Soon we will be trying to communicate with the GuC firmware very
early during VF driver probe, before we finish normal init steps.
Split GuC communication initialization code so the GuC MMIO based
communication xe_guc_mmio_send() functions will work where needed.

Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20240111162051.585-1-michal.wajdeczko@intel.comSigned-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>

Since the migrate code is using the identity map for addressing VRAM,
copy chunks may become as small as 64K if the VRAM resource is fragmented.

However, a chunk size smaller that 1MiB may lead to the *next* chunk's
offset into the CCS metadata backup memory may not be page-aligned, and
the XY_CTRL_SURF_COPY_BLT command can't handle that, and even if it could,
the current code doesn't handle the offset calculaton correctly.

To fix this, make sure we align the size of VRAM copy chunks to 1MiB. If
the remaining data to copy is smaller than that, that's not a problem,
so use the remaining size. If the VRAM copy cunk becomes fragmented due
to the size alignment restriction, don't use the identity map, but instead
emit PTEs into the page-table like we do for system memory.

v2:
- Rebase
v3:
- Future proof somewhat by taking into account the real data size to
  flat CCS metadata size ratio. (Matt Roper)
- Invert a couple of if-statements for better readability.
- Fix support for 4K-granularity VRAM sizes. (Tested on DG1).
v4:
- Fix up code comments
- Fix debug printout format typo.
v5:
- Add a Fixes: tag.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: e89b384c ("drm/xe/migrate: Update emit_pte to cope with a size level than 4k")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110163415.524165-1-thomas.hellstrom@linux.intel.com

Drop the "&vm->lock" before returning.

Fixes: 24f947d5 ("drm/xe: Use DRM GPUVM helpers for external- and evicted objects")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>

Check if "bo" is an error pointer before calling xe_bo_lock() on it.

Fixes: d6abc18d ("drm/xe/xe2: Modify xe_bo_test for system memory")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>

This error path should clean up before returning.

Smatch detected this bug:
  drivers/gpu/drm/xe/xe_device.c:487 xe_device_probe() warn: missing unwind goto?

Fixes: 4cb12b71 ("drm/xe/xe2: Determine bios enablement for flat ccs on igfx")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>

Convention for queues in Linux is the producer moves the head and
consumer moves the tail. Fix the access counter queue to conform to
this convention.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

If ACC_QUEUE_NUM_DW % ACC_MSG_LEN_DW != 0 then the access counter queue
logic does not work when wrapping occurs. Add a build bug on to assert
ACC_QUEUE_NUM_DW % ACC_MSG_LEN_DW == 0 to enforce this restriction and
document the code.

v2:
- s/NUM_ACC_QUEUE/ACC_QUEUE_NUM_DW (Brian)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

Convention for queues in Linux is the producer moves the head and
consumer moves the tail. Fix the page fault queue to conform to this
convention.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

If PF_QUEUE_NUM_DW % PF_MSG_LEN_DW != 0 then the page fault queue logic
does not work when wrapping occurs. Add a build bug on to assert
PF_QUEUE_NUM_DW % PF_MSG_LEN_DW == 0 to enforce this restriction and
document the code.

v2:
- s/NUM_PF_QUEUE/PF_QUEUE_NUM_DW (Brian)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

This function is no longer used as the job_timeout is now
updated prior to calling queue_ops.init().
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>

Setting of exec_queue user extensions is moved from the end of the ioctl
function earlier, into __xe_exec_queue_alloc().
This fixes bug in that the USM attributes for access counters were being
applied too late, and effectively were ignored.

However, in order to apply user extensions this early, we can no longer
call q->ops functions.  Instead, make it more efficient. The user extension
functions can simply update the q->sched_props values and they will be
applied by the backend during q->ops->init().

v2: minor changes for readability (Matt)
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>

The purpose here is to allow to optimize exec_queue_set_job_timeout()
in follow-on patch.  Currently it does q->ops->set_job_timeout(...).
But we'd like to apply exec_queue_user_extensions much earlier and
q->ops cannot be called before __xe_exec_queue_init().

It will be much more efficient to instead only have to set
q->sched_props.job_timeout_ms when applying user extensions. That value
will then be used during q->ops->init().
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>

Split __xe_exec_queue_create() into two functions, alloc and init.

