- 17 Oct, 2024 2 commits
-
-
Felix Fietkau authored
The loop responsible for allocating up to MTK_FQ_DMA_LENGTH buffers must only touch as many descriptors, otherwise it ends up corrupting unrelated memory. Fix the loop iteration count accordingly. Fixes: c57e5581 ("net: ethernet: mtk_eth_soc: handle dma buffer size soc specific") Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241015081755.31060-1-nbd@nbd.nameSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Daniel Borkmann authored
Andrew and Nikolay reported connectivity issues with Cilium's service load-balancing in case of vmxnet3. If a BPF program for native XDP adds an encapsulation header such as IPIP and transmits the packet out the same interface, then in case of vmxnet3 a corrupted packet is being sent and subsequently dropped on the path. vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp() through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address: page = virt_to_page(xdpf->data); tbi->dma_addr = page_pool_get_dma_addr(page) + VMXNET3_XDP_HEADROOM; dma_sync_single_for_device(&adapter->pdev->dev, tbi->dma_addr, buf_size, DMA_TO_DEVICE); The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP BPF program could have moved xdp->data. While the passed buf_size is correct (xdpf->len), the dma_addr needs to have a dynamic offset which can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data - xdp->data_hard_start. Fixes: 54f00cce ("vmxnet3: Add XDP support.") Reported-by: Andrew Sauber <andrew.sauber@isovalent.com> Reported-by: Nikolay Nikolaev <nikolay.nikolaev@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Nikolay Nikolaev <nikolay.nikolaev@isovalent.com> Acked-by: Anton Protopopov <aspsk@isovalent.com> Cc: William Tu <witu@nvidia.com> Cc: Ronak Doshi <ronak.doshi@broadcom.com> Link: https://patch.msgid.link/a0888656d7f09028f9984498cc698bb5364d89fc.1728931137.git.daniel@iogearbox.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
- 16 Oct, 2024 11 commits
-
-
Vladimir Oltean authored
Similar to the situation described for sja1105 in commit 1f9fc48f ("net: dsa: sja1105: fix reception from VLAN-unaware bridges"), the vsc73xx driver uses tag_8021q and doesn't need the ds->untag_bridge_pvid request. In fact, this option breaks packet reception. The ds->untag_bridge_pvid option strips VLANs from packets received on VLAN-unaware bridge ports. But those VLANs should already be stripped by tag_vsc73xx_8021q.c as part of vsc73xx_rcv() - they are not VLANs in VLAN-unaware mode, but DSA tags. Thus, dsa_software_vlan_untag() tries to untag a VLAN that doesn't exist, corrupting the packet. Fixes: 93e4649e ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges") Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patch.msgid.link/20241014153041.1110364-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Niklas Söderlund authored
Recent work moving the reporting of Rx software timestamps to the core [1] highlighted an issue where hardware time stamping was advertised for the platforms where it is not supported. Fix this by covering advertising support for hardware timestamps only if the hardware supports it. Due to the Tx implementation in RAVB software Tx timestamping is also only considered if the hardware supports hardware timestamps. This should be addressed in future, but this fix only reflects what the driver currently implements. 1. Commit 277901ee ("ravb: Remove setting of RX software timestamp") Fixes: 7e09a052 ("ravb: Exclude gPTP feature support for RZ/G2L") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com> Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://patch.msgid.link/20241014124343.3875285-1-niklas.soderlund+renesas@ragnatech.seSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jinjie Ruan authored
Commit a3c1e451 ("net: microchip: vcap: Fix use-after-free error in kunit test") fixed the use-after-free error, but introduced below memory leaks by removing necessary vcap_free_rule(), add it to fix it. unreferenced object 0xffffff80ca58b700 (size 192): comm "kunit_try_catch", pid 1215, jiffies 4294898264 hex dump (first 32 bytes): 00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d... 00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................ backtrace (crc 9c09c3fe): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4 [<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0400 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X..... 39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9............... backtrace (crc daf014e9): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0700 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X..... 3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../...... backtrace (crc 8d877792): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c [<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0900 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................ 