Pull gpio updates from Bartosz Golaszewski:
 "It's been a relatively calm release cycle and we're actually removing
  more code than we're adding.

  Summary:

   - new driver for the Toshiba Visconti platform

   - rework of interrupt handling in gpio-tegra

   - updates for GPIO selftests: we're now using the character device to
     perform the subsystem checks

   - support for a new rcar variant + some code refactoring

   - refactoring of gpio-ep93xx

   - SPDX License identifier has been updated in the uapi header so that
     userspace programs bundling it can become fully REUSE-compliant

   - improvements to pwm handling in gpio-mvebu

   - support for interrupt handling and power management for gpio-xilinx
     as well as some code refactoring

   - support for a new chip variant in gpio-pca953x

   - removal of drivers: zte xs & intel-mid and removal of leftovers
     from intel-msic

   - impovements to intel drivers pulled from Andy Shevchenko

   - improvements to the gpio-aggregator virtual GPIO driver

   - and several minor tweaks and fixes to code and documentation all
     over the place"

* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
  gpio: pcf857x: Fix missing first interrupt
  gpio: ep93xx: refactor base IRQ number
  gpio: ep93xx: refactor ep93xx_gpio_add_bank
  gpio: ep93xx: Fix typo s/hierarchial/hierarchical
  gpio: ep93xx: drop to_irq binding
  gpio: ep93xx: Fix wrong irq numbers in port F
  gpio: uapi: use the preferred SPDX license identifier
  gpio: gpio-xilinx: Add check if width exceeds 32
  gpio: gpio-xilinx: Add support for suspend and resume
  gpio: gpio-xilinx: Add interrupt support
  gpio: gpio-xilinx: Reduce spinlock array to array
  gpio: gpio-xilinx: Simplify with dev_err_probe()
  gpio: msic: Drop driver from Makefile
  gpio: wcove: Split out to_ireg() helper and deduplicate the code
  gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
  gpio: wcove: Get rid of error prone casting in IRQ handler
  gpio: intel-mid: Remove driver for deprecated platform
  gpio: msic: Remove driver for deprecated platform
  gpio: aggregator: Remove trailing comma in terminator entries
  gpio: aggregator: Use compound literal from the header
  ...

Pull RTC updates from Alexandre Belloni:
 "Many cleanups and a few drivers removal this cycle.

  Subsystem:
   - Introduce features bitfield and the first feature: RTC_FEATURE_ALARM

  Removed drivers:
   - ab3100
   - coh901331
   - tx4939
   - sirfsoc

  Drivers:
   - use rtc_lock and rtc_unlock instead of opencoding
   - constify all struct rtc_class_ops
   - quiet maybe-unused variable warning
   - replace spin_lock_irqsave with spin_lock in hard IRQ
   - pcf2127: disable Power-On Reset Override and run OTP refresh"

* tag 'rtc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (81 commits)
  rtc: abx80x: Add utility function for writing configuration key
  rtc: pcf2127: properly set flag WD_CD for rtc chips(pcf2129, pca2129)
  rtc: pcf8563: Add NXP PCA8565 compatible
  rtc: s3c: quiet maybe-unused variable warning
  rtc: s3c: stop setting bogus time
  rtc: sd3078: quiet maybe-unused variable warning
  rtc: s35390a: quiet maybe-unused variable warning
  rtc: rx8581: quiet maybe-unused variable warning
  rtc: rx8010: quiet maybe-unused variable warning
  rtc: rv8803: quiet maybe-unused variable warning
  rtc: rv3032: quiet maybe-unused variable warning
  rtc: rv3029: quiet maybe-unused variable warning
  rtc: rv3028: quiet maybe-unused variable warning
  rtc: rs5c372: quiet maybe-unused variable warning
  rtc: pcf85363: quiet maybe-unused variable warning
  rtc: pcf85063: quiet maybe-unused variable warnings
  rtc: meson: quiet maybe-unused variable warning
  rtc: m41t80: quiet maybe-unused variable warning
  rtc: isl1208: quiet maybe-unused variable warning
  rtc: ds3232: quiet maybe-unused variable warning
  ...

Pull i3c update from Alexandre Belloni:
 "Subsystem:
   - Handle drivers without probe or remove callback
   - Remove callback now returns void
   - DT documentation is now in yaml

  New driver:
   - Silvaco I3C master"

* tag 'i3c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: dw: Drop redundant disec call
  MAINTAINERS: Add Silvaco I3C master
  i3c: master: svc: Add Silvaco I3C master driver
  dt-bindings: i3c: Describe Silvaco master binding
  dt-bindings: Add vendor prefix for Silvaco
  dt-bindings: i3c: mipi-hci: Include the bus binding
  dt-bindings: i3c: Convert the bus description to yaml
  i3c: Make remove callback return void
  i3c: Handle drivers without probe or remove callback
  i3c/master/mipi-i3c-hci: Specify HAS_IOMEM dependency

Pull HSI update from Sebastian Reichel:

 - runtime PM usage counter fix

* tag 'hsi-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: Fix PM usage counter unbalance in ssi_hw_init

Pull power supply and reset updates from Sebastian Reichel:
 "Battery/charger driver changes:
   - acer_a500: new fuel gauge driver for Acer Iconia Tab A500
   - bq256xx: new charger driver
   - bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
   - bq27xxx: Fix inverted CURRENT_NOW sign
   - cpcap: rework fuel gauge and charger drivers
   - ltc4162l: new charger driver
   - max8997-charger: add extcon based current limit configuration
   - max8903, wm97xx, z2: convert to GPIO descriptors (incl. ARM board files)
   - misc cleanup and fixes

  Reset drivers:
   - new poweroff driver for ATC260x
   - at91-sama5d2_shdwc: add support for sama7g5
   - drop zte zx driver (SoC support is removed from kernel)"

* tag 'for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (55 commits)
  power-supply: use kobj_to_dev()
  power: supply: charger-manager: fix typo
  power/reset: remove zte zx driver
  power: supply: bq25980: Fix repetive bq25975 with bq25960
  power: supply: smb347-charger: Fix interrupt usage if interrupt is unavailable
  power: supply: axp20x_usb_power: Init work before enabling IRQs
  power: supply: fix sbs-charger build, needs REGMAP_I2C
  power: supply: bq27xxx: fix polarity of current_now
  power: supply: charger-manager: fix incorrect health status
  power: reset: at91-sama5d2_shdwc: add support for sama7g5
  dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc
  power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
  dt-bindings: power/supply: Add ltc4162-l-charger
  power: supply: bq24190_charger: convert comma to semicolon
  power: supply: ab8500_fg: convert comma to semicolon
  power: supply: ds2780: Switch to using the new API kobj_to_dev()
  power: supply: bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
  power: supply: cpcap-charger: Fix power_supply_put on null battery pointer
  power: supply: cpcap-battery: constify psy_desc
  power: supply: cpcap-battery: Fix typo
  ...

Pull clk updates from Stephen Boyd:
 "This is all driver updates, the majority of which is a bunch of new
  Qualcomm clk drivers that dominate the diffstat because we add support
  for six SoCs from that particular vendor.

  The other big change is the removal of various clk drivers that are no
  longer used now that the kernel is dropping support for those SoCs.

  Beyond that there's the usual non-critical fixes for existing drivers
  and a good number of patches from Lee Jones that cleanup a bunch of
  W=1 enabled builds.