We have an issue in that exec_queue_user_extensions are applied too late.
In the case of USM properties, these need to be set prior to xe_lrc_init().
Refactor the logic here, so we can resolve this in follow-on. We only need
the xe_vm_lock held during the exec_queue_init function.
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>

Building drivers/gpu/drm/xe/xe_gt_pagefault.c with GCC 11 results
in the following build errors:

./include/linux/fortify-string.h:57:33: error: writing 16 bytes into a region of size 0 [-Werror=stringop-overflow=]
   57 | #define __underlying_memcpy     __builtin_memcpy
      |                                 ^
./include/linux/fortify-string.h:644:9: note: in expansion of macro ‘__underlying_memcpy’
  644 |         __underlying_##op(p, q, __fortify_size);                        \
      |         ^~~~~~~~~~~~~
./include/linux/fortify-string.h:689:26: note: in expansion of macro ‘__fortify_memcpy_chk’
  689 | #define memcpy(p, q, s)  __fortify_memcpy_chk(p, q, s,                  \
      |                          ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/xe/xe_gt_pagefault.c:340:17: note: in expansion of macro ‘memcpy’
  340 |                 memcpy(pf_queue->data + pf_queue->tail, msg, len * sizeof(u32));
      |                 ^~~~~~
In file included from drivers/gpu/drm/xe/xe_device_types.h:17,
                 from drivers/gpu/drm/xe/xe_vm_types.h:16,
                 from drivers/gpu/drm/xe/xe_bo.h:13,
                 from drivers/gpu/drm/xe/xe_gt_pagefault.c:16:
drivers/gpu/drm/xe/xe_gt_types.h:102:25: note: at offset [1144, 265324] into destination object ‘tile’ of size 8
  102 |         struct xe_tile *tile;
      |                         ^~~~

Fix these by removing -Wstringop-overflow from drm/xe builds.

Closes: https://lore.kernel.org/all/45ad1d0f-a10f-483e-848a-76a30252edbe@paulmck-laptop/
Fixes: 7a8bc117 ("drm/xe: Enable W=1 warnings by default")
Suggested-by: Stephen Rothwell <sfr@rothwell.id.au>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ This particular warning is broken on GCC11. In future changes it will
  be moved to the normal C flags in the top level Makefile (out of
  Makefile.extrawarn), but accounting for the compiler support. Just
  remove it out of xe's forced extra warnings for now ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Don't set SLPC GuC feature ctl flag if skip_guc_pc is true.

v2: Skip the freq related sysfs creation as well (Badal)
v3: Remove unnecessary parenthesis (Lucas)

Fixes: 975e4a37 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Fixes: bef52b5c ("drm/xe: Create a xe_gt_freq component for raw management and sysfs")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20240108225842.966066-1-vinay.belgaumkar@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Add vram frequency sysfs attributes under the below hierarchy;

/device/tile#/memory/freq0
			|-max_freq
			|-min_freq

v2: Drop "vram" from attribute names (Rodrigo)

v3: Add documentation for new sysfs (Riana)
    Drop prefix from XEHP_PCODE_FREQUENCY_CONFIG (Riana)

v4: Create sysfs under tile#/freq0 after removal of
    physical_memsize attrbute

v5: Revert back to creating sysfs under tile#/memory/freq0
    Remove definition of GT_FREQUENCY_MULTIPLIER (Rodrigo)

v6: Rename attributes to max/min_freq (Anshuman)
    Fix review comments (Rodrigo)

v7: Make documentation more verbose
    Move sysfs to separate file (Anshuman)

v8: Fix platform specific conditions and add kernel doc (Anshuman)
    Fix typos and remove redundant headers (Riana)

v9: Fix typo (Riana)
    Change function name to include "sysfs" (Lucas)
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://lore.kernel.org/r/20240109110418.2065101-1-sujaritha.sundaresan@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

After exec_queue has been created, we cannot simply modify q->priority.
This needs to be done by the backend via q->ops.  However in this case,
it would be more efficient to simply pass a flag when creating the
exec_queue and set the desired priority upfront during queue creation.

To that end: new flag EXEC_QUEUE_FLAG_HIGH_PRIORITY is introduced.
The priority field is moved to be with other scheduling properties and
is now exec_queue.sched_props.priority. This is no longer set to initial
value by the backend, but is now set within __xe_exec_queue_create().

Fixes: b4eecedc ("drm/xe: Fix potential deadlock handling page faults")
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>

We need to set q->priority prior to calling guc_exec_queue_add_msg() as
that will call init_policies() and sets the scheduling properties to those
stored in the exec_queue.

Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>

Force max 128KB SLM during WMTP PASS1 Restore.

