- 17 Nov, 2011 11 commits
-
-
Dan Carpenter authored
We recently introduced a return here, but we need to call kfree first. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
sk_buff structs should be freed using kfree_skb(). This was introduced recently in 02945821 "mac80211: Save probe response data for bss". Signed-off-by:
-
Helmut Schaa authored
Finding the group index for a specific rate is done by looping through all groups and returning if the correct one is found. This code is called for each tx'ed frame and thus it makes sense to reduce its runtime. Do this by calculating the group index by this formula based on the SGI and HT40 flags as well as the stream number: idx = (HT40 * 2 * MINSTREL_MAX_STREAMS) + (SGI * MINSTREL_MAX_STREAMS) + (streams - 1) Hence, the groups are ordered by th HT40 flag first, then by the SGI flag and afterwards by the number of used streams. This should reduce the runtime of minstrel_ht_get_group_idx considerable. Signed-off-by:Helmut Schaa <helmut.schaa@googlemail.com> Acked-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Helmut Schaa authored
The drivers are not required to fill in rate->count if rate->idx is set to -1. Hence, we should first check rate->idx before accessing rate->count. Signed-off-by:
-
Johannes Berg authored
The shared key authentication frame that needs to be encrypted (the third one in the shared key handshake) is directly encrypted in ieee80211_send_auth and the IEEE80211_TX_INTFL_DONT_ENCRYPT is set. All others are not encrypted, so the only way to get to this is erroneously on no-monitor AP side. Remove the special case for authentication frames to fix the AP shared key side when operating without cooked monitor interfaces -- with cooked monitor the IEEE80211_TX_INTFL_DONT_ENCRYPT also gets set, so we never get here -- an AP never encrypts auth frames. Without this patch, an AP operating in WEP mode with my no-monitor patches would erroneously encrypt all authentication frames, instead of none. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Joe Perches authored
Add and use pr_fmt and pr_<level> Remove useless double parentheses from macros. Remove function names from format strings, add to pr_debug use. Coalesce formats. Remove uncompileable undeclared variable in a DMA_NONE use. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Ilan Elias authored
Fix indentation in nci.h file. Signed-off-by:
Ilan Elias <ilane@ti.com> Signed-off-by:
-
Rajkumar Manoharan authored
Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
Remove all wlan weight macros and group it together for better understanding & readability. It makes the code reusable for AR9462 wlan weights. Signed-off-by:
-
Rajkumar Manoharan authored
This patch removes btcoex_enable from stomp type change and let it be called from callee functions that makes the code can be reusable for MCI changes. Signed-off-by:
-
-
- 11 Nov, 2011 29 commits
-
-
Johannes Berg authored
The warning is spurious -- if !sta we always exit without using the unassigned qos variable, and if we do find the sta we assign it. Signed-off-by:
-
John W. Linville authored
CC [M] drivers/net/wireless/libertas/cfg.o drivers/net/wireless/libertas/cfg.c: In function ‘lbs_ret_scan’: drivers/net/wireless/libertas/cfg.c:636:24: warning: ignoring return value of ‘cfg80211_inform_bss’, declared with attribute warn_unused_result drivers/net/wireless/libertas/cfg.c: In function ‘lbs_join_post’: drivers/net/wireless/libertas/cfg.c:1766:21: warning: ignoring return value of ‘cfg80211_inform_bss’, declared with attribute warn_unused_result Signed-off-by: -
John W. Linville authored
CC [M] drivers/net/wireless/brcm80211/brcmsmac/srom.o drivers/net/wireless/brcm80211/brcmsmac/srom.c: In function ‘_initvars_srom_pci’: drivers/net/wireless/brcm80211/brcmsmac/srom.c:641:6: warning: ‘val’ may be used uninitialized in this function Signed-off-by: -
Franky Lin authored
Referenced struct returned by cfg80211_inform_bss must be released with cfg80211_put_bss to avoid memory leak. Reviewed-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Franky Lin authored
all the devices supported or will be supported by brcmfmac do not have a PCMCIA bus core. So remove the corresponding code. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com Signed-off-by:
-
Arend van Spriel authored
