Looks like devlinks_xa_find_get() was intended to get the mark
from the @filter argument. It doesn't actually use @filter, passing
DEVLINK_REGISTERED to xa_find_fn() directly. Walking marks other
than registered is unlikely so drop @filter argument completely.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The start variables made the code clearer when we had to access
cb->args[0] directly, as the name args doesn't explain much.
Now that we use a structure to hold state this seems no longer
needed.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create a dump context structure instead of using cb->args
as an unsigned long array. This is a pure conversion which
is intended to be as much of a noop as possible.
Subsequent changes will use this to simplify the code.

The two non-trivial parts are:
 - devlink_nl_cmd_health_reporter_dump_get_dumpit() checks args[0]
   to see if devlink_fmsg_dumpit() has already been called (whether
   this is the first msg), but doesn't use the exact value, so we
   can drop the local variable there already
 - devlink_nl_cmd_region_read_dumpit() uses args[0] for address
   but we'll use args[1] now, shouldn't matter
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We encourage casting struct netlink_callback::ctx to a local
struct (in a comment above the field). Provide a convenience
macro for checking if the local struct fits into the ctx.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move out the netlink glue into a separate file.
Leave the ops in the old file because we'd have to export a ton
of functions. Going forward we should switch to split ops which
will let us to put the new ops in the netlink.c file.

Pure code move, no functional changes.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move core code into a separate file. It's spread around the main
file which makes refactoring and figuring out how devlink works
harder.

Move the xarray, all the most core devlink instance code out like
locking, ref counting, alloc, register, etc. Leave port stuff in
leftover.c, if we want to move port code it'd probably be to its
own file.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To make the upcoming change a pure(er?) code move rename
devlink_netdevice_event -> devlink_port_netdevice_event.
This makes it clear that it only touches ports and doesn't
belong cleanly in the core.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The devlink code is hard to navigate with 13kLoC in one file.
I really like the way Michal split the ethtool into per-command
files and core. It'd probably be too much to split it all up,
but we can at least separate the core parts out of the per-cmd
implementations and put it in a directory so that new commands
can be separate files.

Move the code, subsequent commit will do a partial split.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: simplify IPA interrupt handling

One of the IPA's two IRQs fires when data on a suspended channel is
available (to request that the channel--or system--be resumed to
recieve the pending data).  This interrupt also handles a few
conditions signaled by the embedded microcontroller.

For this "IPA interrupt", the current code requires a handler to be
dynamically registered for each interrupt condition.  Any condition
that has no registered handler is quietly ignored.  This design is
derived from the downstream IPA driver implementation.

There isn't any need for this complexity.  Even in the downstream
code, only four of the available 30 or so IPA interrupt conditions
are ever handled.  So these handlers can pretty easily just be
called directly in the main IRQ handler function.

This series simplifies the interrupt handling code by having the
small number of IPA interrupt handlers be called directly, rather
than having them be registered dynamically.

Version 2 just adds a missing forward-reference, as suggested by
Caleb.
====================

Link: https://lore.kernel.org/r/20230104175233.2862874-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We can call the two IPA interrupt handler functions directly;
there's no need to maintain the array of handler function pointers
any more.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The dynamic assignment of IPA interrupt handlers isn't needed; we
only handle three IPA interrupt types, and their handler functions
are now assigned directly.  We can get rid of ipa_interrupt_add()
and ipa_interrupt_remove() now, because they serve no purpose.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Declare the microcontroller IPA interrupt handler publicly, and
assign it directly in ipa_interrupt_config().  Make the SUSPEND IPA
interrupt handler public, and rename it ipa_power_suspend_handler().
Assign it directly in ipa_interrupt_config() as well.

This makes it unnecessary to do this in ipa_interrupt_add().  Make
similar changes for removing IPA interrupt handlers.

The next two patches will finish the cleanup, removing the
add/remove functions and the handler array entirely.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Expose ipa_interrupt_enable() and have functions that register
IPA interrupt handlers enable them directly, rather than having the
registration process do that.  Do the same for disabling IPA
interrupt handlers.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create new function ipa_interrupt_enable() to encapsulate enabling
one of the IPA interrupt types.  Introduce ipa_interrupt_disable()
to reverse that operation.  Add a helper function to factor out the
common register update used by both.

