Pull spi fixes from Mark Brown:
 "A small collection of fixes for SPI, small mostly driver specific
  things plus a fix for module autoloading which hadn't been working
  properly for DT systems"

* tag 'spi-fix-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: cadence-quadspi: Fix check condition for DTR ops
  spi: mediatek: Fix fifo transfer
  spi: imx: mx51-ecspi: Fix CONFIGREG delay comment
  spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculation
  spi: update modalias_show after of_device_uevent_modalias support
  spi: meson-spicc: fix memory leak in meson_spicc_remove
  spi: spi-mux: Add module info needed for autoloading

Pull dmaengine fixes from Vinod Koul:
 "A bunch of driver fixes, notably:

   - idxd driver fixes for submission race, driver remove sequence,
     setup sequence for MSIXPERM, array index and updating descriptor
     vector

   - usb-dmac, pm reference leak fix

   - xilinx_dma, read-after-free fix

   - uniphier-xdmac fix for using atomic readl_poll_timeout_atomic()

   - of-dma, router_xlate to return

   - imx-dma, generic dma fix"

* tag 'dmaengine-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: imx-dma: configure the generic DMA type to make it work
  dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
  dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux ops
  dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma ops
  dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic state
  dmaengine: idxd: fix submission race window
  dmaengine: idxd: fix sequence for pci driver remove() and shutdown()
  dmaengine: idxd: fix desc->vector that isn't being updated
  dmaengine: idxd: fix setup sequence for MSIXPERM table
  dmaengine: idxd: fix array index when int_handles are being used
  dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
  dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers

Pull rdma fixes from Jason Gunthorpe:
 "Several small recent regressions - rather more than usual, but nothing
  too scary. Good to know people are testing.

   - Typo causing incorrect operation of the mlx5 mkey cache
     expiration

   - Revert a CM patch that is breaking some ULPs

   - Typo breaking SRQ in rxe

   - Revert a rxe patch breaking icrc calculation

   - Static checker warning about unbalanced locking in hns

   - Subtle cxgb4 regression from a recent atomic to refcount
     conversion"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/iw_cxgb4: Fix refcount underflow while destroying cqs.
  RDMA/hns: Fix the double unlock problem of poll_sem
  RDMA/rxe: Restore setting tot_len in the IPv4 header
  RDMA/rxe: Use the correct size of wqe when processing SRQ
  RDMA/cma: Revert INIT-INIT patch
  RDMA/mlx5: Delay emptying a cache entry when a new MR is added to it recently

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes:

   - A few regression fixes (PCM core fixes, USB-audio fixes)

   - Follow up fixes for the USB-audio mixer changes in this cycle

   - A long-standing ALSA sequencer race bug fix

   - Usual device-specific quirks for HD- and USB-audio"

* tag 'sound-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: Fix racy deletion of subscriber
  ALSA: memalloc: Fix regression with SNDRV_DMA_TYPE_CONTINUOUS
  ALSA: pcm - fix mmap capability check for the snd-dummy driver
  ALSA: usb-audio: Avoid unnecessary or invalid connector selection at resume
  ALSA: hda/realtek: add mic quirk for Acer SF314-42
  ALSA: usb-audio: Add registration quirk for JBL Quantum 600
  ALSA: hda/realtek: Fix headset mic for Acer SWIFT SF314-56 (ALC256)
  ALSA: usb-audio: Fix superfluous autosuspend recovery
  ALSA: usb-audio: fix incorrect clock source setting
  ALSA: scarlett2: Fix line out/speaker switching notifications
  ALSA: scarlett2: Correct channel mute status after mute button pressed
  ALSA: scarlett2: Fix Direct Monitor control name for 2i2
  ALSA: scarlett2: Fix Mute/Dim/MSD Mode control names

Pull drm fixes from Dave Airlie:
 "Regular weekly fixes pull, live from a Brisbane lockdown with kids at
  home.