  Removed Drivers:
   - Remove efm32 clk driver
   - Remove tango4 clk driver
   - Remove zte zx clk driver
   - Remove sirf prima2/atlast clk drivers
   - Remove u300 clk driver

  New Drivers:
   - PLL support on MStar/SigmaStar ARMv7 SoCs
   - CPU clks for Qualcomm SDX55
   - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
   - GCC clks for Qualcomm SM8350
   - GPU clks for Qualcomm SDM660/SDM630

  Updates:
   - Video clk fixups on Qualcomm SM8250
   - Improvements for multimedia clks on Qualcomm MSM8998
   - Fix many warnings with W=1 enabled builds under drivers/clk/
   - Support crystal load capacitance for Versaclock VC5
   - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
     glitches at boot
   - Convert Xilinx VCU clk driver to a proper clk provider driver
   - Expose Xilinx ZynqMP clk driver to more platforms
   - Amlogic pll driver fixup
   - Amlogic meson8b clock controller dt support clean up
   - Remove mipi clk from the Amlogic axg clock controller
   - New Rockchip rk3368 clock ids related to camera input
   - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
     reparenting
   - A series from Liu Ying that adds some SCU clocks support for
     i.MX8qxp DC0/MIPI-LVDS subsystems
   - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
     and clkout1/2 support for i.MX8MM/MN
   - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
   - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
   - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
     (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
     (SYS-DMAC) clocks on Renesas R-Car V3U
   - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
   - Allwinner H616 SoC clk support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: qoriq: use macros to generate pll_mask
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: mstar: MStar/SigmaStar MPLL driver
  ...

Pull thermal updates from Daniel Lezcano:

 - Use the newly introduced 'hot' and 'critical' ops for the acpi
   thermal driver (Daniel Lezcano)

 - Remove the notify ops as it is no longer used (Daniel Lezcano)

 - Remove the 'forced passive' option and the unused bind/unbind
   functions (Daniel Lezcano)

 - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
   (Daniel Lezcano)

 - Rework the delays to make them pre-computed instead of computing them
   again and again at each polling interval (Daniel Lezcano)

 - Remove the pointless 'thermal_zone_device_reset' function (Daniel
   Lezcano)

 - Use the critical and hot ops to prevent an unexpected system shutdown
   on int340x (Kai-Heng Feng)

 - Make the cooling device state private to the thermal subsystem
   (Daniel Lezcano)

 - Prevent to use not-power-aware actor devices with the power allocator
   governor (Lukasz Luba)

 - Remove 'zx' and 'tango' support along with the corresponding
   platforms (Arnd Bergman)

 - Fix several issues on the Omap thermal driver (Tony Lindgren)

 - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
   (Dmitry Baryshkov)

 - Fix an initialization loop in the adc-tm5 (Colin Ian King)

 - Fix a return error check in the cpufreq cooling device (Viresh Kumar)

* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
  thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
  thermal: qcom: Fix comparison with uninitialized variable channels_available
  thermal: qcom: add support for adc-tm5 PMIC thermal monitor
  dt-bindings: thermal: qcom: add adc-thermal monitor bindings
  thermal: ti-soc-thermal: Use non-inverted define for omap4
  thermal: ti-soc-thermal: Simplify polling with iopoll
  thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  thermal: ti-soc-thermal: Skip pointless register access for dra7
  thermal/drivers/zx: Remove zx driver
  thermal/drivers/tango: Remove tango driver
  thermal: power allocator: fail binding for non-power actor devices
  thermal/core: Make cooling device state change private
  thermal: intel: pch: Fix unexpected shutdown at critical temperature
  thermal: int340x: Fix unexpected shutdown at critical temperature
  thermal/core: Remove pointless thermal_zone_device_reset() function
  thermal/core: Remove ms based delay fields
  thermal/core: Use precomputed jiffies for the polling
  thermal/core: Precompute the delays from msecs to jiffies
  thermal/core: Remove unused macro THERMAL_TRIPS_NONE
  thermal/core: Remove THERMAL_TRIPS_NONE test
  ...

Merge tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "Lots of changes to the cros_ec_typec driver for 5.12.

  A portion of this this set of cros_ec_typec driver's changes was
  merged through GregKH's USB tree in order to satisfy cros_ec_typec
  driver and typec connector class subsystem dependencies of subsequent
  changes.

  Summary:

  cros_ec_typec:
   - Registration of cable plug information
   - Support for SOP' plug registration and altmodes
   - Support for reporting number of altmodes supported by partners and
     plugs
   - Send mux configuration ack to EC via a new host command
   - Support mux control with no port partner present
   - Decouple cable removal from partner removal

  cros_ec misc:
   - Fix some event masking in cros_ec_proto.
   - Gwendal reworked cros_ec's top and bottom half for consistency in
     ishtp and rpmsg
   - Constify static attribute_group structs"

* tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_typec: Flush pending work
  platform/chrome: cros_ec_types: Support disconnect events without partners
  platform/chrome: cros_ec_typec: Skip port partner check in configure_mux()
  platform/chrome: cros_ec_typec: Decouple partner removal
  platform/chrome: cros_ec: Call interrupt bottom half at probe time
  platform/chrome: cros_ec: Call interrupt bottom half in ISH or RPMSG mode
  platform/chrome: cros_ec_sysfs: Add cold-ap-off to sysfs reboot.
  platform/chrome: cros_ec_commands: Add host command to keep AP off after EC reset.
  platform/chrome: Constify static attribute_group structs
  platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask
  platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Standardise MFD_CELL_* helpers

  New Drivers:
   - Add support for Acer Iconia Tab A500 Embedded Controller

  New Device Support:
   - Add support for ROHM BD9574MWF to BD9571MWV
   - Add support for Intel Alder Lake PCH-P PCI to LPSS
   - Add support for Intel Alder Lake PCH-S PCI to LPSS

  New Functionality:
   - Support ACPI enumeration; arizona

  Fix-ups:
   - Managed resources; bd9571mwv
   - DT additions/fix-ups; bd9571mwv, iqs62x, max8997, gateworks-gsc, ene-kb930
   - Convert to SPDX; bd9571mw
   - Fix return values/error handling; sunxi
   - Provide SOFTDEP; arizona
   - Make use of DIV_ROUND_UP; mcp-sa11x0
   - Use generic APIs; arizona
   - Add MAC address sysfs entries; intel-m10-bmc
   - Trivial: Coding-style fix-ups; iqs62x
   - Trivial: Remove superflouous code; iqs62x
   - Clear-up naming conventions; iqs62x

  Bug Fixes:
   - Fix 'pointer from integer' error; altera-sysmgr
   - Convert SGI_MFD_IOC3 from tristate to bool; Kconfig
   - Fix interrupt handling; gateworks-gsc
   - Extend required delay; iqs62x
   - Do not use I2C polling during calibration; iqs62x
   - Do no adjust clock frequency during calibration; iqs62x
   - Fix use-after-free; wm831x-auxad"

* tag 'mfd-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
  mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()
  mfd: iqs62x: Do not change clock frequency during ATI
  mfd: iqs62x: Do not poll during ATI
  mfd: iqs62x: Increase interrupt handler return delay
  mfd: iqs62x: Rename regmap_config struct
  mfd: iqs62x: Remove unused bit mask
  mfd: iqs62x: Remove superfluous whitespace above fallthroughs
  mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs
  mfd: intel-m10-bmc: Expose MAC address and count
  mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500
  dt-bindings: mfd: Add ENE KB930 Embedded Controller binding
  dt-bindings: mfd: gateworks-gsc: Add fan-tach mode
  mfd: intel-lpss: Add Intel Alder Lake PCH-P PCI IDs
  mfd: gateworks-gsc: Fix interrupt type
  mfd: Standardise MFD_CELL_* helper names
  mfd: mcp-sa11x0: Use DIV_ROUND_UP to calculate rw_timeout
  mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell
  dt-bindings: mfd: Correct the node name of the panel LED
  mfd: sgi-ioc3: Turn Kconfig option into a bool
  mfd: altera-sysmgr: Fix physical address storing more
  ...