Use these in ipa_interrupt_add() and ipa_interrupt_remove().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The prototype for an IPA interrupt handler supplies the IPA
interrupt ID, so it's possible to use a single function to handle
any type of microcontroller interrupt.

Introduce ipa_uc_interrupt_handler(), which calls the event or the
response handler depending on the IRQ ID provided.  Register the new
function as the handler for both microcontroller IPA interrupt types.

The called functions don't use their "irq_id" arguments, so remove
them.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Lorenzo Bianconi says:

====================
enetc: unlock XDP_REDIRECT for XDP non-linear buffers

Unlock XDP_REDIRECT for S/G XDP buffer and rely on XDP stack to properly
take care of the frames.
Rely on XDP_FLAGS_HAS_FRAGS flag to check if it really necessary to access
non-linear part of the xdp_buff/xdp_frame.
====================

Link: https://lore.kernel.org/r/cover.1672840490.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move XDP skb_shared_info structure initialization in from
enetc_map_rx_buff_to_xdp() to enetc_add_rx_buff_to_xdp() and do not always
access skb_shared_info in the xdp_buff/xdp_frame since it is located in a
different cacheline with respect to hard_start and data xdp pointers.
Rely on XDP_FLAGS_HAS_FRAGS flag to check if it really necessary to access
non-linear part of the xdp_buff/xdp_frame.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove xdp_redirect_sg counter and the related ethtool entry since it is
no longer used.
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Even if full XDP_REDIRECT is not supported yet for non-linear XDP buffers
since we allow redirecting just into CPUMAPs, unlock XDP_REDIRECT for
S/G XDP buffer and rely on XDP stack to properly take care of the
frames.
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, wifi, and netfilter.

  Current release - regressions:

   - bpf: fix nullness propagation for reg to reg comparisons, avoid
     null-deref

   - inet: control sockets should not use current thread task_frag

   - bpf: always use maximal size for copy_array()

   - eth: bnxt_en: don't link netdev to a devlink port for VFs

  Current release - new code bugs:

   - rxrpc: fix a couple of potential use-after-frees

   - netfilter: conntrack: fix IPv6 exthdr error check

   - wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes

   - eth: dsa: qca8k: various fixes for the in-band register access

   - eth: nfp: fix schedule in atomic context when sync mc address

   - eth: renesas: rswitch: fix getting mac address from device tree

   - mobile: ipa: use proper endpoint mask for suspend

  Previous releases - regressions:

   - tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
     Jiri / python tests

   - net: tc: don't intepret cls results when asked to drop, fix
     oob-access

   - vrf: determine the dst using the original ifindex for multicast

   - eth: bnxt_en:
      - fix XDP RX path if BPF adjusted packet length
      - fix HDS (header placement) and jumbo thresholds for RX packets

   - eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
     avoid memory corruptions

  Previous releases - always broken:

   - ulp: prevent ULP without clone op from entering the LISTEN status

   - veth: fix race with AF_XDP exposing old or uninitialized
     descriptors

   - bpf:
      - pull before calling skb_postpull_rcsum() (fix checksum support
        and avoid a WARN())
      - fix panic due to wrong pageattr of im->image (when livepatch and
        kretfunc coexist)
      - keep a reference to the mm, in case the task is dead

   - mptcp: fix deadlock in fastopen error path

   - netfilter:
      - nf_tables: perform type checking for existing sets
      - nf_tables: honor set timeout and garbage collection updates
      - ipset: fix hash:net,port,net hang with /0 subnet
      - ipset: avoid hung task warning when adding/deleting entries

   - selftests: net:
      - fix cmsg_so_mark.sh test hang on non-x86 systems
      - fix the arp_ndisc_evict_nocarrier test for IPv6

   - usb: rndis_host: secure rndis_query check against int overflow

   - eth: r8169: fix dmar pte write access during suspend/resume with
     WOL

   - eth: lan966x: fix configuration of the PCS

   - eth: sparx5: fix reading of the MAC address

   - eth: qed: allow sleep in qed_mcp_trace_dump()

   - eth: hns3:
      - fix interrupts re-initialization after VF FLR
      - fix handling of promisc when MAC addr table gets full
      - refine the handling for VF heartbeat

