Conflicts:

MAINTAINERS
 - keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
 - simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
 - trivial
include/linux/ethtool.h
 - trivial, fix kdoc while at it
include/linux/skmsg.h
 - move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
 - add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
 - trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Even if the current mapping is correct for the 1 CPU and 2 CPU cases
(currently enetc is included in SoCs with up to 2 CPUs only), better
use a generic rule for the mapping to cover all possible cases.
The number of CPUs is the same as the number of interrupt vectors:

Per device Tx rings -
device_tx_ring[idx], where idx = 0..n_rings_total-1

Per interrupt vector Tx rings -
int_vector[i].ring[j], where i = 0..n_int_vects-1
			     j = 0..n_rings_per_v-1

Mapping rule -
n_rings_per_v = n_rings_total / n_int_vects
for i = 0..n_int_vects - 1:
	for j = 0..n_rings_per_v - 1:
		idx = n_int_vects * j + i
		int_vector[i].ring[j] <- device_tx_ring[idx]
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210409071613.28912-1-claudiu.manoil@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The blamed commit introduced a bit in the TX software buffer descriptor
structure for determining whether a BD is final or not; we rearm the TX
interrupt vector for every frame (hence final BD) transmitted.

But there is a problem with the patch: it replaced a condition whose
expression is a bool which was evaluated at the beginning of the "while"
loop with a bool expression that is evaluated on the spot: tx_swbd->is_eof.

The problem with the latter expression is that the tx_swbd has already
been incremented at that stage, so the tx_swbd->is_eof check is in fact
with the _next_ software BD. Which is _not_ final.

The effect is that the CPU is in 100% load with ksoftirqd because it
does not acknowledge the TX interrupt, so the handler keeps getting
called again and again.

The fix is to restore the code structure, and keep the local bool is_eof
variable, just to assign it the tx_swbd->is_eof value instead of
!!tx_swbd->skb.

Fixes: d504498d ("net: enetc: add a dedicated is_eof bit in the TX software BD")
Reported-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20210409192759.3895104-1-olteanv@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5-next 2021-04-09

This pr contains changes from  mlx5-next branch,
already reviewed on netdev and rdma mailing lists, links below.

1) From Leon, Dynamically assign MSI-X vectors count
Already Acked by Bjorn Helgaas.
https://patchwork.kernel.org/project/netdevbpf/cover/20210314124256.70253-1-leon@kernel.org/

2) Cleanup series:
https://patchwork.kernel.org/project/netdevbpf/cover/20210311070915.321814-1-saeed@kernel.org/

From Mark, E-Switch cleanups and refactoring, and the addition
of single FDB mode needed HW bits.

From Mikhael, Remove unused struct field

From Saeed, Cleanup W=1 prototype warning

From Zheng, Esw related cleanup

From Tariq, User order-0 page allocation for EQs

* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks
  net/mlx5: Dynamically assign MSI-X vectors count
  net/mlx5: Add dynamic MSI-X capabilities bits
  PCI/IOV: Add sysfs MSI-X vector assignment interface
  net/mlx5: Use order-0 allocations for EQs
  net/mlx5: Add IFC bits needed for single FDB mode
  net/mlx5: E-Switch, Refactor send to vport to be more generic
  RDMA/mlx5: Use representor E-Switch when getting netdev and metadata
  net/mlx5: E-Switch, Add eswitch pointer to each representor
  net/mlx5: E-Switch, Add match on vhca id to default send rules
  net/mlx5: Remove unused mlx5_core_health member recover_work
  net/mlx5: simplify the return expression of mlx5_esw_offloads_pair()
  net/mlx5: Cleanup prototype warning
====================

Link: https://lore.kernel.org/r/20210409200704.10886-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This loop will try to unmap enetc_unmap_tx_buff[-1] and crash.

Fixes: 9d2b68cc ("net: enetc: add support for XDP_REDIRECT")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/YHBHfCY/yv3EnM9z@mwandaSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eliminate the following coccicheck warning:

drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c:529:3-9: WARNING:
 NULL check before some freeing functions is not needed.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c:533:2-8: WARNING:
 NULL check before some freeing functions is not needed.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c:161:2-7: WARNING:
 NULL check before some freeing functions is not needed.
drivers/net/ethernet/chelsio/cxgb4/clip_tbl.c:327:3-9: WARNING:
 NULL check before some freeing functions is not needed.
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20210409115339.4598-1-linqiheng@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Heiner Kallweit says:

====================
net: make PHY PM ops a no-op if MAC driver manages PHY PM

Resume callback of the PHY driver is called after the one for the MAC
driver. The PHY driver resume callback calls phy_init_hw(), and this is
potentially problematic if the MAC driver calls phy_start() in its resume
callback. One issue was reported with the fec driver and a KSZ8081 PHY
which seems to become unstable if a soft reset is triggered during aneg.

