With v1 page table, the AMD IOMMU spec states that the hardware must use
the domain ID to tag its internal translation caches. I/O devices with
different v1 page tables must be given different domain IDs. I/O devices
that share the same v1 page table __may__ be given the same domain ID.
This domain ID management policy is currently implemented by the AMD
IOMMU driver. In this case, only the domain ID is needed when issuing the
INVALIDATE_IOMMU_PAGES command to invalidate the IOMMU translation cache
(TLB).

With v2 page table, the hardware uses domain ID and PASID as parameters
to tag and issue the INVALIDATE_IOMMU_PAGES command. Since the GCR3 table
is setup per-device, and there is no guarantee for PASID to be unique
across multiple devices. The same PASID for different devices could
have different v2 page tables. In such case, if multiple devices share the
same domain ID, IOMMU translation cache for these devices would be polluted
due to TLB aliasing.

Hence, avoid the TLB aliasing issue with v2 page table by allocating unique
domain ID for each device even when multiple devices are sharing the same v1
page table. Please note that this fix would result in multiple
INVALIDATE_IOMMU_PAGES commands (one per domain id) when unmapping a
translation.

Domain ID can be shared until device starts using PASID. We will enhance this
code later where we will allocate per device domain ID only when its needed.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-18-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Since they are moved to struct iommu_dev_data, and the driver has been
ported to use them.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-17-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Consolidate all flush related code in one place so that its easy
to maintain.

No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-16-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

We have removed iommu_v2 module and converted v2 page table to use
common flush functions. Also we have moved GCR3 table to per device.
PASID related functions are not used. Hence remove these unused
functions.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-15-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

To use the new per-device struct gcr3_tbl_info. Use GFP_KERNEL flag
instead of GFP_ATOMIC for GCR3 table allocation. Also modify
set_dte_entry() to use new per device GCR3 table.

Also in free_gcr3_table() path replace BUG_ON with WARN_ON_ONCE().
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-14-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

To removes the code to setup GCR3 table, and only handle domain
create / destroy, since GCR3 is no longer part of a domain.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-13-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

If domain is configured with V2 page table then setup default GCR3
with domain GCR3 pointer. So that all devices in the domain uses same page
table for translation. Also return page table setup status from do_attach()
function.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-12-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Refactor GCR3 helper functions in preparation to use per device
GCR3 table.
  * Add new function update_gcr3 to update per device GCR3 table

  * Remove per domain default GCR3 setup during v2 page table allocation.
    Subsequent patch will add support to setup default gcr3 while
    attaching device to domain.

  * Remove amd_iommu_domain_update() from V2 page table path as device
    detach path will take care of updating the domain.

  * Consolidate GCR3 table related code in one place so that its easy
    to maintain.

  * Rename functions to reflect its usage.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-11-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Add function to check iommu group mutex lock. So that device drivers can
rely on group mutex lock instead of adding another driver level lock
before modifying driver specific device data structure.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-10-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Consolidate GCR3 table related code in one place so that its easy
to maintain.

Note that this patch doesn't move __set_gcr3/__clear_gcr3. We are moving
GCR3 table from per domain to per device. Following series will rework
these functions. During that time I will move these functions as well.

No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-9-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Add support to invalidate TLB/IOTLB for the given device.

These functions will be used in subsequent patches where we will
introduce per device GCR3 table and SVA support.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-8-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Page table mode (v1, v2 or pt) is per domain property. Recently we have
enhanced protection_domain.pd_mode to track per domain page table mode.
Use that variable to check the page table mode instead of global
'amd_iommu_pgtable' in {map/unmap}_pages path.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-7-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

AMD IOMMU GCR3 table is indexed by PASID. Each entry stores guest CR3
register value, which is an address to the root of guest IO page table.
The GCR3 table can be programmed per-device. However, Linux AMD IOMMU
driver currently managing the table on a per-domain basis.

