- 03 Mar, 2011 6 commits
-
-
Mark Brown authored
A CODEC pointer is optional (and is checked for in most contexts within DAPM) - add checks to the few places where it was missed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Rather than indirecting through the CODEC we can look the card up directly from the card pointer in the DAPM context. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
-
Dimitris Papastamos authored
The patch 'ASoC: WM8994: Improve Playback Robustness' did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 Mar, 2011 8 commits
-
-
Mark Brown authored
The WM9081 IRQ output can be either active high or active low and can support either CMOS or open drain modes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Javier Martin authored
When choosing IMX_DMA flag, burtsizes are set to its default value (0) which leads to driver malfunction. Change them to 4. DSP_B interface needs additional flag to match DSP_B formats as described in several codecs as wm8741 and aic3205. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Dimitris Papastamos authored
The patch 'ASoC: WM8994: Improve Playback Robustness' did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
-
Dimitris Papastamos authored
Ensure that the ADCs are provided with a clock as the previous patch "ASoC: WM8994: Improve playback robustness" did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
Dimitris Papastamos authored
Since we began using the late clock disable functionality, ensure that we don't disable the clock if any of the ADC or DAC paths are still enabled. This happens when we have simultaneous playback and recording. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
Mark Brown authored
It went AWOL in the multi-component conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
-
- 28 Feb, 2011 3 commits
-
-
Stephen Warren authored
tegra_dma_allocate_channel() returns NULL on errors, not an error pointer. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Zeng Zhaoming authored
Remove unnecessary headers: - mach/hardware.h in sgtl5000.c - linux/i2c.h in sgtl5000.h Signed-off-by: Zeng Zhaoming <b32542@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 26 Feb, 2011 1 commit
-
-
Mark Brown authored
-
- 25 Feb, 2011 10 commits
-
-
Eric Bénard authored
Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Liam Girdwood <lrg@slimogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
There's a general move to use dev_pm_ops rather than bus specific functions in order to facilitate work on the PM core. Do this conversion to WM2000. The driver ought to be updated to work better in a multi-component model but the mechanical conversion ensures that we avoid blocking PM core work until that happens. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Eric Bénard authored
commit f0fba2ad included a mistake on the name of the platform in the snd_soc_dai_link structure. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
Zeng Zhaoming authored
Add Freescale SGTL5000 codec support. Supported features: - line-in and mic input - headphone and line-out output - line-in bypass ADC and DAC to headphone - 16, 20, 24, 32 bit audio - 8 ~ 96k sample rates Signed-off-by: Zeng Zhaoming <zhaoming.zeng@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Justin P. Mattock authored
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
-
Stephen Warren authored
The utilities will be required by every machine driver. Including the utility object directly into every machine driver causes a build failure if the modules are actually built into the kernel, since each will define the symbols exported by the utility file. Solve this by moving the utility object into a separate module. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Dimitris Papastamos authored
Sometimes the name of the control switch of a dapm route contains spaces which makes it impossible to distinguish it from the source widget. Add quotes around the names of the widgets to makes these parsable. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Dmitry Eremin-Solenikov authored
Correct names for pxa AC97 DAI are pxa2xx-ac97 and pxa2xx-ac97-aux. Fix that for all PXA platforms. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 24 Feb, 2011 1 commit
-
-
Mark Brown authored
We're currently not passing anything and this will make the card and so on more discoverable. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 22 Feb, 2011 10 commits
-
-
Mark Brown authored
The default WM8958 jack detection handler implements a full set of buttons and also support for video detection. Support for multi-button jacks is fairly system specific and will usually require some tuning for headsets so simplify the implementation to only report a simple short to ground button, leaving multi-button headsets to be handled by system specific code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
The WM8958 has a different microphone bias architecture to WM8994 so needs different configuration to WM8994. Support this in platform data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Allow direct routing of the WM8958 microphone detection signal to a GPIO to be used, saving the need to demux the interrupt. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
As bias level changes can be quite time consuming and the bias changes for multiple devices aren't strongly tied to each other (if anything it can be advantageous to bring different devices up together) we can improve the state transition time for multi-component systems by running the bias level changes for all the devices in parallel. This is very simple to achieve using the kernel async functionality so use that to schedule the work. This should have no practical effect for the overwhelming majority of systems which have a single DAPM context - we'll bounce into another thread to do the bias level change but otherwise everything will happen in exactly the same order as it did before. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
We can get the card from the DAPM context so don't bother passing it as an argument. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
-
Mark Brown authored
The microphone detection functionality requires a clock to work. In any non-detection case where the MICBIAS is enabled CLK_SYS will be needed anyway so there is no negative impact on power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 18 Feb, 2011 1 commit
-
-
Mark Brown authored
The microphone detection functionality requires a clock to work. In any non-detection case where the MICBIAS is enabled CLK_SYS will be needed anyway so there is no negative impact on power consumption. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-