Pull backlight updates from Lee Jones:
 "New Functionality:
   - Convert to GPIO descriptors

  Fix-ups:
   - Trivial: fix coding style in sky81452-backlight
   - Ensure backlight state is known on bring-up in ktd253
   - Use common platform API in qcom-wled and fbdev"

* tag 'backlight-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight/video: Use Platform getter/setter functions
  backlight: ktd253: Bring up in a known state
  backlight: sky81452-backlight: Convert comma to semicolon
  backlight: lms283gf05: Convert to GPIO descriptors

Pull auxdisplay updates from Miguel Ojeda:
 "A set of auxdisplay fixes and improvements from Geert Uytterhoeven,
  and one from Robin van der Gracht that got lost a long time ago"

* tag 'auxdisplay-for-linus-v5.12' of git://github.com/ojeda/linux:
  auxdisplay: Fix duplicate CHARLCD config symbol
  auxdisplay: ht16k33: Fix refresh rate handling
  dt-bindings: auxdisplay: ht16k33: Convert to json-schema
  dt-bindings: auxdisplay: ht16k33: Fix default-brightness-level range
  dt-bindings: auxdisplay: ht16k33: Keyscan function should be optional

Pull spi updates from Mark Brown:
 "The main focus of this release from a framework point of view has been
  spi-mem where we've acquired support for a few new hardware features
  which enable better performance on suitable hardware.

  Otherwise mostly thanks to Arnd's cleanup efforts on old platforms
  we've removed several obsolete drivers which just about balance out
  the newer drivers we've added this cycle.

  Summary:

   - Allow drivers to flag if they are unidirectional.

   - Support for DTR mode and hardware acceleration of dummy cycles in
     spi-mem.

   - Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra
     QuadSPI, Realtek RTL838x and RTL839x.

   - Removal of obsolete EFM32, Txx9 and SIRF Prima and Atlas drivers"

* tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (76 commits)
  spi: Skip zero-length transfers in spi_transfer_one_message()
  spi: dw: Avoid stack content exposure
  spi: cadence-quadspi: Use spi_mem_dtr_supports_op()
  spi: spi-mem: add spi_mem_dtr_supports_op()
  spi: atmel-quadspi: Disable the QSPI IP at suspend()
  spi: pxa2xx: Add IDs for the controllers found on Intel Lynxpoint
  spi: pxa2xx: Fix the controller numbering for Wildcat Point
  spi: Change provied to provided in the file spi.h
  spi: mediatek: add set_cs_timing support
  spi: support CS timing for HW & SW mode
  spi: add power control when set_cs_timing
  spi: stm32: make spurious and overrun interrupts visible
  spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC
  spi: stm32: defer probe for reset
  spi: stm32: driver uses reset controller only at init
  spi: stm32h7: ensure message are smaller than max size
  spi: stm32: use bitfield macros
  spi: stm32: do not mandate cs_gpio
  spi: stm32: properly handle 0 byte transfer
  spi: clps711xx: remove redundant white-space
  ...

Pull regulator updates from Mark Brown:
 "Quite an active release for driver specific updates but very little
  going on at the subsystem level this time for the regulator API.

  Summary:

   - Overhaul of the Qualcomm LABIBB driver.

   - Allow use of regulator_sync_voltage() on coupled regulators.

   - Support for Action ATC260x, Mediatek DVSRC and MT6315, Qualcomm
     PCM8180/c and PM8009-1 and Richtek RT4831

   - Removal of the AB3100 driver"

* tag 'regulator-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits)
  regulator: bd718x7, bd71828, Fix dvs voltage levels
  regulator: pca9450: Add sd-vsel GPIO
  regulator: pca9450: Enable system reset on WDOG_B assertion
  regulator: pca9450: Add SD_VSEL GPIO for LDO5
  regulator: qcom-rpmh: fix pm8009 ldo7
  regulator: mt6315: Add support for MT6315 regulator
  regulator: document binding for MT6315 regulator
  regulator: dt-bindings: Document charger-supply for max8997
  regulator: qcom-labibb: Use disable_irq_nosync from isr
  regulator: pf8x00: Fix typo for PF8200 chip name
  regulator: pf8x00: set ramp_delay for bucks
  regulator: core: Avoid debugfs: Directory ... already present! error
  regulator: pf8x00: Add suspend support
  regulator: Make regulator_sync_voltage() usable by coupled regulators
  regulator: s5m8767: Drop regulators OF node reference
  regulator: qcom-rpmh: Add pmc8180 and pmc8180c
  regulator: qcom-rpmh: Add pmc8180 and pmc8180c
  regulator: s5m8767: Fix reference count leak
  regulator: remove ab3100 driver
  regulator: axp20x: Fix reference cout leak
  ...

Pull regmap update from Mark Brown:
 "Just one simple code style improvement this time, no features.

  There is an addition to add a new SoundWire regmap type but that
  should be coming via the SoundWire tree as the support for the
  underlying bus features was only added this cycle"

* tag 'regmap-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Assign boolean values to a bool variable

Pull watchdog updates from Wim Van Sebroeck:
 "New drivers:
   - Intel Keembay Soc

  New chip versions:
   - sun4i: Add H616 compatible string
   - mt8192 wdt support
   - more Rockchip compatibles to snps,dw-wdt.yaml
   - binding for Qcom SDX55
   - r8a779a0 (V3U) support

  Removed drivers:
   - sirf prima watchdog driver
   - sirf atlas watchdog driver
   - zte zx watchdog driver
   - tango watchdog driver
   - coh901 watchdog driver

  And several fixes and clean-ups"

* tag 'linux-watchdog-5.12-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
  watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ
  watchdog: mei_wdt: request stop on unregister
  dt-bindings: watchdog: Add binding for Qcom SDX55
  watchdog: remove coh901 driver
  watchdog: remove tango driver
  watchdog: remove zte zx driver
  watchdog: remove sirf atlas driver
  watchdog: remove sirf prima driver
  watchdog: mt8192: add wdt support
  dt-binding: mt8192: add toprgu reset-controller head file
  dt-binding: mediatek: mt8192: update mtk-wdt document
  dt-binding: mediatek: watchdog: fix the description of compatible
  dt-binding: watchdog: add more Rockchip compatibles to snps,dw-wdt.yaml
  dt-bindings: watchdog: sun4i: Add H616 compatible string
  watchdog: mtk_wdt: Remove mtk_wdt_stop() in probe() to prevent the system freeze and it doesn't reboot by watchdog problem
  watchdog: renesas_wdt: add grace period before rebooting
  watchdog: stop wdd when watchdog hw running in reboot_notifier
  watchdog: ziirave_wdt: remove unused including <linux/version.h>
  dt-bindings: watchdog: renesas,wdt: add r8a779a0 (V3U) support
  watchdog: renesas_wdt: don't sleep in atomic context
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for eMMC inline encryption
   - Add a helper function to parse DT properties for clock phases
   - Some improvements and cleanups for the mmc_test module

