- 01 Jul, 2017 9 commits
-
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. This patch uses refcount_inc_not_zero() instead of atomic_inc_not_zero_hint() due to absense of a _hint() version of refcount API. If the hint() version must be used, we might need to revisit API. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. This conversion requires overall +1 on the whole refcounting scheme. Signed-off-by:
-
- 30 Jun, 2017 7 commits
-
-
David S. Miller authored
Rafal Ozieblo says: ==================== PTP support for macb driver This patch series adds support for PTP synchronization protocol in Cadence GEM driver based on PHC. v2 changes: * removed alarm's support * removed external time stamp support * removed PTP event interrupt handling * removed ptp_hw_support flag * removed all extra sanity checks * removed unnecessary #ifdef * fixed coding style and alligment issues * renamed macb.c to macb_main.c v3 changes: * added checking NULL ptr from ptp_clock_register() * fixed error codes return * locals list in "upside down Christmas tree" style * fixed some other issues from review v4 changes: * respin to the newest next-next (28 Jun 2017) ==================== Signed-off-by: -
Rafal Ozieblo authored
This patch is based on original Harini's patch and Andrei's patch, implemented in a separate file to ease the review/maintanance and integration with other platforms. This driver supports GEM-GXL: - Register ptp clock framework - Initialize PTP related registers - HW time stamp on the PTP Ethernet packets are received using the SO_TIMESTAMPING API. Time stamps are obtained from the dma buffer descriptors - add macb_ptp to compilation chain Signed-off-by:
Rafal Ozieblo <rafalo@cadence.com> Signed-off-by:
-
Rafal Ozieblo authored
In case that macb is compiled as a module, macb.c has been renamed to macb_main.c to avoid naming confusion in Makefile. Signed-off-by:
-
Rafal Ozieblo authored
Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Rafal Ozieblo authored
This patch adds support for PTP timestamps in DMA buffer descriptors. It checks capability at runtime and uses appropriate buffer descriptor. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
A set of overlapping changes in macvlan and the rocker driver, nothing serious. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. This batch contains connection tracking updates for the cleanup iteration path, patches from Florian Westphal: X) Skip unconfirmed conntracks in nf_ct_iterate_cleanup_net(), just set dying bit to let the CPU release them. X) Add nf_ct_iterate_destroy() to be used on module removal, to kill conntrack from all namespace. X) Restart iteration on hashtable resizing, since both may occur at the same time. X) Use the new nf_ct_iterate_destroy() to remove conntrack with NAT mapping on module removal. X) Use nf_ct_iterate_destroy() to remove conntrack entries helper module removal, from Liping Zhang. X) Use nf_ct_iterate_cleanup_net() to remove the timeout extension if user requests this, also from Liping. X) Add net_ns_barrier() and use it from FTP helper, so make sure no concurrent namespace removal happens at the same time while the helper module is being removed. X) Use NFPROTO_MAX in layer 3 conntrack protocol array, to reduce module size. Same thing in nf_tables. Updates for the nf_tables infrastructure: X) Prepare usage of the extended ACK reporting infrastructure for nf_tables. X) Remove unnecessary forward declaration in nf_tables hash set. X) Skip set size estimation if number of element is not specified. X) Changes to accomodate a (faster) unresizable hash set implementation, for anonymous sets and dynamic size fixed sets with no timeouts. X) Faster lookup function for unresizable hash table for 2 and 4 bytes key. And, finally, a bunch of asorted small updates and cleanups: X) Do not hold reference to netdev from ipt_CLUSTER, instead subscribe to device events and look up for index from the packet path, this is fixing an issue that is present since the very beginning, patch from Xin Long. X) Use nf_register_net_hook() in ipt_CLUSTER, from Florian Westphal. X) Use ebt_invalid_target() whenever possible in the ebtables tree, from Gao Feng. X) Calm down compilation warning in nf_dup infrastructure, patch from stephen hemminger. X) Statify functions in nftables rt expression, also from stephen. X) Update Makefile to use canonical method to specify nf_tables-objs. From Jike Song. X) Use nf_conntrack_helpers_register() in amanda and H323. X) Space cleanup for ctnetlink, from linzhang. ==================== Signed-off-by:
-
