- 29 Nov, 2013 40 commits
-
-
Jeff Moyer authored
commit 4912aa6c upstream. crocode i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support shpchp ioatdma dca be2net sg ses enclosure ext4 mbcache jbd2 sd_mod crc_t10dif ahci megaraid_sas(U) dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 491, comm: scsi_eh_0 Tainted: G W ---------------- 2.6.32-220.13.1.el6.x86_64 #1 IBM -[8722PAX]-/00D1461 RIP: 0010:[<ffffffff8124e424>] [<ffffffff8124e424>] blk_requeue_request+0x94/0xa0 RSP: 0018:ffff881057eefd60 EFLAGS: 00010012 RAX: ffff881d99e3e8a8 RBX: ffff881d99e3e780 RCX: ffff881d99e3e8a8 RDX: ffff881d99e3e8a8 RSI: ffff881d99e3e780 RDI: ffff881d99e3e780 RBP: ffff881057eefd80 R08: ffff881057eefe90 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff881057f92338 R13: 0000000000000000 R14: ffff881057f92338 R15: ffff883058188000 FS: 0000000000000000(0000) GS:ffff880040200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006d3ec0 CR3: 000000302cd7d000 CR4: 00000000000406b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process scsi_eh_0 (pid: 491, threadinfo ffff881057eee000, task ffff881057e29540) Stack: 0000000000001057 0000000000000286 ffff8810275efdc0 ffff881057f16000 <0> ffff881057eefdd0 ffffffff81362323 ffff881057eefe20 ffffffff8135f393 <0> ffff881057e29af8 ffff8810275efdc0 ffff881057eefe78 ffff881057eefe90 Call Trace: [<ffffffff81362323>] __scsi_queue_insert+0xa3/0x150 [<ffffffff8135f393>] ? scsi_eh_ready_devs+0x5e3/0x850 [<ffffffff81362a23>] scsi_queue_insert+0x13/0x20 [<ffffffff8135e4d4>] scsi_eh_flush_done_q+0x104/0x160 [<ffffffff8135fb6b>] scsi_error_handler+0x35b/0x660 [<ffffffff8135f810>] ? scsi_error_handler+0x0/0x660 [<ffffffff810908c6>] kthread+0x96/0xa0 [<ffffffff8100c14a>] child_rip+0xa/0x20 [<ffffffff81090830>] ? kthread+0x0/0xa0 [<ffffffff8100c140>] ? child_rip+0x0/0x20 Code: 00 00 eb d1 4c 8b 2d 3c 8f 97 00 4d 85 ed 74 bf 49 8b 45 00 49 83 c5 08 48 89 de 4c 89 e7 ff d0 49 8b 45 00 48 85 c0 75 eb eb a4 <0f> 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 89 e5 0f 1f 44 00 00 RIP [<ffffffff8124e424>] blk_requeue_request+0x94/0xa0 RSP <ffff881057eefd60> The RIP is this line: BUG_ON(blk_queued_rq(rq)); After digging through the code, I think there may be a race between the request completion and the timer handler running. A timer is started for each request put on the device's queue (see blk_start_request->blk_add_timer). If the request does not complete before the timer expires, the timer handler (blk_rq_timed_out_timer) will mark the request complete atomically: static inline int blk_mark_rq_complete(struct request *rq) { return test_and_set_bit(REQ_ATOM_COMPLETE, &rq->atomic_flags); } and then call blk_rq_timed_out. The latter function will call scsi_times_out, which will return one of BLK_EH_HANDLED, BLK_EH_RESET_TIMER or BLK_EH_NOT_HANDLED. If BLK_EH_RESET_TIMER is returned, blk_clear_rq_complete is called, and blk_add_timer is again called to simply wait longer for the request to complete. Now, if the request happens to complete while this is going on, what happens? Given that we know the completion handler will bail if it finds the REQ_ATOM_COMPLETE bit set, we need to focus on the completion handler running after that bit is cleared. So, from the above paragraph, after the call to blk_clear_rq_complete. If the completion sets REQ_ATOM_COMPLETE before the BUG_ON in blk_add_timer, we go boom there (I haven't seen this in the cores). Next, if we get the completion before the call to list_add_tail, then the timer will eventually fire for an old req, which may either be freed or reallocated (there is evidence that this might be the case). Finally, if the completion comes in *after* the addition to the timeout list, I think it's harmless. The request will be removed from the timeout list, req_atom_complete will be set, and all will be well. This will only actually explain the coredumps *IF* the request structure was freed, reallocated *and* queued before the error handler thread had a chance to process it. That is possible, but it may make sense