  A big bunch of scattered amdgpu fixes, but they are all pretty small,
  minor i915 fixes, kmb, and one vmwgfx regression fixes, all pretty
  quiet for this time.

  amdgpu:
   - Fix potential out-of-bounds read when updating GPUVM mapping
   - Renoir powergating fix
   - Yellow Carp updates
   - 8K fix for navi1x
   - Beige Goby updates and new DIDs
   - Fix DMUB firmware version output
   - EDP fix
   - pmops config fix

  i915:
   - Call i915_globals_exit if pci_register_device fails
   - (follow on fix for section mismatch)
   - Correct SFC_DONE register offset

  kmb:
   - DMA fix
   - driver date/version macros

  vmwgfx:
   - Fix I/O memory access on 64-bit systems"

* tag 'drm-fixes-2021-08-06' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: add DID for beige goby
  drm/amdgpu/display: fix DMUB firmware version info
  drm/amd/display: workaround for hard hang on HPD on native DP
  drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4
  drm/amd/display: Increase stutter watermark for dcn303
  drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1X
  drm/amd/display: Assume LTTPR interop for DCN31+
  drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled
  drm/amd/pm: update yellow carp pmfw interface version
  drm/i915: fix i915_globals_exit() section mismatch error
  drm/i915: Call i915_globals_exit() if pci_register_device() fails
  drm/i915: Correct SFC_DONE register offset
  drm/vmwgfx: Fix a 64bit regression on svga3
  drm/amdgpu: fix the doorbell missing when in CGPG issue for renoir.
  drm/amdgpu: Fix out-of-bounds read when update mapping
  drm/kmb: Define driver date and major/minor version
  drm/kmb: Enable LCD DMA for low TVDDCV

Previous atomic increment/decrement logic expects the atomic count to be
'0' after the final decrement.

Replacing atomic count with refcount does not allow that, as
refcount_dec() considers count of 1 as underflow and triggers a kernel
splat.

Fix the current refcount logic by using the usual pattern of decrementing
the refcount and test if it is '0' on the final deref in
c4iw_destroy_cq(). Use wait_for_completion() instead of wait_event().

Fixes: 7183451f ("RDMA/cxgb4: Use refcount_t instead of atomic_t for reference counting")
Link: https://lore.kernel.org/r/1628167412-12114-1-git-send-email-dakshaja@chelsio.comSigned-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 'amd-drm-fixes-5.14-2021-08-05' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.14-2021-08-05:

amdgpu:
- Fix potential out-of-bounds read when updating GPUVM mapping
- Renoir powergating fix
- Yellow Carp updates
- 8K fix for navi1x
- Beige Goby updates and new DIDs
- Fix DMUB firmware version output
- EDP fix
- pmops config fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806011635.1055841-1-alexander.deucher@amd.com

Add device ids.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DMUB firmware info is printed before it gets initialized.
Correct this order to ensure true value is conveyed.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
HPD disable and enable sequences are not mutually exclusive
on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s),
part of the disable sequence (specifically, a request to SMU
to lower refclk) could come right before the call to PHY
enable, causing DMUB to access an unresponsive PHY
and thus a hard hang on the system.

[How]
Disable 48mhz refclk off on native DP.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why] On S4 resume we also need to fix detection of when to reload DMCUB
firmware because we're currently using the VBIOS version which isn't
compatible with the driver version.

[How] Update the hardware init check for DCN31 since it's the ASIC that
has this issue.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jude Shih <jude.shih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why&How]
Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent
underflow in certain modes.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Why:
In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X
by the number of pipes ODM Combined.

How:
Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the
number of pipes ODM Combined.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
For DCN31 onward, LTTPR is to be enabled and set to Transparent by
VBIOS.  Driver is to assume that VBIOS has done this without needing to
check the VBIOS interop bit.

[HOW]
Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the
interop bit to true for DCN31+.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

'pm_suspend_target_state' is only available when CONFIG_PM_SLEEP
is set/enabled. OTOH, when both SUSPEND and HIBERNATION are not set,
PM_SLEEP is not set, so this variable cannot be used.