- 29 Jun, 2017 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Need to access netdev->num_rx_queues behind an accessor in netvsc driver otherwise the build breaks with some configs, from Arnd Bergmann. 2) Add dummy xfrm_dev_event() so that build doesn't fail when CONFIG_XFRM_OFFLOAD is not set. From Hangbin Liu. 3) Don't OOPS when pfkey_msg2xfrm_state() signals an erros, from Dan Carpenter. 4) Fix MCDI command size for filter operations in sfc driver, from Martin Habets. 5) Fix UFO segmenting so that we don't calculate incorrect checksums, from Michal Kubecek. 6) When ipv6 datagram connects fail, reset destination address and port. From Wei Wang. 7) TCP disconnect must reset the cached receive DST, from WANG Cong. 8) Fix sign extension bug on 32-bit in dev_get_stats(), from Eric Dumazet. 9) fman driver has to depend on HAS_DMA, from Madalin Bucur. 10) Fix bpf pointer leak with xadd in verifier, from Daniel Borkmann. 11) Fix negative page counts with GFO, from Michal Kubecek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) sfc: fix attempt to translate invalid filter ID net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish() bpf: prevent leaking pointer via xadd on unpriviledged arcnet: com20020-pci: add missing pdev setup in netdev structure arcnet: com20020-pci: fix dev_id calculation arcnet: com20020: remove needless base_addr assignment Trivial fix to spelling mistake in arc_printk message arcnet: change irq handler to lock irqsave rocker: move dereference before free mlxsw: spectrum_router: Fix NULL pointer dereference net: sched: Fix one possible panic when no destroy callback virtio-net: serialize tx routine during reset net: usb: asix88179_178a: Add support for the Belkin B2B128 fsl/fman: add dependency on HAS_DMA net: prevent sign extension in dev_get_stats() tcp: reset sk_rx_dst in tcp_disconnect() net: ipv6: reset daddr and dport in sk if connect() fails bnx2x: Don't log mc removal needlessly bnxt_en: Fix netpoll handling. bnxt_en: Add missing logic to handle TPA end error conditions. ... -
Linus Torvalds authored
Merge tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - dm thinp fix for crash that will occur when metadata device failure races with discard passdown to the underlying data device. - dm raid fix to not access the superblock's >= 1.9.0 'sectors' member unconditionally. * tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: do not queue freed thin mapping for next stage processing dm raid: fix oops on upgrading to extended superblock format
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Two fixes that should go into this release. One is an nvme regression fix from Keith, fixing a missing queue freeze if the controller is being reset. This causes the reset to hang. The other is a fix for a leak of the bio protection info, if smaller sized O_DIRECT is used. This fix should be more involved as we have other problematic paths in the kernel, but given as this isn't a regression in this series, we'll tackle those for 4.13" * 'for-linus' of git://git.kernel.dk/linux-block: block: provide bio_uninit() free freeing integrity/task associations nvme/pci: Fix stuck nvme reset
-
Edward Cree authored
When filter insertion fails with no rollback, we were trying to convert EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus filter ID of 0x1fff, neither of which is a good thing. Fixes: 0ccb998b ("sfc: fix filter_id misinterpretation in edge case") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4_en dynamic TC tx queues This patchset from Inbar aligns the number of TX queues to the actual need, according to the TC configuration. Series generated against net-next commit: 2ee87db3 Merge branch 'nfp-get_phys_port_name-for-representors-and-SR-IOV-reorder' ==================== Signed-off-by:
-
Inbar Karmy authored
Currently the number of TX queues that are allocated doesn't depend on the number of TCs, the module always loads with max num of UP per channel. In order to prevent the allocation of unnecessary memory, the module will load with minimum number of UPs per channel, and the user will be able to control the number of TX queues per channel by changing the number of TC to 8 using the tc command. The variable num_up will hold the information about the current number of UPs. Due to the change, needed to remove the lines that set the value of UP to be different than zero in the func "mlx4_en_select_queue", since now the num of TX queues that are allocated is only one per channel in default. In order not to force the UP to be zero in case of only one TC, added a condition before forcing it in the func "mlx4_en_fill_qp_context". Tested: After the module is loaded with minimum number of UP per channel, to increase num of TCs to 8, use: tc qdisc add dev ens8 root mqprio num_tc 8 In order to decrease the number of TCs to minimum number of UP per channel, use: tc qdisc del dev ens8 root Signed-off-by:
Inbar Karmy <inbark@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Cc: Tarick Bedeir <tarick@google.com> Signed-off-by:
-
Inbar Karmy authored
