Skip to content

L
linux
Switch branch/tag
  1. 15 Jul, 2020 3 commits
  3. 13 Jul, 2020 1 commit
  5. 08 Jul, 2020 3 commits
  7. 07 Jul, 2020 1 commit
  9. 06 Jul, 2020 4 commits
  11. 03 Jul, 2020 2 commits
  13. 02 Jul, 2020 13 commits
  15. 01 Jul, 2020 10 commits
    • Mark Brown's avatar
      Merge series "Introduce PMIC based USB type C detection" from Wesley Cheng <wcheng@codeaurora.org>: · d5ff5fb9
      Mark Brown authored 
      Changes in v4:
 - Modified qcom,pmic-typec binding to include the SS mux and the DRD remote
   endpoint nodes underneath port@1, which is assigned to the SSUSB path
   according to usb-connector
 - Added usb-connector reference to the typec dt-binding
 - Added tags to the usb type c and vbus nodes
 - Removed "qcom" tags from type c and vbus nodes
 - Modified Kconfig module name, and removed module alias from the typec driver

Changes in v3:
 - Fix driver reference to match driver name in Kconfig for
   qcom_usb_vbus-regulator.c
 - Utilize regulator bitmap helpers for enable, disable and is enabled calls in
   qcom_usb_vbus-regulator.c
 - Use of_get_regulator_init_data() to initialize regulator init data, and to
   set constraints in qcom_usb_vbus-regulator.c
 - Remove the need for a local device structure in the vbus regulator driver

Changes in v2:
 - Use devm_kzalloc() in qcom_pmic_typec_probe()
 - Add checks to make sure return value of typec_find_port_power_role() is
   valid
 - Added a VBUS output regulator driver, which will be used by the PMIC USB
   type c driver to enable/disable the source
 - Added logic to control vbus source from the PMIC type c driver when
   UFP/DFP is detected
 - Added dt-binding for this new regulator driver
 - Fixed Kconfig typec notation to match others
 - Leave type C block disabled until enabled by a platform DTS

Add the required drivers for implementing type C orientation and role
detection using the Qualcomm PMIC.  Currently, PMICs such as the PM8150B
have an integrated type C block, which can be utilized for this.  This
series adds the dt-binding, PMIC type C driver, and DTS nodes.

The PMIC type C driver will register itself as a type C port w/ a
registered type C switch for orientation, and will fetch a USB role switch
handle for the role notifications.  It will also have the ability to enable
the VBUS output to any connected devices based on if the device is behaving
as a UFP or DFP.

Wesley Cheng (6):
  usb: typec: Add QCOM PMIC typec detection driver
  dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding
  arm64: boot: dts: qcom: pm8150b: Add node for USB type C block
  regulator: Add support for QCOM PMIC VBUS booster
  dt-bindings: regulator: Add dt-binding for QCOM PMIC VBUS output
    regulator
  arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster

 .../regulator/qcom,usb-vbus-regulator.yaml    |  41 +++
 .../bindings/usb/qcom,pmic-typec.yaml         | 113 +++++++
 arch/arm64/boot/dts/qcom/pm8150b.dtsi         |  13 +
 arch/arm64/boot/dts/qcom/sm8150-mtp.dts       |   4 +
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/qcom_usb_vbus-regulator.c   |  97 ++++++
 drivers/usb/typec/Kconfig                     |  12 +
 drivers/usb/typec/Makefile                    |   1 +
 drivers/usb/typec/qcom-pmic-typec.c           | 275 ++++++++++++++++++
 10 files changed, 567 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
 create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
 create mode 100644 drivers/regulator/qcom_usb_vbus-regulator.c
 create mode 100644 drivers/usb/typec/qcom-pmic-typec.c

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
      d5ff5fb9
    • Mark Brown's avatar
      Merge series "regulator/qcom: Constify static structs" from Rikard Falkeborn... · d69323ee
      Mark Brown authored 
      Merge series "regulator/qcom: Constify static structs" from Rikard Falkeborn <rikard.falkeborn@gmail.com>:

Constify some static structs to allow the compiler to put them in
read-only memory.

Rikard Falkeborn (2):
  regulator: qcom_rpm: Constify struct regulator_ops
  regulator: qcom_spmi: Constify struct regulator_ops

 drivers/regulator/qcom_rpm-regulator.c  |  6 +++---
 drivers/regulator/qcom_spmi-regulator.c | 24 ++++++++++++------------
 2 files changed, 15 insertions(+), 15 deletions(-)

--
2.27.0
      d69323ee
    • Mark Brown's avatar
      Merge series "Add frequency / voltage scaling support for IPQ6018 SoC" from... · e5abaf91
      Mark Brown authored 
      Merge series "Add frequency / voltage scaling support for IPQ6018 SoC" from Kathiravan T <kathirav@codeaurora.org>:

IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496
controls the APSS and SDCC voltage scaling respectively. Add support
for the same.