PASID is a device feature. When SVA is enabled it will bind PASID to
device, not domain. Hence it makes sense to have per device GCR3 table.

Introduce struct iommu_dev_data.gcr3_tbl_info to keep track of GCR3 table
configuration. This will eventually replaces gcr3 related variables in
protection_domain structure.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-6-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

This enum variable is used to track the type of page table used by the
protection domain. It will replace the protection_domain.flags in
subsequent series.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-5-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Introduce get_amd_iommu_from_dev() and get_amd_iommu_from_dev_data().
And replace rlookup_amd_iommu() with the new helper function where
applicable to avoid unnecessary loop to look up struct amd_iommu from
struct device.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-4-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

IOMMU Guest Translation (GT) feature needs to be enabled before
invalidating guest translations (CMD_INV_IOMMU_PAGES with GN=1).

Currently GT feature is enabled after setting up interrupt handler.
So far it was fine as we were not invalidating guest page table
before this point.

Upcoming series will introduce per device GCR3 table and it will
invalidate guest pages after configuring. Hence move GT feature
enablement to early_enable_iommu().
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-3-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Pass iommu_dev_data structure instead of passing indivisual variables.

No functional changes intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240205115615.6053-2-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

.. as IOMMU perf counters are always built as part of kernel.

No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-7-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

iommu_init_device() is not returning -ENOTSUPP since commit 61289cba
("iommu/amd: Remove old alias handling code").

No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-6-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Perf counter related functions are defined in amd-iommu.h as well.
Hence remove duplicate declarations.

No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-5-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

These macros are not used after commit 518d9b45 ("iommu/amd: Remove
special mapping code for dma_ops path").

No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-4-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

These macros are not used after commit ac6d7046 ("iommu/dma: Pass
address limit rather than size to iommu_setup_dma_ops()").

No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-3-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Commit 5a0b11a1 ("iommu/amd: Remove iommu_v2 module") missed to
remove PPR_* macros. Remove these macros as its not used anymore.

No functional change intended.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240118090105.5864-2-vasant.hegde@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
  and extent handling code"

* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
  ext4: make ext4_map_blocks() distinguish delalloc only extent
  ext4: add a hole extent entry in cache after punch
  ext4: correct the hole length returned by ext4_map_blocks()
  ext4: convert to exclusive lock while inserting delalloc extents
  ext4: refactor ext4_da_map_blocks()
  ext4: remove 'needed' in trace_ext4_discard_preallocations
  ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
  ext4: remove unused return value of ext4_mb_release_group_pa
  ext4: remove unused return value of ext4_mb_release_inode_pa
  ext4: remove unused return value of ext4_mb_release
  ext4: remove unused ext4_allocation_context::ac_groups_considered
  ext4: remove unneeded return value of ext4_mb_release_context
  ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
  ext4: remove unused return value of __mb_check_buddy
  ext4: mark the group block bitmap as corrupted before reporting an error
  ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
  ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
  ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
  ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
  ...

Pull smb client fixes from Steve French:
 "Five smb3 client fixes, mostly multichannel related:

   - four multichannel fixes including fix for channel allocation when
     multiple inactive channels, fix for unneeded race in channel
     deallocation, correct redundant channel scaling, and redundant
     multichannel disabling scenarios

   - add warning if max compound requests reached"

* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: increase number of PDUs allowed in a compound request
  cifs: failure to add channel on iface should bump up weight
  cifs: do not search for channel if server is terminating
  cifs: avoid redundant calls to disable multichannel
  cifs: make sure that channel scaling is done only once

Pull xfs fixes from Chandan Babu:

 - Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
   attribute fork

 - Remove conditional compilation of realtime geometry validator
   functions to prevent confusing error messages from being printed on
   the console during the mount operation

* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove conditional building of rt geometry validator functions
  xfs: reset XFS_ATTR_INCOMPLETE filter on node removal

Pull char/misc driver fixes from Greg KH:
 "Here are three tiny driver fixes for 6.8-rc3.  They include:

   - Android binder long-term bug with epoll finally being fixed

   - fastrpc driver shutdown bugfix

   - open-dice lockdep fix

  All of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: signal epoll threads of self-work
  misc: open-dice: Fix spurious lockdep warning
  misc: fastrpc: Mark all sessions as invalid in cb_remove

Pull tty and serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.8-rc3 that
  resolve a number of reported issues. Included in here are:

   - rs485 flag definition fix that affected the user/kernel abi in -rc1

   - max310x driver fixes

   - 8250_pci1xxxx driver off-by-one fix

   - uart_tiocmget locking race fix

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: max310x: prevent infinite while() loop in port startup
  serial: max310x: fail probe if clock crystal is unstable
  serial: max310x: improve crystal stable clock detection
  serial: max310x: set default value when reading clock ready bit
  serial: core: Fix atomicity violation in uart_tiocmget
  serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
  tty: serial: Fix bit order in RS485 flag definitions

Pull USB driver fixes from Greg KH:
 "Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
  here are:

   - new usb-serial driver ids

   - new dwc3 driver id added

   - typec driver change revert

   - ncm gadget driver endian bugfix

   - xhci bugfixes for a number of reported issues

   - usb hub bugfix for alternate settings

   - ulpi driver debugfs memory leak fix

   - chipidea driver bugfix

   - usb gadget driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  USB: serial: option: add Fibocom FM101-GL variant
  USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
  USB: serial: cp210x: add ID for IMST iM871A-USB
  usb: typec: tcpm: fix the PD disabled case
  usb: ucsi_acpi: Quirk to ack a connector change ack cmd
  usb: ucsi_acpi: Fix command completion handling
  usb: ucsi: Add missing ppm_lock
  usb: ulpi: Fix debugfs directory leak
  Revert "usb: typec: tcpm: fix cc role at port reset"
  usb: gadget: pch_udc: fix an Excess kernel-doc warning
  usb: f_mass_storage: forbid async queue when shutdown happen
  USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
  usb: chipidea: core: handle power lost in workqueue
  usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
  usb: dwc3: pci: add support for the Intel Arrow Lake-H
  usb: core: Prevent null pointer dereference in update_port_device_state
  xhci: handle isoc Babble and Buffer Overrun events properly
  xhci: process isoc TD properly when there was a transaction error mid TD.
  xhci: fix off by one check when adding a secondary interrupter.
  xhci: fix possible null pointer dereference at secondary interrupter removal
  ...

Pull i2c fixlet from Wolfram Sang:
 "MAINTAINERS update to point people to the new tree for i2c host driver
  changes"

* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: Update i2c host drivers repository

Pull dmaengine fixes from Vinod Koul:
 "Core:

   - fix return value of is_slave_direction() for D2D dma

  Driver fixes for:

   - Documentaion fixes to resolve warnings for at_hdmac driver

   - bunch of fsl driver fixes for memory leaks, and useless kfree

   - TI edma and k3 fixes for packet error and null pointer checks"

* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: at_hdmac: add missing kernel-doc style description
  dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
  dmaengine: fsl-qdma: Remove a useless devm_kfree()
  dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
  dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
  dmaengine: ti: k3-udma: Report short packet errors
  dmaengine: ti: edma: Add some null pointer checks to the edma_probe
  dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
  dmaengine: at_hdmac: fix some kernel-doc warnings

Pull phy driver fixes from Vinod Koul:

 - TI null pointer dereference

 - missing erdes mux entry in lan966x driver

 - Return of error code in renesas driver

 - Serdes init sequence and register offsets for IPQ drivers

* tag 'phy-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
  phy: lan966x: Add missing serdes mux entry
  phy: renesas: rcar-gen3-usb2: Fix returning wrong error code
  phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
  phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018

Merge tag 'i2c-host-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

Just a maintenance patch that updates the repository where the
i2c host and muxes related patches will be collected.

