The BCM4349B1, aka CYW/BCM89359, is a WiFi+BT chip and its Bluetooth
portion can be controlled over serial.
Extend the binding with its DT compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When HCI_USERCHANNEL is used, unregister the suspend notifier when
binding and register when releasing. The userchannel socket should be
left alone after open is completed.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When a userchannel socket is released, we should check whether the hdev
is already unregistered before sending out an IndexAdded.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The HCI command, event, and data packet processing workqueue is drained
to avoid deadlock in commit
76727c02 ("Bluetooth: Call drain_workqueue() before resetting state").

There is another delayed work, which will queue command to this drained
workqueue. Which results in the following error report:

Bluetooth: hci2: command 0x040f tx timeout
WARNING: CPU: 1 PID: 18374 at kernel/workqueue.c:1438 __queue_work+0xdad/0x1140
Workqueue: events hci_cmd_timeout
RIP: 0010:__queue_work+0xdad/0x1140
RSP: 0000:ffffc90002cffc60 EFLAGS: 00010093
RAX: 0000000000000000 RBX: ffff8880b9d3ec00 RCX: 0000000000000000
RDX: ffff888024ba0000 RSI: ffffffff814e048d RDI: ffff8880b9d3ec08
RBP: 0000000000000008 R08: 0000000000000000 R09: 00000000b9d39700
R10: ffffffff814f73c6 R11: 0000000000000000 R12: ffff88807cce4c60
R13: 0000000000000000 R14: ffff8880796d8800 R15: ffff8880796d8800
FS:  0000000000000000(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000c0174b4000 CR3: 000000007cae9000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 ? queue_work_on+0xcb/0x110
 ? lockdep_hardirqs_off+0x90/0xd0
 queue_work_on+0xee/0x110
 process_one_work+0x996/0x1610
 ? pwq_dec_nr_in_flight+0x2a0/0x2a0
 ? rwlock_bug.part.0+0x90/0x90
 ? _raw_spin_lock_irq+0x41/0x50
 worker_thread+0x665/0x1080
 ? process_one_work+0x1610/0x1610
 kthread+0x2e9/0x3a0
 ? kthread_complete_and_exit+0x40/0x40
 ret_from_fork+0x1f/0x30
 </TASK>

To fix this, we can add a new HCI_DRAIN_WQ flag, and don't queue the
timeout workqueue while command workqueue is draining.

Fixes: 76727c02 ("Bluetooth: Call drain_workqueue() before resetting state")
Reported-by: syzbot+63bed493aebbf6872647@syzkaller.appspotmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.

Fixes: 1ab1f239 ("Bluetooth: hci_intel: Add support for platform driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

If a hardware error occurs and the connections are flushed without a
disconnection_complete event being signaled, the temporary linkkeys are
not flushed.

This change ensures that any outstanding flushable linkkeys are flushed
when the connection are flushed from the hash table.

Additionally, this also makes use of test_and_clear_bit to avoid
multiple attempts to delete the link key that's already been flushed.
Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Use the presence of a DT property, "brcm,requires-autobaud-mode", to enable
startup in autobaud mode. If the property is present, the device is started
in autobaud mode by asserting RTS (BT_UART_CTS_N) prior to powering on the
device.

Also prevent the use of unsupported commands for devices started in
autobaud mode. Only a limited subset of HCI commands are supported in
autobaud mode.

Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller
device is using a non-standard baud rate in normal mode when first powered
on.
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Add property, "brcm,requires-autobaud-mode", to enable autobaud mode
selection.

Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller
device is using a non-standard baud rate when first powered on.
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This fixes the return value of qca_wakeup(), since
.wakeup work inversely with original .prevent_wake.

Fixes: 4539ca67 (Bluetooth: Rename driver .prevent_wake to .wakeup)
Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

It is 13d3:3568 for MediaTek MT7922 USB Bluetooth chip.

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3568 Rev=01.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=...
C:  #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can.

  Still no major regressions, most of the changes are still due to data
  races fixes, plus the usual bunch of drivers fixes.

  Previous releases - regressions:

   - tcp/udp: make early_demux back namespacified.