changes since V1:
	- Moved YAML conversion to the last as per Mark's comments

Kathiravan T (6):
  dt-bindings: soc: qcom: Add IPQ6018 compatible
  soc: qcom: smd-rpm: Add IPQ6018 compatible
  dt-bindings: regulator: add MP5496 regulator compatible
  regulator: qcom_smd: Add MP5496 regulators
  dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema
  dt-bindings: regulator: convert QCOM SMD-RPM regulator document to
    YAML schema

 .../bindings/regulator/qcom,smd-rpm-regulator.txt  | 320 ---------------------
 .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt  |  62 ----
 .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml |  92 ++++++
 drivers/regulator/qcom_smd-regulator.c             |  34 +++
 drivers/soc/qcom/smd-rpm.c                         |   1 +
 6 files changed, 233 insertions(+), 382 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
 delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
      e5abaf91
    • Luca Ceresoli's avatar
      regulator: lp87565: enable voltage regardless of ENx pin · 81fdcef3
      Luca Ceresoli authored 
      This driver enables outputs by setting bit EN_BUCKn in the BUCKn_CTRL1
register. However, if bit EN_PIN_CTRLn in the same register is set, the
output is actually enabled only if EN_BUCKn is set AND an enable pin is
active. Since the driver does not touch EN_PIN_CTRLn, the choice is left to
the hardware, which in turn gets this bit from OTP memory, and in absence
of OTP data it uses a default value that is documented in the datasheet for
LP8752x, but not for LP8756x.

Thus the driver doesn't really "know" whether it is actually enabling the
output or not.

In order to make sure activation is always driver-controlled, just clear
the EN_PIN_CTRLn bit. Now all activation solely depend on the EN_BUCKn bit.
Signed-off-by: default avatarLuca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20200622204329.11147-2-luca@lucaceresoli.netSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      81fdcef3
    • Kathiravan T's avatar
      regulator: add MP5496 regulator compatible · 93e39d09
      Kathiravan T authored 
      IPQ6018 uses the PMIC MP5496. Add the binding for the same.
Signed-off-by: default avatarKathiravan T <kathirav@codeaurora.org>
Link: https://lore.kernel.org/r/1592889472-6843-4-git-send-email-kathirav@codeaurora.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      93e39d09
    • Kathiravan T's avatar
      regulator: qcom_smd: Add MP5496 regulators · 47894c85
      Kathiravan T authored 
      IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator controls the
APSS and SDCC voltage scaling respectively. Add support for the same.
Signed-off-by: default avatarKathiravan T <kathirav@codeaurora.org>
Link: https://lore.kernel.org/r/1592889472-6843-5-git-send-email-kathirav@codeaurora.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      47894c85
    • Rikard Falkeborn's avatar
      regulator: qcom_spmi: Constify struct regulator_ops · 3b619e3e
      Rikard Falkeborn authored 
      These are never modified, so make them const to allow the compiler to
put them in read-only memory.

Before:
   text    data     bss     dec     hex filename
  20362    2592     152   23106    5a42 drivers/regulator/qcom_spmi-regulator.o

After:
   text    data     bss     dec     hex filename
  21814    1140     152   23106    5a42 drivers/regulator/qcom_spmi-regulator.o
Signed-off-by: default avatarRikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200629194632.8147-3-rikard.falkeborn@gmail.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      3b619e3e
    • Rikard Falkeborn's avatar
      regulator: qcom_rpm: Constify struct regulator_ops · 8d41df64
      Rikard Falkeborn authored 
      These are never modified, so make them const to allow the compiler to
put them in read-only memory.

Before:
   text    data     bss     dec     hex filename
  17485     500       8   17993    4649 drivers/regulator/qcom_rpm-regulator.o

After:
   text    data     bss     dec     hex filename
  17881     104       8   17993    4649 drivers/regulator/qcom_rpm-regulator.o
Signed-off-by: default avatarRikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200629194632.8147-2-rikard.falkeborn@gmail.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      8d41df64
    • Wesley Cheng's avatar
      regulator: Add dt-binding for QCOM PMIC VBUS output regulator · a824bab7
      Wesley Cheng authored 
      This describes how to enable the Qualcomm PMIC VBUS booster used for
providing power to connected USB peripherals when the USB role is host
mode.  The driver itself will register the vbus_usb regulator, so that
external drivers can utilize the enable/disable regulator APIs.
Signed-off-by: default avatarWesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20200626185516.18018-6-wcheng@codeaurora.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      a824bab7
    • Wesley Cheng's avatar
      regulator: Add support for QCOM PMIC VBUS booster · 4fe66d5a
      Wesley Cheng authored 
      Some Qualcomm PMICs have the capability to source the VBUS output to
connected peripherals.  This driver will register a regulator to the
regulator list to enable or disable this source by an external driver.
Signed-off-by: default avatarWesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20200626185516.18018-5-wcheng@codeaurora.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      4fe66d5a
  17. 26 Jun, 2020 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7