7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }............... backtrace (crc 34181e56): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0980 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X............. 67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t..... backtrace (crc 275fd9be): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<000000001396a1a2>] test_add_def_fields+0xb0/0x100 [<000000006e7621f0>] vcap_val_rule+0xa98/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 ...... Cc: stable@vger.kernel.org Fixes: a3c1e451 ("net: microchip: vcap: Fix use-after-free error in kunit test") Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patch.msgid.link/20241014121922.1280583-1-ruanjinjie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Linus Walleij says: ==================== net: phy: mdio-bcm-unimac: Add BCM6846 variant As pointed out by Florian: https://lore.kernel.org/linux-devicetree/b542b2e8-115c-4234-a464-e73aa6bece5c@broadcom.com/ The BCM6846 has a few extra registers and cannot reuse the compatible string from other variants of the Unimac MDIO block: we need to be able to tell them apart. ==================== Link: https://patch.msgid.link/20241012-bcm6846-mdio-v1-0-c703ca83e962@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Linus Walleij authored
Add Unimac mdio compatible string for the special BCM6846 variant. This variant has a few extra registers compared to other versions. Suggested-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/linux-devicetree/b542b2e8-115c-4234-a464-e73aa6bece5c@broadcom.com/Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patch.msgid.link/20241012-bcm6846-mdio-v1-2-c703ca83e962@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Linus Walleij authored
The MDIO block in the BCM6846 is not identical to any of the previous versions, but has extended registers not present in the other variants. For this reason we need to use a new compatible especially for this SoC. Suggested-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/linux-devicetree/b542b2e8-115c-4234-a464-e73aa6bece5c@broadcom.com/Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20241012-bcm6846-mdio-v1-1-c703ca83e962@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Sitnicki authored
If: 1) the user requested USO, but 2) there is not enough payload for GSO to kick in, and 3) the egress device doesn't offer checksum offload, then we want to compute the L4 checksum in software early on. In the case when we are not taking the GSO path, but it has been requested, the software checksum fallback in skb_segment doesn't get a chance to compute the full checksum, if the egress device can't do it. As a result we end up sending UDP datagrams with only a partial checksum filled in, which the peer will discard. Fixes: 10154dbd ("udp: Allow GSO transmit from devices with no checksum offload") Reported-by: Ivan Babrou <ivan@cloudflare.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20241011-uso-swcsum-fixup-v2-1-6e1ddc199af9@cloudflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw one lockdep splat [1]. genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU. Instead of letting all callers guard genlmsg_multicast_allns() with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast(). This also means the @flags parameter is useless, we need to always use GFP_ATOMIC. [1] [10882.424136] ============================= [10882.424166] WARNING: suspicious RCU usage [10882.424309] 6.12.0-rc2-virtme #1156 Not tainted [10882.424400] ----------------------------- [10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!! [10882.424469] other info that might help us debug this: [10882.424500] rcu_scheduler_active = 2, debug_locks = 1 [10882.424744] 2 locks held by ip/15677: [10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219) [10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209) [10882.426465] stack backtrace: [10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme #1156 [10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [10882.427046] Call Trace: [10882.427131] <TASK> [10882.427244] dump_stack_lvl (lib/dump_stack.c:123) [10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) [10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7)) [10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink [10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink [10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115) [10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210) [10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink [10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201) [10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551) [10882.428069] genl_rcv (net/netlink/genetlink.c:1220) [10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357) [10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901) [10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1)) Fixes: 33f72e6f ("l2tp : multicast notification to the registered listeners") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Tom Parkin <tparkin@katalix.com> Cc: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20241011171217.3166614-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Peter Rashleigh authored
