- 10 Feb, 2021 6 commits
-
-
Johannes Berg authored
The only thing we do touching the device in hard interrupt context is, at most, writing an interrupt ACK register, which isn't racing in with anything protected by the reg_lock. Thus, avoid disabling interrupts here for potentially long periods of time, particularly long periods have been observed with dumping of firmware memory (leading to lockup warnings on some devices.) Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.da916ab91298.I064c3e7823b616647293ed97da98edefb9ce9435@changeidSigned-off-by:
-
Luca Coelho authored
Some devices were missing from the So with Hr section. Signed-off-by:
-
Takashi Iwai authored
The ucode TLV data may be read-only and should be treated as const pointers, but currently a few code forcibly cast to the writable pointer unnecessarily. This gave developers a wrong impression as if it can be modified, resulting in crashing regressions already a couple of times. This patch adds the const prefix to those cast pointers, so that such attempt can be caught more easily in future. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
-
Ihab Zhaika authored
add few PCI ID'S for So with Hr and Qu with Hr in AX family. Cc: stable@vger.kernel.org Signed-off-by:
Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by:
-
Jiapeng Chong authored
Fix the following coccicheck warning: ./drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:3853:7-17: WARNING: Comparison of 0/1 to bool variable. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612840381-109714-1-git-send-email-jiapeng.chong@linux.alibaba.com
-
Jiapeng Chong authored
Fix the follow coccicheck warnings: ./drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c:2305:6-27: WARNING: Comparison of 0/1 to bool variable. ./drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c:1376:5-26: WARNING: Comparison of 0/1 to bool variable. Reported-by:
-
- 09 Feb, 2021 1 commit
-
-
Alvin Šipraga authored
Add support for CQM RSSI measurement reporting and advertise the NL80211_EXT_FEATURE_CQM_RSSI_LIST feature. This enables a userspace supplicant such as iwd to be notified of changes in the RSSI for roaming and signal monitoring purposes. Signed-off-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
- 08 Feb, 2021 24 commits
-
-
https://github.com/nbd168/wirelessKalle Valo authored
mt76 patches for 5.12 * add new mt7921e driver * factor out common code shared between 7615/7663 and 7921 * performance optimizations * 7915 dbdc fixes * 802.11 encap offload support * support for multiple pcie gen1 host interfaces on 7915 * 7915 testmode support * bugfixes * testmode support enhancements * endian fixes * 7915 txbf support
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches intended for v5.12 * Check FW notification sizes for robustness; * Improvements in the NAPI implementation; * Implement a workaround for CCA-EXT; * Add new FW API support; * Fix a CSA bug; * Implement PHY integration version parsing; * A bit of refactoring; * One more CSA bug fix, this time in the AP side; * Support for new So devices and a bit of reorg; * Per Platform Antenna Gain (PPAG) fixes and improvements; * Improvements in the debug framework; * Some other clean-ups and small fixes. # gpg: Signature made Fri 05 Feb 2021 12:04:21 PM EET using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./include/linux/ssb/ssb_driver_gige.h:89:8-9: WARNING: return of 0/1 in function 'ssb_gige_one_dma_at_once' with return type bool. ./include/linux/ssb/ssb_driver_gige.h:79:8-9: WARNING: return of 0/1 in function 'ssb_gige_have_roboswitch' with return type bool. ./include/linux/ssb/ssb_driver_gige.h:182:8-9: WARNING: return of 0/1 in function 'ssb_gige_must_flush_posted_writes' with return type bool. ./include/linux/ssb/ssb_driver_gige.h:178:8-9: WARNING: return of 0/1 in function 'ssb_gige_one_dma_at_once' with return type bool. ./include/linux/ssb/ssb_driver_gige.h:174:8-9: WARNING: return of 0/1 in function 'ssb_gige_have_roboswitch' with return type bool. ./include/linux/ssb/ssb_driver_gige.h:170:8-9: WARNING: return of 0/1 in function 'ssb_gige_is_rgmii' with return type bool. ./include/linux/ssb/ssb_driver_gige.h:162:8-9: WARNING: return of 0/1 in function 'pdev_is_ssb_gige_core' with return type bool. Reported-by:
Michael Büsch <m@bues.ch> Signed-off-by:
-
Arnd Bergmann authored
sturct mwl8k_dma_data contains a ieee80211_hdr structure, which is required to have at least two byte alignment, and this conflicts with the __packed attribute: vers/net/wireless/marvell/mwl8k.c:811:1: warning: alignment 1 of 'struct mwl8k_dma_data' is less than 2 [-Wpacked-not-aligned] Mark mwl8k_dma_data itself as having two-byte alignment to ensure the inner structure is properly aligned. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
struct wl3501_80211_tx_hdr contains a ieee80211_hdr structure, which is required to have at least two byte alignment, and this conflicts with the __packed attribute: wireless/wl3501.h:553:1: warning: alignment 1 of 'struct wl3501_80211_tx_hdr' is less than 2 [-Wpacked-not-aligned] Mark wl3501_80211_tx_hdr itself as having two-byte alignment to ensure the inner structure is properly aligned. Signed-off-by:
-
Stanislaw Gruszka authored
Add support for Sweex LW163V2 device. Signed-off-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./drivers/net/wireless/intel/iwlegacy/4965-mac.c:2596:54-56: WARNING !A || A && B is equivalent to !A || B. Reported-by:
-
wengjianfeng authored
remove duplicate word 'we' in comment change 'then' to 'than' in comment Signed-off-by:
wengjianfeng <wengjianfeng@yulong.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
wengjianfeng authored
