Since we are configuring things via MDP4_PIPE regs in the plane, it seems
like setting the dimensions of the primary plane on the OVLP/DMA regs in
crtc is unnecessary.  This will make life easier when we want to do a
nofb modeset.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since primary-plane support in core, we can just use crtc->primary.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since primary-plane support in core, we can just use crtc->primary.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Currently forcing the video mode from the kernel command line (for example
video=HDMI-A-1:1280x720-16@60) does not correctly set the number of bits
per pixel. This is due to a rather aggressive override in
msm_fbdev_create(). This is a particular problem for Android bring up
because the software EGL fallbacks don't support 32bpp.

Since the overrides are actually the default values anyway then this
problem can be trivially fixed by removing the overrides completely.

Change was tested by dd'ing a test image to /dev/fb0 with no video=
(still 32bpp), video=1920x1080-32@60, video=1920x1080-24@60 and
video=1920x1080-16@60 .
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Currently msm does not implement gem_prime_mmap. Without this it is not
possible to draw onto a dma-buf from userspace (making its very hard to
implement the Android rendering model).

Fixing this is just a matter of adding a little boilerplate.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Split up hdmi_init() into hdmi_init() (done at hdmi sub-device
bind/probe time) and hdmi_modeset_init() done from master driver's
modeset_init().

Anything that can fail due to dependencies on other drivers which
may be missing or not probed yet should go in hdmi_init(), so that
devm error/cleanup paths work properly.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Move anything that can fail after call to base class msm_gpu_init().
This way, if we fail, active_list has already been initialized so we
don't trip 'WARN_ON(!list_empty(&gpu->active_list))' in
msm_gpu_cleanup().
Signed-off-by: Rob Clark <robdclark@gmail.com>

Fixes a potential error, spotted by Felipe with randconfig:

-----
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c: In function ‘mdp4_kms_init’:
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c:384:2: error: implicit declaration \
        of function ‘devm_regulator_get_exclusive’ [-Werror=implicit-function-declaration]
  mdp4_kms->vdd = devm_regulator_get_exclusive(&pdev->dev, "vdd");
  ^
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c:384:16: error: assignment makes \
        pointer from integer without a cast [-Werror]
  mdp4_kms->vdd = devm_regulator_get_exclusive(&pdev->dev, "vdd");
                ^
-----

Also add a brief comment explaining the use of _get_exclusive()
Reported-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input

Some drivers erroneously treat the .pitch and .size fields of struct
drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
header has a comment denoting them as outputs, that seemingly wasn't
enough to make drivers use them properly.

The result is that some userspace doesn't explicitly zero out those
fields, assuming that the kernel won't use them. That causes problems
since the data within the structure might be uninitialized, so bogus
data may end up confusing drivers (ridiculously large values for the
pitch, ...).

This series attempts to improve the situation by fixing all drivers to
not use the output fields. Furthermore to spare new drivers this bad
surprise, the DRM core now zeros out these fields prior to handing the
data structure to the driver.

Lessons learned from this are that future IOCTLs should be properly
documented (in the DRM DocBook for example) and should be rigorously
defined. To prevent misuse like this, userspace should be required to
zero out all output fields. The kernel should check for this and fail
if that's not the case.

* tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
  drm/cma: Remove call to drm_gem_free_mmap_offset()
  drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
  drm/rcar: gem: dumb: pitch is an output
  drm/omap: gem: dumb: pitch is an output
  drm/cma: Introduce drm_gem_cma_dumb_create_internal()
  drm/doc: Add GEM/CMA helpers to kerneldoc
  drm/doc: mm: Fix indentation
  drm/gem: Fix a few kerneldoc typos

This passes the guest preferences for a where to place the
outputs through to userspace. Userspace would need to be updated
to take note of this information, X server and GNOME.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Virtual GPUs would like to give the guest some indication where on the screen
the outputs are layed out. So far we only provide modes, these
properties could be exposed to userspace so the desktop environment
could use them as hints to set the correct offsets.

v2: rename properties to be more consistent.
Signed-off-by: Dave Airlie <airlied@redhat.com>

While looking through drm_crtc.c to double-check make locking changes
I've noticed that there's a few other places that would now benefit
from simplified return value handling.