to keep digging for another race. I think that if this is what was happening, we would see other instances of this problem showing up as null pointer or garbage pointer dereferences, for example when the request structure was not re-used. It looks like we actually do run into that situation in other reports. This patch moves the BUG_ON(test_bit(REQ_ATOM_COMPLETE, &req->atomic_flags)); from blk_add_timer to the only caller that could trip over it (blk_start_request). It then inverts the calls to blk_clear_rq_complete and blk_add_timer in blk_rq_timed_out to address the race. I've boot tested this patch, but nothing more. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Acked-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
commit e41fae2b upstream. Bit 2 of status register 2 on MAX6696 (external diode 2 open) sets ALERT; the bit thus has to be listed in alert_alarms. Also display a message in the alert handler if the condition is encountered. Even though not all overtemperature conditions cause ALERT to be set, we should not ignore them in the alert handler. Display messages for all out-of-range conditions. Reported-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Christoffer Dall authored
commit 40c2729b upstream. Using virt_to_phys on percpu mappings is horribly wrong as it may be backed by vmalloc. Introduce kvm_kaddr_to_phys which translates both types of valid kernel addresses to the corresponding physical address. At the same time resolves a typing issue where we were storing the physical address as a 32 bit unsigned long (on arm), truncating the physical address for addresses above the 4GB limit. This caused breakage on Keystone. Reported-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Greg Edwards authored
commit 27ef63c7 upstream. When determining the page size we could use to map with the IOMMU, the page size should also be aligned with the hva, not just the gfn. The gfn may not reflect the real alignment within the hugetlbfs file. Most of the time, this works fine. However, if the hugetlbfs file is backed by non-contiguous huge pages, a multi-huge page memslot starts at an unaligned offset within the hugetlbfs file, and the gfn is aligned with respect to the huge page size, kvm_host_page_size() will return the huge page size and we will use that to map with the IOMMU. When we later unpin that same memslot, the IOMMU returns the unmap size as the huge page size, and we happily unpin that many pfns in monotonically increasing order, not realizing we are spanning non-contiguous huge pages and partially unpin the wrong huge page. Ensure the IOMMU mapping page size is aligned with the hva corresponding to the gfn, which does reflect the alignment within the hugetlbfs file. Reviewed-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Greg Edwards <gedwards@ddn.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Kevin Hao authored
commit ab4ead02 upstream. In commit 8a4d0a68 "ftrace: Use breakpoint method to update ftrace caller", we choose to use breakpoint method to update the ftrace caller. But we also need to skip over the breakpoint in function ftrace_int3_handler() for them. Otherwise weird things would happen. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Paolo Bonzini authored
commit daf72722 upstream. When I was looking at RHEL5.9's failure to start with unrestricted_guest=0/emulate_invalid_guest_state=1, I got it working with a slightly older tree than kvm.git. I now debugged the remaining failure, which was introduced by commit 660696d1 (KVM: X86 emulator: fix source operand decoding for 8bit mov[zs]x instructions, 2013-04-24) introduced a similar mis-emulation to the one in commit 8acb4207 (KVM: fix sil/dil/bpl/spl in the mod/rm fields, 2013-05-30). The incorrect decoding occurs in 8-bit movzx/movsx instructions whose 8-bit operand is sil/dil/bpl/spl. Needless to say, "movzbl %bpl, %eax" does occur in RHEL5.9's decompression prolog, just a handful of instructions before finally giving control to the decompressed vmlinux and getting out of the invalid guest state. Because OpMem8 bypasses decode_modrm, the same handling of the REX prefix must be applied to OpMem8. Reported-by:
Michele Baldessari <michele@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Thomas Renninger authored
commit 11f918d3 upstream. Do it the same way as done in microcode_intel.c: use pr_debug() for missing firmware files. There seem to be CPUs out there for which no microcode update has been submitted to kernel-firmware repo yet resulting in scary sounding error messages in dmesg: microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin Signed-off-by:
Thomas Renninger <trenn@suse.de> Acked-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1384274383-43510-1-git-send-email-trenn@suse.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
commit 987da479 upstream. Use a straight goto error label style in nfsd_setattr to make sure we always do the put_write_access call after we got it earlier. Note that the we have been failing to do that in the case nfsd_break_lease() returns an error, a bug introduced into 2.6.38 with 6a76bebe "nfsd4: break lease on nfsd setattr". Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
commit 818e5a22 upstream. Split out two helpers to make the code more readable and easier to verify for correctness. Signed-off-by:
-
J. Bruce Fields authored
commit 427d6c66 upstream. Someone noticed exportfs happily accepted exports that would later be rejected when mountd tried to give them to the kernel. Fix this. This is a regression from 4c1e1b34 "nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids". Cc: "Eric W. Biederman" <ebiederm@xmission.com> Reported-by:
Yin.JianHong <jiyin@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit d49f042a upstream. Currently, if the call to nfs_refresh_inode fails, then we end up leaking a reference count, due to the call to nfs4_get_open_state. While we're at it, replace nfs4_get_open_state with a simple call to atomic_inc(); there is no need to do a full lookup of the struct nfs_state since it is passed as an argument in the struct nfs4_opendata, and is already assigned to the variable 'state'. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Weston Andros Adamson authored
commit d2bfda2e upstream. Cached opens have already been handled by _nfs4_opendata_reclaim_to_nfs4_state and can safely skip being reprocessed, but must still call update_open_stateid to make sure that all active fmodes are recovered. Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
-
Weston Andros Adamson authored
commit a43ec98b upstream. This is an unneeded check that could cause the client to fail to recover opens. Signed-off-by:
-
Weston Andros Adamson authored
commit f494a607 upstream. _nfs4_opendata_reclaim_to_nfs4_state doesn't expect to see a cached open CLAIM_PREVIOUS, but this can happen. An example is when there are RDWR openers and RDONLY openers on a delegation stateid. The recovery path will first try an open CLAIM_PREVIOUS for the RDWR openers, this marks the delegation as not needing RECLAIM anymore, so the open CLAIM_PREVIOUS for the RDONLY openers will not actually send an rpc. The NULL dereference is due to _nfs4_opendata_reclaim_to_nfs4_state returning PTR_ERR(rpc_status) when !rpc_done. When the open is cached, rpc_done == 0 and rpc_status == 0, thus _nfs4_opendata_reclaim_to_nfs4_state returns NULL - this is unexpected by callers of nfs4_opendata_to_nfs4_state(). This can be reproduced easily by opening the same file two times on an NFSv4.0 mount with delegations enabled, once as RDWR and once as RDONLY then sleeping for a long time. While the files are held open, kick off state recovery and this NULL dereference will be hit every time. An example OOPS: [ 65.003602] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000030 [ 65.005312] IP: [<ffffffffa037d6ee>] __nfs4_close+0x1e/0x160 [nfsv4] [ 65.006820] PGD 7b0ea067 PUD 791ff067 PMD 0 [ 65.008075] Oops: 0000 [#1] SMP [ 65.008802] Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache snd_ens1371 gameport nfsd