BSpec: 70202
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20240109055550.679289-1-shekhar.chauhan@intel.comSigned-off-by: Matt Roper <matthew.d.roper@intel.com>

The pointer points to IO memory, but the __iomem annotation was
incorrectly placed. Annotate it correctly, update its usage accordingly
and fix the corresponding sparse error.

Fixes: d8b52a02 ("drm/xe: Implement stolen memory.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-5-thomas.hellstrom@linux.intel.com

There are a couple of pointers pointing to MMIO space. Annotate them
with __iomem and fix the corresponding sparse warnings.

Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: 3b0d4a55 ("drm/xe: Move register MMIO into xe_tile")
Fixes: 399a1332 ("drm/xe: add 28-bit address support in struct xe_reg")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Koby Elbaz <kelbaz@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-4-thomas.hellstrom@linux.intel.com

The pointer points to IO memory, but the __iomem annotation was
incorrectly placed. Annotate it correctly, update its usage accordingly
and fix the corresponding sparse error.

Fixes: 0887a2e7 ("drm/xe: Make xe_mem_region struct")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-3-thomas.hellstrom@linux.intel.com

The regs pointer points to IO memory. Annotate it properly and
fix the corresponding sparse warning.

Fixes: a4e2f3a2 ("drm/xe: refactor xe_mmio_probe_tiles to support MMIO extension")
Cc: Koby Elbaz <kelbaz@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-2-thomas.hellstrom@linux.intel.com

If using the VM_BIND_OP_UNMAP_ALL without any bound vmas for the
vm, we will end up dereferencing an uninitialized variable and leak a
bo lock. Fix this.

v2:
- Updated commit message (Lucas De Marchi)
Reported-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Closes: https://lore.kernel.org/intel-xe/jrwua7ckbiozfcaodx4gg2h4taiuxs53j5zlpf3qzvyhyiyl2d@pbs3plurokrj/Suggested-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Fixes: b06d47be ("drm/xe: Port Xe to GPUVA")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222175904.16732-1-thomas.hellstrom@linux.intel.com

Protect entire IRQ handler by CT being enabled rather than just G2H
handler.

v2: Return on not enabled in CT irq handler (Michal)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>

The intent is to return -EWOULDBLOCK to the user if a long running exec
queue is full during the exec IOCTL. -EWOULDBLOCK aliases to -EAGAIN
which results in the exec IOCTL doing a retry loop. Fix this by ensuring
the retry loop is broken when returning -EWOULDBLOCK.

Fixes: 8ae8a2e8 ("drm/xe: Long running job update")
Reported-by: Sai Gowtham Ch <sai.gowtham.ch@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>

Looks possible to switch from CPU binding to GPU binding mid exec, and
if that happens for the same dma-resv we might use two fence slots, once
for the dummy fence, and another for the actual GPU bind.

References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/698Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

We currently assume that we can upfront know exactly how many fence
slots we will need at the start of the exec, however the TTM bo_validate
can itself consume numerous fence slots, and due to how the
dma_resv_reserve_fences() works it only ensures that at least that many
fence slots are available. With this it is quite possible that TTM
steals some of the fence slots and then when it comes time to do the vma
binding and final exec stage we are lacking enough fence slots, leading
to some nasty BUG_ON(). A simple fix is to reserve our own fences later,
after the validate stage.

References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/698Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Release all mmap mappings for all vram objects which are associated
with userfault such that, while pcie function in D3hot, any access
to memory mappings will raise a userfault.

Upon userfault, in order to access memory mappings, if graphics
function is in D3 then runtime resume of dgpu will be triggered to
transition to D0.

v2:
  - Avoid iomem check before bo migration check as bo can migrate
    to system memory (Matthew Auld)
v3:
  - Delete bo userfault link during bo destroy
  - Upon bo move (vram-smem), do bo userfault link deletion in
    xe_bo_move_notify instead of xe_bo_move (Thomas Hellström)
  - Grab lock in rpm hook while deleting bo userfault link (Matthew Auld)
v4:
  - Add kernel doc and wrap vram_userfault related
    stuff in the structure (Matthew Auld)
  - Get rpm wakeref before taking dma reserve lock (Matthew Auld)
  - In suspend path apply lock for entire list op
    including list iteration (Matthew Auld)
v5:
  - Use mutex lock instead of spin lock
v6:
  - Fix review comments (Matthew Auld)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #For the xe_bo_move_notify() changes
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20240104130702.950078-1-badal.nilawar@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Recommendation is to read FUSE4 register to check if WMTP has been
enabled/disabled by HW. If enabled we don't need to do anything special,
however if disabled recommendation is to also disable the WMTP mode in
the FF_SLICE_CS_CHICKEN2 register, falling back to thread-group and
mid-batch preemption only. However on Linux, the per-context CS_CHICKEN1
is how userspace controls pre-emption, so instead use the default lrc to
disable WMTP using CS_CHICKEN1, if disabled by HW. Userspace is still
free to set CS_CHICKEN1 to whatever they want later.

