- 05 Jun, 2020 40 commits
-
-
OGAWA Hirofumi authored
Current readahead for FAT entries is very simple but is having some flaws, so it is not working well for some environments. This patch improves the readahead more or less. The key points of modification are, - make the readahead size tunable by using bdi->ra_pages - care the bdi->io_pages to avoid the small size I/O request - update readahead window before fully exhausting With this patch, on slow USB connected 2TB hdd: [before] 383.18sec [after] 51.03sec Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
hyeongseok.kim <hyeongseok.kim@lge.com> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
OGAWA Hirofumi authored
If FAT length == 0, the image doesn't have any data. And it can be the cause of overlapping the root dir and FAT entries. Also Windows treats it as invalid format. Reported-by: syzbot+6f1624f937d9d6911e2d@syzkaller.appspotmail.com Signed-off-by:
-
Chris Down authored
Some init systems (eg. systemd) have init at their own paths, for example, /usr/lib/systemd/systemd. A compatibility symlink to one of the hardcoded init paths is provided by another package, usually named something like systemd-sysvcompat or similar. Currently distro maintainers who are hands-off on the bootloader are more or less required to include those compatibility links as part of their base distribution, because it's hard to migrate away from them since there's a risk some users will not get the message to set init= on the kernel command line appropriately. Moreover, for distributions where the init system is something the distribution itself is opinionated about (eg. Arch, which has systemd in the required `base` package), we could usually reasonably configure this ahead of time when building the distribution kernel. However, we currently simply don't have any way to configure the kernel to do this. Here's an example discussion where removing sysvcompat was discussed by distro maintainers[0]. This patch adds a new Kconfig tunable, CONFIG_DEFAULT_INIT, which if set is tried before the hardcoded fallback list. So the order of precedence is now thus: 1. init= on command line (on failure: panic) 2. CONFIG_DEFAULT_INIT (on failure: try #3) 3. Hardcoded fallback list (on failure: panic) This new config parameter will allow distribution maintainers to move away from these compatibility links safely, without having to worry that their users might not have the right init=. There are also two other benefits of this over having the distribution maintain a symlink: 1. One of the value propositions over simply having distributions maintain a /sbin/init symlink via a package is that it also frees distributions which have a preferred default, but not mandatory, init system from having their package manager fight with their users for control of /{s,}bin/init. Instead, the distribution simply makes their preference known in CONFIG_DEFAULT_INIT, and if the user installs another init system and uninstalls the default one they can still make use of /{s,}bin/init and friends for their own uses. This makes more cases Just Work(tm) without the user having to perform extra configuration via init=. 2. Since before this we don't know which path the distribution actually _intends_ to serve init from, we don't pr_err if it is simply missing, and usually will just silently put the user in a /bin/sh shell. Now that the distribution can make a declaration of intent, we can be more vocal when this init system fails to launch for any reason, even if it's simply because no file exists at that location, speeding up the palaver of init/mount dependency/etc debugging a bit. [0]: https://lists.archlinux.org/pipermail/arch-dev-public/2019-January/029435.htmlSigned-off-by:Chris Down <chris@chrisdown.name> Signed-off-by:
-
Nick Desaulniers authored
ELFNOTE_START allows callers to specify flags for .pushsection assembler directives. All callsites but ELF_NOTE use "a" for SHF_ALLOC. For vdso's that explicitly use ELF_NOTE_START and BUILD_SALT, the same section is specified twice after preprocessing, once with "a" flag, once without. Example: .pushsection .note.Linux, "a", @note ; .pushsection .note.Linux, "", @note ; While GNU as allows this ordering, it warns for the opposite ordering, making these directives position dependent. We'd prefer not to precisely match this behavior in Clang's integrated assembler. Instead, the non __ASSEMBLY__ definition of ELF_NOTE uses __attribute__((section(".note.Linux"))) which is created with SHF_ALLOC, so let's make the __ASSEMBLY__ definition of ELF_NOTE consistent with C and just always use "a" flag. This allows Clang to assemble a working mainline (5.6) kernel via: $ make CC=clang AS=clang Signed-off-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Fangrui Song <maskray@google.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/913 Link: http://lkml.kernel.org/r/20200325231250.99205-1-ndesaulniers@google.comDebugged-by:
Ilie Halip <ilie.halip@gmail.com> Signed-off-by:
-
Anthony Iliopoulos authored
The ifndef was added a long time ago to support archs that would define their own mapping function. The last user was the metag arch which was removed from the tree, and as such there are no users left. Let's kill it. Signed-off-by:
Anthony Iliopoulos <ailiop@suse.com> Signed-off-by:
-
Geert Uytterhoeven authored
While "git am" can apply an mbox file containing multiple patches (e.g. as created by b4[1], or a patch bundle downloaded from patchwork), checkpatch does not have proper support for that. When operating on an mbox, checkpatch will merge all detected tags, and complain falsely about duplicates: WARNING: Duplicate signature As modifying checkpatch to reset state in between each patch is a lot of work, a simple solution is splitting the mbox into individual patches, and invoking checkpatch for each of them. Fortunately checkpatch can read a patch from stdin, so the classic "formail" tool can be used to split the mbox, and pipe all individual patches to checkpatch: formail -s scripts/checkpatch.pl < my-mbox However, when reading a patch file from standard input, checkpatch calls it "Your patch", and reports its state as: Your patch has style problems, please review. or: Your patch has no obvious style problems and is ready for submission. Hence it can be difficult to identify which patches need to be reviewed and improved. Fix this by replacing "Your patch" by (the first line of) the email subject, if present. Note that "git mailsplit" can also be used to split an mbox, but it will create individual files for each patch, thus requiring cleanup afterwards. Formail does not have this disadvantage. [1] https://git.kernel.org/pub/scm/utils/b4/b4.git [joe@perches.com: reduce cpu usage] Link: http://lkml.kernel.org/r/c9d89bb24c7414142414c60371e210fdcf4617d2.camel@perches.comSigned-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Joe Perches authored
Don't allow these options to be combined. Miscellanea: o Add missing $P: to some die("reason message") output Signed-off-by:Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Some checks look for comments around a specific function like read_barrier_depends. Extend the check to support both c89 and c90 comment styles. c89 /* comment */ or c99 // comment For c99 comments, only look a 3 single lines, the line being scanned, the line above and the line below the line being scanned rather than the patch diff context. Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/65cb075435d2f385a53c77571b491b2b09faaf8e.camel@perches.comSigned-off-by:
-
Joe Perches authored
There is a preferred order for the entries in MAINTAINERS sections. See commits 3b50142d ("MAINTAINERS: sort field names for all entries") and 6680125e ("MAINTAINERS: list the section entries in the preferred order") Add checkpatch tests to try to keep that ordering. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: http://lkml.kernel.org/r/17677130b3ca62d79817e6a22546bad39d7e81b4.camel@perches.comSigned-off-by:
-
Arnd Bergmann authored
Clang normally does not warn about certain issues in inline functions when it only happens in an eliminated code path. However if something else goes wrong, it does tend to complain about the definition of hweight_long() on 32-bit targets: include/linux/bitops.h:75:41: error: shift count >= width of type [-Werror,-Wshift-count-overflow] return sizeof(w) == 4 ? hweight32(w) : hweight64(w); ^~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:29:49: note: expanded from macro 'hweight64' define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w)) ^~~~~~~~~~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:21:76: note: expanded from macro '__const_hweight64' define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32)) ^ ~~ include/asm-generic/bitops/const_hweight.h:20:49: note: expanded from macro '__const_hweight32' define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16)) ^ include/asm-generic/bitops/const_hweight.h:19:72: note: expanded from macro '__const_hweight16' define __const_hweight16(w) (__const_hweight8(w) + __const_hweight8((w) >> 8 )) ^ include/asm-generic/bitops/const_hweight.h:12:9: note: expanded from macro '__const_hweight8' (!!((w) & (1ULL << 2))) + \ Adding an explicit cast to __u64 avoids that warning and makes it easier to read other output. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lkml.kernel.org/r/20200505135513.65265-1-arnd@arndb.deSigned-off-by:
-
Jesse Brandeburg authored
Test some bit clears/sets to make sure assembly doesn't change, and that the set_bit and clear_bit functions work and don't cause sparse warnings. Instruct Kbuild to build this file with extra warning level -Wextra, to catch new issues, and also doesn't hurt to build with C=1. This was used to test changes to arch/x86/include/asm/bitops.h. In particular, sparse (C=1) was very concerned when the last bit before a natural boundary, like 7, or 31, was being tested, as this causes sign extension (0xffffff7f) for instance when clearing bit 7. Recommended usage: make defconfig scripts/config -m CONFIG_TEST_BITOPS make modules_prepare make C=1 W=1 lib/test_bitops.ko objdump -S -d lib/test_bitops.ko insmod lib/test_bitops.ko rmmod lib/test_bitops.ko <check dmesg>, there should be no compiler/sparse warnings and no error messages in log. Link: http://lkml.kernel.org/r/20200310221747.2848474-2-jesse.brandeburg@intel.comSigned-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> CcL Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Tan Hu authored
If the given type has fraction smaller than max_frac/FPROP_FRAC_BASE, the code could be modified to call __fprop_inc_percpu() directly and easier to understand. After this patch, fprop_reflect_period_percpu() will be called twice, and quicky return on pl->period == p->period test, so it would not result to significant downside of performance. Thanks for Jan's guidance. Signed-off-by:
Tan Hu <tan.hu@zte.com.cn> Signed-off-by:
Jan Kara <jack@suse.cz> Cc: <xue.zhihong@zte.com.cn> Cc: Yi Wang <wang.yi59@zte.com.cn> Cc: <wang.liang82@zte.com.cn> Link: http://lkml.kernel.org/r/1589004753-27554-1-git-send-email-tan.hu@zte.com.cnSigned-off-by:
-
Joe Perches authored
Remove the trailing newline from the used-once pr_fmt and add it to the single use of pr_<level> in this code to use a more common logging style. Miscellanea: o Use %lu in the pr_debug format and remove the unnecessary cast Signed-off-by:
-
Jann Horn authored
The zlib inflate code has an old micro-optimization based on the assumption that for pre-increment memory accesses, the compiler will generate code that fits better into the processor's pipeline than what would be generated for post-increment memory accesses. This optimization was already removed in upstream zlib in 2016: https://github.com/madler/zlib/commit/9aaec95e8211 This optimization causes UB according to C99, which says in section 6.5.6 "Additive operators": "If both the pointer operand and the result point to elements of the same array object, or one past the last element of the array object, the evaluation shall not produce an overflow; otherwise, the behavior is undefined". This UB is not only a theoretical concern, but can also cause trouble for future work on compiler-based sanitizers. According to the zlib commit, this optimization also is not optimal anymore with modern compilers. Replace uses of OFF, PUP and UP_UNALIGNED with their definitions in the POSTINC case, and remove the macro definitions, just like in the upstream patch. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Jason Yan authored
Fix the following sparse warning: lib/test_lockup.c:145:14: warning: symbol 'test_inode' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
KP Singh authored
When updating a piece of broken logic from using get_user to strncpy_from_user, we noticed that a warning which is expected when calling a function that might fault from an atomic context with pagefaults enabled disappeared. Not having this warning in place can lead to calling strncpy_from_user from an atomic context and eventually kernel crashes/stack corruption. Signed-off-by:
KP Singh <kpsingh@google.com> Signed-off-by:
-
Christophe JAILLET authored
pr_xxx() functions usually have a newline at the end of the logging message. Here, this newline is added via the 'pr_fmt' macro. In order to be more consistent with other files, use a more standard convention and put these newlines back in the messages themselves and remove it from the pr_fmt macro. While at it, use __func__ instead of hardcoding a function name in the last message. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200409163234.22830-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Joe Perches authored