snd_rawmidi snd_ac97_codec ac97_bus btusb snd_seq snd _seq_device snd_pcm ppdev bluetooth auth_rpcgss coretemp snd_page_alloc crc32_pc lmul crc32c_intel ghash_clmulni_intel microcode rfkill nfs_acl vmw_balloon serio _raw snd_timer lockd parport_pc e1000 snd soundcore parport i2c_piix4 shpchp vmw _vmci sunrpc ata_generic mperf pata_acpi mptspi vmwgfx ttm scsi_transport_spi dr m mptscsih mptbase i2c_core [ 65.018684] CPU: 0 PID: 473 Comm: 192.168.10.85-m Not tainted 3.11.2-201.fc19 .x86_64 #1 [ 65.020113] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 [ 65.022012] task: ffff88003707e320 ti: ffff88007b906000 task.ti: ffff88007b906000 [ 65.023414] RIP: 0010:[<ffffffffa037d6ee>] [<ffffffffa037d6ee>] __nfs4_close+0x1e/0x160 [nfsv4] [ 65.025079] RSP: 0018:ffff88007b907d10 EFLAGS: 00010246 [ 65.026042] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 65.027321] RDX: 0000000000000050 RSI: 0000000000000001 RDI: 0000000000000000 [ 65.028691] RBP: ffff88007b907d38 R08: 0000000000016f60 R09: 0000000000000000 [ 65.029990] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 65.031295] R13: 0000000000000050 R14: 0000000000000000 R15: 0000000000000001 [ 65.032527] FS: 0000000000000000(0000) GS:ffff88007f600000(0000) knlGS:0000000000000000 [ 65.033981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 65.035177] CR2: 0000000000000030 CR3: 000000007b27f000 CR4: 00000000000407f0 [ 65.036568] Stack: [ 65.037011] 0000000000000000 0000000000000001 ffff88007b907d90 ffff88007a880220 [ 65.038472] ffff88007b768de8 ffff88007b907d48 ffffffffa037e4a5 ffff88007b907d80 [ 65.039935] ffffffffa036a6c8 ffff880037020e40 ffff88007a880000 ffff880037020e40 [ 65.041468] Call Trace: [ 65.042050] [<ffffffffa037e4a5>] nfs4_close_state+0x15/0x20 [nfsv4] [ 65.043209] [<ffffffffa036a6c8>] nfs4_open_recover_helper+0x148/0x1f0 [nfsv4] [ 65.044529] [<ffffffffa036a886>] nfs4_open_recover+0x116/0x150 [nfsv4] [ 65.045730] [<ffffffffa036d98d>] nfs4_open_reclaim+0xad/0x150 [nfsv4] [ 65.046905] [<ffffffffa037d979>] nfs4_do_reclaim+0x149/0x5f0 [nfsv4] [ 65.048071] [<ffffffffa037e1dc>] nfs4_run_state_manager+0x3bc/0x670 [nfsv4] [ 65.049436] [<ffffffffa037de20>] ? nfs4_do_reclaim+0x5f0/0x5f0 [nfsv4] [ 65.050686] [<ffffffffa037de20>] ? nfs4_do_reclaim+0x5f0/0x5f0 [nfsv4] [ 65.051943] [<ffffffff81088640>] kthread+0xc0/0xd0 [ 65.052831] [<ffffffff81088580>] ? insert_kthread_work+0x40/0x40 [ 65.054697] [<ffffffff8165686c>] ret_from_fork+0x7c/0xb0 [ 65.056396] [<ffffffff81088580>] ? insert_kthread_work+0x40/0x40 [ 65.058208] Code: 5c 41 5d 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 89 d5 41 54 53 48 89 fb <4c> 8b 67 30 f0 41 ff 44 24 44 49 8d 7c 24 40 e8 0e 0a 2d e1 44 [ 65.065225] RIP [<ffffffffa037d6ee>] __nfs4_close+0x1e/0x160 [nfsv4] [ 65.067175] RSP <ffff88007b907d10> [ 65.068570] CR2: 0000000000000030 [ 65.070098] ---[ end trace 0d1fe4f5c7dd6f8b ]--- Signed-off-by:
-
Trond Myklebust authored
commit a6f951dd upstream. In nfs4_proc_getlk(), when some error causes a retry of the call to _nfs4_proc_getlk(), we can end up with Oopses of the form BUG: unable to handle kernel NULL pointer dereference at 0000000000000134 IP: [<ffffffff8165270e>] _raw_spin_lock+0xe/0x30 <snip> Call Trace: [<ffffffff812f287d>] _atomic_dec_and_lock+0x4d/0x70 [<ffffffffa053c4f2>] nfs4_put_lock_state+0x32/0xb0 [nfsv4] [<ffffffffa053c585>] nfs4_fl_release_lock+0x15/0x20 [nfsv4] [<ffffffffa0522c06>] _nfs4_proc_getlk.isra.40+0x146/0x170 [nfsv4] [<ffffffffa052ad99>] nfs4_proc_lock+0x399/0x5a0 [nfsv4] The problem is that we don't clear the request->fl_ops after the first try and so when we retry, nfs4_set_lock_state() exits early without setting the lock stateid. Regression introduced by commit 70cc6487 (locks: make ->lock release private data before returning in GETLK case) Reported-by:
Jorge Mora <mora@netapp.com> Signed-off-by:
-
Takashi Iwai authored
commit d08c5ef2 upstream. Some models (or maybe depending on BIOS version) of Sony VAIO with ALC260 give no proper pin configurations as default, resulting in the non-working speaker, etc. Just provide the whole pin configurations via a fixup. Reported-by:
Matthew Markus <mmarkus@hearit.co> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Henningsson authored
commit b8362e70 upstream. BugLink: https://bugs.launchpad.net/bugs/1253636Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit 0f5a5b85 upstream. BIOS sets MISC_NO_PRESENCE bit wrongly to the pin config on NID 0x0f. Signed-off-by:
-
Takashi Iwai authored
commit 0fc28fc0 upstream. When a codec is resumed, it keeps the power on while the resuming phase via hda_keep_power_on(), then turns down via snd_hda_power_down(). At that point, snd_hda_power_down() notifies the power down to the controller, and this may confuse the refcount if the codec was already powered up before the resume. In the end result, the controller goes to runtime suspend even before the codec is kicked off to the power save, and the communication stalls happens. The fix is to add the power-up notification together with hda_keep_power_on(), and clears the flag appropriately. Signed-off-by:
-
Takashi Iwai authored
commit d183b4fc upstream. snd_hda_codec_reset() is called either in resetting the whole setup at error paths or hwdep clear/reconfig sysfs triggers. But all of these don't assume that the power has to be off, rather they want to keep the power state unchanged (e.g. reconfig_codec() calls the power up/down by itself). Thus, unconditionally clearing the power state in snd_hda_codec_reset() leads to the inconsistency, confuses the further operation. This patch gets rid of the lines doing that bad thing. Signed-off-by:
-
Takashi Iwai authored
commit 7a3e6107 upstream. The only EAPD on AD1986A is on NID 0x1b where usually the speaker. But this doesn't control only the speaker amp but may influence on all outputs, e.g. Lenovo N100 laptop seems to have this issue. Signed-off-by:
-
Takashi Iwai authored
commit 468ac413 upstream. We don't change the EAPD bit in set_pin_eapd() if keep_eapd_on flag is set by the codec driver and enable is false. But, we also apply the flipping of enable value according to inv_eapd flag in the same function, and this confused the former check, handled as if it's turned ON. The inverted EAPD check must be applied after keep_eapd_on check, instead. Signed-off-by:
-
David Henningsson authored
commit 5959a6bc upstream. In case there is both a multifunction headset jack and a Line Out jack, automuting was not working properly from the Line Out jack. This patch fixes that issue. BugLink: https://bugs.launchpad.net/bugs/1250377Tested-by:
Cyrus Lien <cyrus.lien@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit 487a588d upstream. BIOS on ASUS W5A laptop with ALC880 codec doesn't provide any pin configurations, so we have to set up all pins manually. Reported-and-tested-by:
nb <nb@dagami.org> Signed-off-by:
-
Takashi Iwai authored
commit 8f42d769 upstream. It's a superset of the existing CX2075x codecs, so we can reuse the existing parser code. Signed-off-by:
-
David Henningsson authored
commit d5b6b65e upstream. Some HP machines with Realtek codecs have mute LEDs connected to VREF pins. However when these go into runtime suspend, the pin powers down and its pin control is disabled, thus disabling the LED too. This patch fixes that issue by making sure that the pin stays in D0 with correct pin control. BugLink: https://bugs.launchpad.net/bugs/1248465Tested-by:
Franz Hsieh <franz.hsieh@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit 24eff328 upstream. BIOS on Acer TravelMate 6293 doesn't set up the SPDIF output pin correctly as default, so enable it via a fixup entry. Reported-and-tested-by:
Hagen Heiduck <heiduck.suse@fmail.postpro.net> Signed-off-by:
-
Kailang Yang authored
commit 1d04c9de upstream. It's just another variant of ALC269 & co. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
-
Takashi Iwai authored