../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: In function ‘amdgpu_acpi_is_s0ix_active’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:1046:11: error: ‘pm_suspend_target_state’ undeclared (first use in this function); did you mean ‘__KSYM_pm_suspend_target_state’?
    return pm_suspend_target_state == PM_SUSPEND_TO_IDLE;
           ^~~~~~~~~~~~~~~~~~~~~~~
           __KSYM_pm_suspend_target_state

Also use shorter IS_ENABLED(CONFIG_foo) notation for checking the
2 config symbols.

Fixes: 91e27371 ("drm/amdgpu: Check pmops for desired suspend state")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-next@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Correct yellow carp driver-PMFW interface version to v4.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from ipsec.

  Current release - regressions:

   - sched: taprio: fix init procedure to avoid inf loop when dumping

   - sctp: move the active_key update after sh_keys is added

  Current release - new code bugs:

   - sparx5: fix build with old GCC & bitmask on 32-bit targets

  Previous releases - regressions:

   - xfrm: redo the PREEMPT_RT RCU vs hash_resize_mutex deadlock fix

   - xfrm: fixes for the compat netlink attribute translator

   - phy: micrel: Fix detection of ksz87xx switch

  Previous releases - always broken:

   - gro: set inner transport header offset in tcp/udp GRO hook to avoid
     crashes when such packets reach GSO

   - vsock: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST, as required by spec

   - dsa: sja1105: fix static FDB entries on SJA1105P/Q/R/S and SJA1110

   - bridge: validate the NUD_PERMANENT bit when adding an extern_learn
     FDB entry

   - usb: lan78xx: don't modify phy_device state concurrently

   - usb: pegasus: check for errors of IO routines"

* tag 'net-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
  net: vxge: fix use-after-free in vxge_device_unregister
  net: fec: fix use-after-free in fec_drv_remove
  net: pegasus: fix uninit-value in get_interrupt_interval
  net: ethernet: ti: am65-cpsw: fix crash in am65_cpsw_port_offload_fwd_mark_update()
  bnx2x: fix an error code in bnx2x_nic_load()
  net: wwan: iosm: fix recursive lock acquire in unregister
  net: wwan: iosm: correct data protocol mask bit
  net: wwan: iosm: endianness type correction
  net: wwan: iosm: fix lkp buildbot warning
  net: usb: lan78xx: don't modify phy_device state concurrently
  docs: networking: netdevsim rules
  net: usb: pegasus: Remove the changelog and DRIVER_VERSION.
  net: usb: pegasus: Check the return value of get_geristers() and friends;
  net/prestera: Fix devlink groups leakage in error flow
  net: sched: fix lockdep_set_class() typo error for sch->seqlock
  net: dsa: qca: ar9331: reorder MDIO write sequence
  VSOCK: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST
  mptcp: drop unused rcu member in mptcp_pm_addr_entry
  net: ipv6: fix returned variable type in ip6_skb_dst_mtu
  nfp: update ethtool reporting of pauseframe control
  ...

buswidth and dtr fields in spi_mem_op are only valid when the
corresponding spi_mem_op phase has a non-zero length. For example,
SPI NAND core doesn't set buswidth when using SPI_MEM_OP_NO_ADDR
phase.

Fix the dtr checks in set_protocol() and suppports_mem_op() to
ignore empty spi_mem_op phases, as checking for dtr field in
empty phase will result in false negatives.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20210716232504.182-3-a-nandan@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to
calling lock_sock() with rw spinlock held [1].

It seems that history of this locking problem is a trial and error.

Commit b40df574 ("[PATCH] bluetooth: fix socket locking in
hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to
lock_sock() as an attempt to fix lockdep warning.

Then, commit 4ce61d1c ("[BLUETOOTH]: Fix locking in
hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to
local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the
sleep in atomic context warning.

Then, commit 4b5dd696 ("Bluetooth: Remove local_bh_disable() from
hci_sock.c") in 3.3-rc1 removed local_bh_disable().

Then, commit e305509e ("Bluetooth: use correct lock to prevent UAF
of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to
lock_sock() as an attempt to fix CVE-2021-3573.

