- 06 Nov, 2018 17 commits
-
-
Brian Norris authored
ath10k_wcn3990_clk_info and ath10k_wcn3990_vreg_info are not WCN3990-specific structures. They hold generic data. So don't name them with wcn3990 specifics. Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Lior David authored
Switch from spin_lock to spin_lock_irqsave, because wmi_ev_lock is used inside interrupt handler. Signed-off-by:
Lior David <liord@codeaurora.org> Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
-
Ahmad Masri authored
After being associated with some EDMA rx traffic, upon "down" driver doesn't free all skbs in the rx ring. Modify wil_move_all_rx_buff_to_free_list to loop on active list of rx buffers, unmap the physical memory and free the skb. Signed-off-by:
Ahmad Masri <amasri@codeaurora.org> Signed-off-by:
-
Ahmad Masri authored
Rx buffers in EDMA mode are initialized to 4 bytes aligned size. Remove the unnecessary alignment code applied on rx buffer size. Signed-off-by:
-
Maya Erez authored
RGF_CAF_ICR register location has changed in Talyn-MB. Add RGF_CAF_ICR_TALYN_MB to support the new address. Signed-off-by:
-
Maya Erez authored
L2 RX status errors should not be treated as a bitmap and the actual error values should be checked. Print L2 errors as wil_err_ratelimited for easier debugging when such errors occurs. Signed-off-by:
-
Ahmad Masri authored
All wil6210 device memory access should be 4 bytes aligned. In io blob wil6210 did not force alignment for read function, this caused alignment fault on some platforms. Fixing that by accessing all 4 lower bytes and return to host the requested data. Signed-off-by:
-
Alexei Avshalom Lazar authored
Initialize unset variable, and verify that mid is valid. Signed-off-by:
Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by:
-
Ahmad Masri authored
wil6210 used to notify cfg80211_del_sta on every fw disconnect event. In disable_ap_sme mode the userspace manages the protocol SME and FW sends disconnect event only due to link loss. In disable_ap_sme mode, indicate CQM packet loss to let the host control the connection and disconnect the link if needed. Signed-off-by:
-
Ahmad Masri authored
Separate sending command to the fw from the event handling function to simplify the disconnect flow and track the from_event flag correctly. Signed-off-by:
-
Lior David authored
A successful call to wil_tx_ring takes skb reference so it will only be freed in wil_tx_complete. Consume the skb in wil_find_tx_bcast_2 to prevent memory leak. Signed-off-by:
-
Dedy Lansky authored
AP configuration is stored by the driver. Upon FW error, disconnect notification is sent to user space for any associated stations. AP is then internally restarted with the stored configuration. Signed-off-by:
Dedy Lansky <dlansky@codeaurora.org> Signed-off-by:
-
Dedy Lansky authored
When enlarging rx_ring_order module param, wil6210 fails to load because there are not enough Rx buffers. Fix this by enlarging number of Rx buffers at startup, if needed based on rx_ring_order. Signed-off-by:
-
Maya Erez authored
In Talyn-MB, the 11ad throughput is higher and performance drops may occur in the current RX configuration due to unavailability of Rx buffers. Increase the RX descriptor ring, RX status ring and number of RX buffers to stabilize the performance in high throughput. Signed-off-by:
-
Alexei Avshalom Lazar authored
With current reset flow, Talyn sometimes get stuck causing PCIe enumeration to fail. Fix this by removing some reset flow operations that are not relevant for Talyn. Setting bit 15 in RGF_HP_CTRL is WBE specific and is not in use for all wil6210 devices. For Sparrow, BIT_HPAL_PERST_FROM_PAD and BIT_CAR_PERST_RST were set as a WA an HW issue. Signed-off-by:
-
Hamad Kadmany authored
Setting the same fake hash to all skbs prevents distributing different flows to different CPU cores. Signed-off-by:
Hamad Kadmany <hkadmany@codeaurora.org> Signed-off-by:
-
Yangtao Li authored
Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
- 05 Nov, 2018 16 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056534 ("Missing break in switch") Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 201383 ("Missing break in switch") Signed-off-by:Steve deRosier <derosier@cal-sierra.com> Signed-off-by:
-
zhong jiang authored
new_flags is not used after setting its value. It is safe to remove the unused variable. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056532 ("Missing break in switch") Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056532 ("Missing break in switch") Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056532 ("Missing break in switch") Signed-off-by: -
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/ath/ath10k/wmi-tlv.c: In function 'ath10k_wmi_tlv_op_gen_config_pno_start': drivers/net/wireless/ath/ath10k/wmi-tlv.c:3455:6: warning: variable 'tlv_len' set but not used [-Wunused-but-set-variable] It never used since inroduction in commit ce834e28 ("ath10k: support NET_DETECT WoWLAN feature") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to some spelling mistakes in ath10k_err and ath10k_dbg messages: "capablity" -> "capability" "registed" -> "registered" Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dan Carpenter authored
