1. 24 Nov, 2010 9 commits
    • Samu Onkalo's avatar
      drivers/leds/leds-lp5523.c: change some macros to functions · 87dbf623
      Samu Onkalo authored
      A small macro changed to inline function to have proper type checking.
      Inline added to two similar small functions.
      Signed-off-by: default avatarSamu Onkalo <samu.p.onkalo@nokia.com>
      Cc: Richard Purdie <rpurdie@rpsys.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      87dbf623
    • Samu Onkalo's avatar
      drivers/leds/leds-lp5521.c: change some macros to functions · 9fdb18b6
      Samu Onkalo authored
      Some small macros changed to inline functions to have proper type
      checking.
      Signed-off-by: default avatarSamu Onkalo <samu.p.onkalo@nokia.com>
      Cc: Richard Purdie <rpurdie@rpsys.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9fdb18b6
    • Ken Sumrall's avatar
      fuse: fix attributes after open(O_TRUNC) · a0822c55
      Ken Sumrall authored
      The attribute cache for a file was not being cleared when a file is opened
      with O_TRUNC.
      
      If the filesystem's open operation truncates the file ("atomic_o_trunc"
      feature flag is set) then the kernel should invalidate the cached st_mtime
      and st_ctime attributes.
      
      Also i_size should be explicitly be set to zero as it is used sometimes
      without refreshing the cache.
      Signed-off-by: default avatarKen Sumrall <ksumrall@android.com>
      Cc: Anfei <anfei.zhou@gmail.com>
      Cc: "Anand V. Avati" <avati@gluster.com>
      Signed-off-by: default avatarMiklos Szeredi <miklos@szeredi.hu>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a0822c55
    • Robin@sgi.com's avatar
      sgi-xpc: XPC fails to discover partitions with all nasids above 128 · c22c7aef
      Robin@sgi.com authored
      UV hardware defines 256 memory protection regions versus the baseline 64
      with increasing size for the SN2 ia64.  This was overlooked when XPC was
      modified to accomodate both UV and SN2.
      
      Without this patch, a user could reconfigure their existing system and
      suddenly disable cross-partition communications with no indication of what
      has gone wrong.  It also prevents larger configurations from using
      cross-partition communication.
      Signed-off-by: default avatarRobin Holt <holt@sgi.com>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c22c7aef
    • Kirill A. Shutemov's avatar
      memcg: fix false positive VM_BUG on non-SMP · 112bc2e1
      Kirill A. Shutemov authored
      Fix this:
      
        kernel BUG at mm/memcontrol.c:2155!
        invalid opcode: 0000 [#1]
        last sysfs file:
      