   - eth: mlx5:
      - properly handle ingress QinQ-tagged packets on VST
      - fix io_eq_size and event_eq_size params validation on big endian
      - fix RoCE setting at HCA level if not supported at all
      - don't turn CQE compression on by default for IPoIB

   - eth: ena:
      - fix toeplitz initial hash key value
      - account for the number of XDP-processed bytes in interface stats
      - fix rx_copybreak value update

  Misc:

   - ethtool: harden phy stat handling against buggy drivers

   - docs: netdev: convert maintainer's doc from FAQ to a normal
     document"

* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
  caif: fix memory leak in cfctrl_linkup_request()
  inet: control sockets should not use current thread task_frag
  net/ulp: prevent ULP without clone op from entering the LISTEN status
  qed: allow sleep in qed_mcp_trace_dump()
  MAINTAINERS: Update maintainers for ptp_vmw driver
  usb: rndis_host: Secure rndis_query check against int overflow
  net: dpaa: Fix dtsec check for PCS availability
  octeontx2-pf: Fix lmtst ID used in aura free
  drivers/net/bonding/bond_3ad: return when there's no aggregator
  netfilter: ipset: Rework long task execution when adding/deleting entries
  netfilter: ipset: fix hash:net,port,net hang with /0 subnet
  net: sparx5: Fix reading of the MAC address
  vxlan: Fix memory leaks in error path
  net: sched: htb: fix htb_classify() kernel-doc
  net: sched: cbq: dont intepret cls results when asked to drop
  net: sched: atm: dont intepret cls results when asked to drop
  dt-bindings: net: marvell,orion-mdio: Fix examples
  dt-bindings: net: sun8i-emac: Add phy-supply property
  net: ipa: use proper endpoint mask for suspend
  selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
  ...

Pull gpio fixes from Bartosz Golaszewski:
 "A reference leak fix, two fixes for using uninitialized variables and
  more drivers converted to using immutable irqchips:

   - fix a reference leak in gpio-sifive

   - fix a potential use of an uninitialized variable in core gpiolib

   - fix a potential use of an uninitialized variable in gpio-pca953x

   - make GPIO irqchips immutable in gpio-pmic-eic-sprd, gpio-eic-sprd
     and gpio-sprd"

* tag 'gpio-fixes-for-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sifive: Fix refcount leak in sifive_gpio_probe
  gpio: sprd: Make the irqchip immutable
  gpio: pmic-eic-sprd: Make the irqchip immutable
  gpio: eic-sprd: Make the irqchip immutable
  gpio: pca953x: avoid to use uninitialized value pinctrl
  gpiolib: Fix using uninitialized lookup-flags on ACPI platforms

Pull fbdev fixes from Helge Deller:

 - Fix Matrox G200eW initialization failure

 - Fix build failure of offb driver when built as module

 - Optimize stack usage in omapfb

* tag 'fbdev-for-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: omapfb: avoid stack overflow warning
  fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB
  fbdev: atyfb: use strscpy() to instead of strncpy()
  fbdev: omapfb: use strscpy() to instead of strncpy()
  fbdev: make offb driver tristate

Siddharth Vadapalli says:

====================
Add support for QSGMII mode for J721e CPSW9G to am65-cpsw driver

Add compatible to am65-cpsw driver for J721e CPSW9G, which contains 8
external ports and 1 internal host port.

Add support to power on and power off the SERDES PHY which is used by the
CPSW MAC.

=========
Changelog
=========
v5:
https://lore.kernel.org/r/20221109042203.375042-1-s-vadapalli@ti.com/
v4:
https://lore.kernel.org/r/20221108080606.124596-1-s-vadapalli@ti.com/
v3:
https://lore.kernel.org/r/20221026090957.180592-1-s-vadapalli@ti.com/
v2:
https://lore.kernel.org/r/20221018085810.151327-1-s-vadapalli@ti.com/
v1:
https://lore.kernel.org/r/20220914095053.189851-1-s-vadapalli@ti.com/
====================

Link: https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Use PHY framework APIs to initialize the SERDES PHY connected to CPSW MAC.

Define the functions am65_cpsw_disable_phy(), am65_cpsw_enable_phy(),
am65_cpsw_disable_serdes_phy() and am65_cpsw_enable_serdes_phy().