The new flag allows MAC drivers to indicate that they take care of
suspending/resuming the PHY. Then the MAC PM callbacks can handle
any dependency between MAC and PHY PM.
====================

Link: https://lore.kernel.org/r/9e695411-ab1d-34fe-8b90-3e8192ab84f6@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the new mac_managed_pm flag to indicate that the driver takes care
of PHY power management.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use the new mac_managed_pm flag to work around an issue with KSZ8081 PHY
that becomes unstable when a soft reset is triggered during aneg.
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Resume callback of the PHY driver is called after the one for the MAC
driver. The PHY driver resume callback calls phy_init_hw(), and this is
potentially problematic if the MAC driver calls phy_start() in its resume
callback. One issue was reported with the fec driver and a KSZ8081 PHY
which seems to become unstable if a soft reset is triggered during aneg.

The new flag allows MAC drivers to indicate that they take care of
suspending/resuming the PHY. Then the MAC PM callbacks can handle
any dependency between MAC and PHY PM.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit e880f8b3.

1) Patch has not been properly tested, and is wrong [1]
2) Patch submission did not include TCP maintainer (this is me)

[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 8426 Comm: syz-executor478 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__tcp_select_window+0x56d/0xad0 net/ipv4/tcp_output.c:3015
Code: 44 89 ff e8 d5 cd f0 f9 45 39 e7 0f 8d 20 ff ff ff e8 f7 c7 f0 f9 44 89 e3 e9 13 ff ff ff e8 ea c7 f0 f9 44 89 e0 44 89 e3 99 <f7> 7c 24 04 29 d3 e9 fc fe ff ff e8 d3 c7 f0 f9 41 f7 dc bf 1f 00
RSP: 0018:ffffc9000184fac0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff87832e76 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff87832e14 R11: 0000000000000000 R12: 0000000000000000
R13: 1ffff92000309f5c R14: 0000000000000000 R15: 0000000000000000
FS:  00000000023eb300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc2b5f426c0 CR3: 000000001c5cf000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tcp_select_window net/ipv4/tcp_output.c:264 [inline]
 __tcp_transmit_skb+0xa82/0x38f0 net/ipv4/tcp_output.c:1351
 tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
 tcp_send_active_reset+0x475/0x8e0 net/ipv4/tcp_output.c:3449
 tcp_disconnect+0x15a9/0x1e60 net/ipv4/tcp.c:2955
 inet_shutdown+0x260/0x430 net/ipv4/af_inet.c:905
 __sys_shutdown_sock net/socket.c:2189 [inline]
 __sys_shutdown_sock net/socket.c:2183 [inline]
 __sys_shutdown+0xf1/0x1b0 net/socket.c:2201
 __do_sys_shutdown net/socket.c:2209 [inline]
 __se_sys_shutdown net/socket.c:2207 [inline]
 __x64_sys_shutdown+0x50/0x70 net/socket.c:2207
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: e880f8b3 ("tcp: Reset tcp connections in SYN-SENT state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Manoj Basapathi <manojbm@codeaurora.org>
Cc: Sauvik Saha <ssaha@codeaurora.org>
Link: https://lore.kernel.org/r/20210409170237.274904-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

DCCP is virtually never used, so no need to use space in struct net for it.

Put the pernet ipv4/v6 socket in the dccp ipv4/ipv6 modules instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20210408174502.1625-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.12-rc7, including fixes from can, ipsec,
  mac80211, wireless, and bpf trees.

  No scary regressions here or in the works, but small fixes for 5.12
  changes keep coming.