Until this patch, the number of UPs was hard coded for eight. Replace this with a variable in struct "mlx4_en_port_profile". Currently, the variable will hold the maximum number of UP, as before. The patch creates an infrastructure to add an option for dynamic change of the actual number of TCs. Signed-off-by:
-
Michal Kubeček authored
Recently I started seeing warnings about pages with refcount -1. The problem was traced to packets being reused after their head was merged into a GRO packet by skb_gro_receive(). While bisecting the issue pointed to commit c21b48cc ("net: adjust skb->truesize in ___pskb_trim()") and I have never seen it on a kernel with it reverted, I believe the real problem appeared earlier when the option to merge head frag in GRO was implemented. Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE branch of napi_skb_finish() so that if the driver uses napi_gro_frags() and head is merged (which in my case happens after the skb_condense() call added by the commit mentioned above), the skb is reused including the head that has been merged. As a result, we release the page reference twice and eventually end up with negative page refcount. To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish() the same way it's done in napi_skb_finish(). Fixes: d7e8883c ("net: make GRO aware of skb->head_frag") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Arvind Yadav authored
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 2645 896 0 3541 dd5 net/bridge/br_sysfs_br.o File size After adding 'const': text data bss dec hex filename 2701 832 0 3533 dcd net/bridge/br_sysfs_br.o Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/device.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 9968 3168 16 13152 3360 net/core/net-sysfs.o File size After adding 'const': text data bss dec hex filename 10160 2976 16 13152 3360 net/core/net-sysfs.o Signed-off-by:
-
Arvind Yadav authored
dev_pm_ops are not supposed to change at runtime. All functions working with dev_pm_ops provided by <linux/device.h> work with const dev_pm_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 19057 392 0 19449 4bf9 drivers/net/ethernet/freescale/gianfar.o File size After adding 'const': text data bss dec hex filename 19249 192 0 19441 4bf1 drivers/net/ethernet/freescale/gianfar.o Signed-off-by:
-
Arvind Yadav authored
dev_pm_ops are not supposed to change at runtime. All functions working with dev_pm_ops provided by <linux/device.h> work with const dev_pm_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 18709 401 0 19110 4aa6 drivers/net/ethernet/smsc/smc91x.o File size After adding 'const': text data bss dec hex filename 18901 201 0 19102 4a9e drivers/net/ethernet/smsc/smc91x.o Signed-off-by:
-
Arvind Yadav authored
dev_pm_ops are not supposed to change at runtime. All functions working with dev_pm_ops provided by <linux/device.h> work with const dev_pm_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 15426 1256 0 16682 412a drivers/net/ethernet/ibm/ibmveth.o File size After adding 'const': text data bss dec hex filename 15618 1064 0 16682 412a drivers/net/ethernet/ibm/ibmveth.o Signed-off-by:
-
Daniel Borkmann authored
Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following: 0: (b7) r0 = 0 1: (18) r2 = 0xffff897e82304400 3: (7b) *(u64 *)(r1 +48) = r2 R2 leaks addr into ctx Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass: 0: (b7) r0 = 0 1: (7b) *(u64 *)(r1 +48) = r0 2: (18) r2 = 0xffff897e82304400 ; map 4: (db) lock *(u64 *)(r1 +48) += r2 5: (95) exit We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too: 0: (bf) r6 = r1 1: (7a) *(u64 *)(r10 -8) = 0 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x0 6: (85) call bpf_map_lookup_elem#1 7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0 9: (7b) *(u64 *)(r0 +0) = r3 10: (db) lock *(u64 *)(r0 +0) += r6 11: (b7) r0 = 0 12: (95) exit from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0 12: (95) exit Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this. Fixes: 1be7f75d ("bpf: enable non-root eBPF programs") Fixes: 17a52670 ("bpf: verifier (add verifier core)") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
-
Thomas Falcon authored
The driver currently creates RX/TX queues during device probe, but assigns IRQ's to them during device open. On reset, however, IRQ's are assigned when resetting the queues. If there is a reset while the device is closed and the device is later opened, the driver will request IRQ's twice, causing the open to fail. This patch assigns the IRQ's in the ibmvnic_init function after the queues are reset or initialized, ensuring IRQ's are only requested once. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Donald Sharp authored
Add to RTNL_FAMILY_IPMR, RTM_GETROUTE the ability to retrieve one S,G mroute from a specified table. *,G will return mroute information for just that particular mroute if it exists. This is because it is entirely possible to have more S's then can fit in one skb to return to the requesting process. Signed-off-by:
Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Martin KaFai Lau authored
The index is off-by-one when fp->aux->stack_depth has already been rounded up to 32. In particular, if stack_depth is 512, the index will be 16. The fix is to round_up and then takes -1 instead of round_down. [ 22.318680] ================================================================== [ 22.319745] BUG: KASAN: global-out-of-bounds in bpf_prog_select_runtime+0x48a/0x670 [ 22.320737] Read of size 8 at addr ffffffff82aadae0 by task sockex3/1946 [ 22.321646] [ 22.321858] CPU: 1 PID: 1946 Comm: sockex3 Tainted: G W 4.12.0-rc6-01680-g2ee87db3 #22 [ 22.323061] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.el7.centos 04/01/2014 [ 22.324260] Call Trace: [ 22.324612] dump_stack+0x67/0x99 [ 22.325081] print_address_description+0x1e8/0x290 [ 22.325734] ? bpf_prog_select_runtime+0x48a/0x670 [ 22.326360] kasan_report+0x265/0x350 [ 22.326860] __asan_report_load8_noabort+0x19/0x20 [ 22.327484] bpf_prog_select_runtime+0x48a/0x670 [ 22.328109] bpf_prog_load+0x626/0xd40 [ 22.328637] ? __bpf_prog_charge+0xc0/0xc0 [ 22.329222] ? check_nnp_nosuid.isra.61+0x100/0x100 [ 22.329890] ? __might_fault+0xf6/0x1b0 [ 22.330446] ? lock_acquire+0x360/0x360 [ 22.331013] SyS_bpf+0x67c/0x24d0 [ 22.331491] ? trace_hardirqs_on+0xd/0x10 [ 22.332049] ? __getnstimeofday64+0xaf/0x1c0 [ 22.332635] ? bpf_prog_get+0x20/0x20 [ 22.333135] ? __audit_syscall_entry+0x300/0x600 [ 22.333770] ? syscall_trace_enter+0x540/0xdd0 [ 22.334339] ? exit_to_usermode_loop+0xe0/0xe0 [ 22.334950] ? do_syscall_64+0x48/0x410 [ 22.335446] ? bpf_prog_get+0x20/0x20 [ 22.335954] do_syscall_64+0x181/0x410 [ 22.336454] entry_SYSCALL64_slow_path+0x25/0x25 [ 22.337121] RIP: 0033:0x7f263fe81f19 [ 22.337618] RSP: 002b:00007ffd9a3440c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141 [ 22.338619] RAX: ffffffffffffffda RBX: 0000000000aac5fb RCX: 00007f263fe81f19 [ 22.339600] RDX: 0000000000000030 RSI: 00007ffd9a3440d0 RDI: 0000000000000005 [ 22.340470] RBP: 0000000000a9a1e0 R08: 0000000000a9a1e0 R09: 0000009d00000001 [ 22.341430] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000010000 [ 22.342411] R13: 0000000000a9a023 R14: 0000000000000001 R15: 0000000000000003 [ 22.343369] [ 22.343593] The buggy address belongs to the variable: [ 22.344241] interpreters+0x80/0x980 [ 22.344708] [ 22.344908] Memory state around the buggy address: [ 22.345556] ffffffff82aad980: 00 00 00 04 fa fa fa fa 04 fa fa fa fa fa fa fa [ 22.346449] ffffffff82aada00: 00 00 00 00 00 fa fa fa fa fa fa fa 00 00 00 00 [ 22.347361] >ffffffff82aada80: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa [ 22.348301] ^ [ 22.349142] ffffffff82aadb00: 00 01 fa fa fa fa fa fa 00 00 00 00 00 00 00 00 [ 22.350058] ffffffff82aadb80: 00 00 07 fa fa fa fa fa 00 00 05 fa fa fa fa fa [ 22.350984] ================================================================== Fixes: b870aa90 ("bpf: use different interpreter depending on required stack size") Signed-off-by:
Alexei Starovoitov <ast@fb.com> Acked-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in netdev_err message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Michael Grzeschik says: ==================== arcnet: Collection of latest features Here we sum up the latest features to improve the arcnet framework. One patch is used to get feedback from the transfer queue about failed xfers by adding the err_skb message queue. Beside that we improve the backplane status that can be read by the PCI-based cards and offer that status via an extra sysfs attribute. In the last patch we add another card type PCIFB2. ==================== Signed-off-by: -
Michael Grzeschik authored
We add support for the PCIFB2 card from EAE. Beside other cards, this card has the backplane mode enabled by default. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
-
Michael Grzeschik authored
We read the backplane mode of each subcard from bits 2 and 3 of the misc register. Signed-off-by:
-
Michael Grzeschik authored
We add the sysfs interface the read back the backplane status of the interface. Signed-off-by:
-
Michael Grzeschik authored
We need to track the status of our queued packages. This way the driving process knows if failed packages need to be retransmitted. For this purpose we queue the transferred/failed packages back into the err_skb message queue added with some status information. Signed-off-by:
-
David S. Miller authored
Michael Grzeschik says: ==================== arcnet: Collection of latest fixes Here we sum up the recent fixes I collected on the way to use and stabilise the framework. Part of it is an possible deadlock that we prevent as well to fix the calculation of the dev_id that can be setup by an rotary encoder. Beside that we added an trivial spelling patch and fix some wrong and missing assignments that improves the code footprint. ==================== Signed-off-by:
-
