- 30 Jul, 2020 1 commit
-
-
Jingle Wu authored
The update firmware flow of ic type 0x15 is same with ic type 0x14. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20200730060526.12439-1-jingle.wu@emc.com.twSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 29 Jul, 2020 2 commits
-
-
Nick Dyer authored
The workaround of reading all messages until an invalid is received is a way of forcing the CHG line high, which means that when using edge-triggered interrupts the interrupt can be acquired. With level-triggered interrupts the workaround is unnecessary. Also, most recent maXTouch chips have a feature called RETRIGEN which, when enabled, reasserts the interrupt line every cycle if there are messages waiting. This also makes the workaround unnecessary. Note: the RETRIGEN feature is only in some firmware versions/chips, it's not valid simply to enable the bit. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> (cherry picked from ndyer/linux/for-upstream commit 1ae4e8281e491b22442cd5acdfca1862555f8ecb) [gdavis: Fix conflicts due to v4.6-rc7 commit eb43335c ("Input: atmel_mxt_ts - use mxt_acquire_irq in mxt_soft_reset").] Signed-off-by: George G. Davis <george_davis@mentor.com> [jiada: reset use_retrigen_workaround at beginning of mxt_check_retrigen() call mxt_check_retrigen() after mxt_acquire_irq() in mxt_initialize() replace white-spaces with tab for MXT_COMMS_RETRIGEN Changed to check if IRQ is level type] Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Link: https://lore.kernel.org/r/20200727151637.23810-1-jiada_wang@mentor.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Pavel Machek authored
Fix non-existing constant in documentation. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Link: https://lore.kernel.org/r/20200724084025.GB31930@amdSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 22 Jul, 2020 4 commits
-
-
Xiongfeng Wang authored
When I cat some module parameters by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/ati_remote2/parameters/mode_mask 0x1froot@syzkaller:~# cat /sys/module/ati_remote2/parameters/channel_mask 0xffffroot@syzkaller:~# Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20200720092148.9320-1-wangxiongfeng2@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Xiongfeng Wang authored
When I cat parameter 'proto' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/psmouse/parameters/proto autoroot@syzkaller:~# Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Sync up with 'for-linus' branch to resolve conflict in Elan touchpad driver.
-
Dmitry Torokhov authored
Bring in update to Elan touchpad driver to support newer touchpads with higher resolution.
-
- 21 Jul, 2020 3 commits
-
-
Randy Dunlap authored
Drop the repeated word "to" in a comment. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200719003131.21050-1-rdunlap@infradead.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingle Wu authored
Newer controllers (identified as "pattern" version 2) send higher resolution reports, with 16-bit X and Y coordinates (previous generations used 12-bit values). These new high resolution reports use report ID of 0x60. SMbus controllers use the same buffer size for both the new and old reports, and because of that high resolution reports no longer carry area of contact data with SMbus. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20200710054116.5529-1-jingle.wu@emc.com.twSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
We do not need to constantly re-query pattern ID, we can instead query it once and then pass to methods that need it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 18 Jul, 2020 7 commits
-
-
Jingle Wu authored
This adds firmware size and page sizes for ic types 0x11, 0x13 and 0x14. IC 0x14 uses 512-byte firmware page size. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingle Wu authored
Newer ICs with IC type value starting with 0x0D and newer bootloader code use 128-byte firmware pages. Their bootloader also needs to be switched to proper mode before executing firmware update. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingle Wu authored
Prepare driver for devices that use different sizes of firmware pages. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingle Wu authored
Older controllers in bootloader mode need a different command to retrieve the IAP version. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20200714105641.15151-1-jingle.wu@emc.com.twSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingle Wu authored
Extend fetching and parsing parameters of the controllers to devices with "patterns" above 1 (which currently should be handled in the same fashion as devices with pattern 1). Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingle Wu authored
On older controllers IC type is reported in the 2nd byte of ETP_I2C_OSM_VERSION_CMD, however if controller's firmware is not flashed correctly it may return incorrect data. Fortunately there is also ETP_I2C_IAP_VERSION_P0_CMD command that can be used when controller in either normal or IAP mode, and which is guaranteed to return accurate data, so let's use it. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingle Wu authored
Not all versions of firmware implement "get pattern" command. When encountering those assume that the controllers use older pattern. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 16 Jul, 2020 1 commit
-
-
Michał Mirosław authored
Replace open-coded __set_bit() with the function. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/cf1dda3a372896cb01033ce084a7deb9620df7aa.1594599118.git.mirq-linux@rere.qmqm.plSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 09 Jul, 2020 1 commit
-
-
Dave Wang authored
This adds more hardware IDs for Elan touchpads found in various Lenovo laptops. Signed-off-by: Dave Wang <dave.wang@emc.com.tw> Link: https://lore.kernel.org/r/000201d5a8bd$9fead3f0$dfc07bd0$@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 07 Jul, 2020 8 commits
-
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707180857.GA30600@embeddedorSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
David Pedersen authored
This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12. Without nomux, the trackpad behaves as if only one finger is present and moves the cursor when trying to scroll. Signed-off-by: David Pedersen <limero1337@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Xu Wang authored
usb_free_coherent() is safe with NULL addr and this check is not required. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200707030905.3123-1-vulab@iscas.ac.cnSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sebastian Reichel authored
Switch to the "new" I2C probe API. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200520153936.46869-3-sebastian.reichel@collabora.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Colin Ian King authored
The variable error is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200603140431.131347-1-colin.king@canonical.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