  Current release - regressions:

   - virtio: do not pull payload in skb->head

   - virtio: ensure mac header is set in virtio_net_hdr_to_skb()

   - Revert "net: correct sk_acceptq_is_full()"

   - mptcp: revert "mptcp: provide subflow aware release function"

   - ethernet: lan743x: fix ethernet frame cutoff issue

   - dsa: fix type was not set for devlink port

   - ethtool: remove link_mode param and derive link params from driver

   - sched: htb: fix null pointer dereference on a null new_q

   - wireless: iwlwifi: Fix softirq/hardirq disabling in
     iwl_pcie_enqueue_hcmd()

   - wireless: iwlwifi: fw: fix notification wait locking

   - wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
     rtnl dependency

  Current release - new code bugs:

   - napi: fix hangup on napi_disable for threaded napi

   - bpf: take module reference for trampoline in module

   - wireless: mt76: mt7921: fix airtime reporting and related tx hangs

   - wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
     config command

  Previous releases - regressions:

   - rfkill: revert back to old userspace API by default

   - nfc: fix infinite loop, refcount & memory leaks in LLCP sockets

   - let skb_orphan_partial wake-up waiters

   - xfrm/compat: Cleanup WARN()s that can be user-triggered

   - vxlan, geneve: do not modify the shared tunnel info when PMTU
     triggers an ICMP reply

   - can: fix msg_namelen values depending on CAN_REQUIRED_SIZE

   - can: uapi: mark union inside struct can_frame packed

   - sched: cls: fix action overwrite reference counting

   - sched: cls: fix err handler in tcf_action_init()

   - ethernet: mlxsw: fix ECN marking in tunnel decapsulation

   - ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx

   - ethernet: i40e: fix receiving of single packets in xsk zero-copy
     mode

   - ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic

  Previous releases - always broken:

   - bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET

   - bpf: Refcount task stack in bpf_get_task_stack

   - bpf, x86: Validate computation of branch displacements

   - ieee802154: fix many similar syzbot-found bugs
       - fix NULL dereferences in netlink attribute handling
       - reject unsupported operations on monitor interfaces
       - fix error handling in llsec_key_alloc()

   - xfrm: make ipv4 pmtu check honor ip header df

   - xfrm: make hash generation lock per network namespace

   - xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
     offload

   - ethtool: fix incorrect datatype in set_eee ops

   - xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
     model

   - openvswitch: fix send of uninitialized stack memory in ct limit
     reply

  Misc:

   - udp: add get handling for UDP_GRO sockopt"

* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
  net: fix hangup on napi_disable for threaded napi
  net: hns3: Trivial spell fix in hns3 driver
  lan743x: fix ethernet frame cutoff issue
  net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
  net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
  net: dsa: lantiq_gswip: Don't use PHY auto polling
  net: sched: sch_teql: fix null-pointer dereference
  ipv6: report errors for iftoken via netlink extack
  net: sched: fix err handler in tcf_action_init()
  net: sched: fix action overwrite reference counting
  Revert "net: sched: bump refcount for new action in ACT replace mode"
  ice: fix memory leak of aRFS after resuming from suspend
  i40e: Fix sparse warning: missing error code 'err'
  i40e: Fix sparse error: 'vsi->netdev' could be null
  i40e: Fix sparse error: uninitialized symbol 'ring'
  i40e: Fix sparse errors in i40e_txrx.c
  i40e: Fix parameters in aq_get_phy_register()
  nl80211: fix beacon head validation
  bpf, x86: Validate computation of branch displacements for x86-32
  bpf, x86: Validate computation of branch displacements for x86-64
  ...

Pull io_uring fixes from Jens Axboe:
 "Two minor fixups for the reissue logic, and one for making sure that
  unbounded work is canceled on io-wq exit"

* tag 'io_uring-5.12-2021-04-09' of git://git.kernel.dk/linux-block:
  io-wq: cancel unbounded works on io-wq destroy
  io_uring: fix rw req completion
  io_uring: clear F_REISSUE right after getting it

Pull devicetree fixes from Rob Herring:

 - Fix fw_devlink failure with ".*,nr-gpios" properties

 - Doc link reference fixes from Mauro

 - Fixes for unaligned FDT handling found on OpenRisc. First, avoid
   crash with better error handling when unflattening an unaligned FDT.
   Second, fix memory allocations for FDTs to ensure alignment.

