These laptops boot with wifi as hard-blocked, with no obvious way to
enable it. Using a quirk to set wapf=4 solves the problem.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Prevents acer-wmi from blocking wifi on HP Omen 15 laptops
Signed-off-by: Michael Powell <michael_powell@mentor.com>
[david.ward@ll.mit.edu: Resubmitted clean patch]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

vdbg_printk when not using CONFIG_THINKPAD_ACPI_DEBUG uses
no_printk which produces no logging output but always
evaluates arguments.

Change the macro to surround the no_printk call with
	do { if (0) no_printk(...); } while (0)
to avoid the unnecessary argument evaluations.

$ size drivers/platform/x86/thinkpad_acpi.o*
   text	   data	    bss	    dec	    hex	filename
  60918	   6184	    824	  67926	  10956	drivers/platform/x86/thinkpad_acpi.o.new
  60927	   6184	    824	  67935	  1095f	drivers/platform/x86/thinkpad_acpi.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Since Surface Pro 3 does not follow the specs of "Windows ACPI Design
Guide for SoC Platform", code in drivers/input/misc/soc_array.c can
not detect these buttons on it. According to bios implementation,
Surface Pro 3 encapsulates these buttons in a device named "VGBI",
with _HID "MSHW0028". When any of the buttons is pressed, a specify
ACPI notification code for this button will be delivered to "VGBI". For
example, if power button is pressed down, ACPI notification code of 0xc6
will be sent by Notify(VGBI, 0xc6).

This patch leverages "VGBI" to distinguish different ACPI notification
code from Power button, Home button, Volume button, then dispatches these
code to input layer. Lid is already covered by acpi button driver, so
there's no need to rewrite.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=84651Tested-by: Ethan Schoonover <es@ethanschoonover.com>
Tested-by: Peter Amidon <psa.pub.0@picnicpark.org>
Tested-by: Donavan Lance <tusklahoma@gmail.com>
Tested-by: Stephen Just <stephenjust@gmail.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[dvhart@linux.intel.com: Formatting corrections in MAINTAINERS and Intel (c)]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

acpi_bus_register_driver() already returns an appropriate value (0 on
success, and some negative value on error) to be used in __init functions
so the goto/label is redundant in hpwl_init thus remove it and directly
return the value
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

There is at least one (mine) Yoga 2 Pro in existence that has incorrect
product version stored in DMI (reading as "INVALID"), causing it to not be
recognized as Yoga 2 by ideapad-laptop module, which in turn causes
non-existent hardware rfkills to be always reported as blocked.

This change adds a second check by board name, which is "Yoga2".
Looks like it also happens to be "INVALID" on some other Yoga 2 machines
where product version is correct instead, so the original check is left
intact to catch both cases.
Signed-off-by: Sebastian Krzyszkowiak <dos@dosowisko.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Asus F3M has two keys labeled with an icon of a touchpad. The first,
reported as 0x6B is next to the power key and the second, reported as
0x6A, is F9 combined with Fn button. When I was pressing the latter, I was
getting "Unknown key 6a pressed" message before applying this patch.

Asus F3M does not support WMI so the commit does not update key mappings
in the asus-nb-wmi.c file.

I have not tested this mapping on any other Asus laptop.
Signed-off-by: Łukasz Stelmach <stlman@poczta.fm>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

As of March 31th 2015, the mailing-list service finished [1].

This patch simply removes such address.

[1] http://goo.gl/F6jS5rSigned-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Like some of the other Yoga models the Lenovo Yoga 3 14 does not have a
hw rfkill switch, and trying to read the hw rfkill switch through the
ideapad module causes it to always reported blocking breaking wifi.

This commit adds the Lenovo Yoga 3 14 to the no_hw_rfkill dmi list, fixing
the wifi breakage.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1239050
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Given that some features were added (/dev/toshiba_acpi device), some
clean-ups and minor (cosmetic) changes all over the driver code, bump
the driver version to 0.23 to reflect these overall changes.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

A previous patch added explicit feature checks for support, *SUCCESS*
and *FAILURE to the HCI/SCI *{get, set} functions.