commit 092f9cd1 upstream. msnd_pinnacle.c is used for both snd-msnd-pinnacle and snd-msnd-classic drivers, and both should have different driver names. Using the same driver name results in the sysfs warning for duplicated entries like kobject: 'msnd-pinnacle.7' (cec33408): kobject_release, parent (null) (delayed) kobject: 'msnd-pinnacle' (cecd4980): kobject_release, parent cf3ad9b0 (delayed) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x7d/0xa0() sysfs: cannot create duplicate filename '/bus/isa/drivers/msnd-pinnacle' ...... Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Vinod Koul authored
commit f44f2a54 upstream. The drain and drain_notify callback were blocked by low level driver until the draining was complete. Due to this being invoked with big fat mutex held, others ops like reading timestamp, calling pause, drop were blocked. So to fix this we add a new snd_compr_drain_notify() API. This would be required to be invoked by low level driver when drain or partial drain has been completed by the DSP. Thus we make the drain and partial_drain callback as non blocking and driver returns immediately after notifying DSP. The waiting is done while releasing the lock so that other ops can go ahead. [ The commit 917f4b5c was wrongly applied from the preliminary patch. This commit corrects to the final version. Sorry for inconvenience! -- tiwai ] Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Vinod Koul authored
commit 917f4b5c upstream. The drain and drain_notify callback were blocked by low level driver untill the draining was complete. Due to this being invoked with big fat mutex held, others ops like reading timestamp, calling pause, drop were blocked. So to fix this we add a new snd_compr_drain_notify() API. This would be required to be invoked by low level driver when drain or partial drain has been completed by the DSP. Thus we make the drain and partial_drain callback as non blocking and driver returns immediately after notifying DSP. The waiting is done while relasing the lock so that other ops can go ahead. Signed-off-by:
-
Takashi Iwai authored
commit 9b389a8a upstream. The probe code of snd-usb-6fire driver overrides the devices[] pointer wrongly without checking whether it's already occupied or not. This would screw up the device disconnection later. Spotted by coverity CID 141423. Signed-off-by:
-
Kees Cook authored
commit d049f74f upstream. The get_dumpable() return value is not boolean. Most users of the function actually want to be testing for non-SUID_DUMP_USER(1) rather than SUID_DUMP_DISABLE(0). The SUID_DUMP_ROOT(2) is also considered a protected state. Almost all places did this correctly, excepting the two places fixed in this patch. Wrong logic: if (dumpable == SUID_DUMP_DISABLE) { /* be protective */ } or if (dumpable == 0) { /* be protective */ } or if (!dumpable) { /* be protective */ } Correct logic: if (dumpable != SUID_DUMP_USER) { /* be protective */ } or if (dumpable != 1) { /* be protective */ } Without this patch, if the system had set the sysctl fs/suid_dumpable=2, a user was able to ptrace attach to processes that had dropped privileges to that user. (This may have been partially mitigated if Yama was enabled.) The macros have been moved into the file that declares get/set_dumpable(), which means things like the ia64 code can see them too. CVE-2013-2929 Reported-by:
Vasily Kulikov <segoon@openwall.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mimi Zohar authored
commit 08de59eb upstream. This reverts commit 4c2c3927. Everything in the initramfs should be measured and appraised, but until the initramfs has extended attribute support, at least measured. Signed-off-by:
Mimi Zohar <zohar@us.ibm.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 3d8bfe14 upstream. Since: commit 36323f81 Author: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Date: Mon Jul 23 21:33:42 2012 +0200 mac80211: move TX station pointer and restructure TX we do not pass sta pointer to rt2x00queue_create_tx_descriptor_ht(), hence we do not correctly set station WCID and AMPDU density parameters. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Gabor Juhos authored