* tag 'devicetree-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: property: fw_devlink: do not link ".*,nr-gpios"
  dt-bindings:iio:adc: update motorola,cpcap-adc.yaml reference
  dt-bindings: fix references for iio-bindings.txt
  dt-bindings: don't use ../dir for doc references
  of: unittest: overlay: ensure proper alignment of copied FDT
  of: properly check for error returned by fdt_get_name()

Pull drm fixes from Dave Airlie:
 "Was relatively quiet this week, but still a few pulls came in, pretty
  much small fixes across the board, a couple of regression fixes in the
  amdgpu/radeon code, msm has a few minor fixes across the board, a
  panel regression fix also.

  amdgpu:
   - DCN3 fix
   - Fix CAC setting regression for TOPAZ
   - Fix ttm regression

  radeon:
   - Fix ttm regression

  msm:
   - a5xx/a6xx timestamp fix
   - microcode version check
   - fail path fix
   - block programming fix
   - error removal fix

  i915:
   - Fix invalid access to ACPI _DSM objects

  xen:
   - Fix use-after-free in xen
   - minor duplicate defintion cleanup

  vc4:
   - Reduce fifo threshold on hvs4 to fix a fifo full error
   - minor redunantant assignment cleanup

  panel:
   - Disable TE support for Droid4 and N950"

* tag 'drm-fixes-2021-04-10' of git://anongit.freedesktop.org/drm/drm:
  drm/vc4: crtc: Reduce PV fifo threshold on hvs4
  drm/vc4: plane: Remove redundant assignment
  drm/amdgpu/smu7: fix CAC setting on TOPAZ
  drm/radeon: Fix size overflow
  drm/amdgpu: Fix size overflow
  drm/i915: Fix invalid access to ACPI _DSM objects
  drm/amd/display: Add missing mask for DCN3
  drm/panel: panel-dsi-cm: disable TE for now
  drm/msm/disp/dpu1: program 3d_merge only if block is attached
  drm/msm: a6xx: fix version check for the A650 SQE microcode
  drm/msm: Fix a5xx/a6xx timestamps
  drm/msm: Fix removal of valid error case when checking speed_bin
  drm/msm: Set drvdata to NULL when msm_drm_init() fails
  drivers: gpu: drm: xen_drm_front_drm_info is declared twice
  gpu/xen: Fix a use after free in xen_drm_drv_init

napi_disable() is subject to an hangup, when the threaded
mode is enabled and the napi is under heavy traffic.

If the relevant napi has been scheduled and the napi_disable()
kicks in before the next napi_threaded_wait() completes - so
that the latter quits due to the napi_disable_pending() condition,
the existing code leaves the NAPI_STATE_SCHED bit set and the
napi_disable() loop waiting for such bit will hang.

This patch addresses the issue by dropping the NAPI_STATE_DISABLE
bit test in napi_thread_wait(). The later napi_threaded_poll()
iteration will take care of clearing the NAPI_STATE_SCHED.

This also addresses a related problem reported by Jakub:
before this patch a napi_disable()/napi_enable() pair killed
the napi thread, effectively disabling the threaded mode.
On the patched kernel napi_disable() simply stops scheduling
the relevant thread.

v1 -> v2:
  - let the main napi_thread_poll() loop clear the SCHED bit
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 29863d41 ("net: implement threaded-able napi poll loop support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some trivial spelling mistakes which caught my eye during the
review of the code.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Link: https://lore.kernel.org/r/20210409074223.32480-1-salil.mehta@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ethernet frame length is calculated incorrectly. Depending on
the value of RX_HEAD_PADDING, this may result in ethernet frames
that are too short (cut off at the end), or too long (garbage added
to the end).

Fix by calculating the ethernet frame length correctly. For added
clarity, use the ETH_FCS_LEN constant in the calculation.

Many thanks to Heiner Kallweit for suggesting this solution.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 3e21a10f ("lan743x: trim all 4 bytes of the FCS; not just 2")
Link: https://lore.kernel.org/lkml/20210408172353.21143-1-TheSven73@gmail.com/Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Link: https://lore.kernel.org/r/20210409003904.8957-1-TheSven73@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

[<vendor>,]nr-gpios property is used by some GPIO drivers[0] to indicate
the number of GPIOs present on a system, not define a GPIO. nr-gpios is
not configured by #gpio-cells and can't be parsed along with other
"*-gpios" properties.

nr-gpios without the "<vendor>," prefix is not allowed by the DT
spec[1], so only add exception for the ",nr-gpios" suffix and let the
error message continue being printed for non-compliant implementations.