INVALID_QUEUE has been used as a return value,it is not necessary to assign it to q_num,so just return INVALID_QUEUE. Signed-off-by:
-
wengjianfeng authored
define refilled and then assign value to it, which should do that at the same time. Signed-off-by:
-
wengjianfeng authored
-ENOMEM has been used as a return value,it is not necessary to assign it, and if kzalloc fail,not need free it,so just return -ENOMEM when kzalloc fail. Signed-off-by:
-
Yen-lin Lai authored
When a network is moved or reconfigured on the different channel, there can be multiple BSSes with the same BSSID and SSID in scan result before the old one expires. Then, it can cause cfg80211_connect_result to map current_bss to a bss with the wrong channel. Let mwifiex_cfg80211_assoc return the selected BSS and then the caller can report it cfg80211_connect_bss. Signed-off-by:
Yen-lin Lai <yenlinlai@chromium.org> Reviewed-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
wengjianfeng authored
at first, ret was assigned to zero, but later assigned to a funciton,so the assignment to zero is no use, which can simple be removed instead. Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Zheng Yongjun authored
mutex lock can be initialized automatically with DEFINE_MUTEX() rather than explicitly calling mutex_init(). Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Arnd Bergmann authored
sturct d11txh contains a ieee80211_rts structure, which is required to have at least two byte alignment, and this conflicts with the __packed attribute: drivers/net/wireless/broadcom/brcm80211/brcmsmac/d11.h:786:1: warning: alignment 1 of 'struct d11txh' is less than 2 [-Wpacked-not-aligned] Mark d11txh itself as having two-byte alignment to ensure the inner structure is properly aligned. Signed-off-by:
-
Hans de Goede authored
The Voyo winpad A15 tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: rcmfmac4330-sdio.To be filled by O.E.M.-To be filled by O.E.M..txt as nvram file which is a bit too generic. Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Voyo winpad A15 tablet. While preparing a matching linux-firmware update I noticed that the nvram is identical to the nvram used on the Prowise-PT301 tablet, so the new DMI quirk entry simply points to the already existing Prowise-PT301 nvram file. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
The Predia Basic tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: brcmfmac43340-sdio.Insyde-CherryTrail.txt as nvram file which is a bit too generic. Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Predia Basic tablet. Signed-off-by:
-
Guo-Feng Fan authored
RFE type2 is a new NIC which has one RF antenna shares with BT. Update phy parameter to verstion V57 to allow initial procedure to load extra AGC table for sharing antenna NIC. Signed-off-by:
Guo-Feng Fan <vincent_fann@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Tested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Guo-Feng Fan authored
Incorrect CCK RSSI may cause periodically scan from upper layer. 8821c phy status does NOT has actual value of CCK power. It provides only lna and vga index. Driver have to use these indexes to calculate actual RSSI. Signed-off-by:
-
Guo-Feng Fan authored
This patch fixes a defect that uses incorrect function to access registers. Use 8 and 32 bit access function to access 8 and 32 bit long data respectively. Signed-off-by:
-
Colin Ian King authored
The variable rtstatu is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Emil Renner Berthing authored
In commit d3ccc14d most of the tasklets in this driver was updated to the new API. However for the rx_work_tasklet only the type of the callback was changed from void _rtl_rx_work(unsigned long data) to void _rtl_rx_work(struct tasklet_struct *t). The initialization of rx_work_tasklet was still open-coded and the function pointer just cast into the old type, and hence nothing sets rx_work_tasklet.use_callback = true and the callback was still called as t->func(t->data); with uninitialized/zero t->data. Commit 6b8c7574 changed the casting of _rtl_rx_work a bit and initialized t->data to a pointer to the tasklet cast to an unsigned long. This way calling t->func(t->data) might actually work through all the casting, but it still doesn't update the code to use the new tasklet API. Let's use the new tasklet_setup to initialize rx_work_tasklet properly and set rx_work_tasklet.use_callback = true so that the callback is called as t->callback(t); without all the casting. Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.12. Major changes: ath10k * support setting SAR limits via nl80211
-
- 07 Feb, 2021 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-02-05 This series contains updates to ice driver only. Jake adds adds reporting of timeout length during devlink flash and implements support to report devlink info regarding the version of firmware that is stored (downloaded) to the device, but is not yet active. ice_devlink_info_get will report "stored" versions when there is no pending flash update. Version info includes the UNDI Option ROM, the Netlist module, and the fw.bundle_id. Gustavo A. R. Silva replaces a one-element array to flexible-array member. Bruce utilizes flex_array_size() helper and removes dead code on a check for a condition that can't occur. v2: * removed security revision implementation, and re-ordered patches to account for this removal * squashed patches implementing ice_read_flash_module to avoid patches refactoring the implementation of a previous patch in the series * modify ice_devlink_info_get to always report "stored" versions instead of only reporting them when a pending flash update is ready. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: remove dead code ice: use flex_array_size where possible ice: Replace one-element array with flexible-array member ice: display stored UNDI firmware version via devlink info ice: display stored netlist versions via devlink info ice: display some stored NVM versions via devlink info ice: introduce function for reading from flash modules ice: cache NVM module bank information ice: introduce context struct for info report ice: create flash_info structure and separate NVM version ice: report timeout length for erasing during devlink flash ==================== Link: https://lore.kernel.org/r/20210206044101.636242-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 06 Feb, 2021 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Remove indirection and use nf_ct_get() instead from nfnetlink_log and nfnetlink_queue, from Florian Westphal. 2) Add weighted random twos choice least-connection scheduling for IPVS, from Darby Payne. 3) Add a __hash placeholder in the flow tuple structure to identify the field to be included in the rhashtable key hash calculation. 4) Add a new nft_parse_register_load() and nft_parse_register_store() to consolidate register load and store in the core. 5) Statify nft_parse_register() since it has no more module clients. 6) Remove redundant assignment in nft_cmp, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: netfilter: nftables: remove redundant assignment of variable err netfilter: nftables: statify nft_parse_register() netfilter: nftables: add nft_parse_register_store() and use it netfilter: nftables: add nft_parse_register_load() and use it netfilter: flowtable: add hash offset field to tuple ipvs: add weighted random twos choice algorithm netfilter: ctnetlink: remove get_ct indirection ==================== Link: https://lore.kernel.org/r/20210206015005.23037-1-pablo@netfilter.orgSigned-off-by:
-
Heiner Kallweit authored
There's no benefit in trying to disable interrupts if NAPI is scheduled already. This allows us to save a PCI write in this case. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/78c7f2fb-9772-1015-8c1d-632cbdff253f@gmail.comSigned-off-by:
-
Xie He authored
The "dev_has_header" function, recently added in commit d5496990 ("net/packet: fix packet receive on L3 devices without visible hard header"), is more accurate as criteria for determining whether a device exposes the LL header to upper layers, because in addition to dev->header_ops, it also checks for dev->header_ops->create. When transmitting an skb on a device, dev_hard_header can be called to generate an LL header. dev_hard_header will only generate a header if dev->header_ops->create is present. Signed-off-by:
Xie He <xie.he.0141@gmail.com> Acked-by:
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: a mix of small improvements Version 2 of this series restructures a couple of the changed functions (in patches 1 and 2) to avoid blocks of indented code by returning early when possible, as suggested by Jakub. The description of the first patch was changed as a result, to better reflect what the updated patch does. It also fixes one spot I identified when updating the code, where gsi_channel_stop() was doing the wrong thing on error. The original description for this series is below. This series contains a sort of unrelated set of code cleanups. The first two are things I wanted to do in a series that updated some NAPI code recently. I didn't want to change things in a way that affected existing testing so I set these aside for later (i.e., now). The third makes a change to event ring handling that's similar to what was done a while back for channels. There's little benefit to cacheing the current state of an event ring, so with this we'll just fetch the state from hardware whenever we need it. The fourth patch removes the definitions of two unused symbols. The fifth replaces a count that is always 0 or 1 with a Boolean. The sixth removes a build-time validation check that doesn't really provide benefit. And the last one fixes a problem (in two spots) that could cause a build-time check to fail "bogusly". ==================== Link: https://lore.kernel.org/r/20210205221100.1738-1-elder@linaro.orgSigned-off-by:
-
Alex Elder authored
It's possible that the length passed to ipa_header_size_encoded() is larger than what can be represented by the HDR_LEN field alone (starting with IPA v4.5). If we attempted that, u32_encode_bits() would trigger a build-time error. Avoid this problem by masking off high-order bits of the value encoded as the lower portion of the header length. The same sort of problem exists in ipa_metadata_offset_encoded(), so implement the same fix there. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
There is a build-time check that the packet status structure is a multiple of 4 bytes in size. It's not clear where that constraint comes from, but the structure defines what hardware provides so its definition won't change. Get rid of the check; it adds no value. Signed-off-by:
-
Alex Elder authored
The count argument to ipa_endpoint_replenish() is only ever 0 or 1, and always will be (because we always handle each receive buffer in a single transaction). Rename the argument to be add_one and change it to be Boolean. Update the function description to reflect the current code. Signed-off-by:
-
Alex Elder authored
We do not support inter-EE channel or event ring commands. Inter-EE interrupts are disabled (and never re-enabled) for all channels and event rings, so we have no need for the GSI registers that clear those interrupt conditions. So remove their definitions. Signed-off-by:
-
