- 15 Dec, 2011 14 commits
-
-
Giridhar Malavali authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Giridhar Malavali authored
Signed-off-by:
-
Andrew Vasquez authored
The 'continue' cases neglected to place the thread in an interruptible state, causing the DPC routine to wake immediately. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
When reading the incoming mailbox registers, read only the specified ones. Signed-off-by:
-
Giridhar Malavali authored
[jejb: fixed up checkpatch and casting errors] Signed-off-by:
-
Chad Dupuis authored
This patch contains minor fixes to our new logging infrastructure: - Remove extranous messages. - Re-add 'nexus' and 'hdl' information. - Adjusted the message ids to fill up the holes. - Display FCP_CMND priority on update. - Log only mail box error conditions. - Do not print "Firmware ready **** FAILED ****" if cable is unplugged. - Drop noisy 'fw_state...curr time...' message. - Correct nexus display during abort. - Add a special case error-logging set to '1'. - Catagorize I/O exception display handling. - Correct the bsg msg code printing. - Dont use dynamic logging after host is removed. Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Joe Perches authored
[SCSI] qla2xxx: Make the logging functions verify their arguments and fixed the current broken uses as appropriate. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Return early when logging level too low. Use normal kernel codeing style for function braces. Add const where appropriate to logging functions. Remove now unused #define QL_DBG_BUF_LEN. Signed-off-by:
-
Jing Huang authored
Fix some endian issue. __BIGENDIAN is not defined and it needs to be replaced with __BIG_ENDIAN. Also fixed a bug in bit field access. These two issues were reported by Dan Carpenter. Signed-off-by:
Jing Huang <huangj@brocade.com> Signed-off-by:
-
Jing Huang authored
Fixed code indentation and alignment issues. Fixed all checkpatch warnings. Signed-off-by:
-
Moger, Babu authored
All the handlers have now implemented the match function so We don't need to use scsi_dev_info any more for matching purposes. Signed-off-by:
Babu Moger <babu.moger@netapp.com> Acked-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Moger, Babu authored
This patch introduces the match function for rdac device handler. Without this, sometimes handler attach fails during the device_add. Included check for TPGS bit before proceeding further. The match function was introduced by commit 6c3633d0Signed-off-by:
-
Moger, Babu authored
This patch introduces the match function for hp_sw device handler. Included the check for TPGS bit before proceeding further per Hannes comment. The match function was introduced by commit 6c3633d0Signed-off-by:
-
Moger, Babu authored
This patch introduces the match function for emc device handler. Included check for TPGS bit before proceeding further. The match function was introduced by commit 6c3633d0Signed-off-by:
-
- 14 Dec, 2011 6 commits
-
-
Eddie Wai authored
During session recovery, the conn_stop call will trigger a flush to all outstanding SCSI cmds in the xmit queue. This will set all outstanding task->sc to NULL prior to the session_teardown call which frees the task memory. In the bnx2i SCSI response processing path, only the task was being checked for NULL under the session lock before the task->sc->request dereferencing. If there are outstanding SCSI cmd responses pending for process, the following kernel panic can be exposed where task->sc was found to be NULL. Call Trace: [ 69.720205] [<ffffffffa040d0d0>] bnx2i_process_new_cqes+0x290/0x3c0 [bnx2i] [ 69.804289] [<ffffffffa040d233>] bnx2i_fastpath_notification+0x33/0xa0 [bnx2 i] [ 69.891490] [<ffffffffa040d37b>] bnx2i_indicate_kcqe+0xdb/0x330 [bnx2i] [ 69.971427] [<ffffffffa03eac5e>] service_kcqes+0x16e/0x1d0 [cnic] [ 70.045132] [<ffffffffa03eacea>] cnic_service_bnx2x_kcq+0x2a/0x50 [cnic] [ 70.126105] [<ffffffffa03ead53>] cnic_service_bnx2x_bh+0x43/0x140 [cnic] [ 70.207081] [<ffffffff81060676>] tasklet_action+0x66/0x110 [ 70.273521] [<ffffffff8106025f>] __do_softirq+0xef/0x220 [ 70.337887] [<ffffffff81447ebc>] call_softirq+0x1c/0x30 This patch adds the !task->sc check and also protects the sc dereferencing under the session lock. Signed-off-by:
Eddie Wai <eddie.wai@broadcom.com> Signed-off-by:
-
Mike Christie authored
iscsi_conn_setup can fail so we must check for NULL being returned. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Tomas Henzl authored