  MMC host:
   - android-goldfish: Remove driver
   - cqhci: Add support for eMMC inline encryption
   - dw_mmc-zx: Remove driver
   - meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED
   - mmci: Add support for probing bus voltage level translator
   - mtk-sd: Address race condition for request timeouts
   - sdhci_am654: Add Support for the variant on TI's AM64 SoC
   - sdhci-esdhc-imx: Prevent kernel panic at ->remove()
   - sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4
   - sdhci-msm: Add Inline Crypto Engine support
   - sdhci-msm: Use actual_clock to improve timeout calculations
   - sdhci-of-aspeed: Add Andrew Jeffery as maintainer
   - sdhci-of-aspeed: Extend clock support for the AST2600 variant
   - sdhci-pci-gli: Increase idle period for low power state for GL9763E
   - sdhci-pci-o2micro: Make tuning for SDR104 HW more robust
   - sdhci-sirf: Remove driver
   - sdhci-xenon: Add support for the AP807 variant
   - sunxi-mmc: Add support for the A100 variant
   - sunxi-mmc: Ensure host is suspended during system sleep
   - tmio: Add detection of data timeout errors
   - tmio/renesas_sdhi: Extend support for retuning
   - renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops"

* tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: sdhci-esdhc-imx: fix kernel panic when remove module
  mmc: host: Retire MMC_GOLDFISH
  mmc: cb710: Use new tasklet API
  mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure
  mmc: mmc_test: use erase_arg for mmc_erase command
  mmc: wbsd: Use new tasklet API
  mmc: via-sdmmc: Use new tasklet API
  mmc: uniphier-sd: Use new tasklet API
  mmc: tifm_sd: Use new tasklet API
  mmc: s3cmci: Use new tasklet API
  mmc: omap: Use new tasklet API
  mmc: dw_mmc: Use new tasklet API
  mmc: au1xmmc: Use new tasklet API
  mmc: atmel-mci: Use new tasklet API
  mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ
  mmc: queue: Remove unused define
  mmc: core: Drop redundant bouncesz from struct mmc_card
  mmc: core: Drop redundant member in struct mmc host
  mmc: core: Use host instead of card argument to mmc_spi_send_csd()
  mmc: core: Exclude unnecessary header file
  ...

Pull i2c updates from Wolfram Sang:

 - mostly driver updates. Bigger ones for mlxcpld and iproc. But most of
   them are all over the place.

 - removal of the efm32, sirf, u300, and zte zx bus drivers because of
   platform removal. So, we have a pleasant diffstat this time.

 - first set of cleanups in the I2C core as preparation to increase
   maximum length of SMBus transfers to 255 (as specified in the new
   standard). Better documentation of struct i2c_msg and its flags stand
   out here.

 - the testunit can now respond to SMBus block process calls which is
   the testcase when implementing the above new maximum length.

* 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (62 commits)
  i2c: remove redundant error print in stm32f7_i2c_probe
  i2c: testunit: add support for block process calls
  i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQ
  dt-bindings: eeprom: at24: Document ROHM BR24G01
  i2c: i801: Add support for Intel Alder Lake PCH-P
  i2c: mv64xxx: Fix check for missing clock after adding RPM
  i2c: mux: mlxcpld: Add callback to notify mux creation completion
  i2c: mux: mlxcpld: Extend supported mux number
  i2c: mux: mlxcpld: Extend driver to support word address space devices
  i2c: mux: mlxcpld: Get rid of adapter numbers enforcement
  i2c: mux: mlxcpld: Prepare mux selection infrastructure for two-byte support
  i2c: mux: mlxcpld: Convert driver to platform driver
  i2c: imx: Synthesize end of transaction events without idle interrupts
  i2c: i2c-qcom-geni: Add shutdown callback for i2c
  i2c: mv64xxx: Add runtime PM support
  i2c: amd-mp2: Remove unused macro
  i2c: amd-mp2: convert to PCI logging functions
  i2c: mux: mlxcpld: Move header file out of x86 realm
  platform/x86: mlxcpld: Update module license
  i2c: mux: mlxcpld: Update module license
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - Texas Instruments TPS23861 driver
   - AHT10 Temperature and Humidity Sensor Driver

  Support for new chips/variants to existing drivers:
   - Add AMD family 19h model 30h x86 match to amd_energy driver
   - Add Zen3 Ryzen Desktop CPUs support to k10temp driver
   - Add support for MAX16508 to max16601 driver
   - Support revision "B" of max31785
   - Add support for ASRock boards to nct6683 driver

  Driver removals:
   - Decomission abx500 driver

  Various other minor fixes and improvements"

* tag 'hwmon-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits)
  MAINTAINERS: Add entry for Texas Instruments TPS23861 PoE PSE
  hwmon: add Texas Instruments TPS23861 driver
  dt-bindings: hwmon: Add TI TPS23861 bindings
  hwmon: (da9052) Switch to using the new API kobj_to_dev()
  hwmon: (amd_energy) Add AMD family 19h model 30h x86 match
  hwmon: (pmbus/max31785) Support revision "B"
  hwmon: (pmbus/lm25066) Remove unnecessary pmbus_clear_cache function call
  hwmon: (pmbus) Clear sensor data after chip write
  hwmon: (pmbus/max16601) Add support for MAX16508
  hwmon: (pmbus/max16601) Determine and use number of populated phases
  hwmon: (pmbus) Simplify the calculation of variables
  hwmon: (aht10) Unlock on error in aht10_read_values()
  hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups
  hwmon: Add AHT10 Temperature and Humidity Sensor Driver
  hwmon: (applesmc) Assign boolean values to a bool variable
  hwmon: (nct6683) Support ASRock boards
  hwmon: (aspeed-pwm-tacho) Switch to using the new API kobj_to_dev()
  hwmon: (max6650) Switch to using the new API kobj_to_dev()
  hwmon: (pwm-fan) Support multiple fan tachometers
  hwmon: (pwm-fan) Store tach data separately
  ...

Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - Microsoft Surface devices System Aggregator Module support

   - SW_TABLET_MODE reporting improvements

   - thinkpad_acpi keyboard language setting support

   - platform / DPTF profile settings support:

      - Base / userspace API parts merged from Rafael's acpi-platform
        branch

      - thinkpad_acpi and ideapad-laptop support through pdx86

   - Remove support for some obsolete Intel MID platforms through
     merging of the shared intel-mid-removal branch

   - Big cleanup of the ideapad-laptop driver

   - Misc other fixes / new hw support / quirks"

* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
  platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
  platform/surface: aggregator: Fix access of unaligned value
  tools/power/x86/intel-speed-select: Update version to 1.8
  tools/power/x86/intel-speed-select: Add new command to get/set TRL
  tools/power/x86/intel-speed-select: Add new command turbo-mode
  Platform: OLPC: Constify static struct regulator_ops
  platform/surface: Add Surface Hot-Plug driver
  platform/x86: intel_scu_wdt: Drop mistakenly added const
  platform/x86: Kconfig: add missing selects for ideapad-laptop
  platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
  platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
  platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
  platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
  platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
  platform/x86: Move all dell drivers to their own subdirectory
  Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
  Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
  platform/x86: ideapad-laptop: add "always on USB charging" control support
  platform/x86: ideapad-laptop: add keyboard backlight control support
  platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
  ...