get_maintainer behaves differently if there is a double sequential forward slash in a filename because the total number of slashes in a filename is used to match MAINTAINERS file patterns. For example: (with double slash) $ ./scripts/get_maintainer.pl -f drivers/gpu/drm//lima David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS) Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS,commit_signer:3/42=7%) Qiang Yu <yuq825@gmail.com> (commit_signer:36/42=86%,authored:24/42=57%) Vasily Khoruzhick <anarsoul@gmail.com> (commit_signer:26/42=62%) Krzysztof Kozlowski <krzk@kernel.org> (commit_signer:5/42=12%,authored:5/42=12%) Emil Velikov <emil.velikov@collabora.com> (commit_signer:4/42=10%) dri-devel@lists.freedesktop.org (open list:DRM DRIVERS) linux-kernel@vger.kernel.org (open list) (without double slash) $ ./scripts/get_maintainer.pl -f drivers/gpu/drm/lima Qiang Yu <yuq825@gmail.com> (maintainer:DRM DRIVERS FOR LIMA) David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS) Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS) dri-devel@lists.freedesktop.org (open list:DRM DRIVERS FOR LIMA) lima@lists.freedesktop.org (moderated list:DRM DRIVERS FOR LIMA) linux-kernel@vger.kernel.org (open list) So reduce consecutive double slashes to a single slash by using File::Spec->canonpath(). from: https://perldoc.perl.org/File/Spec/Unix.html canonpath() No physical check on the filesystem, but a logical cleanup of a path. On UNIX eliminates successive slashes and successive "/.". Reported-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Joe Perches authored
.yaml files can contain maintainer/author addresses and it seems unlikely or unnecessary that individual MAINTAINER file section entries for each .yaml file will be created. So add the email addresses found in .yaml files to the default get_maintainer output. The email addresses are marked with "(in file)" when using the "--roles" or "--rolestats" options. Miscellanea: o Change $file_emails to $email_file_emails to avoid visual naming conflicts with @file_emails Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Jason Yan authored
Fix the following sparse warning: kernel/user.c:85:19: warning: symbol 'uidhash_table' was not declared. Should it be static? Reported-by:
-
Alexey Dobriyan authored
"catch" is reserved keyword in C++, rename it to something both gcc and g++ accept. Rename "ign" for symmetry. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
Instead of keeping NULL terminated array switch to use ARRAY_SIZE() which helps to further clean up. Signed-off-by:
Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: http://lkml.kernel.org/r/20200508100758.51644-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: include/linux/mm.h:1371:8-9: WARNING: return of 0/1 in function 'cpupid_pid_unset' with return type bool Signed-off-by:
-
Zou Wei authored
Fixes coccicheck warnings: mm/zbud.c:246:1-20: WARNING: Assignment of 0/1 to bool variable mm/mremap.c:777:2-8: WARNING: Assignment of 0/1 to bool variable mm/huge_memory.c:525:9-10: WARNING: return of 0/1 in function 'is_transparent_hugepage' with return type bool Reported-by:
Zou Wei <zou_wei@huawei.com> Signed-off-by:
-
Ethon Paul authored
There is a comment in typo, fix it. Signed-off-by:
Ethon Paul <ethp@qq.com> Signed-off-by:
-
Ethon Paul authored
There is a typo in comment, fix it. Signed-off-by:
-
Ethon Paul authored
There is a typo in comment, fix it. Signed-off-by:
-
Ethon Paul authored
There is a typo in comment, fix it. Signed-off-by:
David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/20200411002247.14468-1-ethp@qq.comSigned-off-by:
-
Ethon Paul authored
There is a typo in comment, fix it. Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Link: http://lkml.kernel.org/r/20200411064723.15855-1-ethp@qq.comSigned-off-by:
-
Ethon Paul authored
There are some typos in comment, fix them. s/responsiblity/responsibility s/oflline/offline Signed-off-by:
-
Ethon Paul authored
There are some typos in comment, fix them. s/Fortunatly/Fortunately s/taked/taken s/necessory/necessary s/shink/shrink Signed-off-by:
-
Ethon Paul authored
There is a typo in comment, fix it. Signed-off-by:
-
Ethon Paul authored
There is a typo in comment, fix it. Signed-off-by:
-
Ethon Paul authored
There is a typo in commet, fix it. Signed-off-by:
-
Ethon Paul authored
There is a typo in comment, fix it. Signed-off-by:
-
Ethon Paul authored
There are some typos, fix them. s/regsitration/registration s/santity/sanity s/decremeting/decrementing Signed-off-by:
-
Ethon Paul authored
[akpm@linux-foundation.org: coding style fixes] Signed-off-by:
-
Ethon Paul authored
There is a typo in comment, fix it. Signed-off-by:
-
Ethon Paul authored
There is a typo in comment, fix it. Signed-off-by:
-
Ethon Paul authored
There is a typo in comment, fix it. s/recoreded/recorded Signed-off-by:
-