Add new member "serdes_phy" to struct "am65_cpsw_slave_data" to store the
SERDES PHY for each port, if it exists. Use it later while disabling the
SERDES PHY for each port.

Power on and initialize the SerDes PHY in am65_cpsw_nuss_init_slave_ports()
by invoking am65_cpsw_enable_serdes_phy().

Power off the SerDes PHY in am65_cpsw_nuss_remove() by invoking
am65_cpsw_disable_serdes_phy().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

CPSW9G in J721e supports additional modes like QSGMII.
Add new compatible for J721e in am65-cpsw driver.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Update bindings for TI K3 J721e SoC which contains 9 ports (8 external
ports) CPSW9G module and add compatible for it.

Changes made:
    - Add new compatible ti,j721e-cpswxg-nuss for CPSW9G.
    - Extend pattern properties for new compatible.
    - Change maximum number of CPSW ports to 8 for new compatible.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The dsi_irq_stats structure is a little too big to fit on the
stack of a 32-bit task, depending on the specific gcc options:

fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs':
fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Since this is only a debugfs file, performance is not critical,
so just dynamically allocate it, and print an error message
in there in place of a failure code when the allocation fails.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>

When linktype is unknown or kzalloc failed in cfctrl_linkup_request(),
pkt is not released. Add release process to error path.

Fixes: b482cd20 ("net-caif: add CAIF core protocol stack")
Fixes: 8d545c8f ("caif: Disconnect without waiting for response")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230104065146.1153009-1-shaozhengchao@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Because ICMP handlers run from softirq contexts,
they must not use current thread task_frag.

Previously, all sockets allocated by inet_ctl_sock_create()
would use the per-socket page fragment, with no chance of
recursion.

Fixes: 98123866 ("Treewide: Stop corrupting socket's task_frag")
Reported-by: syzbot+bebc6f1acdf4cbb79b03@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Benjamin Coddington <bcodding@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20230103192736.454149-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When an ULP-enabled socket enters the LISTEN status, the listener ULP data
pointer is copied inside the child/accepted sockets by sk_clone_lock().

The relevant ULP can take care of de-duplicating the context pointer via
the clone() operation, but only MPTCP and SMC implement such op.

Other ULPs may end-up with a double-free at socket disposal time.

We can't simply clear the ULP data at clone time, as TLS replaces the
socket ops with custom ones assuming a valid TLS ULP context is
available.

Instead completely prevent clone-less ULP sockets from entering the
LISTEN status.

Fixes: 734942cc ("tcp: ULP infrastructure")
Reported-by: slipper <slipper.alive@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop
that can run 500K times, so calls to qed_mcp_nvm_rd_cmd()
may block the current thread for over 5s.
We observed thread scheduling delays over 700ms in production,
with stacktraces pointing to this code as the culprit.

qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted.
It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd().
Add a "can sleep" parameter to qed_find_nvram_image() and
qed_nvram_read() so they can sleep during qed_mcp_trace_dump().
qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(),
called only by qed_mcp_trace_dump(), allow these functions to sleep.
I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep,
so keep b_can_sleep set to false when it calls these functions.

An example stacktrace from a custom warning we added to the kernel
showing a thread that has not scheduled despite long needing resched:
[ 2745.362925,17] ------------[ cut here ]------------
[ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0()
[ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99
[ 2745.362956,17] Modules linked in: ...
[ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P           O    4.4.182+ #202104120910+6d1da174272d.61x
[ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020
[ 2745.363346,17]  0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20
[ 2745.363358,17]  ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000
[ 2745.363369,17]  0000000000000063 0000000000000174 0000000000000074 0000000000000000
[ 2745.363379,17] Call Trace:
[ 2745.363382,17]  <IRQ>  [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf
[ 2745.363393,17]  [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0
[ 2745.363398,17]  [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50
[ 2745.363404,17]  [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0
[ 2745.363408,17]  [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0
[ 2745.363413,17]  [<ffffffff817c7ac9>] common_interrupt+0x89/0x89
[ 2745.363416,17]  <EOI>  [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50
[ 2745.363425,17]  [<ffffffff8132aa04>] __udelay+0x34/0x40
[ 2745.363457,17]  [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed]
[ 2745.363473,17]  [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed]
[ 2745.363490,17]  [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed]
[ 2745.363504,17]  [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed]
[ 2745.363520,17]  [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed]
[ 2745.363536,17]  [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed]
[ 2745.363551,17]  [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed]
[ 2745.363560,17]  [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede]
[ 2745.363566,17]  [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190
[ 2745.363570,17]  [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140
[ 2745.363575,17]  [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260
[ 2745.363580,17]  [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0
[ 2745.363585,17]  [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370
[ 2745.363589,17]  [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90
[ 2745.363594,17]  [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710
[ 2745.363599,17]  [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60
[ 2745.363603,17]  [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280
[ 2745.363608,17]  [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220
[ 2745.363612,17]  [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0
[ 2745.363616,17]  [<ffffffff811e3771>] SyS_ioctl+0x41/0x70
[ 2745.363619,17]  [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79
[ 2745.363622,17] ---[ end trace f6954aa440266421 ]---