        Pid: 18, comm: sh Not tainted 2.6.37-rc3 #3 /Bochs
        EIP: 0060:[<c10731b2>] EFLAGS: 00000246 CPU: 0
        EIP is at mem_cgroup_move_account+0xe2/0xf0
        EAX: 00000004 EBX: c6f931d4 ECX: c681c300 EDX: c681c000
        ESI: c681c300 EDI: ffffffea EBP: c681c000 ESP: c46f3e30
         DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
        Process sh (pid: 18, ti=c46f2000 task=c6826e60 task.ti=c46f2000)
        Stack:
         00000155 c681c000 0805f000 c46ee180 c46f3e5c c7058820 c1074d37 00000000
         08060000 c46db9a0 c46ec080 c7058820 0805f000 08060000 c46f3e98 c1074c50
         c106c75e c46f3e98 c46ec080 08060000 0805ffff c46db9a0 c46f3e98 c46e0340
        Call Trace:
         [<c1074d37>] ? mem_cgroup_move_charge_pte_range+0xe7/0x130
         [<c1074c50>] ? mem_cgroup_move_charge_pte_range+0x0/0x130
         [<c106c75e>] ? walk_page_range+0xee/0x1d0
         [<c10725d6>] ? mem_cgroup_move_task+0x66/0x90
         [<c1074c50>] ? mem_cgroup_move_charge_pte_range+0x0/0x130
         [<c1072570>] ? mem_cgroup_move_task+0x0/0x90
         [<c1042616>] ? cgroup_attach_task+0x136/0x200
         [<c1042878>] ? cgroup_tasks_write+0x48/0xc0
         [<c1041e9e>] ? cgroup_file_write+0xde/0x220
         [<c101398d>] ? do_page_fault+0x17d/0x3f0
         [<c108a79d>] ? alloc_fd+0x2d/0xd0
         [<c1041dc0>] ? cgroup_file_write+0x0/0x220
         [<c1077ba2>] ? vfs_write+0x92/0xc0
         [<c1077c81>] ? sys_write+0x41/0x70
         [<c1140e3d>] ? syscall_call+0x7/0xb
        Code: 03 00 74 09 8b 44 24 04 e8 1c f1 ff ff 89 73 04 8d 86 b0 00 00 00 b9 01 00 00 00 89 da 31 ff e8 65 f5 ff ff e9 4d ff ff ff 0f 0b <0f> 0b 0f 0b 0f 0b 90 8d b4 26 00 00 00 00 83 ec 10 8b 0d f4 e3
        EIP: [<c10731b2>] mem_cgroup_move_account+0xe2/0xf0 SS:ESP 0068:c46f3e30
        ---[ end trace 7daa1582159b6532 ]---
      
      lock_page_cgroup and unlock_page_cgroup are implemented using
      bit_spinlock.  bit_spinlock doesn't touch the bit if we are on non-SMP
      machine, so we can't use the bit to check whether the lock was taken.
      
      Let's introduce is_page_cgroup_locked based on bit_spin_is_locked instead
      of PageCgroupLocked to fix it.
      
      [akpm@linux-foundation.org: s/is_page_cgroup_locked/page_is_cgroup_locked/]
      Signed-off-by: default avatarKirill A. Shutemov <kirill@shutemov.name>
      Reviewed-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Acked-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      112bc2e1
    • Will Newton's avatar
      uml: disable winch irq before freeing handler data · 69e83dad
      Will Newton authored
      Disable the winch irq early to make sure we don't take an interrupt part
      way through the freeing of the handler data, resulting in a crash on
      shutdown:
      
        winch_interrupt : read failed, errno = 9
        fd 13 is losing SIGWINCH support
        ------------[ cut here ]------------
        WARNING: at lib/list_debug.c:48 list_del+0xc6/0x100()
        list_del corruption, next is LIST_POISON1 (00100100)
        082578c8:  [<081fd77f>] dump_stack+0x22/0x24
        082578e0:  [<0807a18a>] warn_slowpath_common+0x5a/0x80
        08257908:  [<0807a23e>] warn_slowpath_fmt+0x2e/0x30
        08257920:  [<08172196>] list_del+0xc6/0x100
        08257940:  [<08060244>] free_winch+0x14/0x80
        08257958:  [<080606fb>] winch_interrupt+0xdb/0xe0
        08257978:  [<080a65b5>] handle_IRQ_event+0x35/0xe0
        08257998:  [<080a8717>] handle_edge_irq+0xb7/0x170
        082579bc:  [<08059bc4>] do_IRQ+0x34/0x50
        082579d4:  [<08059e1b>] sigio_handler+0x5b/0x80
        082579ec:  [<0806a374>] sig_handler_common+0x44/0xb0
        08257a68:  [<0806a538>] sig_handler+0x38/0x50
        08257a78:  [<0806a77c>] handle_signal+0x5c/0xa0
        08257a9c:  [<0806be28>] hard_handler+0x18/0x20
        08257aac:  [<00c14400>] 0xc14400
      Signed-off-by: default avatarWill Newton <will.newton@gmail.com>
      Acked-by: default avatarWANG Cong <xiyou.wangcong@gmail.com>
      Cc: Jeff Dike <jdike@addtoit.com>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      69e83dad
    • Steven J. Magnani's avatar
      nommu: yield CPU while disposing VM · 04c34961
      Steven J. Magnani authored
      Depending on processor speed, page size, and the amount of memory a
      process is allowed to amass, cleanup of a large VM may freeze the system
      for many seconds.  This can result in a watchdog timeout.
      