commit 0beb1bbf upstream. In commit 3d81535e (rt2800: 5592: add chip specific vgc calculations) the rt2800_link_tuner function has been modified to adjust VGC level for the RT5592 chipset. On the RT5592 chipset, the VGC level must be adjusted only if rssi is greater than -65. However the current code adjusts the VGC value by 0x10 regardless of the actual chipset if the rssi value is between -80 and -65. Fix the broken behaviour by reordering the if-else statements. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Acked-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
Stanislaw Gruszka authored
commit 5671ab05 upstream. Fix random kernel panic with below messages when remove dongle. [ 2212.355447] BUG: unable to handle kernel NULL pointer dereference at 0000000000000250 [ 2212.355527] IP: [<ffffffffa02667f2>] rt2x00usb_kick_tx_entry+0x12/0x160 [rt2x00usb] [ 2212.355599] PGD 0 [ 2212.355626] Oops: 0000 [#1] SMP [ 2212.355664] Modules linked in: rt2800usb rt2x00usb rt2800lib crc_ccitt rt2x00lib mac80211 cfg80211 tun arc4 fuse rfcomm bnep snd_hda_codec_realtek snd_hda_intel snd_hda_codec btusb uvcvideo bluetooth snd_hwdep x86_pkg_temp_thermal snd_seq coretemp aesni_intel aes_x86_64 snd_seq_device glue_helper snd_pcm ablk_helper videobuf2_vmalloc sdhci_pci videobuf2_memops videobuf2_core sdhci videodev mmc_core serio_raw snd_page_alloc microcode i2c_i801 snd_timer hid_multitouch thinkpad_acpi lpc_ich mfd_core snd tpm_tis wmi tpm tpm_bios soundcore acpi_cpufreq i915 i2c_algo_bit drm_kms_helper drm i2c_core video [last unloaded: cfg80211] [ 2212.356224] CPU: 0 PID: 34 Comm: khubd Not tainted 3.12.0-rc3-wl+ #3 [ 2212.356268] Hardware name: LENOVO 3444CUU/3444CUU, BIOS G6ET93WW (2.53 ) 02/04/2013 [ 2212.356319] task: ffff880212f687c0 ti: ffff880212f66000 task.ti: ffff880212f66000 [ 2212.356392] RIP: 0010:[<ffffffffa02667f2>] [<ffffffffa02667f2>] rt2x00usb_kick_tx_entry+0x12/0x160 [rt2x00usb] [ 2212.356481] RSP: 0018:ffff880212f67750 EFLAGS: 00010202 [ 2212.356519] RAX: 000000000000000c RBX: 000000000000000c RCX: 0000000000000293 [ 2212.356568] RDX: ffff8801f4dc219a RSI: 0000000000000000 RDI: 0000000000000240 [ 2212.356617] RBP: ffff880212f67778 R08: ffffffffa02667e0 R09: 0000000000000002 [ 2212.356665] R10: 0001f95254ab4b40 R11: ffff880212f675be R12: ffff8801f4dc2150 [ 2212.356712] R13: 0000000000000000 R14: ffffffffa02667e0 R15: 000000000000000d [ 2212.356761] FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 [ 2212.356813] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2212.356852] CR2: 0000000000000250 CR3: 0000000001a0c000 CR4: 00000000001407f0 [ 2212.356899] Stack: [ 2212.356917] 000000000000000c ffff8801f4dc2150 0000000000000000 ffffffffa02667e0 [ 2212.356980] 000000000000000d ffff880212f677b8 ffffffffa03a31ad ffff8801f4dc219a [ 2212.357038] ffff8801f4dc2150 0000000000000000 ffff8800b93217a0 ffff8801f49bc800 [ 2212.357099] Call Trace: [ 2212.357122] [<ffffffffa02667e0>] ? rt2x00usb_interrupt_txdone+0x90/0x90 [rt2x00usb] [ 2212.357174] [<ffffffffa03a31ad>] rt2x00queue_for_each_entry+0xed/0x170 [rt2x00lib] [ 2212.357244] [<ffffffffa026701c>] rt2x00usb_kick_queue+0x5c/0x60 [rt2x00usb] [ 2212.357314] [<ffffffffa03a3682>] rt2x00queue_flush_queue+0x62/0xa0 [rt2x00lib] [ 2212.357386] [<ffffffffa03a2930>] rt2x00mac_flush+0x30/0x70 [rt2x00lib] [ 2212.357470] [<ffffffffa04edded>] ieee80211_flush_queues+0xbd/0x140 [mac80211] [ 2212.357555] [<ffffffffa0502e52>] ieee80211_set_disassoc+0x2d2/0x3d0 [mac80211] [ 2212.357645] [<ffffffffa0506da3>] ieee80211_mgd_deauth+0x1d3/0x240 [mac80211] [ 2212.357718] [<ffffffff8108b17c>] ? try_to_wake_up+0xec/0x290 [ 2212.357788] [<ffffffffa04dbd18>] ieee80211_deauth+0x18/0x20 [mac80211] [ 2212.357872] [<ffffffffa0418ddc>] cfg80211_mlme_deauth+0x9c/0x140 [cfg80211] [ 2212.357913] [<ffffffffa041907c>] cfg80211_mlme_down+0x5c/0x60 [cfg80211] [ 2212.357962] [<ffffffffa041cd18>] cfg80211_disconnect+0x188/0x1a0 [cfg80211] [ 2212.358014] [<ffffffffa04013bc>] ? __cfg80211_stop_sched_scan+0x1c/0x130 [cfg80211] [ 2212.358067] [<ffffffffa03f8954>] cfg80211_leave+0xc4/0xe0 [cfg80211] [ 