This difficulty comes from current implementation that
hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all
references from sockets because hci_unregister_dev() immediately
reclaims resources as soon as returning from
hci_sock_dev_event(HCI_DEV_UNREG).

But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not
doing what it should do.

Therefore, instead of trying to detach sockets from device, let's accept
not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG),
by moving actual cleanup of resources from hci_unregister_dev() to
hci_cleanup_dev() which is called by bt_host_release() when all
references to this unregistered device (which is a kobject) are gone.

Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets
hci_pi(sk)->hdev, we need to check whether this device was unregistered
and return an error based on HCI_UNREGISTER flag.  There might be subtle
behavioral difference in "monitor the hdev" functionality; please report
if you found something went wrong due to this patch.

Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1]
Reported-by: syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: e305509e ("Bluetooth: use correct lock to prevent UAF of hdev object")
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull selinux fix from Paul Moore:
 "One small SELinux fix for a problem where an error code was not being
  propagated back up to userspace when a bogus SELinux policy is loaded
  into the kernel"

* tag 'selinux-pr-20210805' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: correct the return value when loads initial sids

Pull ucounts fix from Eric Biederman:
 "Fix a subtle locking versus reference counting bug in the ucount
  changes, found by syzbot"

* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Fix race condition between alloc_ucounts and put_ucounts

Pull tracing fixes from Steven Rostedt:
 "Various tracing fixes:

   - Fix NULL pointer dereference caused by an error path

   - Give histogram calculation fields a size, otherwise it breaks
     synthetic creation based on them.

   - Reject strings being used for number calculations.

   - Fix recordmcount.pl warning on llvm building RISC-V allmodconfig

   - Fix the draw_functrace.py script to handle the new trace output

   - Fix warning of smp_processor_id() in preemptible code"

* tag 'trace-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Quiet smp_processor_id() use in preemptable warning in hwlat
  scripts/tracing: fix the bug that can't parse raw_trace_func
  scripts/recordmcount.pl: Remove check_objcopy() and $can_use_local
  tracing: Reject string operand in the histogram expression
  tracing / histogram: Give calculation hist_fields a size
  tracing: Fix NULL pointer dereference in start_creating

Pull s390 fixes from Heiko Carstens:

 - fix zstd build for -march=z900 (undefined reference to __clzdi2)

 - add missing .got.plts to vdso linker scripts to fix kpatch build
   errors

 - update defconfigs

* tag 's390-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390/boot: fix zstd build for -march=z900
  s390/vdso: add .got.plt in vdso linker script

Pull kvm fixes from Paolo Bonzini:
 "Mostly bugfixes; plus, support for XMM arguments to Hyper-V hypercalls
  now obeys KVM_CAP_HYPERV_ENFORCE_CPUID.

  Both the XMM arguments feature and KVM_CAP_HYPERV_ENFORCE_CPUID are
  new in 5.14, and each did not know of the other"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit builds
  KVM: selftests: fix hyperv_clock test
  KVM: SVM: improve the code readability for ASID management
  KVM: SVM: Fix off-by-one indexing when nullifying last used SEV VMCB
  KVM: Do not leak memory for duplicate debugfs directories
  KVM: selftests: Test access to XMM fast hypercalls
  KVM: x86: hyper-v: Check if guest is allowed to use XMM registers for hypercall input
  KVM: x86: Introduce trace_kvm_hv_hypercall_done()
  KVM: x86: hyper-v: Check access to hypercall before reading XMM registers
  KVM: x86: accept userspace interrupt only if no event is injected

Pull pcmcia fix from Dominik Brodowski:
 "Zheyu Ma found and fixed a null pointer dereference bug in the device
  driver for the i82092 card reader"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: i82092: fix a null pointer dereference bug

This program always prints 4096 and hangs before the patch, and always
prints 8192 and exits successfully after:

  int main()
  {
      int pipefd[2];
      for (int i = 0; i < 1025; i++)
          if (pipe(pipefd) == -1)
              return 1;
      size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ);
      printf("%zd\n", bufsz);
      char *buf = calloc(bufsz, 1);
      write(pipefd[1], buf, bufsz);
      read(pipefd[0], buf, bufsz-1);
      write(pipefd[1], buf, 1);
  }

Note that you may need to increase your RLIMIT_NOFILE before running the
program.

