Because of the requirement for total distribution transparency, users
send subscriptions and receive topology events in their own host format.
It is up to the topology server to determine this format and do the
correct conversions to and from its own host format when needed.

Until now, this has been handled in a rather non-transparent way inside
the topology server and subscriber code, leading to unnecessary
complexity when creating subscriptions and issuing events.

We now improve this situation by adding two new macros, tipc_sub_read()
and tipc_evt_write(). Both those functions calculate the need for
conversion internally before performing their respective operations.
Hence, all handling of such conversions become transparent to the rest
of the code.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The message transmission and reception in the topology server is more
generic than is currently necessary. By basing the funtionality on the
fact that we only send items of type struct tipc_event and always
receive items of struct tipc_subcr we can make several simplifications,
and also get rid of some unnecessary dynamic memory allocations.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is unnecessary to keep two structures, struct tipc_conn and struct
tipc_subscriber, with a one-to-one relationship and still with different
life cycles. The fact that the two often run in different contexts, and
still may access each other via direct pointers constitutes an additional
hazard, something we have experienced at several occasions, and still
see happening.

We have identified at least two remaining problems that are easier to
fix if we simplify the topology server data structure somewhat.

- When there is a race between a subscription up/down event and a
  timeout event, it is fully possible that the former might be delivered
  after the latter, leading to confusion for the receiver.

- The function tipc_subcrp_timeout() is executing in interrupt context,
  while the following call chain is at least theoretically possible:
  tipc_subscrp_timeout()
    tipc_subscrp_send_event()
      tipc_conn_sendmsg()
        conn_put()
          tipc_conn_kref_release()
            sock_release(sock)

I.e., we end up calling a function that might try to sleep in
interrupt context. To eliminate this, we need to ensure that the
tipc_conn structure and the socket, as well as the subscription
instances, only are deleted in work queue context, i.e., after the
timeout event really has been sent out.

We now remove this unnecessary complexity, by merging data and
functionality of the subscriber structure into struct tipc_conn
and the associated file server.c. We thereafter add a spinlock and
a new 'inactive' state to the subscription structure. Using those,
both problems described above can be easily solved.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Interaction between the functionality in server.c and subscr.c is
done via function pointers installed in struct server. This makes
the code harder to follow, and doesn't serve any obvious purpose.

Here, we replace the function pointers with direct function calls.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The socket handling in the topology server is unnecessarily generic.
It is prepared to handle both SOCK_RDM, SOCK_DGRAM and SOCK_STREAM
type sockets, as well as the only socket type which is really used,
SOCK_SEQPACKET.

We now remove this redundant code to make the code more readable.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2018-02-15

Here's the first bluetooth-next pull request targetting the 4.17 kernel
release.

 - Fixes & cleanups to Atheros and Marvell drivers
 - Support for two new Realtek controllers
 - Support for new Intel Bluetooth controller
 - Fix for supporting multiple slave-role Bluetooth LE connections
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

eBPF test fails due to verifier failure because log_buf is too small.
Fixed by increasing log_buf size
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove rt_table_id from rtable. It was added for getroute to return the
table id that was hit in the lookup. With the changes for fibmatch the
table id can be extracted from the fib_info returned in the fib_result
so it no longer needs to be in rtable directly.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Brenda J. Butler says:

====================
tools: tc-testing: Plugin Architecture

To make tdc.py more general, we are introducing a plugin architecture.

This patch set first organizes the command line parameters, then
introduces the plugin architecture and some example plugins.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Run the command under test under valgrind.  Produce an extra set of
tap output for the memory check on each test.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the functionality of creating a namespace before the test suite
and destroying it afterwards to a plugin.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the functionality that checks for root permissions into a plugin.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This should be a general test architecture, and yet allow specific
tests to be done.  Introduce a plugin architecture.

An individual test has 4 stages, setup/execute/verify/teardown.  Each
plugin gets a chance to run a function at each stage, plus one call
before all the tests are called ("pre" suite) and one after all the
tests are called ("post" suite).  In addition, just before each
command is executed, the plugin gets a chance to modify the command
using the "adjust_command" hook.  This makes the test suite quite
flexible.

Future patches will take some functionality out of the tdc.py script and
place it in plugins.

