpm@linux-foundation.org: fix ia64, per yinghai] [akpm@linux-foundation.org: add missing semicolon, per Tony] Signed-off-by:
Russ Anderson <rja@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Tested-by:
"Luck, Tony" <tony.luck@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Lin Feng <linfeng@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by:
-
Jianguo Wu authored
Signed-off-by:
Jianguo Wu <wujianguo@huawei.com> Signed-off-by:
-
Mel Gorman authored
The following problem was reported against a distribution kernel when zone_reclaim was enabled but the same problem applies to the mainline kernel. The reproduction case was as follows 1. Run numactl -m +0 dd if=largefile of=/dev/null This allocates a large number of clean pages in node 0 2. numactl -N +0 memhog 0.5*Mg This start a memory-using application in node 0. The expected behaviour is that the clean pages get reclaimed and the application uses node 0 for its memory. The observed behaviour was that the memory for the memhog application was allocated off-node since commits cd38b115 ("mm: page allocator: initialise ZLC for first zone eligible for zone_reclaim") and commit 76d3fbf8 ("mm: page allocator: reconsider zones for allocation after direct reclaim"). The assumption of those patches was that it was always preferable to allocate quickly than stall for long periods of time and they were meant to take care that the zone was only marked full when necessary but an important case was missed. In the allocator fast path, only the low watermarks are checked. If the zones free pages are between the low and min watermark then allocations from the allocators slow path will succeed. However, zone_reclaim will only reclaim SWAP_CLUSTER_MAX or 1<<order pages. There is no guarantee that this will meet the low watermark causing the zone to be marked full prematurely. This patch will only mark the zone full after zone_reclaim if it the min watermarks are checked or if page reclaim failed to make sufficient progress. [mhocko@suse.cz: fix alloc_flags test] Signed-off-by:
Hedi Berriche <hedi@sgi.com> Tested-by:
Michal Hocko <mhocko@suse.cz> Reviewed-by:
-
Johannes Weiner authored
Memory hotplug can happen on a machine under load, memory shortness and fragmentation, so huge page allocations for the vmemmap are not guaranteed to succeed. Try to fall back to regular pages before failing the hotplug event completely. Signed-off-by:
-
Johannes Weiner authored
We already have generic code to allocate vmemmap with regular pages, use it. Signed-off-by:
-
Johannes Weiner authored
No need to maintain addr_end and p_end when they are never actually read anywhere on !pse setups. Remove the dead code. Signed-off-by:
-
Johannes Weiner authored
The sparse code, when asking the architecture to populate the vmemmap, specifies the section range as a starting page and a number of pages. This is an awkward interface, because none of the arch-specific code actually thinks of the range in terms of 'struct page' units and always translates it to bytes first. In addition, later patches mix huge page and regular page backing for the vmemmap. For this, they need to call vmemmap_populate_basepages() on sub-section ranges with PAGE_SIZE and PMD_SIZE in mind. But these are not necessarily multiples of the 'struct page' size and so this unit is too coarse. Just translate the section range into bytes once in the generic sparse code, then pass byte ranges down the stack. Signed-off-by:
David S. Miller <davem@davemloft.net> Tested-by:
-
Ben Hutchings authored
Hot-adding memory on x86_64 normally requires huge page allocation. When this is done to a VM guest, it's usually because the system is already tight on memory, so the request tends to fail. Try to avoid this by adding __GFP_REPEAT to the allocation flags. Addresses http://bugs.debian.org/699913Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Bernhard Schmidt <Bernhard.Schmidt@lrz.de> Tested-by:
-
David Rientjes authored
Particularly in oom conditions, it's troublesome that hugetlb memory is not displayed. All other meminfo that is emitted will not add up to what is expected, and there is no artifact left in the kernel log to show that a potentially significant amount of memory is actually allocated as hugepages which are not available to be reclaimed. Booting with hugepages=8192 on the command line, this memory is now shown in oom conditions. For example, with echo m > /proc/sysrq-trigger: Node 0 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB Node 1 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB Node 2 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB Node 3 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