[0] nr-gpios is referenced in Documentation/devicetree/bindings/gpio:
 - gpio-adnp.txt
 - gpio-xgene-sb.txt
 - gpio-xlp.txt
 - snps,dw-apb-gpio.yaml

[1] Link: https://github.com/devicetree-org/dt-schema/blob/cb53a16a1eb3e2169ce170c071e47940845ec26e/schemas/gpio/gpio-consumer.yaml#L20

Fixes errors such as:
  OF: /palmbus@300000/gpio@600: could not find phandle

Fixes: 7f00be96 ("of: property: Add device link support for interrupt-parent, dmas and -gpio(s)")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: stable@vger.kernel.org # v5.5+
Link: https://lore.kernel.org/r/20210405222540.18145-1-ilya.lipnitskiy@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

Changeset 1ca9d1b1 ("dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion")
renamed: Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
to: Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml.

Update its cross-reference accordingly.

Fixes: 1ca9d1b1 ("dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/3e205e5fa701e4bc15d39d6ac1f57717df2bb4c6.1617972339.git.mchehab+huawei@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

The iio-bindings.txt was converted into two files and merged
at the dt-schema git tree at:

	https://github.com/devicetree-org/dt-schema

Yet, some documents still refer to the old file. Fix their
references, in order to point to the right URL.

Fixes: dba91f82 ("dt-bindings:iio:iio-binding.txt Drop file as content now in dt-schema")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4efd81eca266ca0875d3bf9d1672097444146c69.1617972339.git.mchehab+huawei@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

As documents have been renamed and moved around, their
references will break, but this will be unnoticed, as the
script which checks for it won't handle "../" references.

So, replace them by the full patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/68d3a1244119d1f2829c375b0ef554cf348bc89f.1617972339.git.mchehab+huawei@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Merge tag 'drm-intel-fixes-2021-04-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix invalid access to ACPI _DSM objects (Takashi)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YHAW6NInrybUoat6@intel.com

drm-misc-fixes for v5.12-rc7:
- Fix use-after-free in xen.
- Reduce fifo threshold on hvs4 to fix a fifo full error.
- Disable TE support for Droid4 and N950.
- Small compiler fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e7647dd9-60c3-9dfd-a377-89d717212e13@linux.intel.com

Pull selinux fixes from Paul Moore:
 "Three SELinux fixes.

  These fix known problems relating to (re)loading SELinux policy or
  changing the policy booleans, and pass our test suite without problem"

* tag 'selinux-pr-20210409' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix race between old and new sidtab
  selinux: fix cond_list corruption when changing booleans
  selinux: make nslot handling in avtab more robust

Pull vdpa/mlx5 fixes from Michael Tsirkin:
 "Last minute fixes.

  These all look like something we are better off having
  than not ..."

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Fix suspend/resume index restoration
  vdpa/mlx5: Fix wrong use of bit numbers
  vdpa/mlx5: Retrieve BAR address suitable any function
  vdpa/mlx5: Use the correct dma device when registering memory
  vdpa/mlx5: should exclude header length and fcs from mtu

Pull remoteproc fixes from Bjorn Andersson:
 "This fixes an issue with firmware loading on the TI K3 PRU, fixes
  compatibility with GNU binutils for the same and resolves link error
  due to a 64-bit division in the Qualcomm PIL info.

  It also recognizes Mathieu Poirier as co-maintainer of the remoteproc
  and rpmsg subsystems"

* tag 'rproc-v5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  remoteproc: pru: Fix firmware loading crashes on K3 SoCs
  remoteproc: pru: Fix loading of GNU Binutils ELF
  MAINTAINERS: Add co-maintainer for remoteproc/RPMSG subsystems
  remoteproc: qcom: pil_info: avoid 64-bit division

Pull xen fix from Juergen Gross:
 "A single fix of a 5.12 patch for the rather uncommon problem of
  running as a Xen guest with a real time kernel config"

* tag 'for-linus-5.12b-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/evtchn: Change irq_info lock to raw_spinlock_t

Pull ACPI fix from Rafael Wysocki:
 "Fix a build issue introduced by a previous fix in the ACPI processor
  driver (Vitaly Kuznetsov)"

* tag 'acpi-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: processor: Fix build when CONFIG_ACPI_PROCESSOR=m

When we suspend the VM, the VDPA interface will be reset. When the VM is
resumed again, clear_virtqueues() will clear the available and used
indices resulting in hardware virqtqueue objects becoming out of sync.
We can avoid this function alltogether since qemu will clear them if
required, e.g. when the VM went through a reboot.