To use the plugins, place the implementation in the plugins directory
and run tdc.py.  It will notice the plugins and use them.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Split the test_runner function into the loop part (test_runner)
and the contents (run_one_test) for maintainability.
It makes it a little easier to catch exceptions
in an individual test, and keep going (and flush a bunch
of tap results for the skipped tests).
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Separate the functionality of the command line parameters into "selection"
parameters, "action" parameters and other parameters.

"Selection" parameters are for choosing which tests on which to act.
"Action" parameters are for choosing what to do with the selected tests.
"Other" parameters are for global effect (like "help" or "verbose").

With this commit, we add the ability to name a directory as another
selection mechanism.  We can accumulate a number of tests by directory,
file, category, or even by test id, instead of being constrained to
run all tests in one collection or just one test.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kirill Tkhai says:

====================
net: Add ioctl() SIOCGSKNS cmd to allow obtaining net ns of tun device

Currently, it's not possible to get or check net namespace,
which was used to create tun socket. User may have two tun
devices with the same names in different nets, and there
is no way to differ them each other.

The patchset adds support for ioctl() cmd SIOCGSKNS for tun
devices. It will allow people to obtain net namespace file
descriptor like we allow to do that for sockets in general.

v2: Add new patch [2/3] to export open_related_ns().
====================
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds possibility to get tun device's net namespace fd
in the same way we allow to do that for sockets.

Socket ioctl numbers do not intersect with tun-specific, and there
is already SIOCSIFHWADDR used in tun code. So, SIOCGSKNS number
is choosen instead of custom-made for this functionality.

Note, that open_related_ns() uses plain get_net_ns() and it's safe
(net can't be already dead at this moment):

  tun socket is allocated via sk_alloc() with zero last arg (kern = 0).
  So, each alive socket increments net::count, and the socket is definitely
  alive during ioctl syscall.

Also, common variable net is introduced, so small cleanup in TUNSETIFF
is made.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function will be used to obtain net of tun device.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function will be used to obtain net of tun device.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-02-14

This patch series enables the new mqprio hardware offload mechanism
creating traffic classes on VFs for XL710 devices. The parameters
needed to configure these traffic classes/queue channels are provides
by the user via the tc tool. A maximum of four traffic classes can be
created on each VF. This patch series also enables application of cloud
filters to each of these traffic classes. The cloud filters are applied
using the tc-flower classifier.

Example:
    1. tc qdisc add dev vf0 root mqprio num_tc 4 map 0 0 0 0 1 2 2 3\
        queues 2@0 2@2 1@4 1@5 hw 1 mode channel
    2. tc qdisc add dev vf0 ingress
    3. ethtool -K vf0 hw-tc-offload on
    4. ip link set eth0 vf 0 spoofchk off
    5. tc filter add dev vf0 protocol ip parent ffff: prio 1 flower dst_ip\
        192.168.3.5/32 ip_proto udp dst_port 25 skip_sw hw_tc 2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In kcm_attach strp_done is called when sk_user_data is already
set to fail the attach. strp_done needs the strp to be stopped and
warns if it isn't. Call strp_stop in this case to eliminate the
warning message.

Reported-by: syzbot+88dfb55e4c8b770d86e3@syzkaller.appspotmail.com
Fixes: e5571240 ("kcm: Check if sk_user_data already set in kcm_attach"
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add documentation of ti,clk-output-sel which can be used to select
a specific clock for CLK_OUT.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The DP83867 has a muxing option for the CLK_OUT pin. It is possible
to set CLK_OUT for different channels.
Create a binding to select a specific clock for CLK_OUT pin.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the default link tolerance set in struct tipc_bearer only
has effect on links going up after that moment. I.e., a user has to
reset all the node's links across that bearer to have the new value
applied. This is too limiting and disturbing on a running cluster to
be useful.

We now change this so that also already existing links are updated
dynamically, without any need for a reset, when the bearer value is
changed. We leverage the already existing per-link functionality
for this to achieve the wanted effect.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rahul Lakkireddy says:

====================
cxgb4: speed up reading on-chip memory

This series of patches speed up reading on-chip memory (EDC and MC)
by reading 64-bits at a time.

Patch 1 reworks logic to read EDC and MC.