This patch removes some unnedded checks to the driver HCI/SCI
functions given that the default error return value is now set to
-EIO, there is no need to check for other error values other than
the ones currently checking for.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

This patch refactors the return value of the driver *{get, set}
functions, since the driver default error value is -EIO.

All the functions now check for TOS_FAILURE, TOS_NOT_SUPPORTED and
TOS_SUCCESS.

On TOS_FAILURE a pr_err message is printed informing the user of the
error (no change was made to this, except the check was added to the
functions not checking for this).

On TOS_NOT_SUPPORTED we now return -ENODEV immediately (some
functions were returning -EIO and some other were not checking)

On TOS_SUCCESS* we now return 0 (as a side effect, a new success value
was added, since some functions return one instead of zero to
indicate success).

As a special case, the LED functions now check for *FAILURE on
*set, and check for TOS_FAILURE and TOS_SUCCESS on *get with their
"default" return value set to LED_OFF.

Also the {lcd, video}_proc* functions were adapted to reflect these
changes to their parent HCI functions.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Currently the driver prints "*not supported" if any of the features
queried are in fact not supported, let us print the available
features instead.

This patch removes all instances pr_info printing "*not supported",
and add a new function called "print_supported_features", which will
print the available laptop features.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

This patch changes the *available functions return type from int to
void.

The checks for support of their respective features are done inside
such functions and there was no need to return anything as we can
flag the queried feature as supported inside these functions.

The code was adapted accordingly to these changes and two new
variables were created and another was changed from uint to bool.

Also, the function toshiba_acceleremoter_supported was renamed to
toshiba_accelerometer_available to maintain the naming consistency on
the driver.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

This patch adds a new function named "set_fan_status" to complement
its get* counterpart, as well as to avoid code duplication between
"fan_proc_write" and "fan_store".

Also, both functions (get*, set*) are now checking for TOS_FAILURE,
TOS_NOT_SUPPORTED and TOS_SUCCESS (to be on par with the rest of the
HCI/SCI functions), printing an error message, returning -ENODEV and
zero respectively.

The proc and sysfs functions were updated to reflect these changes as
well, returning -EIO for proc, and propagating the error value on the
sysfs functions.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

This patch changes some variables to avoid warnings from ninja-check.

We are basically moving some variables inside the conditionals where
such variables are being used, and we are checking the returned values
of some others.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

This patch simply reorders the entries found in the new keymap by
ascending order, this is simply a cosmetic change, no functionality
was modified.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Commit 2b741035 ("toshiba_acpi: Remove bluetooth rfkill code")
removed bluetooth related code, however, the wireless defines were
not removed and are unused.

This patch simply removes those defines as there is no code using
them.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

This patch changes the tr function second parameter from bool to u32,
to be on par with the rest of the TCI functions of the driver, and the
code was updated accordingly.

Also, the check for translective support was moved to the *add
function, as the {__get, set}_lcd_brightness functions make use of it.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Commit f11f999e ("toshiba_acpi: Refuse to load on machines with
buggy INFO implementations") denied loading on laptops with a WMI Event
GUID given that such laptops manage the hotkeys via that interface,
however, such laptops have a working Toshiba Configuration Interface
(TCI), and thus, such commit denied several supported features.

This patch avoids registering the input device and ignores all hotkey
events on laptops with such WMI Event GUID, making the supported
features found in those laptops to work.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

There were previous attempts to "merge" the toshiba SMM module to the
toshiba_acpi one, they were trying to imitate what the old toshiba
module does, however, some models (TOS1900 devices) come with a
"crippled" implementation and do not provide all the "features" a
"genuine" Toshiba BIOS does.

This patch adds a new device called toshiba_acpi, which aim is to
enable userspace to access the SMM on Toshiba laptops via ACPI calls.

Creating a new convenience _IOWR command to access the SCI functions
by opening/closing the SCI internally to avoid buggy BIOS, while at
the same time providing backwards compatibility.