2212.358124] [<ffffffffa03f8d1b>] cfg80211_netdev_notifier_call+0x3ab/0x5e0 [cfg80211] [ 2212.358177] [<ffffffff815140f8>] ? inetdev_event+0x38/0x510 [ 2212.358217] [<ffffffff81085a94>] ? __wake_up+0x44/0x50 [ 2212.358254] [<ffffffff8155995c>] notifier_call_chain+0x4c/0x70 [ 2212.358293] [<ffffffff81081156>] raw_notifier_call_chain+0x16/0x20 [ 2212.358361] [<ffffffff814b6dd5>] call_netdevice_notifiers_info+0x35/0x60 [ 2212.358429] [<ffffffff814b6ec9>] __dev_close_many+0x49/0xd0 [ 2212.358487] [<ffffffff814b7028>] dev_close_many+0x88/0x100 [ 2212.358546] [<ffffffff814b8150>] rollback_registered_many+0xb0/0x220 [ 2212.358612] [<ffffffff814b8319>] unregister_netdevice_many+0x19/0x60 [ 2212.358694] [<ffffffffa04d8eb2>] ieee80211_remove_interfaces+0x112/0x190 [mac80211] [ 2212.358791] [<ffffffffa04c585f>] ieee80211_unregister_hw+0x4f/0x100 [mac80211] [ 2212.361994] [<ffffffffa03a1221>] rt2x00lib_remove_dev+0x161/0x1a0 [rt2x00lib] [ 2212.365240] [<ffffffffa0266e2e>] rt2x00usb_disconnect+0x2e/0x70 [rt2x00usb] [ 2212.368470] [<ffffffff81419ce4>] usb_unbind_interface+0x64/0x1c0 [ 2212.371734] [<ffffffff813b446f>] __device_release_driver+0x7f/0xf0 [ 2212.374999] [<ffffffff813b4503>] device_release_driver+0x23/0x30 [ 2212.378131] [<ffffffff813b3c98>] bus_remove_device+0x108/0x180 [ 2212.381358] [<ffffffff813b0565>] device_del+0x135/0x1d0 [ 2212.384454] [<ffffffff81417760>] usb_disable_device+0xb0/0x270 [ 2212.387451] [<ffffffff8140d9cd>] usb_disconnect+0xad/0x1d0 [ 2212.390294] [<ffffffff8140f6cd>] hub_thread+0x63d/0x1660 [ 2212.393034] [<ffffffff8107c860>] ? wake_up_atomic_t+0x30/0x30 [ 2212.395728] [<ffffffff8140f090>] ? hub_port_debounce+0x130/0x130 [ 2212.398412] [<ffffffff8107baa0>] kthread+0xc0/0xd0 [ 2212.401058] [<ffffffff8107b9e0>] ? insert_kthread_work+0x40/0x40 [ 2212.403639] [<ffffffff8155de3c>] ret_from_fork+0x7c/0xb0 [ 2212.406193] [<ffffffff8107b9e0>] ? insert_kthread_work+0x40/0x40 [ 2212.408732] Code: 24 58 08 00 00 bf 80 00 00 00 e8 3a c3 e0 e0 5b 41 5c 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 <48> 8b 47 10 48 89 fb 4c 8b 6f 28 4c 8b 20 49 8b 04 24 4c 8b 30 [ 2212.414671] RIP [<ffffffffa02667f2>] rt2x00usb_kick_tx_entry+0x12/0x160 [rt2x00usb] [ 2212.417646] RSP <ffff880212f67750> [ 2212.420547] CR2: 0000000000000250 [ 2212.441024] ---[ end trace 5442918f33832bce ]--- Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Felix Fietkau authored
commit b4089d6d upstream. Commit "rt2x00: fix HT TX descriptor settings regression" assumes that the control parameter to rt2x00mac_tx is always non-NULL. There is an internal call in rt2x00lib_bc_buffer_iter where NULL is passed. Fix the resulting crash by adding an initialized dummy on-stack ieee80211_tx_control struct. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Acked-by:
-
Rafael J. Wysocki authored
commit 176a88d7 upstream. According to the ACPI spec (5.0, Section 6.3.5), the "Device insertion in progress (pending)" (0x80) _OST status code is reserved for the "Insertion Processing" (0x200) source event which is "a result of an OSPM action". Specifically, it is not a notification, so that status code should not be used during notification processing, which unfortunately is done by acpi_scan_bus_device_check(). For this reason, drop the ACPI_OST_SC_INSERT_IN_PROGRESS _OST status evaluation from there (it was a mistake to put it in there in the first place). Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 2441191a upstream. It is required to do get_device() on the struct acpi_device in question before passing it to acpi_bus_hot_remove_device() through acpi_os_hotplug_execute(), because acpi_bus_hot_remove_device() calls acpi_scan_hot_remove() that does put_device() on that object. The ACPI PCI root removal routine, handle_root_bridge_removal(), doesn't do that, which may lead to premature freeing of the device object or to executing put_device() on an object that has been freed already. Fix this problem by making handle_root_bridge_removal() use get_device() as appropriate. Signed-off-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
-
