- 13 Feb, 2020 31 commits
-
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert sti over. v2: * remove unnecessary include of sti_crtc.h from sti_drv.c Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-17-tzimmermann@suse.de
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert stm over. Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Acked-by:
Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-16-tzimmermann@suse.de
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert stm over. Signed-off-by:
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert msm over. Signed-off-by:
Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-14-tzimmermann@suse.de
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert msm over. Signed-off-by:
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert radeon over. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-12-tzimmermann@suse.de
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert radeon over. v4: * 80-character line fixes Signed-off-by:
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert nouvean over. v4: * add argument names in function declaration Signed-off-by:
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert nouveau over. v4: * add argument names in function declaration Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert i915 over. The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). i915 doesn't use CRTC helpers. Instead pass i915's implementation of get_scanout_position() to DRM core's drm_crtc_vblank_helper_get_vblank_timestamp_internal(). v3: * rename dcrtc to _crtc * use intel_ prefix for i915_crtc_get_vblank_timestamp() * update for drm_crtc_vblank_helper_get_vblank_timestamp_internal() v2: * use DRM's implementation of get_vblank_timestamp() * simplify function names Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert gma500 over. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-7-tzimmermann@suse.de
-
Thomas Zimmermann authored
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert amdgpu over. v2: * don't wrap existing functions; change signature instead Signed-off-by:
-
Thomas Zimmermann authored
The callback struct drm_driver.get_scanout_position() is deprecated in favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert amdgpu over. Signed-off-by:
-
Thomas Zimmermann authored
The callback get_vblank_timestamp() is currently located in struct drm_driver, but really belongs into struct drm_crtc_funcs. Add an equivalent there. Driver will be converted in separate patches. The default implementation is drm_calc_vbltimestamp_from_scanoutpos(). The patch adds drm_crtc_vblank_helper_get_vblank_timestamp(), which is an implementation for the CRTC callback. v4: * more readable code for setting high_prec (Ville, Jani) v3: * use refactored timestamp calculation to minimize duplicated code * do more checks for crtc != NULL to support legacy drivers v2: * rename helper to drm_crtc_vblank_helper_get_vblank_timestamp() * replace drm_calc_vbltimestamp_from_scanoutpos() with drm_crtc_vblank_helper_get_vblank_timestamp() in docs Signed-off-by:
-
Thomas Zimmermann authored
The new callback get_scanout_position() reads the current location of the scanout process. The operation is currently located in struct drm_driver, but really belongs to the CRTC. Drivers will be converted in separate patches. To help with the conversion, the timestamp calculation has been moved from drm_calc_vbltimestamp_from_scanoutpos() to drm_crtc_vblank_helper_get_vblank_timestamp_internal(). The helper function supports the new and old interface of get_scanout_position(). drm_calc_vbltimestamp_from_scanoutpos() remains as a wrapper around the new function. Callback functions return the scanout position from the CRTC. The legacy version of the interface receives the device and pipe index, the modern version receives a pointer to the CRTC. We keep the legacy version until all drivers have been converted. v4: * 80-character line fixes v3: * refactor drm_calc_vbltimestamp_from_scanoutpos() to minimize code duplication * define types for get_scanout_position() callbacks v2: * fix logical op in drm_calc_vbltimestamp_from_scanoutpos() Signed-off-by:
-
Thomas Zimmermann authored
VBLANK interrupts can be disabled immediately or with a delay, where the latter is the default. The former option can be selected by setting get_vblank_timestamp and enabling vblank_disable_immediate in struct drm_device. Simplify the code in preparation of the removal of struct drm_device.get_vblank_timestamp. v3: * remove internal setup of vblank_disable_immediate Signed-off-by:
-
Gerd Hoffmann authored
Add missing virtio_gpu_array_lock_resv() call. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200211135047.22261-3-kraxel@redhat.com
-
Gerd Hoffmann authored
Lockdep says we can't call vmemdup() while having objects reserved because it needs the mmap semaphore. So reorder the calls reserve the objects later. Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertenly introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200212193344.GA27929@embeddedorSigned-off-by:
-
Zhihui Chen authored
Add gamma_set function, and we can also use it to adjust the brightness of the display. Signed-off-by:
Zhihui Chen <chenzhihui4@huawei.com> Signed-off-by:
Xinliang Liu <xinliang.liu@linaro.org> Acked-by:
-
Zhihui Chen authored
add DPMS function to turn on/off signal of monitor Signed-off-by:
-
Zhihui Chen authored
both crtc_state->adjusted_mode.hdisplay and crtc_state->adjusted_mode.vdisplay are 0 when switch dpms off, return -EINVAL cause switch dpms off fail. Signed-off-by:
-
Douglas Anderson authored
Based on work by Bjorn Andersson <bjorn.andersson@linaro.org>, Jeffrey Hugo <jeffrey.l.hugo@gmail.com>, and Rob Clark <robdclark@chromium.org>. Let's read the SUPPORTED_LINK_RATES and/or MAX_LINK_RATE (depending on the eDP version of the sink) to figure out what eDP rates are supported and pick the ideal one. NOTE: I have only personally tested this code on eDP panels that are 1.3 or older. Code reading SUPPORTED_LINK_RATES for DP 1.4+ was tested by hacking the code to pretend that a table was there. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218143416.v3.9.Ib59207b66db377380d13748752d6fce5596462c5@changeid
-
Douglas Anderson authored
If we fail training at a lower DP link rate let's now keep trying until we run out of rates to try. Basically the algorithm here is to start at the link rate that is the theoretical minimum and then slowly bump up until we run out of rates or hit the max rate of the sink. We query the sink using a DPCD read. This is, in fact, important in practice. Specifically at least one panel hooked up to the bridge (AUO B116XAK01) had a theoretical min rate more than 1.62 GHz (if run at 24 bpp) and fails to train at the next rate (2.16 GHz). It would train at 2.7 GHz, though. Signed-off-by:
-
Douglas Anderson authored
We'll re-organize the ti_sn_bridge_enable() function a bit to group together all the parts relating to link training and split them into a sub-function. This is not intended to have any functional change and is in preparation for trying link training several times at different rates. One small side effect here is that if link training fails we'll now leave the DP PLL disabled, but that seems like a sane thing to do. Signed-off-by:
-
Douglas Anderson authored
The current bridge driver always forced us to use 24 bits per pixel over the DP link. This is a waste if you are hooked up to a panel that only supports 6 bits per color or fewer, since in that case you can run at 18 bits per pixel and thus end up at a lower DP clock rate. Let's support this. While at it, let's clean up the math in the function to avoid rounding errors (and round in the correct direction when we have to round). Numbers are sufficiently small (because mode->clock is in kHz) that we don't need to worry about integer overflow. Signed-off-by:
-
Douglas Anderson authored
At least one panel hooked up to the bridge (AUO B116XAK01) only supports 1 lane of DP. Let's read this information and stop hardcoding 4 DP lanes. Signed-off-by:
-
Douglas Anderson authored
The driver used to say that the value to program into bridge register 0x93 was dp_lanes - 1. Looking at the datasheet for the bridge, this is wrong. The data sheet says: * 1 = 1 lane * 2 = 2 lanes * 3 = 4 lanes A more proper way to express this encoding is min(dp_lanes, 3). At the moment this change has zero effect because we've hardcoded the number of DP lanes to 4. ...and (4 - 1) == min(4, 3). How fortunate! ...but soon we'll stop hardcoding the number of lanes. Signed-off-by:
-
Douglas Anderson authored
The ti-sn65dsi86 is a bridge from MIPI to DP and thus has two links: the MIPI link and the DP link. The two links do not need to have the same format or number of lanes. Stop using MIPI variables when talking about the DP link. This has zero functional change because: * currently we are hardcoding the MIPI link as unpacked RGB888 which requires 24 bits and currently we are not changing the DP link rate from the bridge's default of 8 bits per pixel. * currently we are hardcoding both the MIPI and DP as being 4 lanes. This is all in prep for fixing some of the above. Signed-off-by:
-
Douglas Anderson authored
When we iterate over ti_sn_bridge_dp_rate_lut, there's no reason to start at index 0 which always contains the value 0. 0 is not a valid link rate. This change should have no real effect but is a small cleanup. Signed-off-by:
-
Douglas Anderson authored
These two things were in one function. Split into two. This looks like it's duplicating some code, but don't worry. This is is just in preparation for future changes. This is intended to have zero functional change and will just make future patches easier to understand. Signed-off-by:
-
- 12 Feb, 2020 6 commits
-
-
Christian König authored
This allows release_notify to add and remove fences from deleted objects. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
xinhui pan <xinhui.pan@amd.com> Link: https://patchwork.freedesktop.org/patch/352750/
-
Christian König authored
When non-imported BOs are resurrected for delayed delete we replace the dma_resv object to allow for easy reclaiming of the resources. v2: move that to ttm_bo_individualize_resv v3: add a comment to explain what's going on Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/352927/
-
Christian König authored
This patch reworks the whole delayed deletion of BOs which aren't idle. Instead of having two counters for the BO structure we resurrect the BO when we find that a deleted BO is not idle yet. This has many advantages, especially that we don't need to increment/decrement the BOs reference counter any more when it moves on the LRUs. v2: remove duplicate ttm_tt_destroy, fix holde lock for LRU move Signed-off-by:
-
Gerd Hoffmann authored
Split virtio_gpu_deinit(), move the drm shutdown and release to virtio_gpu_release(). Drop vqs_ready variable, instead use drm_dev_{enter,exit,unplug} to avoid touching hardware after device removal. Tidy up here and there. v4: add changelog. v3: use drm_dev_*(). Signed-off-by: -
Gerd Hoffmann authored
Move final cleanups from cirrus_pci_remove() to the new callback. Add drm_atomic_helper_shutdown() call to cirrus_pci_remove(). Use drm_dev_{enter,exit,unplug} to avoid touching hardware after device removal. v4: add changelog. v3: use drm_dev*. v2: stop touching hardware after pci_remove(). Signed-off-by: -
Gerd Hoffmann authored
Call bochs_unload via drm_driver.release to make sure we release stuff when it is safe to do so. Use drm_dev_{enter,exit,unplug} to avoid touching hardware after device removal. Tidy up here and there. v4: add changelog. v3: use drm_dev_*(). v2: move hardware deinit to pci_remove(). Signed-off-by:
-
- 11 Feb, 2020 3 commits
-
-
Jani Nikula authored
There is no real reason to require drivers to set and use dev->dev_private. Indeed, the current recommendation, as documented in drm_device.h, is to embed struct drm_device in the per-device struct instead of using dev_private. Remove the requirement for dev_private to have been set to indicate driver initialization. For background, quoting Daniel Vetter: Now there might be some hilarious races this papers over, but: - Proper drivers should only call drm_dev_register once everything is set up, including this stuff here. No race possible with anything else really. - Slightly more wobbly drivers, including the legacy ones, all use drm_global_mutex. This was the former BKL, which means that it was impossible for soeone to go through the load/unload/reload (between lastclose and firstopen) paths and also run the ioctl. But the ioctl had to be made unlocked because blocking there killed X: commit 8f4ff2b0 Author: Ilija Hadzic <ihadzic@research.bell-labs.com> Date: Mon Oct 31 17:46:18 2011 -0400 drm: do not sleep on vblank while holding a mutex The even more legacy DRM_CONTROL ioctl stayed fully locked. But the file open/close paths are still fully locked, and that's the only place legacy drivers should call drm_irq_install/uninstall, so should all still be fully ordered and protected and happy. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
-
Jyri Sarha authored
Add support for Rocktech RK101II01D-CT, 10.1" 1280x800 TFT with LVDS interface, LED backlight and integrated Goodix GT928 capacitive touch panel. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/b543b77d8af7cbbef852d3df4595f11ac1aa0046.1581423249.git.jsarha@ti.com
-
Jyri Sarha authored
Add compatible to panel-simple for Rocktech Displays Limited RK101II01D-CT 10.1" TFT 1280x800 Pixels with LVDS interface, LED Backlight, and capacitive touch panel ("goodix,gt928" compatible). Signed-off-by:
-
