- 19 Jun, 2022 1 commit
-
-
Sebastian Andrzej Siewior authored
The call chain generic_handle_irq(irq_find_mapping(domain, x)); could be replaced with generic_handle_domain_irq(domain, x); which looks up the struct irq_desc for the interrupt and handles it with handle_irq_desc(). This is a slight optimisation given that the driver invokes only one function and the struct irq_desc is used directly instead being looked up via irq_to_desc(). Use generic_handle_domain_irq(). Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/YnuYoQIzJoFIyEJY@linutronix.deSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 18 Jun, 2022 15 commits
-
-
Luca Weiss authored
Contrary to what the naming might suggest, devm_regulator_get_optional returns -ENODEV in case the regulator is not found which will trigger probe error in this driver. Use devm_regulator_get instead which will return a dummy regulator that we can just use as if it was a proper regulator. Fixes: d3d6dba5 ("proximity: vl53l0x: Handle the VDD regulator") Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20220614112049.302278-1-luca.weiss@fairphone.comSigned-off-by:
-
Lukas Bulwahn authored
Maintainers of the directory Documentation/devicetree/bindings/iio are also the maintainers of the corresponding directory include/dt-bindings/iio. Add the file entry for include/dt-bindings/iio to the appropriate section in MAINTAINERS. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20220613115045.24326-1-lukas.bulwahn@gmail.comSigned-off-by:
-
Marek Vasut authored
Align the example node address and reg content to be 0x2a for both. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-iio@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20220615233411.90621-1-marex@denx.deSigned-off-by:
-
Xiang wangx authored
Delete the redundant word 'in'. Signed-off-by:
Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220616141522.2238-1-wangxiang@cdjrlc.comSigned-off-by:
-
Andy Shevchenko authored
Replace open coded str_enable_disable() in error message in stm32_dac_set_enable_state(). Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220616220023.9894-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused which is not what we want. Instead of making linker to drop a section, drop ACPI_PTR(). As a side effect this makes driver ACPI and OF clean. Signed-off-by:
-
Tetsuo Handa authored
Since cancel_delayed_work(&chip->poweroff_work) does not guarantee that tsl2563_poweroff_work() is not running, tsl2563_set_power(chip, 0) can be called from tsl2563_poweroff_work() after tsl2563_get_power(chip) and tsl2563_set_power(chip, 1) are called. Use _sync version in order to make sure that tsl2563_poweroff_work() is no longer running. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/041b6745-f784-ff3f-9836-3f4397d35d94@I-love.SAKURA.ne.jpSigned-off-by:
-
Tetsuo Handa authored
Commit 9e61d901 ("iio: light: tsl2563: Remove flush_scheduled_work") replaced cancel_delayed_work() + flush_scheduled_work() with cancel_delayed_work_sync() for only tsl2563_probe() side. Do the same thing for tsl2563_remove() side, which was added by commit 388be488 ("staging:iio: tsl2563 abi fixes and interrupt handling"). Signed-off-by:
-
Dmitry Rokosov authored
As a part of patch series about wrong trigger register() and get() calls order in the some IIO drivers trigger initialization path: https://lore.kernel.org/all/20220524181150.9240-1-ddrokosov@sberdevices.ru/ runtime WARN_ONCE() is added to alarm IIO driver authors who make such a mistake. When an IIO driver allocates a new IIO trigger, it should register it before calling the get() operation. In other words, each IIO driver must abide by IIO trigger alloc()/register()/get() calls order. Signed-off-by:
Dmitry Rokosov <ddrokosov@sberdevices.ru> Link: https://lore.kernel.org/r/20220607183907.20017-1-ddrokosov@sberdevices.ruSigned-off-by:
-
Jonathan Cameron authored
Immutable branch used to allow changes to SPMI and MFD subsystems needed by this driver to be pulled into those trees as well if relevant.