Fixes: c965db44 ("qed: Add support for debug data collection")
Signed-off-by: Caleb Sander <csander@purestorage.com>
Acked-by: Alok Prasad <palok@marvell.com>
Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
bpf-next 2023-01-04

We've added 45 non-merge commits during the last 21 day(s) which contain
a total of 50 files changed, 1454 insertions(+), 375 deletions(-).

The main changes are:

1) Fixes, improvements and refactoring of parts of BPF verifier's
   state equivalence checks, from Andrii Nakryiko.

2) Fix a few corner cases in libbpf's BTF-to-C converter in particular
   around padding handling and enums, also from Andrii Nakryiko.

3) Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better
  support decap on GRE tunnel devices not operating in collect metadata,
  from Christian Ehrig.

4) Improve x86 JIT's codegen for PROBE_MEM runtime error checks,
   from Dave Marchevsky.

5) Remove the need for trace_printk_lock for bpf_trace_printk
   and bpf_trace_vprintk helpers, from Jiri Olsa.

6) Add proper documentation for BPF_MAP_TYPE_SOCK{MAP,HASH} maps,
   from Maryam Tahhan.

7) Improvements in libbpf's btf_parse_elf error handling, from Changbin Du.

8) Bigger batch of improvements to BPF tracing code samples,
   from Daniel T. Lee.

9) Add LoongArch support to libbpf's bpf_tracing helper header,
   from Hengqi Chen.

10) Fix a libbpf compiler warning in perf_event_open_probe on arm32,
    from Khem Raj.

11) Optimize bpf_local_storage_elem by removing 56 bytes of padding,
    from Martin KaFai Lau.

12) Use pkg-config to locate libelf for resolve_btfids build,
    from Shen Jiamin.

13) Various libbpf improvements around API documentation and errno
    handling, from Xin Liu.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
  libbpf: Return -ENODATA for missing btf section
  libbpf: Add LoongArch support to bpf_tracing.h
  libbpf: Restore errno after pr_warn.
  libbpf: Added the description of some API functions
  libbpf: Fix invalid return address register in s390
  samples/bpf: Use BPF_KSYSCALL macro in syscall tracing programs
  samples/bpf: Fix tracex2 by using BPF_KSYSCALL macro
  samples/bpf: Change _kern suffix to .bpf with syscall tracing program
  samples/bpf: Use vmlinux.h instead of implicit headers in syscall tracing program
  samples/bpf: Use kyscall instead of kprobe in syscall tracing program
  bpf: rename list_head -> graph_root in field info types
  libbpf: fix errno is overwritten after being closed.
  bpf: fix regs_exact() logic in regsafe() to remap IDs correctly
  bpf: perform byte-by-byte comparison only when necessary in regsafe()
  bpf: reject non-exact register type matches in regsafe()
  bpf: generalize MAYBE_NULL vs non-MAYBE_NULL rule
  bpf: reorganize struct bpf_reg_state fields
  bpf: teach refsafe() to take into account ID remapping
  bpf: Remove unused field initialization in bpf's ctl_table
  selftests/bpf: Add jit probe_mem corner case tests to s390x denylist
  ...
====================

Link: https://lore.kernel.org/r/20230105000926.31350-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
bpf 2023-01-04

We've added 5 non-merge commits during the last 8 day(s) which contain
a total of 5 files changed, 112 insertions(+), 18 deletions(-).

