- 13 Dec, 2017 1 commit
-
-
Simon Horman authored
Sort root sub-nodes alphabetically for allow for easier maintenance of this file. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
- 11 Dec, 2017 2 commits
-
-
Geert Uytterhoeven authored
Describe the GPIO used to reset the Ethernet PHY for EthernetAVB. This allows the driver to reset the PHY during probe and after system resume. On ULCB, the enable pin of the regulator providing PHY power is always pulled high, but the driver may still need to reset the PHY if this wasn't done by the bootloader before. Inspired by patches in the BSP for the individual Salvator-X/XS boards by Kazuya Mizuguchi. Signed-off-by:
-
Geert Uytterhoeven authored
Describe the GPIO used to reset the Ethernet PHY for EthernetAVB. This allows the driver to reset the PHY during probe and after system resume. This fixes Ethernet operation after resume from s2ram on Salvator-XS, where the enable pin of the regulator providing PHY power is connected to PRESETn, and PSCI powers down the SoC during system suspend. On Salvator-X, the enable pin is always pulled high, but the driver may still need to reset the PHY if this wasn't done by the bootloader before. Inspired by patches in the BSP for the individual Salvator-X/XS boards by Kazuya Mizuguchi. Signed-off-by:
-
- 07 Dec, 2017 1 commit
-
-
Simon Horman authored
Move pmu_a5[73], timer and thermal-zones nodes from soc node to root node. The nodes that have been moved do not have any register properties and thus shouldn't be placed on the bus. This problem is flagged by the compiler as follows: $ make ... DTC arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property DTC arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property DTC arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property DTC arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property DTC arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property DTC arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property DTC arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a57 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property Signed-off-by:
-
- 05 Dec, 2017 2 commits
-
-
Sergei Shtylyov authored
Now that the commit 833bdb47 ("dt-bindings: power: add R8A77970 SYSC power domain definitions") has hit Linus' tree, we can replace the bare numbers (we had to use to avoid a cross tree dependency) with these macro definitions... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
-
Sergei Shtylyov authored
Now that the commit ecadea00 ("dt-bindings: clock: Add R8A77970 CPG core clock definitions") has hit Linus' tree, we can replace the bare numbers (we had to use to avoid a cross tree dependency) with these macro definitions... Signed-off-by:
-
- 04 Dec, 2017 2 commits
-
-
Sergei Shtylyov authored
Define the V3M Starter Kit board dependent part of the EtherAVB device node. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by:
Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Add the initial device tree for the V3M Starter Kit board. The board has 1 debug serial port (SCIF0); include support for it, so that the serial console can work. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by:
-
- 28 Nov, 2017 32 commits
-
-
Simon Horman authored
Add IPMMU-RT to the Ethernet-AVB device node. Based on work by Magnus Damm for the r8a7795. Signed-off-by:
-
Simon Horman authored
Add r8a77995 IPMMU nodes and keep all disabled by default. Based on work for the r8a7795 and r8a7796 by Magnus Damm Signed-off-by:
-
Simon Horman authored
Enable the r8a77970 device nodes for IPMMU-DS1, IPMMU-RT and the shared IPMMU-MM device. Based on work for the r8a7796 by Magnus Damm. Signed-off-by:
-
Simon Horman authored
Add IPMMU-RT to the Ethernet-AVB device node. Based on work by Magnus Damm for the r8a7795. Signed-off-by:
-
Simon Horman authored
Hook up r8a77970 DMAC nodes to the IPMMU. In particular SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1. Based on work for the r8a7796 by Magnus Damm. Signed-off-by:
-
Simon Horman authored
Add r8a77970 IPMMU nodes and keep all disabled by default. Based on work for the r8a7796 by Magnus Damm Signed-off-by:
-
Ulrich Hecht authored
Tested on Draak. Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by:
-
Simon Horman authored
Sort includes used in r8a77970 DTS to improve maintainability and for consistency with other R-Car DTS files. Signed-off-by:
-
Takeshi Kihara authored
This patch changes the number of GPIO bank 1 ports to 29 because GP-1-28 port pin of R8A7795 ES2.0 SoC support was added. Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> Fixes: 291e0c49 ("arm64: dts: r8a7795: Add support for R-Car H3 ES2.0") [geert: Keep 28 GPIOs on H3 ES1.x after r8a7795.dtsi sharing] Signed-off-by:
-
Ulrich Hecht authored
Adds CAN FD controller node for r8a77995. Based on a patch for r8a7796 by Chris Paterson. Signed-off-by:
-
Ulrich Hecht authored
Adds CAN controller nodes for r8a77995. Based on a patch for r8a7796 by Chris Paterson. Signed-off-by:
-
Ulrich Hecht authored
Adds external CAN clock node for r8a77995. This clock can be used as fCAN clock of CAN and CAN FD controller. Based on a patch for r8a7796 by Chris Paterson. Signed-off-by:
-
Geert Uytterhoeven authored
Document clearly which SoC this DTS applies to, to distinguish from Salvator-XS boards equipped with other SoCs. Signed-off-by:
-
Geert Uytterhoeven authored
Document clearly which SoC this DTS applies to, to distinguish from Salvator-X boards equipped with other SoCs. Signed-off-by:
-
Geert Uytterhoeven authored
Document clearly which SoC this DTS applies to, to distinguish from Salvator-X boards equipped with other SoCs. Signed-off-by:
-
Geert Uytterhoeven authored
Document clearly which SoC this DTS applies to, to distinguish from Salvator-X boards equipped with other SoCs. Signed-off-by:
-
Geert Uytterhoeven authored
Add a device node for the ROHM BD9571MWV PMIC. This was based on the example in the DT binding documentation, but using IRQ0 instead of a GPIO interrupt, as that matches the schematics, and because INTC-EX is a simpler block. Signed-off-by:
-
Magnus Damm authored
Enable the r8a7795 device nodes for IPMMU-VI0, IPMMU-VP1, IPMMU-DS0, IPMMU-DS1 and the shared IPMMU-MM device. Signed-off-by:
Magnus Damm <damm+renesas@opensource.se> Signed-off-by:
-
Magnus Damm authored
Enable the r8a7795 ES1.x device node for IPMMU-MP1. Signed-off-by:
-
Magnus Damm authored
Add IPMMU-HC to the SATA device node. Signed-off-by:
-
Magnus Damm authored
Add IPMMU-DS0 to the Ethernet-AVB device node. Signed-off-by:
-
Magnus Damm authored
Hook up the FCPVI devices to allow use of VSPI with IPMMU-VP. Signed-off-by:
-
Magnus Damm authored
Hook up the FCPVI devices to allow use of VSPI with IPMMU-VP0 and IPMMU-VP1. Signed-off-by:
-
Magnus Damm authored
Hook up the FCPVB devices to allow use of VSPBC/VSPBD with IPMMU-VP0 and IPMMU-VP1. Signed-off-by:
-
Magnus Damm authored
Hook up the FCPF devices to allow use of FDP1 with IPMMU-VP0. Signed-off-by:
-
Magnus Damm authored
Hook up the FCPF devices to allow use of FDP1 with IPMMU-VP. Signed-off-by:
-
Magnus Damm authored
Hook up the FCPVD devices to allow use of the VSP and DU together with IPMMU-VI0. Signed-off-by:
-
Magnus Damm authored
Hook up the FCPVD devices to allow use of the VSP and DU together with IPMMU-VI1 and IPMMU-VI1. Signed-off-by:
-
Magnus Damm authored
Hook up r8a7795 ES2.0 Audio-DMAC nodes to the IPMMU-MP0. Hook up r8a7795 ES1.x Audio-DMAC nodes to the IPMMU-MP1. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Magnus Damm authored
Hook up r8a7795 SYS-DMAC nodes to the IPMMUs. In particular SYS-DMAC0 gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1. Signed-off-by:
-
Magnus Damm authored
Add r8a7795 ES1.x IPMMU nodes and keep all disabled by default. This is a follow-up to a patch that adds IPMMU device nodes that are common to r8a7795 ES1.x and ES2.0 Power domains are omitted as they appear to be undocumented. Signed-off-by:
-
Magnus Damm authored
Add r8a7795 IPMMU nodes and keep all disabled by default. This includes all IPMMU devices for r8a7795 ES2.0. Those not present in r8a7795 ES1.x are removed from the DT for those SoCs using delete-node. A follow-up patch will add IPMMU devices to ES1.x which are not also present in ES2.0. Signed-off-by:
-