-
Caleb Connolly authored
The Round Robin ADC is responsible for reading data about the rate of charge from the USB or DC input ports, it can also read the battery ID (resistence), skin temperature and the die temperature of the pmic. It is found on the PMI8998 and PM660 Qualcomm PMICs. Signed-off-by:
Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20220429220904.137297-6-caleb.connolly@linaro.orgSigned-off-by:
-
Caleb Connolly authored
Add dt-binding docs for the Qualcomm SPMI RRADC found in PMICs like PMI8998 and PMI8994 Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220429220904.137297-5-caleb.connolly@linaro.orgSigned-off-by:
-
Caleb Connolly authored
The PMI8998 and PM660 expose the fab_id, this is needed by drivers like the RRADC to calibrate ADC values. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by:
Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220429220904.137297-4-caleb.connolly@linaro.orgSigned-off-by:
-
Caleb Connolly authored
Some PMIC functions such as the RRADC need to be aware of the PMIC chip revision information to implement errata or otherwise adjust behaviour, export the PMIC information to enable this. This is specifically required to enable the RRADC to adjust coefficients based on which chip fab the PMIC was produced in, this can vary per unique device and therefore has to be read at runtime. Signed-off-by:
-
Caleb Connolly authored
The helper function spmi_device_from_of() takes a device node and returns the SPMI device associated with it. This is like of_find_device_by_node but for SPMI devices. Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220429220904.137297-2-caleb.connolly@linaro.orgSigned-off-by:
-
- 15 Jun, 2022 17 commits
-
-
Joe Simmons-Talbott authored
As reported by checkpatch.pl. Where possible use DEVICE_ATTR_RO(), DEVICE_ATTR_RW(), and __ATTR_RO(). Change function names to be <var>_show() for read and <var>_store() for write. Suggested-by:
Joe Perches <joe@perches.com> Suggested-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Joe Simmons-Talbott <joetalbott@gmail.com> Reviewed-by:
-
Andy Shevchenko authored
Simplify busy wait stages by using regmap_read_poll_timeout(). Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # GXM VIM2 Link: https://lore.kernel.org/r/20220603100004.70336-6-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
Use temporary variable for struct device to make code neater. Signed-off-by:
-
Andy Shevchenko authored
Replace open coded variants of devm_clk_get_optional(). Signed-off-by:
-
Andy Shevchenko authored
It's fine to call dev_err_probe() in ->probe() when error code is known. Convert the driver to use dev_err_probe(). Signed-off-by:
-
Andy Shevchenko authored
Align messages to be printed with the physical device prefix as it's done everywhere else in this driver. Signed-off-by:
-
Andy Shevchenko authored
It feels wrong and actually inconsistent to attach managed resources to the IIO device object, which is child of the physical device object. The rest of the ->probe() calls do that against physical device. Resolve this by reassigning managed resources to the physical device object. Suggested-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Andy Shevchenko authored
Instead of a pair of u32 re-use generic struct u32_fract. No functional changes intended. Signed-off-by:
Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220530180910.2533-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Paul Cercueil authored
Instead of returning an error if the watermark value is too high, which the core will silently ignore anyway, limit the value to the hardware FIFO size; a lower-than-requested value is still better than using the default, which is usually 1. Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220117102512.31725-2-paul@crapouillou.netSigned-off-by:
-
Paul Cercueil authored
Instead of returning an error if the watermark value is too high, which the core will silently ignore anyway, limit the value to the hardware FIFO size; a lower-than-requested value is still better than using the default, which is usually 1. Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/20220117102512.31725-1-paul@crapouillou.netSigned-off-by:
-
Jonathan Cameron authored
Avoid unnecessary pollution of the global symbol namespace by moving library functions in to a specific namespace and import that into the drivers that make use of the functions. For more info: https://lwn.net/Articles/760045/Signed-off-by:
-
Jonathan Cameron authored
These new functions move the burden of removing unused code when CONFIG_PM_SLEEP is not defined onto the compiler rather than requiring the use of CONFIG_PM guards and similar. Signed-off-by:
-
Jonathan Cameron authored
Avoid unnecessary pollution of the global symbol namespace by moving library functions in to a specific namespace and import that into the drivers that make use of the functions. For more info: https://lwn.net/Articles/760045/Signed-off-by:
-
Jonathan Cameron authored
If CONFIG_PM_SLEEP is not defined using EXPORT_SIMPLE_DEV_PM_OPS() in conjunction with pm_sleep_ptr() allows the compiler to remove the unused code and data. This removes the need for __maybe_unused markings etc. Signed-off-by:
-
Jonathan Cameron authored
Letting the compiler remove these functions when the kernel is built without CONFIG_PM support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. Signed-off-by:
-
Nuno Sá authored
There is no reason to include OF as we only need to forward declare 'of_phandle_args'. Previously, some drivers were actually relying on this for some headers (those were already fixed). Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Reviewed-by:
-
Andy Shevchenko authored
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by:
-
- 14 Jun, 2022 7 commits
-
-
Nuno Sá authored
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by:
-
Nuno Sá authored
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by:
-
Nuno Sá authored
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by:
-
Nuno Sá authored
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by:
-
Nuno Sá authored
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by:
-
Nuno Sá authored
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by:
-
Nuno Sá authored
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by:
-