The main changes are:

1) Always use maximal size for copy_array in the verifier to fix
   KASAN tracking, from Kees.

2) Fix bpf task iterator walking through dead tasks, from Kui-Feng.

3) Make sure livepatch and bpf fexit can coexist, from Chuang.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Always use maximal size for copy_array()
  selftests/bpf: add a test for iter/task_vma for short-lived processes
  bpf: keep a reference to the mm, in case the task is dead.
  selftests/bpf: Temporarily disable part of btf_dump:var_data test.
  bpf: Fix panic due to wrong pageattr of im->image
====================

Link: https://lore.kernel.org/r/20230104215500.79435-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull virtio updates from Michael Tsirkin:
 "Mostly fixes all over the place, a couple of cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (32 commits)
  virtio_blk: Fix signedness bug in virtblk_prep_rq()
  vdpa_sim_net: should not drop the multicast/broadcast packet
  vdpasim: fix memory leak when freeing IOTLBs
  vdpa: conditionally fill max max queue pair for stats
  vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove
  vduse: Validate vq_num in vduse_validate_config()
  tools/virtio: remove smp_read_barrier_depends()
  tools/virtio: remove stray characters
  vhost_vdpa: fix the crash in unmap a large memory
  virtio: Implementing attribute show with sysfs_emit
  virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session()
  tools/virtio: Variable type completion
  vdpa_sim: fix vringh initialization in vdpasim_queue_ready()
  virtio_blk: use UINT_MAX instead of -1U
  vhost-vdpa: fix an iotlb memory leak
  vhost: fix range used in translate_desc()
  vringh: fix range used in iotlb_translate()
  vhost/vsock: Fix error handling in vhost_vsock_init()
  vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init()
  tools: Delete the unneeded semicolon after curly braces
  ...

Pull misc x86 fixes from Ingo Molnar:
 "Fix a double-free bug, a binutils warning, a header namespace clash
  and a bug in ib_prctl_set()"

* tag 'x86-urgent-2023-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/bugs: Flush IBP in ib_prctl_set()
  x86/insn: Avoid namespace clash by separating instruction decoder MMIO type from MMIO trace type
  x86/asm: Fix an assembler warning with current binutils
  x86/kexec: Fix double-free of elf header buffer

Pull f2fs fixes from Jaegeuk Kim:

 - fix a null pointer dereference in f2fs_issue_flush, which occurs by
   the combination of mount/remount options.

 - fix a bug in per-block age-based extent_cache newly introduced in
   6.2-rc1, which reported a wrong age information in extent_cache.

 - fix a kernel panic if extent_tree was not created, which was caught
   by a wrong BUG_ON

* tag 'f2fs-fix-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: let's avoid panic if extent_tree is not created
  f2fs: should use a temp extent_info for lookup
  f2fs: don't mix to use union values in extent_info
  f2fs: initialize extent_cache parameter
  f2fs: fix to avoid NULL pointer dereference in f2fs_issue_flush()

Pull nfsd fixes from Chuck Lever:

 - Fix a filecache UAF during NFSD shutdown

 - Avoid exposing automounted mounts on NFS re-exports

* tag 'nfsd-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: fix handling of readdir in v4root vs. mount upcall timeout
  nfsd: shut down the NFSv4 state objects before the filecache

We missed the window between the TIF flag update and the next reschedule.
Signed-off-by: Rodrigo Branco <bsdaemon@google.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-01-03 (igc)

Muhammad Husaini Zulkifli says:

Improvements to the Time-Sensitive Networking (TSN) Qbv Scheduling
capabilities were included in this patch series for I226 SKU.

An overview of each patch series is given below:

Patch 1: To enable basetime scheduling in the future, remove the existing
restriction for i226 stepping while maintain the restriction for i225.
Patch 2: Remove the restriction which require a controller reset when
setting the basetime register for new i226 steps and enable the second
GCL configuration.
Patch 3: Remove the power reset adapter during disabling the tsn config.
---
Patches remaining from initial PR:
https://lore.kernel.org/netdev/20221205212414.3197525-1-anthony.l.nguyen@intel.com/

after sending net patches:
https://lore.kernel.org/netdev/20221215230758.3595578-1-anthony.l.nguyen@intel.com/

Note: patch 3 is an additional patch from the initial PR.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>