   - dsa: fix issues with vlan_filtering_is_global

  Previous releases - always broken:

   - ip: fix data-races around ipv4_net_table (round 2, 3 & 4)

   - amt: fix validation and synchronization bugs

   - can: fix detection of mcp251863

   - eth: iavf: fix handling of dummy receive descriptors

   - eth: lan966x: fix issues with MAC table

   - eth: stmmac: dwmac-mediatek: fix clock issue

  Misc:

   - dsa: update documentation"

* tag 'net-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
  mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication
  net/sched: cls_api: Fix flow action initialization
  tcp: Fix data-races around sysctl_tcp_max_reordering.
  tcp: Fix a data-race around sysctl_tcp_abort_on_overflow.
  tcp: Fix a data-race around sysctl_tcp_rfc1337.
  tcp: Fix a data-race around sysctl_tcp_stdurg.
  tcp: Fix a data-race around sysctl_tcp_retrans_collapse.
  tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.
  tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts.
  tcp: Fix data-races around sysctl_tcp_recovery.
  tcp: Fix a data-race around sysctl_tcp_early_retrans.
  tcp: Fix data-races around sysctl knobs related to SYN option.
  udp: Fix a data-race around sysctl_udp_l3mdev_accept.
  ip: Fix data-races around sysctl_ip_prot_sock.
  ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.
  ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.
  ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh.
  can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()
  can: mcp251xfd: fix detection of mcp251863
  Documentation: fix udp_wmem_min in ip-sysctl.rst
  ...

Jann reported a race between munmap() and unmap_mapping_range(), where
unmap_mapping_range() will no-op once unmap_vmas() has unlinked the
VMA; however munmap() will not yet have invalidated the TLBs.

Therefore unmap_mapping_range() will complete while there are still
(stale) TLB entries for the specified range.

Mitigate this by force flushing TLBs for VM_PFNMAP ranges.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that architectures are no longer allowed to override
tlb_{start,end}_vma() re-arrange code so that there is only one
implementation for each of these functions.

This much simplifies trying to figure out what they actually do.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The previous patch removed the tlb_flush_end() implementation which
used tlb_flush_range(). This means:

 - csky did double invalidates, a range invalidate per vma and a full
   invalidate at the end

 - csky actually has range invalidates and as such the generic
   tlb_flush implementation is more efficient for it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Scattered across the archs are 3 basic forms of tlb_{start,end}_vma().
Provide two new MMU_GATHER_knobs to enumerate them and remove the per
arch tlb_{start,end}_vma() implementations.

 - MMU_GATHER_NO_FLUSH_CACHE indicates the arch has flush_cache_range()
   but does *NOT* want to call it for each VMA.

 - MMU_GATHER_MERGE_VMAS indicates the arch wants to merge the
   invalidate across multiple VMAs if possible.

With these it is possible to capture the three forms:

  1) empty stubs;
     select MMU_GATHER_NO_FLUSH_CACHE and MMU_GATHER_MERGE_VMAS

  2) start: flush_cache_range(), end: empty;
     select MMU_GATHER_MERGE_VMAS

  3) start: flush_cache_range(), end: flush_tlb_range();
     default

Obviously, if the architecture does not have flush_cache_range() then
it also doesn't need to select MMU_GATHER_NO_FLUSH_CACHE.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently the command 'lx-symbols' in gdb exits with the error`Function
"do_init_module" not defined in "kernel/module.c"`. This occurs because
the file kernel/module.c was moved to kernel/module/main.c.

Fix this breakage by changing the path to "kernel/module/main.c" in
LoadModuleBreakpoint.
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Fixes: cfc1d277 ("module: Move all into module/")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sedat Dilek noticed that I had an extraneous semicolon at the end of a
line in the previous patch.

It's harmless, but unintentional, and while compilers just treat it as
an extra empty statement, for all I know some other tooling might warn
about it. So clean it up before other people notice too ;)

Fixes: 353f7988 ("watchqueue: make sure to serialize 'wqueue->defunct' properly")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>

DisplayLink ethernet devices require NTB buffers larger then 32kb
in order to run with highest performance.