This reverts commit 06170671 - it turns out that the resolution of 1 unit per mm was not correct for a number of touch screens, causing touch sizes to be reported as way too large. See https://crbug.com/1085648Reported-by: Harry Cutts <hcutts@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Derek Basehore authored
This moves the wakeup increment for elan devices to the touch report. This prevents the drivers from incorrectly reporting a wakeup when the resume callback resets then device, which causes an interrupt to occur. Signed-off-by: Derek Basehore <dbasehore@chromium.org> Link: https://lore.kernel.org/r/20200706235046.1984283-1-dbasehore@chromium.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Ilya Katsnelson authored
Tested on my own laptop, touchpad feels slightly more responsive with this on, though it might just be placebo. Signed-off-by: Ilya Katsnelson <me@0upti.me> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20200703143457.132373-1-me@0upti.meSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 30 Jun, 2020 2 commits
-
-
Merlijn Wajer authored
Instead, expose the key via the input framework, as SW_MACHINE_COVER The chip-detect GPIO is actually detecting if the cover is closed. Technically it's possible to use the SD card with open cover. The only downside is risk of battery falling out and user being able to physically remove the card. The behaviour of SD card not being available when the device is open is unexpected and creates more problems than it solves. There is a high chance, that more people accidentally break their rootfs by opening the case without physically removing the card. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Link: https://lore.kernel.org/r/20200612125402.18393-3-merlijn@wizzup.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Merlijn Wajer authored
This event code represents the state of a removable cover of a device. Value 0 means that the cover is open or removed, value 1 means that the cover is closed. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 09 Jun, 2020 1 commit
-
-
Arnd Bergmann authored
Making module name conflicts a fatal error breaks sparc64 allmodconfig: Error log: error: the following would cause module name conflict: drivers/char/adi.ko drivers/input/joystick/adi.ko Renaming one of the modules would solve the problem, but then cause other problems because neither of them is automatically loaded and changing the name is likely to break any setup that relies on manually loading it by name. As there is probably no sparc64 system with this kind of ancient joystick attached, work around it by adding a Kconfig dependency that forbids them from both being modules. It is still possible to build the joystick driver if the sparc64 adi driver is built-in. Reported-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200609100643.1245061-1-arnd@arndb.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 06 Jun, 2020 1 commit
-
-
Dmitry Torokhov authored
Prepare input updates for 5.8 merge window.
-
- 31 May, 2020 9 commits
-
-
Linus Torvalds authored
-
Joe Perches authored
Yes, staying withing 80 columns is certainly still _preferred_. But it's not the hard limit that the checkpatch warnings imply, and other concerns can most certainly dominate. Increase the default limit to 100 characters. Not because 100 characters is some hard limit either, but that's certainly a "what are you doing" kind of value and less likely to be about the occasional slightly longer lines. Miscellanea: - to avoid unnecessary whitespace changes in files, checkpatch will no longer emit a warning about line length when scanning files unless --strict is also used - Add a bit to coding-style about alignment to open parenthesis Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A pile of x86 fixes: - Prevent a memory leak in ioperm which was caused by the stupid assumption that the exit cleanup is always called for current, which is not the case when fork fails after taking a reference on the ioperm bitmap. - Fix an arithmething overflow in the DMA code on 32bit systems - Fill gaps in the xstate copy with defaults instead of leaving them uninitialized - Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out that existing user space fails to build" * tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioperm: Prevent a memory leak when fork fails x86/dma: Fix max PFN arithmetic overflow on 32 bit systems copy_xstate_to_kernel(): don't leave parts of destination uninitialized x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single scheduler fix preventing a crash in NUMA balancing. The current->mm check is not reliable as the mm might be temporary due to use_mm() in a kthread. Check for PF_KTHREAD explictly" * tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Don't NUMA balance for kthreads
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Another week, another set of bug fixes: 1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long. 2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin Long. 3) Re-arm discovery timer properly in mac80211 mesh code, from Linus Lüssing. 4) Prevent buffer overflows in nf_conntrack_pptp debug code, from Pablo Neira Ayuso. 5) Fix race in ktls code between tls_sw_recvmsg() and tls_decrypt_done(), from Vinay Kumar Yadav. 6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni. 7) More validation is necessary of untrusted GSO packets coming from virtualization devices, from Willem de Bruijn. 8) Fix endianness of bnxt_en firmware message length accesses, from Edwin Peer. 9) Fix infinite loop in sch_fq_pie, from Davide Caratti. 10) Fix lockdep splat in DSA by setting lockless TX in netdev features for slave ports, from Vladimir Oltean. 11) Fix suspend/resume crashes in mlx5, from Mark Bloch. 12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov. 13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu. 14) Fix leak in inetdev_init(), from Yang Yingliang. 15) Don't try to use inet hash and unhash in l2tp code, results in crashes. From Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits) l2tp: add sk_family checks to l2tp_validate_socket l2tp: do not use inet_hash()/inet_unhash() net: qrtr: Allocate workqueue before kernel_bind mptcp: remove msk from the token container at destruction time. mptcp: fix race between MP_JOIN and close mptcp: fix unblocking connect() net/sched: act_ct: add nat mangle action only for NAT-conntrack devinet: fix memleak in inetdev_init() virtio_vsock: Fix race condition in virtio_transport_recv_pkt drivers/net/ibmvnic: Update VNIC protocol version reporting NFC: st21nfca: add missed kfree_skb() in an error path neigh: fix ARP retransmit timer guard bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones bpf, selftests: Verifier bounds tests need to be updated bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones bpf: Fix use-after-free in fmod_ret check net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta() net/mlx5e: Fix MLX5_TC_CT dependencies net/mlx5e: Properly set default values when disabling adaptive moderation net/mlx5e: Fix arch depending casting issue in FEC ...