Pull crypto update from Herbert Xu:
 "API:
   - Restrict crypto_cipher to internal API users only.

  Algorithms:
   - Add x86 aesni acceleration for cts.
   - Improve x86 aesni acceleration for xts.
   - Remove x86 acceleration of some uncommon algorithms.
   - Remove RIPE-MD, Tiger and Salsa20.
   - Remove tnepres.
   - Add ARM acceleration for BLAKE2s and BLAKE2b.

  Drivers:
   - Add Keem Bay OCS HCU driver.
   - Add Marvell OcteonTX2 CPT PF driver.
   - Remove PicoXcell driver.
   - Remove mediatek driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (154 commits)
  hwrng: timeriomem - Use device-managed registration API
  crypto: hisilicon/qm - fix printing format issue
  crypto: hisilicon/qm - do not reset hardware when CE happens
  crypto: hisilicon/qm - update irqflag
  crypto: hisilicon/qm - fix the value of 'QM_SQC_VFT_BASE_MASK_V2'
  crypto: hisilicon/qm - fix request missing error
  crypto: hisilicon/qm - removing driver after reset
  crypto: octeontx2 - fix -Wpointer-bool-conversion warning
  crypto: hisilicon/hpre - enable Elliptic curve cryptography
  crypto: hisilicon - PASID fixed on Kunpeng 930
  crypto: hisilicon/qm - fix use of 'dma_map_single'
  crypto: hisilicon/hpre - tiny fix
  crypto: hisilicon/hpre - adapt the number of clusters
  crypto: cpt - remove casting dma_alloc_coherent
  crypto: keembay-ocs-aes - Fix 'q' assignment during CCM B0 generation
  crypto: xor - Fix typo of optimization
  hwrng: optee - Use device-managed registration API
  crypto: arm64/crc-t10dif - move NEON yield to C code
  crypto: arm64/aes-ce-mac - simplify NEON yield
  crypto: arm64/aes-neonbs - remove NEON yield calls
  ...

Merge tag 'tpmdd-next-v5.12-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm updates from Jarkko Sakkinen:
 "New features:

   - Cr50 I2C TPM driver

   - sysfs exports of PCR registers in TPM 2.0 chips

  Bug fixes:

   - bug fixes for tpm_tis driver, which had a racy wait for hardware
     state change to be ready to send a command to the TPM chip. The bug
     has existed already since 2006, but has only made itself known in
     recent past. This is the same as the "last time" :-)

   - Otherwise there's bunch of fixes for not as alarming regressions. I
     think the list is about the same as last time, except I added fixes
     for some disjoint bugs in trusted keys that I found some time ago"

* tag 'tpmdd-next-v5.12-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  KEYS: trusted: Reserve TPM for seal and unseal operations
  KEYS: trusted: Fix migratable=1 failing
  KEYS: trusted: Fix incorrect handling of tpm_get_random()
  tpm/ppi: Constify static struct attribute_group
  ABI: add sysfs description for tpm exports of PCR registers
  tpm: add sysfs exports for all banks of PCR registers
  keys: Update comment for restrict_link_by_key_or_keyring_chain
  tpm: Remove tpm_dev_wq_lock
  char: tpm: add i2c driver for cr50
  tpm: Fix fall-through warnings for Clang
  tpm_tis: Clean up locality release
  tpm_tis: Fix check_locality for correct locality acquisition

Pull seccomp updates from Kees Cook:
 "Two small seccomp updates.

  This contains a fix for a build failure that went unnoticed for many
  years, and a memory barrier correction:

   - Fix a non-FILTER build failure for some architectures (Paul
     Cercueil)

   - Improve performance with correct memory barrier (wanghongzhe)"

* tag 'seccomp-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: Improve performace by optimizing rmb()
  seccomp: Add missing return in non-void function

Pull smack updates from Casey Schaufler:
 "Bounds checking for writes to smackfs interfaces"

* tag 'Smack-for-v5.12' of git://github.com/cschaufler/smack-next:
  smackfs: restrict bytes count in smackfs write functions

Pull IMA updates from Mimi Zohar:
 "New is IMA support for measuring kernel critical data, as per usual
  based on policy. The first example measures the in memory SELinux
  policy. The second example measures the kernel version.

  In addition are four bug fixes to address memory leaks and a missing
  'static' function declaration"

* tag 'integrity-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  integrity: Make function integrity_add_key() static
  ima: Free IMA measurement buffer after kexec syscall
  ima: Free IMA measurement buffer on error
  IMA: Measure kernel version in early boot
  selinux: include a consumer of the new IMA critical data hook
  IMA: define a builtin critical data measurement policy
  IMA: extend critical data hook to limit the measurement based on a label
  IMA: limit critical data measurement based on a label
  IMA: add policy rule to measure critical data
  IMA: define a hook to measure kernel integrity critical data
  IMA: add support to measure buffer data hash
  IMA: generalize keyring specific measurement constructs
  evm: Fix memleak in init_desc

Pull audit updates from Paul Moore:
 "Three very trivial patches for audit this time"

* tag 'audit-pr-20210215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: Make audit_filter_syscall() return void
  audit: Remove leftover reference to the audit_tasklet
  kernel/audit: convert comma to semicolon

Pull selinux updates from Paul Moore:
 "We've got a good handful of patches for SELinux this time around; with
  everything passing the selinux-testsuite and applying cleanly to your
  tree as of a few minutes ago. The highlights are:

   - Add support for labeling anonymous inodes, and extend this new
     support to userfaultfd.

   - Fallback to SELinux genfs file labeling if the filesystem does not
     have xattr support. This is useful for virtiofs which can vary in
     its xattr support depending on the backing filesystem.

   - Classify and handle MPTCP the same as TCP in SELinux.

   - Ensure consistent behavior between inode_getxattr and
     inode_listsecurity when the SELinux policy is not loaded. This
     fixes a known problem with overlayfs.

   - A couple of patches to prune some unused variables from the SELinux
     code, mark private variables as static, and mark other variables as
     __ro_after_init or __read_mostly"

* tag 'selinux-pr-20210215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  fs: anon_inodes: rephrase to appropriate kernel-doc
  userfaultfd: use secure anon inodes for userfaultfd
  selinux: teach SELinux about anonymous inodes
  fs: add LSM-supporting anon-inode interface
  security: add inode_init_security_anon() LSM hook
  selinux: fall back to SECURITY_FS_USE_GENFS if no xattr support
  selinux: mark selinux_xfrm_refcount as __read_mostly
  selinux: mark some global variables __ro_after_init
  selinux: make selinuxfs_mount static
  selinux: drop the unnecessary aurule_callback variable
  selinux: remove unused global variables
  selinux: fix inconsistency between inode_getxattr and inode_listsecurity
  selinux: handle MPTCP consistently with TCP

Pull tomoyo updates from Tetsuo Handa:
 "Detect kernel thread correctly, and ignore harmless data race"

* tag 'tomoyo-pr-20210215' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
  tomoyo: recognize kernel threads correctly
  tomoyo: ignore data race while checking quota

Pull drm updates from Dave Airlie:
 "A pretty normal tree, lots of refactoring across the board, ttm, i915,
  nouveau, and bunch of features in various drivers.