This patch is changing upper limit of the rx and tx buffers.
Those buffers are initialized with CDC_NCM_NTB_DEF_SIZE_RX and
CDC_NCM_NTB_DEF_SIZE_TX which is 16kb so by default no device is
affected by increased limit.

Rx and tx buffer is increased under two conditions:
 - Device need to advertise that it supports higher buffer size in
   dwNtbMaxInMaxSize and dwNtbMaxOutMaxSize.
 - cdc_ncm/rx_max and cdc_ncm/tx_max driver parameters must be adjusted
   with udev rule or ethtool.

Summary of testing and performance results:
Tests were performed on following devices:
 - DisplayLink DL-3xxx family device
 - DisplayLink DL-6xxx family device
 - ASUS USB-C2500 2.5G USB3 ethernet adapter
 - Plugable USB3 1G USB3 ethernet adapter
 - EDIMAX EU-4307 USB-C ethernet adapter
 - Dell DBQBCBC064 USB-C ethernet adapter

Performance measurements were done with:
 - iperf3 between two linux boxes
 - http://openspeedtest.com/ instance running on local test machine

Insights from tests results:
 - All except one from third party usb adapters were not affected by
   increased buffer size to their advertised dwNtbOutMaxSize and
   dwNtbInMaxSize.
   Devices were generally reaching 912-940Mbps both download and upload.

   Only EDIMAX adapter experienced decreased download size from
   929Mbps to 827Mbps with iper3, with openspeedtest decrease was from
   968Mbps to 886Mbps.

 - DisplayLink DL-3xxx family devices experienced performance increase
   with iperf3 download from 300Mbps to 870Mbps and
   upload from 782Mbps to 844Mbps.
   With openspeedtest download increased from 556Mbps to 873Mbps
   and upload from 727Mbps to 973Mbps

 - DiplayLink DL-6xxx family devices are not affected by
   increased buffer size.
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220720060518.541-2-lukasz.spintzyk@synaptics.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This improves performance and stability of
DL-3xxx/DL-5xxx/DL-6xxx device series.

Specifically prevents device from temporary network dropouts when
playing video from the web and network traffic going through is high.
Signed-off-by: Dominik Czerwik <dominik.czerwik@synaptics.com>
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Link: https://lore.kernel.org/r/20220720060518.541-1-lukasz.spintzyk@synaptics.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Alex Elder says:

====================
net: ipa: move configuration data files

This series moves the "ipa_data-vX.Y.c" files into a subdirectory.
The first patch adds a Makefile variable containing the list of
supported IPA versions, and uses it to simplify the way these files
are specified.
====================

Link: https://lore.kernel.org/r/20220719150827.295248-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Reduce the clutter in the main IPA source directory by creating a
new "data" subdirectory, and locating all of the configuration data
files in there.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create a variable in the Makefile listing the IPA versions supported
by the driver.  Use that to create the list of configuration data
object files used (rather than listing them all individually).

Add a SPDX license comment.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: small transaction updates

Version 2 of this series corrects a misspelling of "outstanding"
pointed out by the netdev test bots.  (For some reason I don't see
that when I run "checkpatch".)  I found and fixed a second instance
of that word being misspelled as well.

This series includes three changes to the transaction code.  The
first adds a new transaction list that represents a distinct state
that has not been maintained.  The second moves a field in the
transaction information structure, and reorders its initialization
a bit.  The third skips a function call when it is known not to be
necessary.

The last two are very small "leftover" patches.
====================

Link: https://lore.kernel.org/r/20220719181020.372697-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 8797972a ("net: ipa: remove command info pool"),
we don't allocate "command info" entries for command channel
transactions.  Fix a comment that seems to suggest we still do.
(Even before that commit, the comment was out of place.)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When the IPA driver has completed its initialization and setup
stages, it emits a brief message to the log.  Add a small message
that reports when it has been removed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In gsi_trans_free(), there's no point in ipa_gsi_trans_release() if
a transaction is unused.  No used TREs means no IPA layer resources
to clean up.  So only call ipa_gsi_trans_release() if at least one
TRE was used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The transaction map is really associated with the transaction pool;
move its definition earlier in the gsi_trans_info structure.