-
Eric Dumazet authored
syzbot was able to trigger a crash after using an ISDN socket and fool l2tp. Fix this by making sure the UDP socket is of the proper family. BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018 CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382 __kasan_report.cold+0x20/0x38 mm/kasan/report.c:511 kasan_report+0x33/0x50 mm/kasan/common.c:625 setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523 l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline] genl_family_rcv_msg net/netlink/genetlink.c:718 [inline] genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e6/0x810 net/socket.c:2352 ___sys_sendmsg+0x100/0x170 net/socket.c:2406 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45ca29 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4 Allocated by task 3018: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x161/0x7a0 mm/slab.c:3665 kmalloc include/linux/slab.h:560 [inline] sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612 sk_alloc+0x36/0x1100 net/core/sock.c:1666 data_sock_create drivers/isdn/mISDN/socket.c:600 [inline] mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Freed by task 2484: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] kasan_set_free_info mm/kasan/common.c:317 [inline] __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456 __cache_free mm/slab.c:3426 [inline] kfree+0x109/0x2b0 mm/slab.c:3757 kvfree+0x42/0x50 mm/util.c:603 __free_fdtable+0x2d/0x70 fs/file.c:31 put_files_struct fs/file.c:420 [inline] put_files_struct+0x248/0x2e0 fs/file.c:413 exit_files+0x7e/0xa0 fs/file.c:445 do_exit+0xb04/0x2dd0 kernel/exit.c:791 do_group_exit+0x125/0x340 kernel/exit.c:894 get_signal+0x47b/0x24e0 kernel/signal.c:2739 do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784 exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x49/0xb3 The buggy address belongs to the object at ffff88808ed0c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1424 bytes inside of 2048-byte region [ffff88808ed0c000, ffff88808ed0c800) The buggy address belongs to the page: page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00 raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 6b9f3423 ("l2tp: fix races in tunnel creation") Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Guillaume Nault <gnault@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot recently found a way to crash the kernel [1] Issue here is that inet_hash() & inet_unhash() are currently only meant to be used by TCP & DCCP, since only these protocols provide the needed hashinfo pointer. L2TP uses a single list (instead of a hash table) This old bug became an issue after commit 61023658 ("bpf: Add new cgroup attach type to enable sock modifications") since after this commit, sk_common_release() can be called while the L2TP socket is still considered 'hashed'. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: sk_common_release+0xba/0x370 net/core/sock.c:3210 inet_create net/ipv4/af_inet.c:390 [inline] inet_create+0x966/0xe00 net/ipv4/af_inet.c:248 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x441e29 Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29 RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 23b6578228ce553e ]--- RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 0d76751f ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Andrii Nakryiko <andriin@fb.com> Reported-by: syzbot+3610d489778b57cc8031@syzkaller.appspotmail.com
-
Chris Lew authored
A null pointer dereference in qrtr_ns_data_ready() is seen if a client opens a qrtr socket before qrtr_ns_init() can bind to the control port. When the control port is bound, the ENETRESET error will be broadcasted and clients will close their sockets. This results in DEL_CLIENT packets being sent to the ns and qrtr_ns_data_ready() being called without the workqueue being allocated. Allocate the workqueue before setting sk_data_ready and binding to the control port. This ensures that the work and workqueue structs are allocated and initialized before qrtr_ns_data_ready can be called. Fixes: 0c2204a4 ("net: qrtr: Migrate nameservice to kernel from userspace") Signed-off-by: Chris Lew <clew@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Paolo Abeni says: ==================== mptcp: a bunch of fixes This patch series pulls together a few bugfixes for MPTCP bug observed while doing stress-test with apache bench - forced to use MPTCP and multiple subflows. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-