Register related irq handler.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Register irq handler.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add interrupt source id macros.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize JPEG RAS structure and add error query interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize VCN RAS structure and add RAS status query function.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Make the code reusable.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

So the code can be reused.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set support flag for VCN/JPEG 4.0.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The patch is enabling mode-1 reset for RAS recovery in fatal error mode.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for RAS table at I2C EEPROM address of 0x40000, since on some
ASICs it is not at 0, but at 0x40000.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Don't assume FRU MCU memory locations for the FRU data fields, or their sizes,
instead read and interpret the IPMI data, as stipulated in the IPMI spec
version 1.0 rev 1.2.

Extract the Product Name, Product Part/Model Number, and the Product Serial
Number by interpreting the IPMI data.

Check the checksums of the stored IPMI data to make sure we don't read and
give corrupted data back the the user.

Eliminate small I2C reads, and instead read the whole Product Info Area in one
go, and then extract the information we're seeking from it.

Eliminates a whole function, making this file smaller.

v2: Clarify changes in the commit message.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set the new correct default FRU MCU I2C address for newer ASICs, so that we
can correctly read the Product Name, Product Part/Model Number and Serial
Number.

On newer ASICs, the FRU MCU was moved to I2C address 0x58.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allow non-standard EEPROM I2C address of 0x58, where the Device Type
Identifier is 1011b, where we form 1011000b = 0x58 I2C address, as on some
ASICs the FRU data lives there.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove unused parameters and cleanup dead code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Clean that up a bit, no functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The basic problem here is that it's not allowed to page fault while
holding the reservation lock.

So it can happen that multiple processes try to validate an userptr
at the same time.

Work around that by putting the HMM range object into the mutex
protected bo list for now.

v2: make sure range is set to NULL in case of an error
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since switching to HMM we always need that because we no longer grab
references to the pages.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Now that we've fixed the issue with using the incorrect topology manager,
we're actually grabbing the topology manager's lock - and consequently
deadlocking. Luckily for us though, there's actually nothing in AMD's DSC
state computation code that really should need this lock. The one exception
is the mutex_lock() in dm_dp_mst_is_port_support_mode(), however we grab no
locks beneath &mgr->lock there so that should be fine to leave be.

Gitlab issue: https://gitlab.freedesktop.org/drm/amd/-/issues/2171Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 8c20a1ed ("drm/amd/display: MST DSC compute fair share")
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This bug hurt me. Basically, it appears that we've been grabbing the
entirely wrong mutex in the MST DSC computation code for amdgpu! While
we've been grabbing:

  amdgpu_dm_connector->mst_mgr

That's zero-initialized memory, because the only connectors we'll ever
actually be doing DSC computations for are MST ports. Which have mst_mgr
zero-initialized, and instead have the correct topology mgr pointer located
at:

  amdgpu_dm_connector->mst_port->mgr;

I'm a bit impressed that until now, this code has managed not to crash
anyone's systems! It does seem to cause a warning in LOCKDEP though:

  [   66.637670] DEBUG_LOCKS_WARN_ON(lock->magic != lock)

This was causing the problems that appeared to have been introduced by:

  commit 4d07b0bc ("drm/display/dp_mst: Move all payload info into the atomic state")

This wasn't actually where they came from though. Presumably, before the
only thing we were doing with the topology mgr pointer was attempting to
grab mst_mgr->lock. Since the above commit however, we grab much more
information from mst_mgr including the atomic MST state and respective
modesetting locks.

This patch also implies that up until now, it's quite likely we could be
susceptible to race conditions when going through the MST topology state
for DSC computations since we technically will not have grabbed any lock
when going through it.

So, let's fix this by adjusting all the respective code paths to look at
the right pointer and skip things that aren't actual MST connectors from a
topology.

Gitlab issue: https://gitlab.freedesktop.org/drm/amd/-/issues/2171Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 8c20a1ed ("drm/amd/display: MST DSC compute fair share")
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Looks like that we're accidentally dropping a pretty important return code
here. For some reason, we just return -EINVAL if we fail to get the MST
topology state. This is wrong: error codes are important and should never
be squashed without being handled, which here seems to have the potential
to cause a deadlock.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Fixes: 8ec04671 ("drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs")
Cc: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It appears that amdgpu makes the mistake of completely ignoring the return
values from the DP MST helpers, and instead just returns a simple
true/false. In this case, it seems to have come back to bite us because as
a result of simply returning false from
compute_mst_dsc_configs_for_state(), amdgpu had no way of telling when a
deadlock happened from these helpers. This could definitely result in some
kernel splats.