Rearrange initialization in gsi_channel_trans_init() so it
sets the tre_avail value first, then initializes the transaction
pool, and finally allocating the transaction map.

Update comments.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We currently put a transaction on the pending list when it has
been committed.  But until the channel's doorbell rings, these
transactions aren't actually "owned" by the hardware yet.

Add a new "committed" state (and list), to represent transactions
that have been committed but not yet sent to hardware.  Define
"pending" to mean committed transactions that have been sent
to hardware but have not yet completed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create a new attribute group meant to provide a single place that
defines endpoint IDs that might be needed by user space.  Not all
defined endpoints are presented, and only those that are defined
will be made visible.

The new attributes use "extended" device attributes to hold endpoint
IDs, which is a little more compact and efficient.  Reimplement the
existing modem endpoint ID attribute files using common code.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220719191639.373249-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch fixes a build error reported in the link. [0]

  unix_connect.c: In function ‘unix_connect_test’:
  unix_connect.c:115:55: error: expected identifier before ‘(’ token
   #define offsetof(type, member) ((size_t)&((type *)0)->(member))
                                                       ^
  unix_connect.c:128:12: note: in expansion of macro ‘offsetof’
    addrlen = offsetof(struct sockaddr_un, sun_path) + variant->len;
              ^~~~~~~~

We can fix this by removing () around member, but checkpatch will complain
about it, and the root cause of the build failure is that I followed the
warning and fixed this in the v2 -> v3 change of the blamed commit. [1]

  CHECK: Macro argument 'member' may be better as '(member)' to avoid precedence issues
  #33: FILE: tools/testing/selftests/net/af_unix/unix_connect.c:115:
  +#define offsetof(type, member) ((size_t)&((type *)0)->member)

To avoid this warning, let's use offsetof() defined in stddef.h instead.

[0]: https://lore.kernel.org/linux-mm/202207182205.FrkMeDZT-lkp@intel.com/
[1]: https://lore.kernel.org/netdev/20220702154818.66761-1-kuniyu@amazon.com/

Fixes: e95ab1d8 ("selftests: net: af_unix: Test connect() with different netns.")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220720005750.16600-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It's repeated with line 1793-1795, and there isn't any other
handling for it. So remove it.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Link: https://lore.kernel.org/r/20220719142424.4528-1-shenjian15@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next:

1) Simplify nf_ct_get_tuple(), from Jackie Liu.

2) Add format to request_module() call, from Bill Wendling.

3) Add /proc/net/stats/nf_flowtable to monitor in-flight pending
   hardware offload objects to be processed, from Vlad Buslov.

4) Missing rcu annotation and accessors in the netfilter tree,
   from Florian Westphal.

5) Merge h323 conntrack helper nat hooks into single object,
   also from Florian.

6) A batch of update to fix sparse warnings treewide,
   from Florian Westphal.

7) Move nft_cmp_fast_mask() where it used, from Florian.

8) Missing const in nf_nat_initialized(), from James Yonan.

9) Use bitmap API for Maglev IPVS scheduler, from Christophe Jaillet.

10) Use refcount_inc instead of _inc_not_zero in flowtable,
    from Florian Westphal.

11) Remove pr_debug in xt_TPROXY, from Nathan Cancellor.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: xt_TPROXY: remove pr_debug invocations
  netfilter: flowtable: prefer refcount_inc
  netfilter: ipvs: Use the bitmap API to allocate bitmaps
  netfilter: nf_nat: in nf_nat_initialized(), use const struct nf_conn *
  netfilter: nf_tables: move nft_cmp_fast_mask to where its used
  netfilter: nf_tables: use correct integer types
  netfilter: nf_tables: add and use BE register load-store helpers
  netfilter: nf_tables: use the correct get/put helpers
  netfilter: x_tables: use correct integer types
  netfilter: nfnetlink: add missing __be16 cast
  netfilter: nft_set_bitmap: Fix spelling mistake
  netfilter: h323: merge nat hook pointers into one
  netfilter: nf_conntrack: use rcu accessors where needed
  netfilter: nf_conntrack: add missing __rcu annotations
  netfilter: nf_flow_table: count pending offload workqueue tasks
  net/sched: act_ct: set 'net' pointer when creating new nf_flow_table
  netfilter: conntrack: use correct format characters
  netfilter: conntrack: use fallthrough to cleanup
====================