      Make sure other tasks receive some service when cleaning up large VMs.
      Signed-off-by: default avatarSteven J. Magnani <steve@digidescorp.com>
      Cc: Greg Ungerer <gerg@snapgear.com>
      Reviewed-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      04c34961
    • Loïc Minier's avatar
      include/linux/fs.h: fix userspace build · 3a3a1af3
      Loïc Minier authored
      dpkg uses fiemap but didn't particularly need to include stdint.h so far.
      Since 367a51a3 ("fs: Add FITRIM ioctl"), build of linux/fs.h failed in
      dpkg with:
      
        In file included from ../../src/filesdb.c:27:0:
        /usr/include/linux/fs.h:37:2: error: expected specifier-qualifier-list before 'uint64_t'
      
      Use exportable type __u64 to avoid the dependency on stdint.h.
      
      b31d42a5 ("Fix compile brekage with !CONFIG_BLOCK") fixed only the
      kernel build by including linux/types.h, but this also fixed "make
      headers_check", so don't revert it.
      Signed-off-by: default avatarLoïc Minier <loic.minier@linaro.org>
      Tested-by: default avatarArnd Bergmann <arnd.bergmann@linaro.org>
      Cc: Lukas Czerner <lczerner@redhat.com>
      Cc: Dmitry Monakhov <dmonakhov@openvz.org>
      Cc: Theodore Ts'o <tytso@mit.edu>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3a3a1af3
    • Steven Rostedt's avatar
      leds: fix bug with reading NAS SS4200 dmi code · 50d431e8
      Steven Rostedt authored
      While running randconfg with ktest.pl I stumbled upon this bug:
      
        BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
        IP: [<ffffffff815fe44f>] strstr+0x39/0x86
        PGD 0
        Oops: 0000 [#1] SMP
        last sysfs file:
        CPU 0
        Modules linked in:
      
        Pid: 1, comm: swapper Not tainted 2.6.37-rc1-test+ #6 DG965MQ/
        RIP: 0010:[<ffffffff815fe44f>]  [<ffffffff815fe44f>] strstr+0x39/0x86
        RSP: 0018:ffff8800797cbd80  EFLAGS: 00010213
        RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffffffffffff
        RDX: 0000000000000000 RSI: ffffffff82eb7ac9 RDI: 0000000000000003
        RBP: ffff8800797cbda0 R08: ffff880000000003 R09: 0000000000030725
        R10: ffff88007d294c00 R11: 0000000000014c00 R12: 0000000000000020
        R13: ffffffff82eb7ac9 R14: ffffffffffffffff R15: ffffffff82eb7b08
        FS:  0000000000000000(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000
        CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
        CR2: 0000000000000003 CR3: 0000000002a1d000 CR4: 00000000000006f0
        DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
        DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
        Process swapper (pid: 1, threadinfo ffff8800797ca000, task ffff8800797d0000)
        Stack:
         00000000000000ba ffffffff82eb7ac9 ffffffff82eb7ab8 00000000000000ba
         ffff8800797cbdf0 ffffffff81e2050f ffff8800797cbdc0 00000000815f913b
         ffff8800797cbe00 ffffffff82eb7ab8 0000000000000000 0000000000000000
        Call Trace:
         [<ffffffff81e2050f>] dmi_matches+0x117/0x154
         [<ffffffff81e205d7>] dmi_check_system+0x3d/0x8d
         [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8
         [<ffffffff82e1ad49>] nas_gpio_init+0x24/0x2c8
         [<ffffffff820d750d>] ? wm8350_led_init+0x0/0x20
         [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8
         [<ffffffff810022f7>] do_one_initcall+0xab/0x1b2
         [<ffffffff82da749c>] kernel_init+0x248/0x331
         [<ffffffff8100e624>] kernel_thread_helper+0x4/0x10
         [<ffffffff82da7254>] ? kernel_init+0x0/0x331
      