V2:
* Address Wayne's comments (fix another bunch of spots where we weren't
  passing down return codes)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 8c20a1ed ("drm/amd/display: MST DSC compute fair share")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Assert on non-OK response from SMU is unnecessary.
It was replaced with respective log message on other asics
in the past with commit:
"drm/amd/display: Removing assert statements for Linux"

[How]
Remove assert and add dbg logging as on other DCNs.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Move the new callback outside of the guard.

Fixes: dc55b106 ("drm/amd/display: Disable phantom OTG after enable for plane disable")
CC: Alvin Lee <Alvin.Lee2@amd.com>
CC: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The state of VRAM is unreliable due to a PCI event like AER, link reset
or DPC.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Re-submitting IBs by the kernel has many problems because pre-
requisite state is not automatically re-created as well. In
other words neither binary semaphores nor things like ring
buffer pointers are in the state they should be when the
hardware starts to work on the IBs again.

Additional to that even after more than 5 years of
developing this feature it is still not stable and we have
massively problems getting the reference counts right.

As discussed with user space developers this behavior is not
helpful in the first place. For graphics and multimedia
workloads it makes much more sense to either completely
re-create the context or at least re-submitting the IBs
from userspace.

For compute use cases re-submitting is also not very
helpful since userspace must rely on the accuracy of
the result.

Because of this we stop this practice and instead just
properly note that the fence submission was canceled. The
only use case we keep the re-submission for now is SRIOV
and function level resets.

v2: as suggested by Sshaoyun stop resubmitting jobs even for SRIOV
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit e6c6338f.

This feature basically re-submits one job after another to
figure out which one was the one causing a hang.

This is obviously incompatible with gang-submit which requires
that multiple jobs run at the same time. It's also absolutely
not helpful to crash the hardware multiple times if a clean
recovery is desired.

For testing and debugging environments we should rather disable
recovery alltogether to be able to inspect the state with a hw
debugger.

Additional to that the sw implementation is clearly buggy and causes
reference count issues for the hardware fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In the PP_OD_EDIT_VDDC_CURVE case the "input_index" variable is capped at
2 but not checked for negative values so it results in an out of bounds
read.  This value comes from the user via sysfs.

Fixes: d5bf2653 ("drm/amd/powerplay: added vega20 overdrive support V3")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in structs ATOM_I2C_VOLTAGE_OBJECT_V3,
ATOM_ASIC_INTERNAL_SS_INFO_V2, ATOM_ASIC_INTERNAL_SS_INFO_V3,
and refactor the rest of the code accordingly.

Important to mention is that doing a build before/after this patch
results in no functional binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The workaround designed for some specific ASICs is wrongly applied
to SMU13 ASICs. That leads to some runpm hang.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable SMU13.0.7 runpm support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable SMU13.0.0 runpm support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Amdgpu_ras_set_error_query_ready is called at the start of
amdgpu_device_gpu_recover to disable query ras error, but the
code behind only enables query ras error in full reset path,
but not in soft reset path, emergency restart path and skip
the hardware reset path.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If we enable virtual display functionality on parts with
no display hardware we can end up trying to check for and
reserve the vbios FB area on devices where it doesn't exist.
Check if display hardware is actually present on the hardware
before trying to reserve the memory.

v2: move the check into common code
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is to resolve a regression, which fails to allocate
VRAM due to no free memory in application, the reason
is we add check of vram_pin_size for memory limit, and
application is pinning the memory for Peerdirect, KFD
should not count it in memory limit. So removing
vram_pin_size will resolve it.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Otherwise, some unexpected PCIE AER errors will be observed
in runtime suspend/resume cycle.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add umc channel index mapping table for umc_v8_10.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

change the vangogh family to use IP discovery path to initialize IP
list, this needs to remove the DID from the PCI ID list to allow the IP
discovery path to set all the IP versions correctly.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use ip versions (10,3,1) to match the GPU after Vangogh switched to use IP
discovery path.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add the missing apu flag for Vangogh when using IP discovery code path
to initialize IPs
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DM maps DRM CRTC degamma to DPP (pre-blending) degamma block, but DCE doesn't
support programmable degamma curve anywhere. Currently, a custom degamma is
accepted by DM but just ignored by DCE driver and degamma correction isn't
actually applied. There is no way to map custom degamma in DCE, therefore, DRM
CRTC degamma property shouldn't be enabled for DCE drivers.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>