According to the Marvell datasheet the 88E6361 has two VTU pages (4k VIDs per page) so the max_vid should be 8191, not 4095. In the current implementation mv88e6xxx_vtu_walk() gives unexpected results because of this error. I verified that mv88e6xxx_vtu_walk() works correctly on the MV88E6361 with this patch in place. Fixes: 12899f29 ("net: dsa: mv88e6xxx: enable support for 88E6361 switch") Signed-off-by: Peter Rashleigh <peter@rashleigh.ca> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241014204342.5852-1-peter@rashleigh.caSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler(). """ We are seeing a use-after-free from a bpf prog attached to trace_tcp_retransmit_synack. The program passes the req->sk to the bpf_sk_storage_get_tracing kernel helper which does check for null before using it. """ The commit 83fccfc3 ("inet: fix potential deadlock in reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not to call del_timer_sync() from reqsk_timer_handler(), but it introduced a small race window. Before the timer is called, expire_timers() calls detach_timer(timer, true) to clear timer->entry.pprev and marks it as not pending. If reqsk_queue_unlink() checks timer_pending() just after expire_timers() calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will continue running and send multiple SYN+ACKs until it expires. The reported UAF could happen if req->sk is close()d earlier than the timer expiration, which is 63s by default. The scenario would be 1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(), but del_timer_sync() is missed 2. reqsk timer is executed and scheduled again 3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but reqsk timer still has another one, and inet_csk_accept() does not clear req->sk for non-TFO sockets 4. sk is close()d 5. reqsk timer is executed again, and BPF touches req->sk Let's not use timer_pending() by passing the caller context to __inet_csk_reqsk_queue_drop(). Note that reqsk timer is pinned, so the issue does not happen in most use cases. [1] [0] BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0 Use-after-free read at 0x00000000a891fb3a (in kfence-#1): bpf_sk_storage_get_tracing+0x2e/0x1b0 bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda bpf_trace_run2+0x4c/0xc0 tcp_rtx_synack+0xf9/0x100 reqsk_timer_handler+0xda/0x3d0 run_timer_softirq+0x292/0x8a0 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 intel_idle_irq+0x5a/0xa0 cpuidle_enter_state+0x94/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6 allocated by task 0 on cpu 9 at 260507.901592s: sk_prot_alloc+0x35/0x140 sk_clone_lock+0x1f/0x3f0 inet_csk_clone_lock+0x15/0x160 tcp_create_openreq_child+0x1f/0x410 tcp_v6_syn_recv_sock+0x1da/0x700 tcp_check_req+0x1fb/0x510 tcp_v6_rcv+0x98b/0x1420 ipv6_list_rcv+0x2258/0x26e0 napi_complete_done+0x5b1/0x2990 mlx5e_napi_poll+0x2ae/0x8d0 net_rx_action+0x13e/0x590 irq_exit_rcu+0xf5/0x320 common_interrupt+0x80/0x90 asm_common_interrupt+0x22/0x40 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb freed by task 0 on cpu 9 at 260507.927527s: rcu_core_si+0x4ff/0xf10 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb Fixes: 83fccfc3 ("inet: fix potential deadlock in reqsk_queue_unlink()") Reported-by: Martin KaFai Lau <martin.lau@kernel.org> Closes: https://lore.kernel.org/netdev/eb6684d0-ffd9-4bdc-9196-33f690c25824@linux.dev/ Link: https://lore.kernel.org/netdev/b55e2ca0-42f2-4b7c-b445-6ffd87ca74a0@linux.dev/ [1] Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20241014223312.4254-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wang Hai authored
The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb in case of mapping fails, add dev_kfree_skb() to fix it. Fixes: 490cb412 ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20241014145901.48940-1-wanghai38@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 15 Oct, 2024 18 commits
-
-
Wang Hai authored
The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb() to fix it. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://patch.msgid.link/20241014145115.44977-1-wanghai38@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wang Hai authored
The rtsn_start_xmit() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb_any() to fix it. Fixes: b0d3969d ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014144250.38802-1-wanghai38@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wang Hai authored
The axienet_start_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb_any() to fix it. Fixes: 71791dc8 ("net: axienet: Check for DMA mapping errors") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://patch.msgid.link/20241014143704.31938-1-wanghai38@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: prevent MPC handshake on port-based signal endpoints MPTCP connection requests toward a listening socket created by the in-kernel PM for a port based signal endpoint will never be accepted, they need to be explicitly rejected. - Patch 1: Explicitly reject such requests. A fix for >= v5.12. - Patch 2: Cover this case in the MPTCP selftests to avoid regressions. Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> v1: https://lore.kernel.org/20240908180620.822579-1-xiyou.wangcong@gmail.com Link: https://lore.kernel.org/a5289a0d-2557-40b8-9575-6f1a0bbf06e4@redhat.com ==================== Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-0-7faea8e6b6ae@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Explicitly verify that MPC connection attempts towards a port-based signal endpoint fail with a reset. Note that this new test is a bit different from the other ones, not using 'run_tests'. It is then needed to add the capture capability, and the picking the right port which have been extracted into three new helpers. The info about the capture can also be printed from a single point, which simplifies the exit paths in do_transfer(). The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 1729cf18 ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-2-7faea8e6b6ae@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Syzkaller reported a lockdep splat: ============================================ WARNING: possible recursive locking detected 6.11.0-rc6-syzkaller-00019-g67784a74 #0 Not tainted -------------------------------------------- syz-executor364/5113 is trying to acquire lock: ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 but task is already holding lock: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-slock-AF_INET); lock(k-slock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by syz-executor364/5113: #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806 #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727 #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470 #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228 #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline] #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104 #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232 #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 stack backtrace: CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_deadlock kernel/locking/lockdep.c:3061 [inline] validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855 __lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279 subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874 tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853 tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235 ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline] tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x214/0x350 net/core/sock.c:3004 release_sock+0x61/0x1f0 net/core/sock.c:3558 mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f04fb13a6b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9 RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240 R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300 </TASK> As noted by Cong Wang, the splat is false positive, but the code path leading to the report is an unexpected one: a client is attempting an MPC handshake towards the in-kernel listener created by the in-kernel PM for a port based signal endpoint. Such connection will be never accepted; many of them can make the listener queue full and preventing the creation of MPJ subflow via such listener - its intended role. Explicitly detect this scenario at initial-syn time and drop the incoming MPC request. Fixes: 1729cf18 ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Reported-by: syzbot+f4aacdfef2c6a6529c3e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e Cc: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-1-7faea8e6b6ae@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Li RongQing authored
pnetid of pi (not newly allocated pe) should be compared Fixes: e888a2e8 ("net/smc: introduce list of pnetids for Ethernet devices") Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com> Link: https://patch.msgid.link/20241014115321.33234-1-lirongqing@baidu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Oleksij Rempel authored
A boot delay was introduced by commit 79540d13 ("net: macb: Fix handling of fixed-link node"). This delay was caused by the call to `mdiobus_register()` in cases where a fixed-link PHY was present. The MDIO bus registration triggered unnecessary PHY address scans, leading to a 20-second delay due to attempts to detect Clause 45 (C45) compatible PHYs, despite no MDIO bus being attached. The commit 79540d13 ("net: macb: Fix handling of fixed-link node") was originally introduced to fix a regression caused by commit 7897b071 ("net: macb: convert to phylink"), which caused the driver to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings like: mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0 ... mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31 This patch reworks the logic to avoid registering and allocation of the MDIO bus when: - The device tree contains a fixed-link node. - There is no "mdio" child node in the device tree. If a child node named "mdio" exists, the MDIO bus will be registered to support PHYs attached to the MACB's MDIO bus. Otherwise, with only a fixed-link, the MDIO bus is skipped. Tested on a sama5d35 based system with a ksz8863 switch attached to macb0. Fixes: 79540d13 ("net: macb: Fix handling of fixed-link node") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241013052916.3115142-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wang Hai authored