v2: remove redundant version check and also add descriptive name(Matt)
v3: remove usage of REG_FIELD_GET(Matt)

Cc: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20240104182615.21327-1-nirmoy.das@intel.comSigned-off-by: Matt Roper <matthew.d.roper@intel.com>

As workarounds for pre-production DG2 were dropped in
commit 707d1b992cfe ("drm/xe/dg2: Drop pre-production workarounds"),
there's no point running the kunit tests for them. Drop
those steppings from kunit.

Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231221163213.3849523-1-lucas.demarchi@intel.comSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

There is a spelling mistake in a drm_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20240102092014.3347566-1-colin.i.king@gmail.com

It looks that declaration of kunit_get_current_test() was
available in xe_guc_relay.c only with CONFIG_KUNIT enabled.
If CONFIG_KUNIT is disabled we fail with:

In file included from ../include/linux/build_bug.h:5,
                 from ../include/linux/bitfield.h:10,
                 from ../drivers/gpu/drm/xe/xe_guc_relay.c:6:
../drivers/gpu/drm/xe/xe_guc_relay.c: In function ‘xe_guc_relay_process_guc2vf’:
../drivers/gpu/drm/xe/xe_guc_relay.c:863:52: error: implicit declaration of function ‘kunit_get_current_test’ [-Werror=implicit-function-declaration]
  863 |  if (unlikely(!IS_SRIOV_VF(relay_to_xe(relay)) && !kunit_get_current_test()))
      |                                                    ^~~~~~~~~~~~~~~~~~~~~~
../include/linux/compiler.h:77:42: note: in definition of macro ‘unlikely’
   77 | # define unlikely(x) __builtin_expect(!!(x), 0)
      |                                          ^
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: 811fe9f5 ("drm/xe/guc: Introduce Relay Communication for SR-IOV")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20240105171947.321-1-michal.wajdeczko@intel.comSigned-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>

This kunit verifies the mocs registers content
with the KMD programmed values before and after
GT reset.

v2: Remove extra blank lines between the local variables
definitions (Matt Roper)

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ruthuvikas Ravikumar <ruthuvikas.ravikumar@intel.com>
Signed-off-by: Janga Rahul Kumar <janga.rahul.kumar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231222192352.927101-1-janga.rahul.kumar@intel.comSigned-off-by: Matt Roper <matthew.d.roper@intel.com>

GuC Relay infrastructure is ready, start handling relay messages
from the GuC to unblock testing on the live system.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-11-michal.wajdeczko@intel.comSigned-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>

Add few tests to make sure that some negative and normal use
scenarios of the GuC Relay are implemented correctly.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-10-michal.wajdeczko@intel.comSigned-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>

We want to use replacement functions in upcoming kunit tests.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-9-michal.wajdeczko@intel.comSigned-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>

There are scenarios where SR-IOV Virtual Function (VF) driver will
need to get additional data that is not available over VF MMIO BAR
nor could be queried from the GuC firmware and must be obtained
from the Physical Function (PF) driver.

To allow such communication between VF and PF drivers, GuC supports
set of H2G and G2H actions which allows relaying embedded messages,
that are otherwise opaque for the GuC.

To allow use of this communication mechanism, provide functions for
sending requests and handling replies and placeholder where we will
put handlers for incoming requests.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-8-michal.wajdeczko@intel.comSigned-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>

The communication between Virtual Function (VF) drivers and
Physical Function (PF) drivers is based on the GuC firmware
acting as a proxy (relay) agent.

Add related ABI definitions that we will be using in upcoming
patches with our GuC Relay implementation.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-7-michal.wajdeczko@intel.comSigned-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>

In upcoming new GuC ABI definitions we will want to refer to max
number of dwords that could fit into CTB HXG message. Add explicit
definition named as GUC_CTB_MAX_DWORDS and start using it.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-6-michal.wajdeczko@intel.comSigned-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>