Fixes: 759c0114 ("pipe: limit the per-user amount of pages allocated in pipes")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/
Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pavel Skripkin says:

====================
net: fix use-after-free bugs

I've added new checker to smatch yesterday. It warns about using
netdev_priv() pointer after free_{netdev,candev}() call. I hope, it will
get into next smatch release.

Some of the reported bugs are fixed and upstreamed already, but Dan ran new
smatch with allmodconfig and found 2 more. Big thanks to Dan for doing it,
because I totally forgot to do it.
====================

Link: https://lore.kernel.org/r/cover.1628091954.git.paskripkin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Smatch says:
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);

Since vdev pointer is netdev private data accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function

Fixes: 6cca2003 ("vxge: cleanup probe error paths")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Smatch says:
	drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);
	drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);

Since fep pointer is netdev private data, accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: a31eda65 ("net: fec: fix clock count mis-match")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Syzbot reported uninit value pegasus_probe(). The problem was in missing
error handling.

get_interrupt_interval() internally calls read_eprom_word() which can
fail in some cases. For example: failed to receive usb control message.
These cases should be handled to prevent uninit value bug, since
read_eprom_word() will not initialize passed stack variable in case of
internal failure.

Fail log:

BUG: KMSAN: uninit-value in get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline]
BUG: KMSAN: uninit-value in pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152
CPU: 1 PID: 825 Comm: kworker/1:1 Not tainted 5.12.0-rc6-syzkaller #0
...
Workqueue: usb_hub_wq hub_event
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x24c/0x2e0 lib/dump_stack.c:120
 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x5c/0xa0 mm/kmsan/kmsan_instr.c:197
 get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline]
 pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152
....

Local variable ----data.i@pegasus_probe created at:
 get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline]
 pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152
 get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline]
 pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152

Reported-and-tested-by: syzbot+02c9f70f3afae308464a@syzkaller.appspotmail.com
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210804143005.439-1-paskripkin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The hardware latency detector (hwlat) has a mode that it runs one thread
across CPUs. The logic to move from the currently running CPU to the next
one in the list does a smp_processor_id() to find where it currently is.
Unfortunately, it's done with preemption enabled, and this triggers a
warning for using smp_processor_id() in a preempt enabled section.

As it is only using smp_processor_id() to get information on where it
currently is in order to simply move it to the next CPU, it doesn't really
care if it got moved in the mean time. It will simply balance out later if
such a case arises.

Switch smp_processor_id() to raw_smp_processor_id() to quiet that warning.

Link: https://lkml.kernel.org/r/20210804141848.79edadc0@oasis.local.homeAcked-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Fixes: 8fa826b7 ("trace/hwlat: Implement the mode config option")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The am65_cpsw_port_offload_fwd_mark_update() causes NULL exception crash
when there is at least one disabled port and any other port added to the
bridge first time.

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000858
pc : am65_cpsw_port_offload_fwd_mark_update+0x54/0x68
lr : am65_cpsw_netdevice_event+0x8c/0xf0
Call trace:
am65_cpsw_port_offload_fwd_mark_update+0x54/0x68
notifier_call_chain+0x54/0x98
raw_notifier_call_chain+0x14/0x20
call_netdevice_notifiers_info+0x34/0x78
__netdev_upper_dev_link+0x1c8/0x290
netdev_master_upper_dev_link+0x1c/0x28
br_add_if+0x3f0/0x6d0 [bridge]

Fix it by adding proper check for port->ndev != NULL.

Fixes: 2934db9b ("net: ti: am65-cpsw-nuss: Add netdevice notifiers")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the error code if bnx2x_alloc_fw_stats_mem() fails.  The current
code returns success.

Fixes: ad5afc89 ("bnx2x: Separate VF and PF logic")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

M Chetan Kumar says:

====================
net: wwan: iosm: fixes

This patch series contains IOSM Driver fixes. Below is the patch
series breakdown.