  docs:
   - lots of updated docs

  core:
   - require crtc to have unique primary plane
   - fourcc macro fix
   - PCI bar quirk for bar resizing
   - don't sent hotplug on error
   - move vm code to legacy
   - nuke hose only used on old oboslete alpha

  dma-buf:
   - kernel doc updates
   - improved lock tracking

  dp/hdmi:
   - DP-HDMI2.1 protocol converter support

  ttm:
   - bo size handling cleanup
   - release a pinned bo warning
   - cleanup lru handler
   - avoid using pages with drm_prime_sg_to_page_addr_arrays

  cma-helper:
   - prime/mmap fixes

  bridge:
   - add DP support

  gma500:
   - remove gma3600 support

  i915:
   - try eDP fast/narrow link again with fallback
   - Intel eDP backlight control
   - replace display register read/write macros
   - refactor intel_display.c
   - display power improvements
   - HPD code cleanup
   - Rocketlake display fixes
   - Power/backlight/RPM fixes
   - DG1 display fix
   - IVB/BYT clear residuals security fix again
   - make i915 mitigations options via parameter
   - HSW GT1 GPU hangs fixes
   - DG1 workaround hang fixes
   - TGL DMAR hang avoidance
   - Lots of GT fixes
   - follow on fixes for residuals clear
   - gen7 per-engine-reset support
   - HDCP2.2 + HDCP1.4 GEN12 DP MST support
   - TGL clear color support
   - backlight refactoring
   - VRR/Adaptive sync enabling on DP/EDP for TGL+
   - async flips for all ilk+

  amdgpu:
   - rework IH ring handling (Vega/Navi)
   - rework HDP handling (Vega/Navi)
   - swSMU updates for renoir/vangogh
   - Sienna Cichild overdrive support
   - FP16 on DCE8-11 support
   - GPU reset on navy flounder/vangogh
   - SMU profile fixes for APU
   - SR-IOV fixes
   - Vangogh SMU fixes
   - fan speed control fixes

  amdkfd:
   - config handling fix
   - buffer free fix
   - recursive lock warnings fix

  nouveau:
   - Turing MMU fault recovery fixes
   - mDP connectors reporting fix
   - audio locking fixes
   - rework engines/instances code to support new scheme

  tegra:
   - VIC newer firmware support
   - display/gr2d fixes for older tegra
   - pm reference leak fix

  mediatek:
   - SOC MT8183 support
   - decouple sub driver + share mtk mutex driver

  radeon:
   - PCI resource fix for some platforms

  ingenic:
   - pm support
   - 8-bit delta RGB panels

  vmwgfx:
   - managed driver helpers

  vc4:
   - BCM2711 DSI1 support
   - converted to atomic helpers
   - enable 10/12 bpc outputs
   - gem prime mmap helpers
   - CEC fix

  omap:
   - use degamma table
   - CTM support
   - rework DSI support

  imx:
   - stack usage fixes
   - drm managed support
   - imx-tve clock provider leak fix
-

  rcar-du:
   - default mode fixes
   - conversion to managed API

  hisilicon:
   - use simple encoder

  vkms:
   - writeback connector support

  d3:
   - BT2020 support"

* tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits)
  drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2)
  drm/radeon: OLAND boards don't have VCE
  drm/amdkfd: Fix recursive lock warnings
  drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()
  drm/amd/display: Fix potential integer overflow
  drm/amdgpu/display: remove hdcp_srm sysfs on device removal
  drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3
  drm/i915/gt: Correct surface base address for renderclear
  drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling
  drm/nouveau/top/ga100: initial support
  drm/nouveau/top: add ioctrl/nvjpg
  drm/nouveau/privring: rename from ibus
  drm/nouveau/nvkm: remove nvkm_subdev.index
  drm/nouveau/nvkm: determine subdev id/order from layout
  drm/nouveau/vic: switch to instanced constructor
  drm/nouveau/sw: switch to instanced constructor
  drm/nouveau/sec2: switch to instanced constructor
  drm/nouveau/sec: switch to instanced constructor
  drm/nouveau/pm: switch to instanced constructor
  drm/nouveau/nvenc: switch to instanced constructor
  ...

Pull sound updates from Takashi Iwai:
 "A relatively calm release at this time, and no massive code changes
  are found in the stats, while a wide range of code refactoring and
  cleanup have been done.

  Note that this update includes the tree-wide trivial changes for
  dropping the return value from ISA remove callbacks, too.

  Below lists up some highlight:

  ALSA Core:
   - Support for the software jack injection via debugfs
   - Fixes for sync_stop PCM operations

  HD-audio and USB-audio:
   - A few usual HD-audio device quirks
   - Updates for Tegra HD-audio
   - More quirks for Pioneer and other USB-audio devices
   - Stricter state checks at USB-audio disconnection

  ASoC:
   - Continued code refactoring, cleanup and fixes in ASoC core API
   - A KUnit testsuite for the topology code
   - Lots of ASoC Intel driver Realtek codec updates, quirk additions
     and fixes
   - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
     nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
   - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers

  Others:
   - Drop return value from ISA driver remove callback
   - Cleanup with DIV_ROUND_UP() macro
   - FireWire updates, HDSP output loopback support"

* tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits)
  ALSA: hda: intel-dsp-config: add Alder Lake support
  ASoC: soc-pcm: fix hw param limits calculation for multi-DAI
  ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
  ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
  ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
  ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
  ASoC: soc-pcm: fix hwparams min/max init for dpcm
  ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup
  ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10
  ALSA: hda: Add another CometLake-H PCI ID
  ASoC: soc-pcm: add soc_pcm_hw_update_format()
  ASoC: soc-pcm: add soc_pcm_hw_update_chan()
  ASoC: soc-pcm: add soc_pcm_hw_update_rate()
  ASoC: wm_adsp: Remove unused control callback structure
  ASoC: SOF: relax ABI checks and avoid unnecessary warnings
  ASoC: codecs: lpass-tx-macro: add dapm widgets and route
  ASoC: codecs: lpass-tx-macro: add support for lpass tx macro
  ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec
  ASoC: codecs: lpass-rx-macro: add iir widgets
  ASoC: codecs: lpass-rx-macro: add dapm widgets and route
  ...

Pull media updates from Mauro Carvalho Chehab:

 - some core fixes in VB2 mem2mem support

 - some improvements and cleanups in V4L2 async kAPI

 - newer controls in V4L2 API for H-264 and HEVC codecs

 - allegro-dvt driver was promoted from staging

 - new i2c sendor drivers: imx334, ov5648, ov8865

 - new automobile camera module: rdacm21

 - ipu3 cio2 driver started gained support for some ACPI BIOSes

 - new ATSC frontend: MaxLinear mxl692 VSB tuner/demod

 - the SMIA/CCS driver gained more support for CSS standard

 - several driver fixes, updates and improvements

* tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits)
  media: v4l: async: Fix kerneldoc documentation for async functions
  media: i2c: max9271: Add MODULE_* macros
  media: i2c: Kconfig: Make MAX9271 a module
  media: imx334: 'ret' is uninitialized, should have been PTR_ERR()
  media: i2c: Add imx334 camera sensor driver
  media: dt-bindings: media: Add bindings for imx334
  media: ov8856: Configure sensor for GRBG Bayer for all modes
  media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control
  media: ov5675: fix vflip/hflip control
  media: ipu3-cio2: Build bridge only if ACPI is enabled
  media: Remove the legacy v4l2-clk API
  media: ov6650: Use the generic clock framework
  media: mt9m111: Use the generic clock framework
  media: ov9640: Use the generic clock framework
  media: pxa_camera: Drop the v4l2-clk clock register
  media: mach-pxa: Register the camera sensor fixed-rate clock
  media: i2c: imx258: get clock from device properties and enable it via runtime PM
  media: i2c: imx258: simplify getting state container
  media: i2c: imx258: add support for binding via device tree
  media: dt-bindings: media: imx258: add bindings for IMX258 sensor
  ...