When the qla4xxx_get_fwddb_entry returns QLA_ERROR the nex_idx is not updated, for (idx = 0; idx < max_ddbs; idx = next_idx) { ret = qla4xxx_get_fwddb_entry(ha, idx, NULL, 0, NULL, &next_idx, &state, &conn_err, NULL, NULL); if (ret == QLA_ERROR) continue; This means there is a risk that the 'idx < max_ddbs' condition will never met and the loop will loop forever. Fix this by explicitly increasing the next_idx in the error condition. Maybe a break instead of continue is more appropriate, leaving the decision on the qlogic maintainer. Signed-off-by:Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Mike Christie authored
With open-iscsi support, target entries persisted in the FLASH were not login. Added support in the qla4xxx driver to do the login on probe time to the target entries saved in the FLASH by user. With this changes upgrade to the new kernel with open-iscsi support in qla4xxx will ensure users original target entries login on driver load Signed-off-by:
Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by:
Ravi Anand <ravi.anand@qlogic.com> Signed-off-by:
-
Steffen Maier authored
zfcp_scsi_slave_destroy erroneously always tried to finish its task even if the corresponding previous zfcp_scsi_slave_alloc returned early. This can lead to kernel page faults on accessing uninitialized fields of struct zfcp_scsi_dev in zfcp_erp_lun_shutdown_wait. Take the port field of the struct to determine if slave_alloc returned early. This zfcp bug is exposed by 4e6c82b3 (in turn fixing f7c9c6bb to be compatible with 21208ae5) which can call slave_destroy for a corresponding previous slave_alloc that did not finish. This patch is based on James Bottomley's fix suggestion in http://www.spinics.net/lists/linux-scsi/msg55449.html. Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Cc: <stable@kernel.org> #2.6.38+ Signed-off-by:
-
Thomas Gleixner authored
The error exit path leaks preempt count. Add the missing put_cpu(). Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Yi Zou <yi.zou@intel.com> Cc: stable@kernel.org Signed-off-by:
-
- 12 Dec, 2011 15 commits
-
-
Chad Dupuis authored
Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Saurav Kashyap authored
[jejb: checkpatch fixes] Add more fine grain parsing of vha->loop_state to export a more accurate fc_host port_state. Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
[jejb: fixup checkpatch error] Signed-off-by:
-
Andrew Vasquez authored
We need to return QLA_FUNCTION_TIMEOUT immediately otherwise we mess up the mailbox command state machine. Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Giridhar Malavali authored
[SCSI] qla2xxx: Stop unconditional completion of mailbox commands issued in interrupt mode during firmware hang. Signed-off-by:
-
Giridhar Malavali authored
If there is an error creating multiple response queues then we need to revert the request queue mapping back to request queue 0. Signed-off-by:
-
Saurav Kashyap authored
Signed-off-by:
-
Arun Easi authored
Signed-off-by:
Arun Easi <arun.easi@qlogic.com> Signed-off-by:
-
Saurav Kashyap authored
This function can wait for 5min under certain scenarios. One of them is when the port is down from switch and bus reset is issued. The bus reset used to wait for 5 minutes for the loop and upper layer callers used to hang and give stack trace because of getting stuck for 120 sec. It is legacy code that was used when the driver used to do queuing of the commands. Signed-off-by:
-
Anton Blanchard authored
_scsih_smart_predicted_fault is called in an interrupt and therefore must allocate memory using GFP_ATOMIC. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Signed-off-by:
-
- 09 Dec, 2011 5 commits
-
-
Linus Torvalds authored
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
* git://git.samba.org/sfrench/cifs-2.6: cifs: check for NULL last_entry before calling cifs_save_resume_key cifs: attempt to freeze while looping on a receive attempt cifs: Fix sparse warning when calling cifs_strtoUCS CIFS: Add descriptions to the brlock cache functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Calling __pa() with an ioremap()ed address is invalid x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked x86/intel_mid: Kconfig select fix x86/intel_mid: Fix the Kconfig for MID selection
-
git://git.pengutronix.de/git/wsa/linux-2.6Linus Torvalds authored
* 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6: spi/gpio: fix section mismatch warning spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build spi/nuc900: Include linux/module.h spi/ath79: fix compile error due to missing include
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md: raid5 crash during degradation md/raid5: never wait for bad-block acks on failed device. md: ensure new badblocks are handled promptly. md: bad blocks shouldn't cause a Blocked status on a Faulty device. md: take a reference to mddev during sysfs access. md: refine interpretation of "hold_active == UNTIL_IOCTL". md/lock: ensure updates to page_attrs are properly locked.
-