      Found that the nas_led_whitelist dmi_system_id structure array had no
      NULL end delimiter, causing the dmi_check_system() loop to read an
      undefined entry.
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      Acked-by: default avatarDave Hansen <dave@sr71.net>
      Acked-by: default avatarRichard Purdie <rpurdie@linux.intel.com>
      Acked-by: default avatarArjan van de Ven <arjan@linux.intel.com>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      50d431e8
  2. 23 Nov, 2010 10 commits
  3. 22 Nov, 2010 18 commits
    • Jeremy Fitzhardinge's avatar
      Merge branches 'upstream/core', 'upstream/xenfs' and 'upstream/evtchn' into upstream/for-linus · 9b832153
      Jeremy Fitzhardinge authored
      * upstream/core:
        xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.
        xen: set IO permission early (before early_cpu_init())
        xen: re-enable boot-time ballooning
        xen/balloon: make sure we only include remaining extra ram
        xen/balloon: the balloon_lock is useless
        xen: add extra pages to balloon
        xen/events: use locked set|clear_bit() for cpu_evtchn_mask
        xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore
        xen: implement XENMEM_machphys_mapping
      
      * upstream/xenfs:
        Revert "xen/privcmd: create address space to allow writable mmaps"
        xen/xenfs: update xenfs_mount for new prototype
        xen: fix header export to userspace
        xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
        xen: xenfs: privcmd: check put_user() return code
      
      * upstream/evtchn:
        xen: make evtchn's name less generic
        xen/evtchn: the evtchn device is non-seekable
        xen/evtchn: add missing static
        xen/evtchn: Fix name of Xen event-channel device
        xen/evtchn: don't do unbind_from_irqhandler under spinlock
        xen/evtchn: remove spurious barrier
        xen/evtchn: ports start enabled
        xen/evtchn: dynamically allocate port_user array
        xen/evtchn: track enabled state for each port
      9b832153
    • Konrad Rzeszutek Wilk's avatar
      xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs. · 12334715
      Konrad Rzeszutek Wilk authored
      When we allocate a vector for MSI/MSI-X we save away the PIRQ, and the
      vector value. When we unmap (de-allocate) the MSI/MSI-X vector(s) we
      need to provide the PIRQ and the vector value. What we did instead
      was to provide the GSI (which was zero) and the vector value, and we
      got these unhappy error messages:
      
      (XEN) irq.c:1575: dom0: pirq 0 not mapped
      [    7.733415] unmap irq failed -22
      
      This patches fixes this and we use the PIRQ value instead of the GSI
      value.
      
      CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      12334715
    • Konrad Rzeszutek Wilk's avatar
      xen: set IO permission early (before early_cpu_init()) · ec35a69c
      Konrad Rzeszutek Wilk authored
      This patch is based off "xen dom0: Set up basic IO permissions for dom0."
      by Juan Quintela <quintela@redhat.com>.
      
      On AMD machines when we boot the kernel as Domain 0 we get this nasty:
      
