- 19 Feb, 2022 8 commits
-
-
Jeremy Kerr authored
This change adds some basic sanity checks for the source and dest headers of packets on initial receive. Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jeremy Kerr authored
Currently, we have mctp_address_ok(), which checks if an EID is in the "valid" range of 8-254 inclusive. However, 0 and 255 may also be valid addresses, depending on context. 0 is the NULL EID, which may be set when physical addressing is used. 255 is valid as a destination address for broadcasts. This change renames mctp_address_ok to mctp_address_unicast, and adds similar helpers for broadcast and null EIDs, which will be used in an upcoming commit. Signed-off-by:
-
Jacques de Laval authored
This patch adds a new protocol attribute to IPv4 and IPv6 addresses. Inspiration was taken from the protocol attribute of routes. User space applications like iproute2 can set/get the protocol with the Netlink API. The attribute is stored as an 8-bit unsigned integer. The protocol attribute is set by kernel for these categories: - IPv4 and IPv6 loopback addresses - IPv6 addresses generated from router announcements - IPv6 link local addresses User space may pass custom protocols, not defined by the kernel. Grouping addresses on their origin is useful in scenarios where you want to distinguish between addresses based on who added them, e.g. kernel vs. user space. Tagging addresses with a string label is an existing feature that could be used as a solution. Unfortunately the max length of a label is 15 characters, and for compatibility reasons the label must be prefixed with the name of the device followed by a colon. Since device names also have a max length of 15 characters, only -1 characters is guaranteed to be available for any origin tag, which is not that much. A reference implementation of user space setting and getting protocols is available for iproute2: https://github.com/westermo/iproute2/commit/9a6ea18bd79f47f293e5edc7780f315ea42ff540Signed-off-by:
Jacques de Laval <Jacques.De.Laval@westermo.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220217150202.80802-1-Jacques.De.Laval@westermo.comSigned-off-by:
-
Jakub Kicinski authored
Shannon Nelson says: ==================== ionic: driver updates These are a couple of checkpatch cleanup patches, a bug fix, and something to alleviate memory pressure in tight places. ==================== Link: https://lore.kernel.org/r/20220217220252.52293-1-snelson@pensando.ioSigned-off-by:
-
Shannon Nelson authored
Fix up some checkpatch complaints that have crept in: doubled words words, mispellled words, doubled lines. Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Replace strlcpy with strscpy to clean up a checkpatch complaint. Signed-off-by:
-
Brett Creeley authored
Use vzalloc for per-queue info structs that don't need any DMA mapping to help relieve memory pressure found when used in our limited SOC environment. Signed-off-by:
Brett Creeley <brett@pensando.io> Signed-off-by:
-
Shannon Nelson authored
In some graceful updates that get initially triggered by the RESET event, especially with older firmware, the fw_generation bits don't change but the fw_status is seen to go to 0 then back to 1. However, the driver didn't perform the restart, remained waiting for fw_generation to change, and got left in limbo. This is because the clearing of idev->fw_status_ready to 0 didn't happen correctly as it was buried in the transition trigger: since the transition down was triggered not here but in the RESET event handler, the clear to 0 didn't happen, so the transition back to 1 wasn't detected. Fix this particular case by bringing the setting of idev->fw_status_ready back out to where it was before. Fixes: 398d1e37 ("ionic: add FW_STOPPING state") Signed-off-by:
-
- 18 Feb, 2022 27 commits
-
-
Eric Dumazet authored
If the list of devices has N elements, netdev_wait_allrefs_any() is called N times, and linkwatch_forget_dev() is called N*(N-1)/2 times. Fix this by calling linkwatch_forget_dev() only once per device. Fixes: faab39f6 ("net: allow out-of-order netdev unregistration") Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220218065430.2613262-1-eric.dumazet@gmail.comSigned-off-by:
-
Eric Dumazet authored