PATCH1:
* Correct the td buffer type casting & format specifier to fix lkp buildbot
warning.

PATCH2:
* Endianness type correction for nr_of_bytes. This field is exchanged
as part of host-device protocol communication.

PATCH3:
* Correct ul/dl data protocol mask bit to know which protocol capability
does device implement.

PATCH4:
* Calling unregister_netdevice() inside wwan del link is trying to
acquire the held lock in ndo_stop_cb(). Instead, queue net dev to
be unregistered later.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Calling unregister_netdevice() inside wwan del link is trying to
acquire the held lock in ndo_stop_cb(). Instead, queue net dev to
be unregistered later.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct ul/dl data protocol mask bit to know which protocol capability
does device implement.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Endianness type correction for nr_of_bytes. This field is exchanged
as part of host-device protocol communication.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct td buffer type casting & format specifier to fix lkp buildbot
warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Take a signed 'long' instead of an 'unsigned long' for the number of
pages to add/subtract to the total number of pages used by the MMU.  This
fixes a zero-extension bug on 32-bit kernels that effectively corrupts
the per-cpu counter used by the shrinker.

Per-cpu counters take a signed 64-bit value on both 32-bit and 64-bit
kernels, whereas kvm_mod_used_mmu_pages() takes an unsigned long and thus
an unsigned 32-bit value on 32-bit kernels.  As a result, the value used
to adjust the per-cpu counter is zero-extended (unsigned -> signed), not
sign-extended (signed -> signed), and so KVM's intended -1 gets morphed to
4294967295 and effectively corrupts the counter.

This was found by a staggering amount of sheer dumb luck when running
kvm-unit-tests on a 32-bit KVM build.  The shrinker just happened to kick
in while running tests and do_shrink_slab() logged an error about trying
to free a negative number of objects.  The truly lucky part is that the
kernel just happened to be a slightly stale build, as the shrinker no
longer yells about negative objects as of commit 18bb473e ("mm:
vmscan: shrink deferred objects proportional to priority").

 vmscan: shrink_slab: mmu_shrink_scan+0x0/0x210 [kvm] negative objects to delete nr=-858993460

Fixes: bc8a3d89 ("kvm: mmu: Fix overflow on kvm mmu page limit calculation")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210804214609.1096003-1-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Since commit 77271ce4 ("tracing: Add irq, preempt-count and need resched info
to default trace output"), the default trace output format has been changed to:
          <idle>-0       [009] d.h. 22420.068695: _raw_spin_lock_irqsave <-hrtimer_interrupt
          <idle>-0       [000] ..s. 22420.068695: _nohz_idle_balance <-run_rebalance_domains
          <idle>-0       [011] d.h. 22420.068695: account_process_tick <-update_process_times

origin trace output format:(before v3.2.0)
     # tracer: nop
     #
     #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
     #              | |       |          |         |
          migration/0-6     [000]    50.025810: rcu_note_context_switch <-__schedule
          migration/0-6     [000]    50.025812: trace_rcu_utilization <-rcu_note_context_switch
          migration/0-6     [000]    50.025813: rcu_sched_qs <-rcu_note_context_switch
          migration/0-6     [000]    50.025815: rcu_preempt_qs <-rcu_note_context_switch
          migration/0-6     [000]    50.025817: trace_rcu_utilization <-rcu_note_context_switch
          migration/0-6     [000]    50.025818: debug_lockdep_rcu_enabled <-__schedule
          migration/0-6     [000]    50.025820: debug_lockdep_rcu_enabled <-__schedule

The draw_functrace.py(introduced in v2.6.28) can't parse the new version format trace_func,
So we need modify draw_functrace.py to adapt the new version trace output format.

Link: https://lkml.kernel.org/r/20210611022107.608787-1-suhui@zeku.com

Cc: stable@vger.kernel.org
Fixes: 77271ce4 tracing: Add irq, preempt-count and need resched info to default trace output
Signed-off-by: Hui Su <suhui@zeku.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>