      mapping kernel into physical memory
      Xen: setup ISA identity maps
      about to get started...
      (XEN) traps.c:475:d0 Unhandled general protection fault fault/trap [#13] on VCPU 0 [ec=0000]
      (XEN) domain_crash_sync called from entry.S
      (XEN) Domain 0 (vcpu#0) crashed on cpu#0:
      (XEN) ----[ Xen-4.1-101116  x86_64  debug=y  Not tainted ]----
      (XEN) CPU:    0
      (XEN) RIP:    e033:[<ffffffff8130271b>]
      (XEN) RFLAGS: 0000000000000282   EM: 1   CONTEXT: pv guest
      (XEN) rax: 000000008000c068   rbx: ffffffff8186c680   rcx: 0000000000000068
      (XEN) rdx: 0000000000000cf8   rsi: 000000000000c000   rdi: 0000000000000000
      (XEN) rbp: ffffffff81801e98   rsp: ffffffff81801e50   r8:  ffffffff81801eac
      (XEN) r9:  ffffffff81801ea8   r10: ffffffff81801eb4   r11: 00000000ffffffff
      (XEN) r12: ffffffff8186c694   r13: ffffffff81801f90   r14: ffffffffffffffff
      (XEN) r15: 0000000000000000   cr0: 000000008005003b   cr4: 00000000000006f0
      (XEN) cr3: 0000000221803000   cr2: 0000000000000000
      (XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
      (XEN) Guest stack trace from rsp=ffffffff81801e50:
      
      RIP points to read_pci_config() function.
      
      The issue is that we don't set IO permissions for the Linux kernel early enough.
      
      The call sequence used to be:
      
          xen_start_kernel()
      	x86_init.oem.arch_setup = xen_setup_arch;
              setup_arch:
                 - early_cpu_init
                     - early_init_amd
                        - read_pci_config
                 - x86_init.oem.arch_setup [ xen_arch_setup ]
                     - set IO permissions.
      
      We need to set the IO permissions earlier on, which this patch does.
      Acked-by: default avatarJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      ec35a69c
    • David Daney's avatar
      of/phylib: Use device tree properties to initialize Marvell PHYs. · cf41a51d
      David Daney authored
      Some aspects of PHY initialization are board dependent, things like
      indicator LED connections and some clocking modes cannot be determined
      by probing.  The dev_flags element of struct phy_device can be used to
      control these things if an appropriate value can be passed from the
      Ethernet driver.  We run into problems however if the PHY connections
      are specified by the device tree.  There is no way for the Ethernet
      driver to know what flags it should pass.
      
      If we are using the device tree, the struct phy_device will be
      populated with the device tree node corresponding to the PHY, and we
      can extract extra configuration information from there.
      
      The next question is what should the format of that information be?
      It is highly device specific, and the device tree representation
      should not be tied to any arbitrary kernel defined constants.  A
      straight forward representation is just to specify the exact bits that
      should be set using the "marvell,reg-init" property:
      
            phy5: ethernet-phy@5 {
              reg = <5>;
              compatible = "marvell,88e1149r";
              marvell,reg-init =
                      /* led[0]:1000, led[1]:100, led[2]:10, led[3]:tx */
                      <3 0x10 0 0x5777>, /* Reg 3,16 <- 0x5777 */
                      /* mix %:0, led[0123]:drive low off hiZ */
                      <3 0x11 0 0x00aa>, /* Reg 3,17 <- 0x00aa */
                      /* default blink periods. */
                      <3 0x12 0 0x4105>, /* Reg 3,18 <- 0x4105 */
                      /* led[4]:rx, led[5]:dplx, led[45]:drive low off hiZ */
                      <3 0x13 0 0x0a60>; /* Reg 3,19 <- 0x0a60 */
            };
      
            phy6: ethernet-phy@6 {
              reg = <6>;
              compatible = "marvell,88e1118";
              marvell,reg-init =
                      /* Fix rx and tx clock transition timing */
                      <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
                      /* Adjust LED drive. */
                      <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
                      /* irq, blink-activity, blink-link */
                      <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
            };
      
      The Marvell PHYs have a page select register at register 22 (0x16), we
      can specify any register by its page and register number.  These are
      the first and second word.  The third word contains a mask to be ANDed
      with the existing register value, and the fourth word is ORed with the
      result to yield the new register value.  The new marvell_of_reg_init
      function leaves the page select register unchanged, so a call to it
      can be dropped into the .config_init functions without unduly
      affecting the state of the PHY.
      