Pull JFFS2/UBIFS and UBI updates from Richard Weinberger:
 "JFFS2:
   - Fix for use-after-free in jffs2_sum_write_data()
   - Fix for out-of-bounds access in jffs2_zlib_compress()

  UBI:
   - Remove dead/useless code

  UBIFS:
   - Fix for a memory leak in ubifs_init_authentication()
   - Fix for high stack usage
   - Fix for a off-by-one error in xattrs code"

* tag 'for-linus-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Fix error return code in alloc_wbufs()
  jffs2: check the validity of dstlen in jffs2_zlib_compress()
  ubifs: Fix off-by-one error
  ubifs: replay: Fix high stack usage, again
  ubifs: Fix memleak in ubifs_init_authentication
  jffs2: fix use after free in jffs2_sum_write_data()
  ubi: eba: Delete useless kfree code
  ubi: remove dead code in validate_vid_hdr()

Pull MTD updates from Richard Weinberger:
 "MTD core changes:
   - Initial support for BCM4908 partitions

  Raw NAND controller drivers:
   - Intel: Fix an error handling path in 'ebu_dma_start()'
   - Tango: Remove the driver
   - Marvell: Convert comma to semicolon
   - MXC: Convert comma to semicolon
   - Qcom: Add support for Qcom SMEM parser

  Related MTD changes:
   - parsers: Add Qcom SMEM parser

  SPI NOR core changes:
   - Add non-uniform erase fixes.
   - Add Global Block Unlock command. It is defined by few flash
     vendors, and it is used for now just by sst.

  SPI NOR controller drivers changes:
   - intel-spi: Add support for Intel Alder Lake-P SPI serial flash.
   - hisi-sfc: Put child node np on error path"

* tag 'mtd/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (23 commits)
  dt-bindings: mtd: add binding for BCM4908 partitions
  dt-bindings: mtd: move partition binding to its own file
  mtd: spi-nor: sst: Add support for Global Unlock on sst26vf
  mtd: spi-nor: Add Global Block Unlock command
  mtd: spi-nor: core: Add erase size check for erase command initialization
  mtd: spi-nor: core: Fix erase type discovery for overlaid region
  mtd: spi-nor: sfdp: Fix last erase region marking
  mtd: spi-nor: sfdp: Fix wrong erase type bitmask for overlaid region
  mtd: rawnand: intel: Fix an error handling path in 'ebu_dma_start()'
  mtd: rawnand: tango: Remove the driver
  mtd: rawnand: marvell: convert comma to semicolon
  mtd: st_spi_fsm: convert comma to semicolon
  mtd: convert comma to semicolon
  mtd: parsers: afs: Fix freeing the part name memory in failure
  mtd: parser: imagetag: fix error codes in bcm963xx_parse_imagetag_partitions()
  mtd: phram: use div_u64_rem to stop overwrite len in phram_setup
  mtd: remove redundant assignment to pointer eb
  mtd: spi-nor: hisi-sfc: Put child node np on error path
  mtd: spi-nor: intel-spi: Add support for Intel Alder Lake-P SPI serial flash
  mtd: rawnand: qcom: Add support for Qcom SMEM parser
  ...

Pull UML updates from Richard Weinberger:

 - Many cleanups and fixes for our virtio code

 - Add support for a pseudo RTC

 - Fix for a possible jailbreak

 - Minor fixes (spelling, header files)

* tag 'for-linux-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: irq.h: include <asm-generic/irq.h>
  um: io.h: include <linux/types.h>
  um: add a pseudo RTC
  um: remove process stub VMA
  um: rework userspace stubs to not hard-code stub location
  um: separate child and parent errors in clone stub
  um: defer killing userspace on page table update failures
  um: mm: check more comprehensively for stub changes
  um: print register names in wait_for_stub
  um: hostfs: use a kmem cache for inodes
  mm: Remove arch_remap() and mm-arch-hooks.h
  um: fix spelling mistake in Kconfig "privleges" -> "privileges"
  um: virtio: allow devices to be configured for wakeup
  um: time-travel: rework interrupt handling in ext mode
  um: virtio: disable VQs during suspend
  um: virtio: fix handling of messages without payload
  um: virtio: clean up a comment

Pull s390 updates from Vasily Gorbik:

 - Convert to using the generic entry infrastructure.

 - Add vdso time namespace support.

 - Switch s390 and alpha to 64-bit ino_t. As discussed at

     https://lore.kernel.org/linux-mm/YCV7QiyoweJwvN+m@osiris/

 - Get rid of expensive stck (store clock) usages where possible.
   Utilize cpu alternatives to patch stckf when supported.

 - Make tod_clock usage less error prone by converting it to a union and
   rework code which is using it.

 - Machine check handler fixes and cleanups.

 - Drop couple of minor inline asm optimizations to fix clang build.

 - Default configs changes notably to make libvirt happy.

 - Various changes to rework and improve qdio code.

 - Other small various fixes and improvements all over the code.

* tag 's390-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (68 commits)
  s390/qdio: remove 'merge_pending' mechanism
  s390/qdio: improve handling of PENDING buffers for QEBSM devices
  s390/qdio: rework q->qdio_error indication
  s390/qdio: inline qdio_kick_handler()
  s390/time: remove get_tod_clock_ext()
  s390/crypto: use store_tod_clock_ext()
  s390/hypfs: use store_tod_clock_ext()
  s390/debug: use union tod_clock
  s390/kvm: use union tod_clock
  s390/vdso: use union tod_clock
  s390/time: convert tod_clock_base to union
  s390/time: introduce new store_tod_clock_ext()
  s390/time: rename store_tod_clock_ext() and use union tod_clock
  s390/time: introduce union tod_clock
  s390,alpha: switch to 64-bit ino_t
  s390: split cleanup_sie
  s390: use r13 in cleanup_sie as temp register
  s390: fix kernel asce loading when sie is interrupted
  s390: add stack for machine check handler
  s390: use WRITE_ONCE when re-allocating async stack
  ...

Pull KVM updates from Paolo Bonzini:
 "x86:

   - Support for userspace to emulate Xen hypercalls

   - Raise the maximum number of user memslots

   - Scalability improvements for the new MMU.

     Instead of the complex "fast page fault" logic that is used in
     mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
     but the code that can run against page faults is limited. Right now
     only page faults take the lock for reading; in the future this will
     be extended to some cases of page table destruction. I hope to
     switch the default MMU around 5.12-rc3 (some testing was delayed
     due to Chinese New Year).