Older programs (and new) who wish to access the SMM on newer models
can do it by pointing their path to /dev/toshiba_acpi (instead of
/dev/toshiba) as the toshiba.h header was modified to reflect these
changes as well as adds all the toshiba_acpi paths and command,
however, it is strongly recommended to use the new IOCTL for any
SCI command to avoid any buggy BIOS.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Since the introduction of TOS1900 devices support to the driver, the
"keys" entry under the proc directory was broken, given that it only
handled TOS620X devices accordingly.

This patch adapts the code to show the hotkey values of TOS1900
devices too, and in case some programs are still using that interface,
hotkeys reporting should now work on these devices.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>

Pull SCSI fixes from James Bottomley:
 "Two fairly simple fixes: one is a change that causes us to have a very
  low queue depth leading to performance issues and the other is a null
  deref occasionally in tapes thanks to use after put"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fix host max depth checking for the 'queue_depth' sysfs interface
  st: null pointer dereference panic caused by use after kref_put by st_open

Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes for 4.2.

  Things are looking quite decent at this stage but the recent work on
  the FPU support took its toll:

   - fix an incorrect overly restrictive ifdef

   - select O32 64-bit FP support for O32 binary compatibility

   - remove workarounds for Sibyte SB1250 Pass1 parts.  There are rare
     fixing the workarounds is not worth the effort.

   - patch up an outdated and now incorrect comment"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU
  MIPS: SB1: Remove support for Pass 1 parts.
  MIPS: Require O32 FP64 support for MIPS64 with O32 compat
  MIPS: asm-offset.c: Patch up various comments refering to the old filename.

Pull parisc fix from Helge Deller:
 "A memory leak fix from Christophe Jaillet which was introduced with
  kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days"

* 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: mm: Fix a memory leak related to pmd not attached to the pgd

Pull ARM SoC fixes from Olof Johansson:
 "By far most of the fixes here are updates to DTS files to deal with
  some mostly minor bugs.

  There's also a fix to deal with non-PM kernel configs on i.MX, a
  regression fix for ethernet on PXA platforms and a dependency fix for
  OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: dts: rename pcie nodes to help override status
  ARM: keystone: dts: fix dt bindings for PCIe
  ARM: pxa: fix dm9000 platform data regression
  ARM: dts: Correct audio input route & set mic bias for am335x-pepper
  ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
  MAINTAINERS: digicolor: add dts files
  ARM: ux500: fix MMC/SD card regression
  ARM: ux500: define serial port aliases
  ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
  ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
  ARM: dts: Fix frequency scaling on Gumstix Pepper
  ARM: dts: configure regulators for Gumstix Pepper
  ARM: dts: omap3: overo: Update LCD panel names
  ARM: dts: cros-ec-keyboard: Add support for some Japanese keys
  ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set
  ARM: dts: imx53-qsb: fix TVE entry
  ARM: dts: mx23: fix iio-hwmon support
  ARM: dts: imx27: Adjust the GPT compatible string
  ARM: socfpga: dts: Fix entries order
  ARM: socfpga: dts: Fix adxl34x formating and compatible string

Commit 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed
the 64-bit CPU case leading to FPU failures when requesting FR=1 mode
(which is always the case for MIPS R6 userland) when running a 32-bit
kernel on a 64-bit CPU. We also fix the MIPS R2 case.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10734/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit 0e0da48d ("parisc: mm: don't count preallocated pmds")
introduced a memory leak.

After this commit, the 'return' statement in pmd_free is executed in all
cases. Even for pmd that are not attached to the pgd.  So 'free_pages'
can never be called anymore, leading to a memory leak.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org  # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>

Merge "pxa fixes for v4.2" from Robert Jarzmik:

ARM: pxa: fixes for v4.2-rc2

This single fix reenables ethernet cards for several pxa boards,
broken by regulator addition to dm9000 driver.

* tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux:
  ARM: pxa: fix dm9000 platform data regression

Pull ARM fixes from Russell King:
 "A small set of ARM fixes for -rc3, most of them not far off
  one-liners, with the exception of fixing the V7 cache invalidation for
  incoming SMP processors which was causing problems for SoCFPGA
  devices"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: fix __virt_to_idmap build error on !MMU
  ARM: invalidate L1 before enabling coherency
  ARM: 8404/1: dma-mapping: fix off-by-one error in bitmap size check
  ARM: 8402/1: perf: Don't use of_node after putting it
  ARM: 8400/1: use virt_to_idmap to get phys_reset address

Pull x86 fixes from Ingo Molnar:
 "Two families of fixes:

   - Fix an FPU context related boot crash on newer x86 hardware with
     larger context sizes than what most people test.  To fix this
     without ugly kludges or extensive reverts we had to touch core task
     allocator, to allow x86 to determine the task size dynamically, at
     boot time.

     I've tested it on a number of x86 platforms, and I cross-built it
     to a handful of architectures:

                                        (warns)               (warns)
       testing     x86-64:  -git:  pass (    0),  -tip:  pass (    0)
       testing     x86-32:  -git:  pass (    0),  -tip:  pass (    0)
       testing        arm:  -git:  pass ( 1359),  -tip:  pass ( 1359)
       testing       cris:  -git:  pass ( 1031),  -tip:  pass ( 1031)
       testing       m32r:  -git:  pass ( 1135),  -tip:  pass ( 1135)
       testing       m68k:  -git:  pass ( 1471),  -tip:  pass ( 1471)
       testing       mips:  -git:  pass ( 1162),  -tip:  pass ( 1162)
       testing    mn10300:  -git:  pass ( 1058),  -tip:  pass ( 1058)
       testing     parisc:  -git:  pass ( 1846),  -tip:  pass ( 1846)
       testing      sparc:  -git:  pass ( 1185),  -tip:  pass ( 1185)

     ... so I hope the cross-arch impact 'none', as intended.

     (by Dave Hansen)

   - Fix various NMI handling related bugs unearthed by the big asm code
     rewrite and generally make the NMI code more robust and more
     maintainable while at it.  These changes are a bit late in the
     cycle, I hope they are still acceptable.

     (by Andy Lutomirski)"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86
  x86/fpu, sched: Dynamically allocate 'struct fpu'
  x86/entry/64, x86/nmi/64: Add CONFIG_DEBUG_ENTRY NMI testing code
  x86/nmi/64: Make the "NMI executing" variable more consistent
  x86/nmi/64: Minor asm simplification
  x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection
  x86/nmi/64: Reorder nested NMI checks
  x86/nmi/64: Improve nested NMI comments
  x86/nmi/64: Switch stacks on userspace NMI entry
  x86/nmi/64: Remove asm code that saves CR2
  x86/nmi: Enable nested do_nmi() handling for 64-bit kernels

Pull timer fix from Ingo Molnar:
 "Fix for a misplaced export that can cause build failures in certain
  (rare) Kconfig situations"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick: Move the export of tick_broadcast_oneshot_control to the proper place

Pull scheduler fix from Ingo Molnar:
 "A oneliner rq throttling fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Test list head instead of list entry in throttle_cfs_rq()

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, plus a static key fix fixing /sys/devices/cpu/rdpmc"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Really allow to specify custom CC, AR or LD
  perf auxtrace: Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
  perf hists browser: Take the --comm, --dsos, etc filters into account
  perf symbols: Store if there is a filter in place
  x86, perf: Fix static_key bug in load_mm_cr4()
  tools: Copy lib/hweight.c from the kernel sources
  perf tools: Fix the detached tarball wrt rbtree copy
  perf thread_map: Fix the sizeof() calculation for map entries
  tools lib: Improve clean target
  perf stat: Fix shadow declaration of close
  perf tools: Fix lockup using 32-bit compat vdso

Pull irq fixes from Ingo Molnar:
 "Misc irq fixes:

   - two driver fixes
   - a Xen regression fix
   - a nested irq thread crash fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gicv3-its: Fix mapping of LPIs to collections
  genirq: Prevent resend to interrupts marked IRQ_NESTED_THREAD
  genirq: Revert sparse irq locking around __cpu_up() and move it to x86 for now
  gpio/davinci: Fix race in installing chained irq handler

Merge fixes from Andrew Morton:
 "25 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (25 commits)
  lib/decompress: set the compressor name to NULL on error
  mm/cma_debug: correct size input to bitmap function
  mm/cma_debug: fix debugging alloc/free interface
  mm/page_owner: set correct gfp_mask on page_owner
  mm/page_owner: fix possible access violation
  fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
  /proc/$PID/cmdline: fixup empty ARGV case
  dma-debug: skip debug_dma_assert_idle() when disabled
  hexdump: fix for non-aligned buffers
  checkpatch: fix long line messages about patch context
  mm: clean up per architecture MM hook header files
  MAINTAINERS: uclinux-h8-devel is moderated for non-subscribers
  mailmap: update Sudeep Holla's email id
  Update Viresh Kumar's email address
  mm, meminit: suppress unused memory variable warning
  configfs: fix kernel infoleak through user-controlled format string
  include, lib: add __printf attributes to several function prototypes
  s390/hugetlb: add hugepages_supported define
  mm: hugetlb: allow hugepages_supported to be architecture specific
  revert "s390/mm: make hugepages_supported a boot time decision"
  ...

Pull btrfs fixes from Chris Mason:
 "These are all from Filipe, and cover a few problems we've had reported
  on the list recently (along with ones he found on his own)"

* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix file corruption after cloning inline extents
  Btrfs: fix order by which delayed references are run
  Btrfs: fix list transaction->pending_ordered corruption
  Btrfs: fix memory leak in the extent_same ioctl
  Btrfs: fix shrinking truncate when the no_holes feature is enabled

Pull rtc fixes from Alexandre Belloni:
 "A few fixes for the RTC susbsystem for 4.2.

  The mt6397 driver was introduce in 4.2 so it is worth fixing before
  the final release.  I though the compilation warning for armada38x was
  fixed by akpm in commit f98b733e ("rtc-armada38x.c: remove unused
  local `flags'") but he actually missed some occurrences of the
  variables.  Since I received 4 patches for that, I think we can
  include it now.

  Summary:
   - fix mt6397 wakealarm creation
   - remove a compilation warning for armada38x that was forgotten"

* tag 'rtc-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: armada38x: Remove unused variable from armada38x_rtc_set_time()
  rtc: mt6397: enable wakeup before registering rtc device

Pull device mapper fixes from Mike Snitzer:

 - revert a request-based DM core change that caused IO latency to
   increase and adversely impact both throughput and system load

 - fix for a use after free bug in DM core's device cleanup

 - a couple DM btree removal fixes (used by dm-thinp)

 - a DM thinp fix for order-5 allocation failure

 - a DM thinp fix to not degrade to read-only metadata mode when in
   out-of-data-space mode for longer than the 'no_space_timeout'

 - fix a long-standing oversight in both dm-thinp and dm-cache by now
   exporting 'needs_check' in status if it was set in metadata

 - fix an embarrassing dm-cache busy-loop that caused worker threads to
   eat cpu even if no IO was actively being issued to the cache device

* tag 'dm-4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: avoid calls to prealloc_free_structs() if possible
  dm cache: avoid preallocation if no work in writeback_some_dirty_blocks()
  dm cache: do not wake_worker() in free_migration()
  dm cache: display 'needs_check' in status if it is set
  dm thin: display 'needs_check' in status if it is set
  dm thin: stay in out-of-data-space mode once no_space_timeout expires
  dm: fix use after free crash due to incorrect cleanup sequence
  Revert "dm: only run the queue on completion if congested or no requests pending"
  dm btree: silence lockdep lock inversion in dm_btree_del()
  dm thin: allocate the cell_sort_array dynamically
  dm btree remove: fix bug in redistribute3