So let's flatten the control flow and replace and always 0 ret with 0
where possible.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/tegra: Changes for v3.19-rc1

The highlights in this pull request are:

  * IOMMU support: The Tegra DRM driver can now deal with discontiguous
    buffers if an IOMMU exists in the system. That means it can allocate
    using drm_gem_get_pages() and will map them into IOVA space via the
    IOMMU API. Similarly, non-contiguous PRIME buffers can be imported
    from a different driver, which allows better integration with gk20a
    (nouveau) and less hacks.

  * Universal planes: This is precursory work for atomic modesetting and
    will allow hardware cursor support to be implemented on pre-Tegra114
    where RGB cursors were not supported.

  * DSI ganged-mode support: The DSI controller can now gang up with a
    second DSI controller to drive high resolution DSI panels.

Besides those bigger changes there is a slew of fixes, cleanups, plugged
memory leaks and so on.

* tag 'drm/tegra/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux: (44 commits)
  drm/tegra: gem: Check before freeing CMA memory
  drm/tegra: fb: Add error codes to error messages
  drm/tegra: fb: Properly release GEM objects on failure
  drm/tegra: Detach panel when a connector is removed
  drm/tegra: Plug memory leak
  drm/tegra: gem: Use more consistent data types
  drm/tegra: fb: Do not destroy framebuffer
  drm/tegra: gem: dumb: pitch and size are outputs
  drm/tegra: Enable the hotplug interrupt only when necessary
  drm/tegra: dc: Universal plane support
  drm/tegra: dc: Registers are 32 bits wide
  drm/tegra: dc: Factor out DC, window and cursor commit
  drm/tegra: Add IOMMU support
  drm/tegra: Fix error handling cleanup
  drm/tegra: gem: Use dma_mmap_writecombine()
  drm/tegra: gem: Remove redundant drm_gem_free_mmap_offset()
  drm/tegra: gem: Cleanup tegra_bo_create_with_handle()
  drm/tegra: gem: Extract tegra_bo_alloc_object()
  drm/tegra: dsi: Set up PHY_TIMING & BTA_TIMING registers earlier
  drm/tegra: dsi: Replace 1000000 by USEC_PER_SEC
  ...

drm: Miscellaneous fixes for v3.19-rc1

This is a small collection of fixes that I've been carrying around for a
while now. Many of these have been posted and reviewed or acked. The few
that haven't I deemed too trivial to bother.

* tag 'drm/fixes/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
  video/hdmi: Relicense header under MIT license
  drm/gma500: mdfld: Reuse video/mipi_display.h
  drm: Make drm_mode_create_tv_properties() signature consistent
  drm: Implement drm_get_pci_dev() dummy for !PCI
  drm/prime: Use unsigned type for number of pages
  drm/gem: Fix typo in kerneldoc
  drm: Use const data when creating blob properties
  drm: Use size_t for blob property sizes

drm/panel: Changes for v3.19-rc1

This contains support for a couple of new panels, updates for some GPIO
API changes and a bunch of updates to the MIPI DSI support that should
make it easier to write panel drivers in the future.

* tag 'drm/panel/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux: (31 commits)
  drm/panel: Add Sharp LQ101R1SX01 support
  drm/dsi: Do not require .owner field to be set
  drm/dsi: Resolve MIPI DSI device from phandle
  drm/dsi: Implement DCS set_{column,page}_address commands
  drm/dsi: Implement DCS {get,set}_pixel_format commands
  drm/dsi: Implement DCS get_power_mode command
  drm/dsi: Implement DCS soft_reset command
  drm/dsi: Implement DCS nop command
  drm/dsi: Add to DocBook documentation
  drm/dsi: Implement some standard DCS commands
  drm/dsi: Implement generic read and write commands
  drm/panel: s6e8aa0: Use standard MIPI DSI function
  drm/dsi: Add mipi_dsi_set_maximum_return_packet_size() helper
  drm/dsi: Constify mipi_dsi_msg
  drm/dsi: Make mipi_dsi_dcs_{read,write}() symmetrical
  drm/dsi: Add DSI transfer helper
  drm/dsi: Add message to packet translator
  drm/dsi: Introduce packet format helpers
  drm/panel: s6e8aa0: Fix build warnings on 64-bit
  drm/panel: ld9040: Fix build warnings on 64-bit
  ...