   - Cleanups for MAXPHYADDR checks

   - Use static calls for vendor-specific callbacks

   - On AMD, use VMLOAD/VMSAVE to save and restore host state

   - Stop using deprecated jump label APIs

   - Workaround for AMD erratum that made nested virtualization
     unreliable

   - Support for LBR emulation in the guest

   - Support for communicating bus lock vmexits to userspace

   - Add support for SEV attestation command

   - Miscellaneous cleanups

  PPC:

   - Support for second data watchpoint on POWER10

   - Remove some complex workarounds for buggy early versions of POWER9

   - Guest entry/exit fixes

  ARM64:

   - Make the nVHE EL2 object relocatable

   - Cleanups for concurrent translation faults hitting the same page

   - Support for the standard TRNG hypervisor call

   - A bunch of small PMU/Debug fixes

   - Simplification of the early init hypercall handling

  Non-KVM changes (with acks):

   - Detection of contended rwlocks (implemented only for qrwlocks,
     because KVM only needs it for x86)

   - Allow __DISABLE_EXPORTS from assembly code

   - Provide a saner follow_pfn replacements for modules"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
  KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
  KVM: selftests: Don't bother mapping GVA for Xen shinfo test
  KVM: selftests: Fix hex vs. decimal snafu in Xen test
  KVM: selftests: Fix size of memslots created by Xen tests
  KVM: selftests: Ignore recently added Xen tests' build output
  KVM: selftests: Add missing header file needed by xAPIC IPI tests
  KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
  KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
  locking/arch: Move qrwlock.h include after qspinlock.h
  KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
  KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
  KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
  KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
  KVM: PPC: remove unneeded semicolon
  KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
  KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
  KVM: PPC: Book3S HV: Fix radix guest SLB side channel
  KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
  KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
  KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
  ...

Merge tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V updates from Wei Liu:

 - VMBus hardening patches from Andrea Parri and Andres Beltran.

 - Patches to make Linux boot as the root partition on Microsoft
   Hypervisor from Wei Liu.

 - One patch to add a new sysfs interface to support hibernation on
   Hyper-V from Dexuan Cui.

 - Two miscellaneous clean-up patches from Colin and Gustavo.

* tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (31 commits)
  Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer"
  iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition
  x86/hyperv: implement an MSI domain for root partition
  asm-generic/hyperv: import data structures for mapping device interrupts
  asm-generic/hyperv: introduce hv_device_id and auxiliary structures
  asm-generic/hyperv: update hv_interrupt_entry
  asm-generic/hyperv: update hv_msi_entry
  x86/hyperv: implement and use hv_smp_prepare_cpus
  x86/hyperv: provide a bunch of helper functions
  ACPI / NUMA: add a stub function for node_to_pxm()
  x86/hyperv: handling hypercall page setup for root
  x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary
  x86/hyperv: allocate output arg pages if required
  clocksource/hyperv: use MSR-based access if running as root
  Drivers: hv: vmbus: skip VMBus initialization if Linux is root
  x86/hyperv: detect if Linux is the root partition
  asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT
  hv: hyperv.h: Replace one-element array with flexible-array in struct icmsg_negotiate
  hv_netvsc: Restrict configurations on isolated guests
  Drivers: hv: vmbus: Enforce 'VMBus version >= 5.2' on isolated guests
  ...

Pull parisc updates from Helge Deller:

 - Optimize parisc page table locks by using the existing
   page_table_lock

 - Export argv0-preserve flag in binfmt_misc for usage in qemu-user

 - Fix interrupt table (IVT) checksum so firmware will call crash
   handler (HPMC)

 - Increase IRQ stack to 64kb on 64-bit kernel

 - Switch to common devmem_is_allowed() implementation

 - Minor fix to get_whan()

* 'parisc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  binfmt_misc: pass binfmt_misc flags to the interpreter
  parisc: Optimize per-pagetable spinlocks
  parisc: Replace test_ti_thread_flag() with test_tsk_thread_flag()
  parisc: Bump 64-bit IRQ stack size to 64 KB
  parisc: Fix IVT checksum calculation wrt HPMC
  parisc: Use the generic devmem_is_allowed()
  parisc: Drop out of get_whan() if task is running again

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for Nintendo N64

 - added support for Realtek RTL83XX SoCs

 - kaslr support for Loongson64

 - first steps to get rid of set_fs()

 - DMA runtime coherent/non-coherent selection cleanup

 - cleanups and fixes

* tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (98 commits)
  Revert "MIPS: Add basic support for ptrace single step"
  vmlinux.lds.h: catch more UBSAN symbols into .data
  MIPS: kernel: Drop kgdb_call_nmi_hook
  MAINTAINERS: Add git tree for KVM/mips
  MIPS: Use common way to parse elfcorehdr
  MIPS: Simplify EVA cache handling
  Revert "MIPS: kernel: {ftrace,kgdb}: Set correct address limit for cache flushes"
  MIPS: remove CONFIG_DMA_PERDEV_COHERENT
  MIPS: remove CONFIG_DMA_MAYBE_COHERENT
  driver core: lift dma_default_coherent into common code
  MIPS: refactor the runtime coherent vs noncoherent DMA indicators
  MIPS/alchemy: factor out the DMA coherent setup
  MIPS/malta: simplify plat_setup_iocoherency
  MIPS: Add basic support for ptrace single step
  MAINTAINERS: replace non-matching patterns for loongson{2,3}
  MIPS: Make check condition for SDBBP consistent with EJTAG spec
  mips: Replace lkml.org links with lore
  Revert "MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op"
  MIPS: crash_dump.c: Simplify copy_oldmem_page()
  Revert "mips: Manually call fdt_init_reserved_mem() method"
  ...

Pull m68k updates from Geert Uytterhoeven:

 - fix ADB autopoll regression

 - defconfig updates

* tag 'm68k-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  macintosh/adb-iop: Use big-endian autopoll mask
  m68k: defconfig: Update defconfigs for v5.11-rc1

Pull arm64 updates from Will Deacon:

 - vDSO build improvements including support for building with BSD.

 - Cleanup to the AMU support code and initialisation rework to support
   cpufreq drivers built as modules.

 - Removal of synthetic frame record from exception stack when entering
   the kernel from EL0.

 - Add support for the TRNG firmware call introduced by Arm spec
   DEN0098.

 - Cleanup and refactoring across the board.

 - Avoid calling arch_get_random_seed_long() from
   add_interrupt_randomness()

 - Perf and PMU updates including support for Cortex-A78 and the v8.3
   SPE extensions.

 - Significant steps along the road to leaving the MMU enabled during
   kexec relocation.

 - Faultaround changes to initialise prefaulted PTEs as 'old' when
   hardware access-flag updates are supported, which drastically
   improves vmscan performance.

 - CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
   (#1024718)

 - Preparatory work for yielding the vector unit at a finer granularity
   in the crypto code, which in turn will one day allow us to defer
   softirq processing when it is in use.

 - Support for overriding CPU ID register fields on the command-line.

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
  drivers/perf: Replace spin_lock_irqsave to spin_lock
  mm: filemap: Fix microblaze build failure with 'mmu_defconfig'
  arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+
  arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line
  arm64: Defer enabling pointer authentication on boot core
  arm64: cpufeatures: Allow disabling of BTI from the command-line
  arm64: Move "nokaslr" over to the early cpufeature infrastructure
  KVM: arm64: Document HVC_VHE_RESTART stub hypercall
  arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0
  arm64: Add an aliasing facility for the idreg override
  arm64: Honor VHE being disabled from the command-line
  arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line
  arm64: cpufeature: Add an early command-line cpufeature override facility
  arm64: Extract early FDT mapping from kaslr_early_init()
  arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding()
  arm64: cpufeature: Add global feature override facility
  arm64: Move SCTLR_EL1 initialisation to EL-agnostic code
  arm64: Simplify init_el2_state to be non-VHE only
  arm64: Move VHE-specific SPE setup to mutate_to_vhe()
  arm64: Drop early setting of MDSCR_EL2.TPMS
  ...