Link: https://lore.kernel.org/r/20220720230754.209053-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5-updates-2022-07-17

1) Add resiliency for lost completions for PTP TX port timestamp

2) Report Header-data split state via ethtool

3) Decouple HTB code from main regular TX code

* tag 'mlx5-updates-2022-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: CT: Remove warning of ignore_flow_level support for non PF
  net/mlx5e: Add resiliency for PTP TX port timestamp
  net/mlx5: Expose ts_cqe_metadata_size2wqe_counter
  net/mlx5e: HTB, move htb functions to a new file
  net/mlx5e: HTB, change functions name to follow convention
  net/mlx5e: HTB, remove priv from htb function calls
  net/mlx5e: HTB, hide and dynamically allocate mlx5e_htb structure
  net/mlx5e: HTB, move stats and max_sqs to priv
  net/mlx5e: HTB, move section comment to the right place
  net/mlx5e: HTB, move ids to selq_params struct
  net/mlx5e: HTB, reduce visibility of htb functions
  net/mlx5e: Fix mqprio_rl handling on devlink reload
  net/mlx5e: Report header-data split state through ethtool
====================

Link: https://lore.kernel.org/r/20220719203529.51151-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

pr_debug calls are no longer needed in this file.

Pablo suggested "a patch to remove these pr_debug calls". This patch has
some other beneficial collateral as it also silences multiple Clang
-Wformat warnings that were present in the pr_debug calls.

diff from v1 -> v2:
* converted if statement one-liner style
* x == NULL is now !x
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

With refcount_inc_not_zero, we'd also need a smp_rmb or similar,
followed by a test of the CONFIRMED bit.

However, the ct pointer is taken from skb->_nfct, its refcount must
not be 0 (else, we'd already have a use-after-free bug).

Use refcount_inc() instead to clarify the ct refcount is expected to
be at least 1.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.

It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

When the pipe is closed, we mark the associated watchqueue defunct by
calling watch_queue_clear().  However, while that is protected by the
watchqueue lock, new watchqueue entries aren't actually added under that
lock at all: they use the pipe->rd_wait.lock instead, and looking up
that pipe happens without any locking.

The watchqueue code uses the RCU read-side section to make sure that the
wqueue entry itself hasn't disappeared, but that does not protect the
pipe_info in any way.

So make sure to actually hold the wqueue lock when posting watch events,
properly serializing against the pipe being torn down.
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The lockdown LSM is primarily used in conjunction with UEFI Secure Boot.
This LSM may also be used on machines without UEFI.  It can also be
enabled when UEFI Secure Boot is disabled.  One of lockdown's features
is to prevent kexec from loading untrusted kernels.  Lockdown can be
enabled through a bootparam or after the kernel has booted through
securityfs.

If IMA appraisal is used with the "ima_appraise=log" boot param,
lockdown can be defeated with kexec on any machine when Secure Boot is
disabled or unavailable.  IMA prevents setting "ima_appraise=log" from
the boot param when Secure Boot is enabled, but this does not cover
cases where lockdown is used without Secure Boot.

To defeat lockdown, boot without Secure Boot and add ima_appraise=log to
the kernel command line; then:

  $ echo "integrity" > /sys/kernel/security/lockdown
  $ echo "appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig" > \
    /sys/kernel/security/ima/policy
  $ kexec -ls unsigned-kernel

Add a call to verify ima appraisal is set to "enforce" whenever lockdown
is enabled.  This fixes CVE-2022-21505.

Cc: stable@vger.kernel.org
Fixes: 29d3c1c8 ("kexec: Allow kexec_file() with appropriate IMA policy when locked down")
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: John Haxby <john.haxby@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'linux-can-fixes-for-5.19-20220720' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
this is a pull request of 2 patches for net/master.

The first patch is by me and fixes the detection of the mcp251863 in
the mcp251xfd driver.

The last patch is by Liang He and adds a missing of_node_put() in the
rcar_canfd driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>