I had a couple concerns with this code. First, we definitely need to set the error code if the kzalloc() fails. Secondly, I was worried that if we didn't set "arsta->tx_stats" to NULL after freeing it, then it looks to me like it might lead to a use after free. I can't test that, but it's harmless to set it to NULL so I did. Fixes: a904417f ("ath10k: add extended per sta tx statistics support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Rakesh Pillai authored
The host driver currently expects the channel info event to be received in pairs for all the channels, i.e. the first chan_info event for a particular channel will not have the COMPLETE flag set and the second chan_info event for the same channel will have the COMPLETE flag set. The HL2.0 firmware sends only one channel info event per channel which is scanned without the COMPLETE flag set. After sending the chan_info_event for all the channels, the HL2.0 firmware sends a chan_info_event with COMPLETE flag set to indicate the completion of the channel info event. The firmware does not indicate this behavior with any service bitmap and hence a new firmware feature flag is used to handle the modified parsing of the channel info events, in the host driver, for the firmware which sends single channel info event per scanned channel. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Co-developed-by:
Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by:
Rakesh Pillai <pillair@codeaurora.org> Signed-off-by:
-
Wei Yongjun authored
The return value from devm_memremap() is not checked correctly. The test is done against a wrong variable. This patch fix it. Fixes: ba94c753 ("ath10k: add QMI message handshake for wcn3990 client") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Anilkumar Kolli authored
ar->target_version is same for QCA99x0, QCA4019, QCA9888 and QCA9984, this ended up in assigning the wrong hw_mem_layouts. This patch adds additional hw_rev check to assign correct hw_mem_layouts. Tested on: QCA4019 firmware 10.4-3.2.1.1-00017 QCA9984 firmware 10.4-3.5.3-00057 Signed-off-by:
Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by:
-
Anilkumar Kolli authored
This patch adds firmware crash memory dump support for QCA4019. Tested on: QCA4019 firmware 10.4-3.2.1.1-00017 Signed-off-by:
-
Anilkumar Kolli authored
This patch adds the tx statistics pkts/bytes dump in rate table format. Dump format table is similar to http://mcsindex.com/ Tested on QCA9984/QCA4019/QCA988x Firmware: 10.4-3.5.3-00057 10.2.4-1.0-00037 command: cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan0/ stations/<MACADDR>/tx_stats Signed-off-by:
-
Surabhi Vishnoi authored
Whenever the WCN3990 firmware becomes unavailable, the host driver receives a FW down indication, post which all the direct hardware register access should be avoided, in order to prevent improper behavior in the host driver. Set the crash_flush flag when the host driver receives a FW_DOWN_IND via qmi, in order to stop the untimely hardware register access. Also handle the case, where we need to do core register only for the first FW_READY indication, which is when we initialize the host driver. All the subsequent FW_READY indication will be received in subsystem recovery case and we only need to do the restart work. The state of driver is maintained using flags to distinguish between first and subsequent FW_READY indication received. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by:
-
- 13 Oct, 2018 7 commits
-
-
Govind Singh authored
Add WCN3990 QMI client handshakes for Q6 integrated WLAN connectivity subsystem. This layer is responsible for communicating qmi control messages to wifi fw QMI service using QMI messaging protocol. Qualcomm MSM Interface(QMI) is a messaging format used to communicate between components running between remote processors with underlying transport layer based on integrated chipset(shared memory) or discrete chipset(PCI/USB/SDIO/UART). Signed-off-by:
Govind Singh <govinds@codeaurora.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by:
Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by:
-
Govind Singh authored
Add debug mask to control debug info of ath10k qmi messaging layer. Signed-off-by:
-
Govind Singh authored
Add WLAN related VMID's to support wlan driver to set up the remote's permissions call via TrustZone. Signed-off-by:
-
Govind Singh authored
Add device tree binding documentation details of msa memory region for ath10k qmi client for SDM845/APQ8098 SoC into "qcom,ath10k.txt". Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Rakesh Pillai authored
Add support to create the boardname for non-bmi targets like WCN3990, which uses qmi for bdf download. This boardname is used to parse the board data from board-2.bin. Signed-off-by:
-
Govind Singh authored
WLAN qmi server running in Q6 exposes host to target cold boot qmi handshakes. Add WLAN QMI service helpers for ath10k wcn3990 qmi client. Signed-off-by:
-
YueHaibing authored
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by:
-