Merge tag 'drm-intel-next-2014-11-07-fixups' of git://anongit.freedesktop.org/drm-intel into drm-next

- skl watermarks code (Damien, Vandana, Pradeep)
- reworked audio codec /eld handling code (Jani)
- rework the mmio_flip code to use the vblank evade logic and wait for rendering
  using the standard wait_seqno interface (Ander)
- skl forcewake support (Zhe Wang)
- refactor the chv interrupt code to use functions shared with vlv (Ville)
- prep work for different global gtt views (Tvrtko Ursulin)
- precompute the display PLL config before touching hw state (Ander)
- completely reworked panel power sequencer code for chv/vlv (Ville)
- pre work to split the plane update code into a prepare and commit phase
  (Gustavo Padovan)
- golden context for skl (Armin Reese)
- as usual tons of fixes and improvements all over

* tag 'drm-intel-next-2014-11-07-fixups' of git://anongit.freedesktop.org/drm-intel: (135 commits)
  drm/i915: Use correct pipe config to update pll dividers. V2
  drm/i915: Plug memory leak in intel_shared_dpll_start_config()
  drm/i915: Update DRIVER_DATE to 20141107
  drm/i915: Add gen to the gpu hang ecode
  drm/i915: Cache HPLL frequency on VLV/CHV
  Revert "drm/i915/vlv: Remove check for Old Ack during forcewake"
  drm/i915: Make mmio flip wait for seqno in the work function
  drm/i915: Make __wait_seqno non-static and rename to __i915_wait_seqno
  drm/i915: Move the .global_resources() hook call into modeset_update_crtc_power_domains()
  drm/i915/audio: add DOC comment describing HDA over HDMI/DP
  drm/i915: make pipe/port based audio valid accessors easier to use
  drm/i915/audio: add audio codec enable debug log for g4x
  drm/i915/audio: add audio codec disable on g4x
  drm/i915: enable audio codec after port
  drm/i915/audio: add vlv/chv/gen5-7 audio codec disable sequence
  drm/i915/audio: rewrite vlv/chv and gen 5-7 audio codec enable sequence
  drm/i915/skl: Enable Gen9 RC6
  drm/i915/skl: Gen9 Forcewake
  drm/i915/skl: Log the order in which we flush the pipes in the WM code
  drm/i915/skl: Flush the WM configuration
  ...

Don't BUG out if the link reports an invalid (or plain unknown)
bandwidth value, but report the failure and fail gracefully.

Fixes a trivial compiler warning in case the BUG is ever compiled away.

Link: http://lkml.kernel.org/p/1415785566-12758-1-git-send-email-geert@linux-m68k.orgSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

For async commit, it is *intentional* that those locks are not held.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Now that we're using lists instead of kfifo to store drm flip-work tasks
we do not need the size parameter passed to drm_flip_work_init function
anymore.
Moreover this function cannot fail anymore, we can thus remove the return
code.

Modify drm_flip_work_init users to take account of these changes.

[airlied: fixed two unused variable warnings]
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Make use of lists instead of kfifo in order to dynamically allocate
task entry when someone require some delayed work, and thus preventing
drm_flip_work_queue from directly calling func instead of queuing this
call.
This allow drm_flip_work_queue to be safely called even within irq
handlers.

Add new helper functions to allocate a flip work task and queue it when
needed. This prevents allocating data within irq context (which might
impact the time spent in the irq handler).
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Use the new pipe config values to calculate the updated pll dividers.