      If CONFIG_OF_MDIO is not set, there is no of_node, or no
      "marvell,reg-init" property, the PHY initialization is unchanged.
      Signed-off-by: default avatarDavid Daney <ddaney@caviumnetworks.com>
      Cc: Grant Likely <grant.likely@secretlab.ca>
      Cc: Cyril Chemparathy <cyril@ti.com>
      Cc: David Daney <ddaney@caviumnetworks.com>
      Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Reviewed-by: default avatarGrant Likely <grant.likely@secretlab.ca>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf41a51d
    • David Daney's avatar
      phylib: Add support for Marvell 88E1149R devices. · 90600732
      David Daney authored
      The 88E1149R is 10/100/1000 quad-gigabit Ethernet PHY.  The
      .config_aneg function can be shared with 88E1118, but it needs its own
      .config_init.
      Signed-off-by: default avatarDavid Daney <ddaney@caviumnetworks.com>
      Cc: Cyril Chemparathy <cyril@ti.com>
      Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Wolfram Sang <w.sang@pengutronix.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      90600732
    • David Daney's avatar
      phylib: Use common page register definition for Marvell PHYs. · 27d916d6
      David Daney authored
      The definition of the Marvell PHY page register is not specific to
      88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it
      throughout.
      Suggested-by: default avatarCyril Chemparathy <cyril@ti.com>
      Signed-off-by: default avatarDavid Daney <ddaney@caviumnetworks.com>
      Cc: Cyril Chemparathy <cyril@ti.com>
      Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      27d916d6
    • Sonny Rao's avatar
      qlge: Fix incorrect usage of module parameters and netdev msg level · 84cf7029
      Sonny Rao authored
      Driver appears to be mistaking the permission field with default value
      in the case of debug and qlge_irq_type.
      
      Driver is also passing debug as a bitmask into netif_msg_init()
      which wants a number of bits.  Ron Mercer suggests we should
      change this to pass in -1 so the defaults get used instead,
      which makes the default much less verbose.
      Signed-off-by: default avatarMilton Miller <miltonm@bga.com>
      Signed-off-by: default avatarSonny Rao <sonnyrao@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      84cf7029
    • John Fastabend's avatar
      ipv6: fix missing in6_ifa_put in addrconf · 88b2a9a3
      John Fastabend authored
      Fix ref count bug introduced by
      
      commit 2de79570
      Author: Lorenzo Colitti <lorenzo@google.com>
      Date:   Wed Oct 27 18:16:49 2010 +0000
      
      ipv6: addrconf: don't remove address state on ifdown if the address
      is being kept
      
      Fix logic so that addrconf_ifdown() decrements the inet6_ifaddr
      refcnt correctly with in6_ifa_put().
      Reported-by: default avatarStephen Hemminger <shemminger@vyatta.com>
      Signed-off-by: default avatarJohn Fastabend <john.r.fastabend@intel.com>
      Acked-by: default avatarEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      88b2a9a3
    • Kailang Yang's avatar
      ALSA: hda - Fixed ALC887-VD initial error · 01e0f137
      Kailang Yang authored
      ALC887-VD is like ALC888-VD. It can not be initialized as ALC882.
      Signed-off-by: default avatarKailang Yang <kailang@realtek.com>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      01e0f137
    • Takashi Iwai's avatar
      ALSA: atmel - Fix the return value in error path · 1beded5d
      Takashi Iwai authored
      In the commit c0763e68
          ALSA: snd-atmel-abdac: test wrong variable
      the return value via PTR_ERR() had to be fixed as well.
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      1beded5d
    • Daniel T Chen's avatar
      ALSA: hda: Use hp-laptop quirk to enable headphones automute for Asus A52J · 673f7a89
      Daniel T Chen authored
      BugLink: https://launchpad.net/bugs/677652
      
      The original reporter states that, in 2.6.35, headphones do not appear
      to work, nor does inserting them mute the A52J's onboard speakers.  Upon
      inspecting the codec dump, it appears that the newly committed hp-laptop
      quirk will suffice to enable this basic functionality.  Testing was done
      with an alsa-driver build from 2010-11-21.
      