The greth_start_xmit_gbit() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it. Fixes: d4c41139 ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/20241012110434.49265-1-wanghai38@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
I am still seeing many syzbot reports hinting that syzbot might fool nsim_dev_trap_report_work() with hundreds of ports [1] Lets use cond_resched(), and system_unbound_wq instead of implicit system_wq. [1] INFO: task syz-executor:20633 blocked for more than 143 seconds. Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor state:D stack:25856 pid:20633 tgid:20633 ppid:1 flags:0x00004006 ... NMI backtrace for cpu 1 CPU: 1 UID: 0 PID: 16760 Comm: kworker/1:0 Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events nsim_dev_trap_report_work RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:210 Code: 89 fb e8 23 00 00 00 48 8b 3d 04 fb 9c 0c 48 89 de 5b e9 c3 c7 5d 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0c 25 c0 d7 03 00 65 8b 15 60 f0 RSP: 0018:ffffc90000a187e8 EFLAGS: 00000246 RAX: 0000000000000100 RBX: ffffc90000a188e0 RCX: ffff888027d3bc00 RDX: ffff888027d3bc00 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88804a2e6000 R08: ffffffff8a4bc495 R09: ffffffff89da3577 R10: 0000000000000004 R11: ffffffff8a4bc2b0 R12: dffffc0000000000 R13: ffff88806573b503 R14: dffffc0000000000 R15: ffff8880663cca00 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc90a747f98 CR3: 000000000e734000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 000000000000002b DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 spin_unlock_bh include/linux/spinlock.h:396 [inline] nsim_dev_trap_report drivers/net/netdevsim/dev.c:820 [inline] nsim_dev_trap_report_work+0x75d/0xaa0 drivers/net/netdevsim/dev.c:850 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Fixes: ba5e1272 ("netdevsim: avoid potential loop in nsim_dev_trap_report_work()") Reported-by: syzbot+d383dc9579a76f56c251@syzkaller.appspotmail.com Reported-by: syzbot+c596faae21a68bf7afd0@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20241012094230.3893510-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Sabrina Dubroca authored
On RX, we shouldn't be incrementing the stats for an arbitrary SA in case the actual SA hasn't been set up. Those counters are intended to track packets for their respective AN when the SA isn't currently configured. Due to the way MACsec is implemented, we don't keep counters unless the SA is configured, so we can't track those packets, and those counters will remain at 0. The RXSC's stats keeps track of those packets without telling us which AN they belonged to. We could add counters for non-existent SAs, and then find a way to integrate them in the dump to userspace, but I don't think it's worth the effort. Fixes: 91ec9bd5 ("macsec: Fix traffic counters/statistics") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/f5ac92aaa5b89343232615f4c03f9f95042c6aa0.1728657709.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
The left shift int 32 bit integer constants 1 is evaluated using 32 bit arithmetic and then assigned to a 64 bit unsigned integer. In the case where the shift is 32 or more this can lead to an overflow. Avoid this by shifting using the BIT_ULL macro instead. Fixes: 019aba04 ("octeontx2-af: Modify SMQ flush sequence to drop packets") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/20241010154519.768785-1-colin.i.king@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paritosh Dixit authored
The Tegra MGBE driver sometimes fails to initialize, reporting the following error, and as a result, it is unable to acquire an IP address with DHCP: tegra-mgbe 6800000.ethernet: timeout waiting for link to become ready As per the recommendation from the Tegra hardware design team, fix this issue by: - clearing the PHY_RDY bit before setting the CDR_RESET bit and then setting PHY_RDY bit before clearing CDR_RESET bit. This ensures valid data is present at UPHY RX inputs before starting the CDR lock. - adding the required delays when bringing up the UPHY lane. Note we need to use delays here because there is no alternative, such as polling, for these cases. Using the usleep_range() instead of ndelay() as sleeping is preferred over busy wait loop. Without this change we would see link failures on boot sometimes as often as 1 in 5 boots. With this fix we have not observed any failures in over 1000 boots. Fixes: d8ca1137 ("net: stmmac: tegra: Add MGBE support") Signed-off-by: Paritosh Dixit <paritoshd@nvidia.com> Link: https://patch.msgid.link/20241010142908.602712-1-paritoshd@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Oliver Neukum authored
The same bug as in the disconnect code path also exists in the case of a failure late during the probe process. The flag must also be set. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20241010131934.1499695-1-oneukum@suse.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Kai Shen authored