Merge tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:
 "Vendor events:

   - Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
     ("cpu_atom", "cpu_core") needs to be used as a prefix to be
     considered on a metric formula, detected via one of the 'perf test'
     entries.

  'perf test' fixes:

   - Fix the creation of event selector lists on 'perf test' entries, by
     initializing the sample ID flag, which is done by 'perf record', so
     this fix affects only the tests, the common case isn't affected

   - Make 'perf list' respect debug settings (-v) to fix its 'perf test'
     entry

   - Fix 'perf script' test when python support isn't enabled

   - Special case 'perf script' tests on s390, where only DWARF call
     graphs are supported and only on software events

   - Make 'perf daemon' signal test less racy

  Compiler warnings/errors:

   - Remove needless malloc(0) call in 'perf top' that triggers
     -Walloc-size

   - Fix calloc() argument order to address error introduced in gcc-14

  Build:

   - Make minimal shellcheck version to v0.6.0, avoiding the build to
     fail with older versions

  Sync kernel header copies:

   - stat.h to pick STATX_MNT_ID_UNIQUE

   - msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING

   - drm.h to pick DRM_IOCTL_MODE_CLOSEFB

   - unistd.h to pick {list,stat}mount,
     lsm_{[gs]et_self_attr,list_modules} syscall numbers

   - x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes

   - x86's mem{cpy,set}_64.S used in 'perf bench'

   - Also, without tooling effects: asm-generic/unaligned.h, mount.h,
     fcntl.h, kvm headers"

* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
  perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
  tools include UAPI: Sync linux/mount.h copy with the kernel sources
  perf evlist: Fix evlist__new_default() for > 1 core PMU
  tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
  tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
  tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
  perf vendor events intel: Alderlake/sapphirerapids metric fixes
  tools headers UAPI: Sync kvm headers with the kernel sources
  perf tools: Fix calloc() arguments to address error introduced in gcc-14
  perf top: Remove needless malloc(0) call that triggers -Walloc-size
  perf build: Make minimal shellcheck version to v0.6.0
  tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
  perf test shell daemon: Make signal test less racy
  perf test shell script: Fix test for python being disabled
  perf test: Workaround debug output in list test
  perf list: Add output file option
  perf list: Switch error message to pr_err() to respect debug settings (-v)
  perf test: Fix 'perf script' tests on s390
  tools headers UAPI: Sync linux/fcntl.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
  ...

Pull tracing and eventfs fixes from Steven Rostedt:

 - Fix the return code for ring_buffer_poll_wait()

   It was returing a -EINVAL instead of EPOLLERR.

 - Zero out the tracefs_inode so that all fields are initialized.

   The ti->private could have had stale data, but instead of just
   initializing it to NULL, clear out the entire structure when it is
   allocated.

 - Fix a crash in timerlat

   The hrtimer was initialized at read and not open, but is canceled at
   close. If the file was opened and never read the close will pass a
   NULL pointer to hrtime_cancel().

 - Rewrite of eventfs.

   Linus wrote a patch series to remove the dentry references in the
   eventfs_inode and to use ref counting and more of proper VFS
   interfaces to make it work.

 - Add warning to put_ei() if ei is not set to free. That means
   something is about to free it when it shouldn't.

 - Restructure the eventfs_inode to make it more compact, and remove the
   unused llist field.

 - Remove the fsnotify*() funtions for when the inodes were being
   created in the lookup code. It doesn't make sense to notify about
   creation just because something is being looked up.

 - The inode hard link count was not accurate.

   It was being updated when a file was looked up. The inodes of
   directories were updating their parent inode hard link count every
   time the inode was created. That means if memory reclaim cleaned a
   stale directory inode and the inode was lookup up again, it would
   increment the parent inode again as well. Al Viro said to just have
   all eventfs directories have a hard link count of 1. That tells user
   space not to trust it.

* tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Keep all directory links at 1
  eventfs: Remove fsnotify*() functions from lookup()
  eventfs: Restructure eventfs_inode structure to be more condensed
  eventfs: Warn if an eventfs_inode is freed without is_freed being set
  tracing/timerlat: Move hrtimer_init to timerlat_fd open()
  eventfs: Get rid of dentry pointers without refcounts
  eventfs: Clean up dentry ops and add revalidate function
  eventfs: Remove unused d_parent pointer field
  tracefs: dentry lookup crapectomy
  tracefs: Avoid using the ei->dentry pointer unnecessarily
  eventfs: Initialize the tracefs inode properly
  tracefs: Zero out the tracefs_inode when allocating it
  ring-buffer: Clean ring_buffer_poll_wait() error return

Pull gfs2 revert from Andreas Gruenbacher:
 "It turns out that the commit to use GL_NOBLOCK flag for non-blocking
  lookups has several issues, and not all of them have a simple fix"

* tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"

Pull pci fixes from Bjorn Helgaas:

 - Fix a potential deadlock that was reintroduced by an ASPM revert
   merged for v6.8 (Johan Hovold)

 - Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
   Pieralisi)

* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
  PCI/ASPM: Fix deadlock when enabling ASPM

Pul drm fixes from Dave Airlie:
 "Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
  better fix for the deadlock and also helps with a sync race we were
  seeing.

  dma-buf:
   - heaps CMA page accounting fix

  virtio-gpu:
   - fix segment size

  xe:
   - A crash fix
   - A fix for an assert due to missing mem_acces ref
   - Only allow a single user-fence per exec / bind.
   - Some sparse warning fixes
   - Two fixes for compilation failures on various odd combinations of
     gcc / arch pointed out on LKML.
   - Fix a fragile partial allocation pointed out on LKML.
   - A sysfs ABI documentation warning fix

  amdgpu:
   - Fix reboot issue seen on some 7000 series dGPUs
   - Fix client init order for KFD
   - Misc display fixes
   - USB-C fix
   - DCN 3.5 fixes
   - Fix issues with GPU scheduler and GPU reset
   - GPU firmware loading fix
   - Misc fixes
   - GC 11.5 fix
   - VCN 4.0.5 fix
   - IH overflow fix

  amdkfd:
   - SVM fixes
   - Trap handler fix
   - Fix device permission lookup
   - Properly reserve BO before validating it

  nouveau:
   - fence/irq lock deadlock fix (second attempt)
   - gsp command size fix

* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
  nouveau: offload fence uevents work to workqueue
  nouveau/gsp: use correct size for registry rpc.
  drm/amdgpu/pm: Use inline function for IP version check
  drm/hwmon: Fix abi doc warnings
  drm/xe: Make all GuC ABI shift values unsigned
  drm/xe/vm: Subclass userptr vmas
  drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
  drm/xe: Don't use __user error pointers
  drm/xe: Annotate mcr_[un]lock()
  drm/xe: Only allow 1 ufence per exec / bind IOCTL
  drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
  drm/xe: Fix crash in trace_dma_fence_init()
  drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
  drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
  drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
  drm/amdkfd: reserve the BO before validating it
  drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
  drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
  drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
  drm/amd: Don't init MEC2 firmware when it fails to load
  ...

Pull input fixes from Dmitry Torokhov:

 - a fix for the fix to deal with newer laptops which get confused by
   the "GET ID" command when probing for PS/2 keyboards

 - a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728
   laptops

 - a change to bcm5974 to validate that the device has appropriate
   endpoints

 - an addition of new product ID to xpad driver to recognize Lenovo
   Legion Go controllers

 - a quirk to Goodix controller to deal with extra GPIO described in
   ACPI tables on some devices.

* tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
  Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
  Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
  Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
  Input: bcm5974 - check endpoint type before starting traffic
  Input: xpad - add Lenovo Legion Go controllers
  Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0