Patch 2 adds logic to read EDC and MC 64-bits at a time.

v2:
- Dropped AVX CPU intrinsic instructions.
- Use readq() to read 64-bits at a time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use readq() (via t4_read_reg64()) to read 64-bits at a time.
Read residual in 32-bit multiples.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rework logic to read EDC and MC. Do 32-bit reads at a time.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv4 uses set_lwt_redirect to set the lwtunnel redirect functions as
needed. Move it to lwtunnel.h as lwtunnel_set_redirect and change
IPv6 to also use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
PTP support for DSA and mv88e6xxx driver.

This patchset adds support for using the PTP hardware in switches
supported by the mv88e6xxx driver. The code was produces in
collaboration with Brandon Streiff doing the initial implementation,
and then Richard Cochran and Andrew Lunn making further changes and
cleanups.

The code is sufficient to use ptp4l on a single DSA interface, either
as a master or a slave. Due to the use of an MDIO bus to access the
switch, reading hardware timestamps is slower than what ptp4l
expects. Thus it is necessary to use the option
--tx_timestamp_timeout=32. Heavy use of ethtool -S, or bridge fdb show
can also upset ptp4l. Patches to address this will follow.

Further work is requires to support bridges using Boundary Clock or
Transparent Clock mode.

Since the RFC, an overflow bug has been fixed. Brandon Streiff
has also Acked-by: the updates to his initial patchset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

88E6341 devices default to timestamping at the PHY, but due to a
hardware issue, timestamps via this component are unreliable. For
this family, configure the PTP hardware to force the timestamping
to occur at the MAC.
Signed-off-by: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch implements RX/TX timestamping support.

The Marvell PTP hardware supports RX timestamping individual message
types, but for simplicity we only support the EVENT receive filter since
few if any clients bother with the more specific filter types.

checkpatch and reverse Christmas tree changes by Andrew Lunn.

Re-factor duplicated code paths and avoid IfOk anti-pattern, use the
common ptp worker thread from the class layer and time stamp UDP/IPv4
frames as well as Layer-2 frame by Richard Cochran.
Signed-off-by: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Forward the rx/tx timestamp machinery from the dsa infrastructure to the
switch driver.

On the rx side, defer delivery of skbs until we have an rx timestamp.
This mimicks the behavior of skb_defer_rx_timestamp.

On the tx side, identify PTP packets, clone them, and pass them to the
underlying switch driver before we transmit. This mimicks the behavior
of skb_tx_timestamp.

Adjusted txstamp API to keep the allocation and freeing of the clone
in the same central function by Richard Cochran
Signed-off-by: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support to the dsa slave network device so that
switch drivers can implement the SIOC[GS]HWTSTAMP ioctls and the
ethtool timestamp-info interface.
Signed-off-by: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for configuring mv88e6xxx GPIO lines as PTP
pins, so that they may be used for time stamping external events or for
periodic output.

Checkpatch and reverse Christmas tree fixes by Andrew Lunn

Periodic output removed by Richard Cochran, until a better abstraction
of a VCO is added to Linux in general.
Signed-off-by: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MV88E6352 and later switches support GPIO control through the "Scratch
& Misc" global2 register. (Older switches do too, though with a slightly
different register interface. Only the 6352-style is implemented here.)

Add a new file, global2_scratch.c, for operations in the Scratch & Misc
space. Additionally, add a GPIO operations structure to present an
abstract view over GPIO manipulation.

Reverse Christmas tree and unsigned has been replaced with unsigned
int by Andrew Lunn.
Signed-off-by: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds basic support for exposing the 32-bit timestamp counter
inside the mv88e6xxx switch as a ptp_clock.

Adjfine implemented by Richard Cochran.
Andrew Lunn: fix return value of PTP stub function.
Signed-off-by: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch implements support for accessing the Precision Time Protocol
and Time Application Interface registers via the AVB register interface
in the Global 2 register.

The register interface differs slightly between different models; older
models use a 3-bit operations field, while newer models use a 2-bit
field. The operations values and the special "global port" values are
different between the two. This is a similar split to the differences
in the "Ingress Rate" register between models, so, like in that case,
we call the two variants "6352" and "6390" and create an ops structure
to abstract between the two.

checkpatch fixups by Andrew Lunn
Signed-off-by: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let the mv88e6xxx_g2_* register accessor functions be accessible
outside of global2.c.
Signed-off-by: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When NET_PTP_CLASSIFY is disabled, a stub function is required in
order that the drivers compile.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>