Moreover, since the hw available and used indices should always be
identical on query and should be restored to the same value same value
for virtqueues that complete in order, we set the single value provided
by set_vq_state(). In get_vq_state() we return the value of hardware
used index.

Fixes: b35ccebe ("vdpa/mlx5: Restore the hardware used index after change map")
Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-6-elic@nvidia.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

VIRTIO_F_VERSION_1 is a bit number. Use BIT_ULL() with mask
conditionals.

Also, in mlx5_vdpa_is_little_endian() use BIT_ULL for consistency with
the rest of the code.

Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-5-elic@nvidia.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

struct mlx5_core_dev has a bar_addr field that contains the correct bar
address for the function regardless of whether it is pci function or sub
function. Use it.

Fixes: 1958fc2f ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-4-elic@nvidia.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

In cases where the vdpa instance uses a SF (sub function), the DMA
device is the parent device. Use a function to retrieve the correct DMA
device.

Fixes: 1958fc2f ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-3-elic@nvidia.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

When feature VIRTIO_NET_F_MTU is negotiated on mlx5_vdpa,
22 extra bytes worth of MTU length is shown in guest.
This is because the mlx5_query_port_max_mtu API returns
the "hardware" MTU value, which does not just contain the
 Ethernet payload, but includes extra lengths starting
from the Ethernet header up to the FCS altogether.

Fix the MTU so packets won't get dropped silently.

Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-2-elic@nvidia.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

drivers/usb/core/hub.c: usb_new_device() contains the following:

        /* By default, forbid autosuspend for all devices.  It will be
         * allowed for hubs during binding.
         */
        usb_disable_autosuspend(udev);

So for anything which is not a hub, such as btusb devices, autosuspend is
disabled by default and we must call usb_enable_autosuspend(udev) to
enable it.

This means that the "Fix the autosuspend enable and disable" commit,
which drops the usb_enable_autosuspend() call when the enable_autosuspend
module option is true, is completely wrong, revert it.

This reverts commit 7bd9fb05.

Cc: Hui Wang <hui.wang@canonical.com>
Fixes: 7bd9fb05 ("Bluetooth: btusb: Fix the autosuspend enable and disable")
Acked-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull cifs fixes from Steve French:
 "Three cifs/smb3 fixes, two for stable: a reconnect fix and a fix for
  display of devnames with special characters"

* tag '5.12-rc6-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: escape spaces in share names
  fs: cifs: Remove unnecessary struct declaration
  cifs: On cifs_reconnect, resolve the hostname again.

some more minor fixes:
- a5xx/a6xx timestamp fix
- microcode version check
- fail path fix
- block programming fix
- error removal fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsMj7Nv3vVaVWMxPy8Y=Z_SnZmVKhKgKDxDYTr9rGN_+w@mail.gmail.com

nlh is being checked for validtity two times when it is dereferenced in
this function. Check for validity again when updating the flags through
nlh pointer to make the dereferencing safe.

CC: <stable@vger.kernel.org>
Addresses-Coverity: ("NULL pointer dereference")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Martin Blumenstingl says:

====================
lantiq: GSWIP: two more fixes

after my last patch got accepted and is now in net as commit
3e6fdeb2 ("net: dsa: lantiq_gswip: Let GSWIP automatically set
the xMII clock") [0] some more people from the OpenWrt community
(many thanks to everyone involved) helped test the GSWIP driver: [1]

It turns out that the previous fix does not work for all boards.
There's no regression, but it doesn't fix as many problems as I
thought. This is why two more fixes are needed:
- the first one solves many (four known but probably there are
  a few extra hidden ones) reported bugs with the GSWIP where no
  traffic would flow. Not all circumstances are fully understood
  but testing shows that switching away from PHY auto polling
  solves all of them
- while investigating the different problems which are addressed
  by the first patch some small issues with the existing code were
  found. These are addressed by the second patch

Changes since v1 at [0]:
- Don't configure the link parameters in gswip_phylink_mac_config
  (as we're using the "modern" way in gswip_phylink_mac_link_up).
  Thanks to Andrew for the hint with the phylink documentation.
- Clarify that GSWIP_MII_CFG_RMII_CLK is ignored by the hardware in
  the description of the second patch as suggested by Hauke
- Don't set GSWIP_MII_CFG_RGMII_IBS in the second patch as we don't
  have any hardware available for testing this. The patch
  description now also reflects this.
- Added Andrew's Reviewed-by to the first patch (thank you!)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>