This regression was introduced in

commit 0dbdf89f27b17ae1eceed6782c2917f74cbb5d59
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Wed Oct 29 11:32:33 2014 +0200

    drm/i915: Add infrastructure for choosing DPLLs before disabling crtcs

	and

	commit 00d958817dd3daaa452c221387ddaf23d1e4c06f
	Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
	Date:   Wed Oct 29 11:32:36 2014 +0200

	    drm/i915: Covert remaining platforms to choose DPLLS before disabling CRTCs

v2: Use intel_pipe_will_have_type() to look at new configuration - Ander
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
CC: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

dma_free_writecombine() must not be called on a buffer that couldn't be
allocated. Check for a valid virtual address before attempting to free
the memory to avoid a crash.
Reported-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This helps in determining what errors happened at specifics points in
the initialization sequence.
Signed-off-by: Thierry Reding <treding@nvidia.com>

When fbdev initialization fails, make sure to unreference the GEM
objects properly. Note that we can't do this in the general error
unwinding path because ownership of the GEM object references is
transferred to the framebuffer upon creation.
Signed-off-by: Thierry Reding <treding@nvidia.com>

When the DRM device is torn down and the connector is removed, make sure
to detach the panel to make sure there are no dangling pointers.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Free the DRM device-private memory upon driver unload to make sure the
memory doesn't leak.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Use size_t consistently for sizes and u32/u64 instead of uint32_t and
uint64_t.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Drop a reference instead of directly calling the framebuffer .destroy()
callback at fbdev free time. This is necessary to make sure the object
isn't destroyed if anyone else still has a reference.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>

When creating a dumb buffer object using the DRM_IOCTL_MODE_CREATE_DUMB
IOCTL, only the width, height, bpp and flags parameters are inputs. The
caller is not guaranteed to zero out or set handle, pitch and size, so
the driver must not treat these values as possible inputs.

Fixes a bug where running the Weston compositor on Tegra DRM would cause
an attempt to allocate a 3 GiB framebuffer to be allocated.

Fixes: de2ba664 ("gpu: host1x: drm: Add memory manager and fb")
Cc: stable@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>

The hotplug handling needs access to the DRM device, which only appears
at ->init() time. Disable interrupts up until that time. Similarly, when
an output is removed, disable the hotplug interrupt again because the
DRM device (and with it the hotplug infrastructure) is going away.

Also make sure to only access the DRM device if it's available. Given
the above change for the hotplug interrupt this should really never
happen, but the extra check doesn't hurt either.
Signed-off-by: Thierry Reding <treding@nvidia.com>

This allows the primary plane and cursor to be exposed as regular
DRM/KMS planes, which is a prerequisite for atomic modesetting and gives
userspace more flexibility over controlling them.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Using an unsigned long type will cause these variables to become 64-bit
on 64-bit SoCs. In practice this should always work, but there's no need
for carrying around the additional 32 bits.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The sequence to commit changes to the DC, window or cursor configuration
is repetitive and can be extracted into separate functions for ease of
use.
Signed-off-by: Thierry Reding <treding@nvidia.com>

When an IOMMU device is available on the platform bus, allocate an IOMMU
domain and attach the display controllers to it. The display controllers
can then scan out non-contiguous buffers by mapping them through the
IOMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The DRM driver's ->load() implementation didn't do a good job (no job at
all really) cleaning up on failure. Fix that by undoing any prior setup
when an error occurs. This requires a bit of rework to make it possible
to clean up fbdev midway.

This was tested by injecting errors at various points during the
initialization sequence and verifying that error cleanup didn't crash
and no memory leaked (using kmemleak).
Reported-by: Stéphane Marchesin <marcheu@chromium.org>
Reported-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Use the existing API rather than open-coding equivalent functionality
in the driver.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The drm_gem_object_release() function already performs this cleanup, so
there is no reason to do it explicitly.
Signed-off-by: Thierry Reding <treding@nvidia.com>

There is only a single location where the function needs to do cleanup.
Skip the error unwinding path and call the cleanup function directly
instead.
Signed-off-by: Thierry Reding <treding@nvidia.com>

This function implements the common buffer object allocation used for
both allocation and import paths.
Signed-off-by: Thierry Reding <treding@nvidia.com>