This patch adds missing percpu_ref_exit when releasing percpu refs. When releasing percpu refs, percpu_ref_exit should be called. Otherwise, memory leak happens. Fixes: 79a22238 ("net/smc: Use percpu ref for wr tx reference") Signed-off-by: Kai Shen <KaiShen@linux.alibaba.com> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://patch.msgid.link/20241010115624.7769-1-KaiShen@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jinjie Ruan says: ==================== posix-clock: Fix missing timespec64 check for PTP clock Check timespec64 in pc_clock_settime() for PTP clock as the man manual of clock_settime() said. ==================== Link: https://patch.msgid.link/20241009072302.1754567-1-ruanjinjie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jinjie Ruan authored
Since timespec64_valid() has been checked in higher layer pc_clock_settime(), the duplicate check in lan743x_ptpci_settime64() can be removed. Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patch.msgid.link/20241009072302.1754567-3-ruanjinjie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jinjie Ruan authored
As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself. Cc: stable@vger.kernel.org Fixes: 0606f422 ("posix clocks: Introduce dynamic clocks") Acked-by: Richard Cochran <richardcochran@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patch.msgid.link/20241009072302.1754567-2-ruanjinjie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 14 Oct, 2024 1 commit
-
-
Jakub Kicinski authored
Andrew has been a pillar of the community for as long as I remember. Focusing on embedded networking, co-maintaining Ethernet PHYs and DSA code, but also actively reviewing MAC and integrated NIC drivers. Elevate Andrew to the status of co-maintainer of all netdev drivers. Acked-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/20241011193303.2461769-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 11 Oct, 2024 8 commits
-
-
Alessandro Zanni authored
This fix solves this error, when calling kselftest with targets "drivers/net": File "tools/testing/selftests/net/lib/py/nsim.py", line 64, in __init__ if e.errno == errno.ENOSPC: NameError: name 'errno' is not defined The error was found by running tests manually with the command: make kselftest TARGETS="drivers/net" The module errno makes available standard error system symbols. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com> Link: https://patch.msgid.link/20241010183034.24739-1-alessandro.zanni87@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Alessandro Zanni authored
This fix solves this error, when calling kselftest with targets "net/rds": The error was found by running tests manually with the command: make kselftest TARGETS="net/rds" The patch also specifies to import ip() function from the utils module. Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Link: https://patch.msgid.link/20241010194421.48198-1-alessandro.zanni87@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wei Fang authored
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled. The detailed warnings are shown as follows. include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes] 62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs) | ^ include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit 62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs) | ^ | static 8 warnings generated. Fixes: 6517798d ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Wei Fang says: ==================== net: enetc: fix some issues of XDP We found some bugs when testing the XDP function of enetc driver, and these bugs are easy to reproduce. This is not only causes XDP to not work, but also the network cannot be restored after exiting the XDP program. So the patch set is mainly to fix these bugs. For details, please see the commit message of each patch. v1: https://lore.kernel.org/bpf/20240919084104.661180-1-wei.fang@nxp.com/ v2: https://lore.kernel.org/netdev/20241008224806.2onzkt3gbslw5jxb@skbuf/ v3: https://lore.kernel.org/imx/20241009090327.146461-1-wei.fang@nxp.com/ ==================== Link: https://patch.msgid.link/20241010092056.298128-1-wei.fang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wei Fang authored
When running "xdp-bench tx eno0" to test the XDP_TX feature of ENETC on LS1028A, it was found that if the command was re-run multiple times, Rx could not receive the frames, and the result of xdp-bench showed that the rx rate was 0. root@ls1028ardb:~# ./xdp-bench tx eno0 Hairpinning (XDP_TX) packets on eno0 (ifindex 3; driver fsl_enetc) Summary 2046 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s By observing the Rx PIR and CIR registers, CIR is always 0x7FF and PIR is always 0x7FE, which means that the Rx ring is full and can no longer accommodate other Rx frames. Therefore, the problem is caused by the Rx BD ring not being cleaned up. Further analysis of the code revealed that the Rx BD ring will only be cleaned if the "cleaned_cnt > xdp_tx_in_flight" condition is met. Therefore, some debug logs were added to the driver and the current values of cleaned_cnt and xdp_tx_in_flight were printed when the Rx BD ring was full. The logs are as follows. [ 178.762419] [XDP TX] >> cleaned_cnt:1728, xdp_tx_in_flight:2140 [ 178.771387] [XDP TX] >> cleaned_cnt:1941, xdp_tx_in_flight:2110 [ 178.776058] [XDP TX] >> cleaned_cnt:1792, xdp_tx_in_flight:2110 From the results, the max value of xdp_tx_in_flight has reached 2140. However, the size of the Rx BD ring is only 2048. So xdp_tx_in_flight did not drop to 0 after enetc_stop() is called and the driver does not clear it. The root cause is that NAPI is disabled too aggressively, without having waited for the pending XDP_TX frames to be transmitted, and their buffers recycled, so that xdp_tx_in_flight cannot naturally drop to 0. Later, enetc_free_tx_ring() does free those stale, unsent XDP_TX packets, but it is not coded up to also reset xdp_tx_in_flight, hence the manifestation of the bug. One option would be to cover this extra condition in enetc_free_tx_ring(), but now that the ENETC_TX_DOWN exists, we have created a window at the beginning of enetc_stop() where NAPI can still be scheduled, but any concurrent enqueue will be blocked. Therefore, enetc_wait_bdrs() and enetc_disable_tx_bdrs() can be called with NAPI still scheduled, and it is guaranteed that this will not wait indefinitely, but instead give us an indication that the pending TX frames have orderly dropped to zero. Only then should we call napi_disable(). This way, enetc_free_tx_ring() becomes entirely redundant and can be dropped as part of subsequent cleanup. The change also refactors enetc_start() so that it looks like the mirror opposite procedure of enetc_stop(). Fixes: ff58fda0 ("net: enetc: prioritize ability to go down over packet processing") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-5-wei.fang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wei Fang authored
The Tx BD rings are disabled first in enetc_stop() and the driver waits for them to become empty. This operation is not safe while the ring is actively transmitting frames, and will cause the ring to not be empty and hardware exception. As described in the NETC block guide, software should only disable an active Tx ring after all pending ring entries have been consumed (i.e. when PI = CI). Disabling a transmit ring that is actively processing BDs risks a HW-SW race hazard whereby a hardware resource becomes assigned to work on one or more ring entries only to have those entries be removed due to the ring becoming disabled. When testing XDP_REDIRECT feautre, although all frames were blocked from being put into Tx rings during ring reconfiguration, the similar warning log was still encountered: fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear The reason is that when there are still unsent frames in the Tx ring, disabling the Tx ring causes the remaining frames to be unable to be sent out. And the Tx ring cannot be restored, which means that even if the xdp program is uninstalled, the Tx frames cannot be sent out anymore. Therefore, correct the operation order in enect_start() and enect_stop(). Fixes: ff58fda0 ("net: enetc: prioritize ability to go down over packet processing") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-4-wei.fang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wei Fang authored
When testing the XDP_REDIRECT function on the LS1028A platform, we found a very reproducible issue that the Tx frames can no longer be sent out even if XDP_REDIRECT is turned off. Specifically, if there is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on, the console may display some warnings like "timeout for tx ring #6 clear", and all redirected frames will be dropped, the detailed log is as follows. root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2 Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc) [203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear [204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear [204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg By analyzing the XDP_REDIRECT implementation of enetc driver, the driver will reconfigure Tx and Rx BD rings when a bpf program is installed or uninstalled, but there is no mechanisms to block the redirected frames when enetc driver reconfigures rings. Similarly, XDP_TX verdicts on received frames can also lead to frames being enqueued in the Tx rings. Because XDP ignores the state set by the netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to suppress transmission of XDP frames. Fixes: c33bfaf9 ("net: enetc: set up XDP program under enetc_reconfigure()") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-3-wei.fang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wei Fang authored
The xdp_drops statistic indicates the number of XDP frames dropped in the Rx direction. However, enetc_xdp_drop() is also used in XDP_TX and XDP_REDIRECT actions. If frame loss occurs in these two actions, the frames loss count should not be included in xdp_drops, because there are already xdp_tx_drops and xdp_redirect_failures to count the frame loss of these two actions, so it's better to remove xdp_drops statistic from enetc_xdp_drop() and increase xdp_drops in XDP_DROP action. Fixes: 7ed2bc80 ("net: enetc: add support for XDP_TX") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-2-wei.fang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-