IPv6 has this hack changing sk->sk_prot when an IPv6 socket is 'converted' to an IPv4 one with IPV6_ADDRFORM option. This operation is only performed for TCP and UDP, knowing their 'struct proto' for the two network families are populated in the same way, and can not disappear while a reader might use and dereference sk->sk_prot. If we think about it all reads of sk->sk_prot while either socket lock or RTNL is not acquired should be using READ_ONCE(). Also note that other layers like MPTCP, XFRM, CHELSIO_TLS also write over sk->sk_prot. BUG: KCSAN: data-race in inet6_recvmsg / ipv6_setsockopt write to 0xffff8881386f7aa8 of 8 bytes by task 26932 on cpu 0: do_ipv6_setsockopt net/ipv6/ipv6_sockglue.c:492 [inline] ipv6_setsockopt+0x3758/0x3910 net/ipv6/ipv6_sockglue.c:1019 udpv6_setsockopt+0x85/0x90 net/ipv6/udp.c:1649 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3489 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff8881386f7aa8 of 8 bytes by task 26911 on cpu 1: inet6_recvmsg+0x7a/0x210 net/ipv6/af_inet6.c:659 ____sys_recvmsg+0x16c/0x320 ___sys_recvmsg net/socket.c:2674 [inline] do_recvmmsg+0x3f5/0xae0 net/socket.c:2768 __sys_recvmmsg net/socket.c:2847 [inline] __do_sys_recvmmsg net/socket.c:2870 [inline] __se_sys_recvmmsg net/socket.c:2863 [inline] __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2863 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffffffff85e0e980 -> 0xffffffff85e01580 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 26911 Comm: syz-executor.3 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e515-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cédric Le Goater authored
There were a fair amount of changes to workaround a firmware bug leaving a pending interrupt after migration of the ibmvnic device : commit 2df5c60e ("net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode") commit 284f87d2 ("Revert "net/ibmvnic: Fix EOI when running in XIVE mode"") commit 11d49ce9 ("net/ibmvnic: Fix EOI when running in XIVE mode.") commit f23e0643 ("ibmvnic: Clear pending interrupt after device reset") Here is the final one taking into account the XIVE interrupt mode. Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Cc: Dany Madden <drt@linux.ibm.com> Signed-off-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
jeffreyji authored
skb is ignored if team port is disabled. We want the skb to be delivered if it's an link layer packet. Issue is already fixed for bonding in commit b89f04c6 ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") changelog: v2: change LLDP -> link layer in comments/commit descrip, comment format Signed-off-by:
jeffreyji <jeffreyji@google.com> Signed-off-by:
-
David S. Miller authored
Russell King says: ==================== net: dsa: qca8k: convert to phylink_pcs and mark as non-legacy This series adds support into DSA for the mac_select_pcs method, and converts qca8k to make use of this, eventually marking qca8k as non- legacy. Patch 1 adds DSA support for mac_select_pcs. Patch 2 and patch 3 moves code around in qca8k to make patch 4 more readable. Patch 4 does a simple conversion to phylink_pcs. Patch 5 moves the serdes configuration to phylink_pcs. Patch 6 marks qca8k as non-legacy. v2: fix dsa_phylink_mac_select_pcs() formatting and double-blank line in patch 5 ==================== Signed-off-by: -
Russell King (Oracle) authored
The qca8k driver does not make use of the speed, duplex, pause or advertisement in its phylink_mac_config() implementation, so it can be marked as a non-legacy driver. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King (Oracle) authored
Move the PCS configuration to qca8k_pcs_config(). Signed-off-by:
-
Russell King (Oracle) authored
Convert the qca8k driver to use the phylink_pcs support to talk to the SGMII PCS. Signed-off-by:
-
Russell King (Oracle) authored
Move qca8k_phylink_mac_link_state() to separate the code movement from code changes. Signed-off-by:
-
Russell King (Oracle) authored
Move qca8k_setup() to be later in the file to avoid needing prototypes for called functions. Signed-off-by:
-
Russell King (Oracle) authored
Add DSA support for the phylink mac_select_pcs() method so DSA drivers can return provide phylink with the appropriate PCS for the PHY interface mode. Signed-off-by:
-
Tom Rix authored
Remove the second 'the'. Replacements: endiannes to endianness areconnected to are connected Mamagement to Management undoccumented to undocumented Xilink to Xilinx strucutre to structure Change kernel-doc comment style to c style for /* Management ... Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Gal Pressman authored
Following the cited commit, sparse started complaining about: ../include/net/gro.h:58:1: warning: directive in macro's argument list ../include/net/gro.h:59:1: warning: directive in macro's argument list Fix that by moving the defines out of the struct_group() macro. Fixes: de5a1f3c ("net: gro: minor optimization for dev_gro_receive()") Reviewed-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
Gal Pressman <gal@nvidia.com> Acked-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Xu Wang authored
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Acked-by:
Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20220216075155.940-1-vulab@iscas.ac.cnSigned-off-by:
-
Vladimir Oltean authored
Introduced in commit cf963573 ("net: dsa: Allow providing PHY statistics from CPU port"), it appears these were never used. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220216193726.2926320-1-vladimir.oltean@nxp.comSigned-off-by:
-
Eric Dumazet authored
prot->memory_allocated should only be set if prot->sysctl_mem is also set. This is a followup of commit 25206111 ("crypto: af_alg - get rid of alg_memory_allocated"). Signed-off-by:
-
Christophe JAILLET authored
XTE_MAX_JUMBO_FRAME_SIZE is over 9000 bytes and the default value for 'rx_bd_num' is RX_BD_NUM_DEFAULT (i.e. 1024) So this loop allocates more than 9 Mo of memory. Previous memory allocations in this function already use GFP_KERNEL, so use __netdev_alloc_skb_ip_align() and an explicit GFP_KERNEL instead of a implicit GFP_ATOMIC. This gives more opportunities of successful allocation. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/694abd65418b2b3974106a82d758e3474c65ae8f.1645042560.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
NIXGE_MAX_JUMBO_FRAME_SIZE is over 9000 bytes and RX_BD_NUM 128. So this loop allocates more than 1 Mo of memory. Previous memory allocations in this function already use GFP_KERNEL, so use __netdev_alloc_skb_ip_align() and an explicit GFP_KERNEL instead of a implicit GFP_ATOMIC. This gives more opportunities of successful allocation. Signed-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Selftest fine-tuning and cleanup Patch 1 adjusts the mptcp selftest timeout to account for slow machines running debug builds. Patch 2 simplifies one test function. Patches 3-6 do some cleanup, like deleting unused variables and avoiding extra work when only printing usage information. Patch 7 improves the checksum tests by utilizing existing checksum MIBs. ==================== Link: https://lore.kernel.org/r/20220218030311.367536-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Geliang Tang authored
This patch added the data checksum error mib counters check for the script mptcp_connect.sh when the data checksum is enabled. In do_transfer(), got the mib counters twice, before and after running the mptcp_connect commands. The latter minus the former is the actual number of the data checksum mib counter. The output looks like this: ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ] ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ] server got 1 data checksum error[s] Fixes: 94d66ba1 ("selftests: mptcp: enable checksum in mptcp_connect.sh") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Matthieu Baerts authored
To allow showing the 'help' menu even if these tools are not available. While at it, also avoid launching the command then checking $?. Instead, the check is directly done in the 'if'. Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Matthieu Baerts authored
These tmp files will only be created when a test will be launched. This avoid 'dd' output when '-h' is used for example. While at it, also avoid creating netns that will be removed when starting the first test. Signed-off-by:
-
Matthieu Baerts authored
Shellcheck found that these variables were set but never used. Note that rndh is no longer prefixed with '0-' but it doesn't change anything. Signed-off-by:
-
Matthieu Baerts authored
With an error if it is an unknown option. Signed-off-by:
-
Geliang Tang authored
This patch simplified pm_nl_change_endpoint(), using id-based address lookups only. And dropped the fragile way of parsing 'addr' and 'id' from the output of pm_nl_show_endpoints(). Signed-off-by:
-
Matthieu Baerts authored
With the increase number of tests, one CI instance, using a debug kernel config and not recent hardware, takes around 10 minutes to execute the slowest MPTCP test: mptcp_join.sh. Even if most CIs don't take that long to execute these tests -- typically max 10 minutes to run all selftests -- it will help some of them if the timeout is increased. The timeout could be disabled but it is always good to have an extra safeguard, just in case. Please note that on slow public CIs with kernel debug settings, it has been observed it can easily take up to 45 minutes to execute all tests in this very slow environment with other jobs running in parallel. The slowest test, mptcp_join.sh takes ~30 minutes in this case. In such environments, the selftests timeout set in the 'settings' file is disabled because this environment is known as being exceptionnally slow. It has been decided not to take such exceptional environments into account and set the timeout to 20min. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== bpf-next 2022-02-17 We've added 29 non-merge commits during the last 8 day(s) which contain a total of 34 files changed, 1502 insertions(+), 524 deletions(-). The main changes are: 1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/) 2) Prepare light skeleton to be used in both kernel module and user space and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov. 3) Rework bpftool's versioning scheme and align with libbpf's version number; also add linked libbpf version info to "bpftool version", from Quentin Monnet. 4) Add minimal C++ specific additions to bpftool's skeleton codegen to facilitate use of C skeletons in C++ applications, from Andrii Nakryiko. 5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows desc->imm and reject the BPF program if the case, from Hou Tao. 6) Fix libbpf to use a dynamically allocated buffer for netlink messages to avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen. 7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu. 8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun. 9) Fix bpftool pretty print handling on dumping map keys/values when no BTF is available, from Jiri Olsa and Yinjun Zhang. 10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits) bpf: bpf_prog_pack: Set proper size before freeing ro_header selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails selftests/bpf: Fix vmtest.sh to launch smp vm. libbpf: Fix memleak in libbpf_netlink_recv() bpftool: Fix C++ additions to skeleton bpftool: Fix pretty print dump for maps without BTF loaded selftests/bpf: Test "bpftool gen min_core_btf" bpftool: Gen min_core_btf explanation and examples bpftool: Implement btfgen_get_btf() bpftool: Implement "gen min_core_btf" logic bpftool: Add gen min_core_btf command libbpf: Expose bpf_core_{add,free}_cands() to bpftool libbpf: Split bpf_core_apply_relo() bpf: Reject kfunc calls that overflow insn->imm selftests/bpf: Add Skeleton templated wrapper as an example bpftool: Add C++-specific open/load/etc skeleton wrappers selftests/bpf: Fix GCC11 compiler warnings in -O2 mode bpftool: Fix the error when lookup in no-btf maps libbpf: Use dynamically allocated buffer when receiving netlink messages libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0 ... ==================== Link: https://lore.kernel.org/r/20220217232027.29831-1-daniel@iogearbox.netSigned-off-by:
-
- 17 Feb, 2022 5 commits
-
-
Song Liu authored
bpf_prog_pack_free() uses header->size to decide whether the header should be freed with module_memfree() or the bpf_prog_pack logic. However, in kvmalloc() failure path of bpf_jit_binary_pack_alloc(), header->size is not set yet. As a result, bpf_prog_pack_free() may treat a slice of a pack as a standalone kvmalloc'd header and call module_memfree() on the whole pack. This in turn causes use-after-free by other users of the pack. Fix this by setting ro_header->size before freeing ro_header. Fixes: 33c98058 ("bpf: Introduce bpf_jit_binary_pack_[alloc|finalize|free]") Reported-by: syzbot+2f649ec6d2eea1495a8f@syzkaller.appspotmail.com Reported-by: syzbot+ecb1e7e51c52f68f7481@syzkaller.appspotmail.com Reported-by: syzbot+87f65c75f4a72db05445@syzkaller.appspotmail.com Signed-off-by:
Song Liu <song@kernel.org> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220217183001.1876034-1-song@kernel.org
-
David S. Miller authored
Yevhen Orlov says: ==================== net: marvell: prestera: add basic routes offloading Add support for blackhole and local routes for Marvell Prestera driver. Subscribe on fib notifications and handle add/del. Add features: - Support route adding. e.g.: "ip route add blackhole 7.7.1.1/24" e.g.: "ip route add local 9.9.9.9 dev sw1p30" - Support "rt_trap", "rt_offload", "rt_offload_failed" flags - Handle case, when route in "local" table overlaps route in "main" table example: ip ro add blackhole 7.7.7.7 ip ro add local 7.7.7.7 dev sw1p30 # blackhole route will be deoffloaded. rt_offload flag disappeared Limitations: - Only "blackhole" and "local" routes supported. "nexthop" routes is TRAP for now and will be implemented soon. - Only "local" and "main" tables supported ==================== Co-developed-by:Taras Chornyi <tchornyi@marvell.com> Signed-off-by:
Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by:
Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by:
-
Yevhen Orlov authored
For now we support only TRAP or DROP, so we can offload only "local" or "blackhole" routes. Nexthop routes is TRAP for now. Will be implemented soon. Co-developed-by:
-
Yevhen Orlov authored
Add new router_hw object "fib_node". For now it support only DROP and TRAP mode. Co-developed-by:
-
Yevhen Orlov authored
Add functions to create/delete lpm entry in hw. prestera_hw_lpm_add() take index of allocated virtual router. Also it takes grp_id, which is index of allocated nexthop group. ABI to create nexthop group will be added soon. Co-developed-by:
-