      Reported-and-tested-by: Joan Creus
      Cc: <stable@kernel.org> [2.6.35+]
      Signed-off-by: default avatarDaniel T Chen <crimsun@ubuntu.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      673f7a89
    • Vasiliy Kulikov's avatar
      ALSA: snd-atmel-abdac: test wrong variable · c0763e68
      Vasiliy Kulikov authored
      After clk_get() pclk is checked second time instead of sample_clk check.
      Signed-off-by: default avatarVasiliy Kulikov <segoon@openwall.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      c0763e68
    • Andreas Mohr's avatar
      ALSA: azt3328: period bug fix (for PA), add missing ACK on stop timer · 78ac07b0
      Andreas Mohr authored
      . Fix PulseAudio "ALSA driver bug" issue
        (if we have two alternated areas within a 64k DMA buffer, then max
        period size should obviously be 32k only).
        Back references:
         http://pulseaudio.org/wiki/AlsaIssues
         http://fedoraproject.org/wiki/Features/GlitchFreeAudio
      . In stop timer function, need to supply ACK in the timer control byte.
      . Minor log output correction
      
      When I did my first PA testing recently, the period size bug resulted
      in quite precisely observeable half-period-based playback distortion.
      
      PA-based operation is quite a bit more underrun-prone (despite its
      zero-copy optimizations etc.) than raw ALSA with this rather spartan
      sound hardware implementation on my puny Athlon.
      
      Note that even with this patch, azt3328 still doesn't work for both
      cases yet, PA tsched=0 and tsched
      (on tsched=0 it will playback tiny fragments of periods, leading to tiny
      stuttering sounds with some pauses in between, whereas with
      timer-scheduled operation playback works fine - minus some quite increased
      underrun trouble on PA vs. ALSA, that is).
      Signed-off-by: default avatarAndreas Mohr <andi@lisas.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      78ac07b0
    • Daniel T Chen's avatar
      ALSA: hda: Add Samsung R720 SSID for subwoofer pin fixup · a0e90acc
      Daniel T Chen authored
      BugLink: https://launchpad.net/bugs/677830
      
      The original reporter states that the subwoofer does not mute when
      inserting headphones.  We need an entry for his machine's SSID in the
      subwoofer pin fixup list, so add it there (verified using hda_analyzer).
      
      Reported-and-tested-by: i-NoD
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarDaniel T Chen <crimsun@ubuntu.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      a0e90acc
    • Joe Perches's avatar
    • Joe Perches's avatar
      c80c1d54
    • Joe Perches's avatar
      ALSA: sound/ppc: Use printf extension %pR for struct resource · 2fb50f13
      Joe Perches authored
      Using %pR standardizes the struct resource output.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      2fb50f13
    • Daniel T Chen's avatar
      ALSA: ac97: Apply quirk for Dell Latitude D610 binding Master and Headphone controls · 0613a594
      Daniel T Chen authored
      BugLink: https://launchpad.net/bugs/669279
      
      The original reporter states: "The Master mixer does not change the
      volume from the headphone output (which is affected by the headphone
      mixer). Instead it only seems to control the on-board speaker volume.
      This confuses PulseAudio greatly as the Master channel is merged into
      the volume mix."
      
      Fix this symptom by applying the hp_only quirk for the reporter's SSID.
      The fix is applicable to all stable kernels.
      Reported-and-tested-by: default avatarBen Gamari <bgamari@gmail.com>
      Cc: <stable@kernel.org> [2.6.32+]
      Signed-off-by: default avatarDaniel T Chen <crimsun@ubuntu.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      0613a594
  4. 21 Nov, 2010 3 commits