In several places in dhd_sdio.c a skb packet queue was being emptied and the packets freed. This warrants to have a function in place to do this. Reviewed-by:
Alwin Beukers <alwin@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The function brcmu_pkt_buf_free_skb() was following the next pointer to free all linked packets. However, it is only called with unlinked packets so this can be removed. Reviewed-by:
-
Arend van Spriel authored
The functions brcmu_pkttotlen() is only used in brcmfmac driver so it has been moved there. It also does not use the sk_buff next pointer anymore but walks a skb queue to determine the total length. Reviewed-by:
-
Alwin Beukers authored
Combined mac configuration for promiscious mode and monitor mode, and removed unused monitor mode flag in pub structure. Reviewed-by:
-
Arend van Spriel authored
Instead of dealing with sk_buff prev pointers the queue functions now make use of the sk_buff_head functions provided by the kernel. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
-
Arend van Spriel authored
The function brcmu_pkttotlen calculates the total length of a sk_buff chain following the next pointer. In brcmsmac this is not needed as in each place where it was used the provided sk_buff had a NULL pointer as next field value. Reviewed-by:
-
Franky Lin authored
sdio_chip.c is dedicated to sdio bus chip. No need to retrieve id for bus core Reviewed-by:
-
Franky Lin authored
This patch is part of the series of adding new backplane support Reviewed-by:
-
Franky Lin authored
This patch is part of the series of adding new backplane support Reviewed-by:
-
Franky Lin authored
This patch is part of the series adding new backplane support Reviewed-by:
-
Franky Lin authored
New type of backplane interconnect support is needed for bcm4330 Reviewed-by:
-
Alwin Beukers authored
Reported-by:
-
Arend van Spriel authored
The macro definition D11_PHY_HDR_LEN was defined in d11.h and pub.h. It has been removed from pub.h. Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Reviewed-by:
-
Arend van Spriel authored
The brcmsmac had own definitions for the access categories. The mac80211 header provides these as well as they are used in the conf_tx callback. As the definitions did not match the driver configured the tx parameters to the wrong queue. Reviewed-by:
-
Arend van Spriel authored
There were a couple of code segments left that were placed under a macro definition that was not applicable or not used in the brcmsmac driver. These pieces of code have been removed. Reviewed-by:
-
Arend van Spriel authored
This fixes issue when using OTP memory. It was introduced by following commit: commit 028f78d4 Author: Arend van Spriel <arend@broadcom.com> Date: Fri Oct 21 16:16:35 2011 +0200 brcm80211: smac: change buffer endianess convert function interface Signed-off-by:
-
Don Fry authored
The nvm_device_type is eeprom related and does not need to be part of the iwl_priv structure. Move it and eliminate access to the iwl_priv structure. Signed-off-by:
Don Fry <donald.h.fry@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Don Fry authored
Make the eeprom routines less dependent on the iwl_priv structure. Don't use the priv when bus structure is sufficient. Signed-off-by:
-
Venkataraman, Meenakshi authored
iwlwifi tries to avoid using antenna B in BT combo devices when BT is active. A bug in the rate-scaling algorithm was causing the combo device to never attempt MIMO rates. Fix the algorithm to opportunistically try MIMO rates when BT traffic is low. Signed-off-by:
Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Users complain that the traffic gets stalled sometimes. This will allow easier debugging. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
This bit was used only once. Use IWL_DL_INFO instead. Signed-off-by:
-
Johannes Berg authored
Due to the P2P context always having the associated bit set when we got to this code, we were splitting up the remain-on-channel durations unconditionally. This isn't needed -- if the P2P context is in P2P device type mode it doesn't impose restrictions on timing to skip it in that case. Signed-off-by:
-
Johannes Berg authored
The device expects TU but we get ms, so convert. Signed-off-by:
-
Emmanuel Grumbach authored
Warning introduced by c847474b7dfdda304d0d8ffcc5a9db546b1cb3e9 iwlwifi: check status before send command Signed-off-by:
-
