- 29 Nov, 2023 3 commits
-
-
Karthikeyan Periyasamy authored
When the core rfkill config throws error, it should free the allocated resources. Currently it is not freeing the core pdev create resources. Avoid this issue by calling the core pdev destroy in the error handler of core rfkill config. Found this issue in the code review and it is compile tested only. Fixes: 004ccbc0 ("wifi: ath12k: add support for hardware rfkill for WCN7850") Signed-off-by:
Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231111040107.18708-1-quic_periyasa@quicinc.com
-
James Prestwood authored
Let ath12k select this option automatically which makes building more intuitive if the user enables this driver (rather than the driver not building unless CRYPTO_MICHAEL_MIC is explicitly enabled). Further investigation shows that ath11k and ath12k are the only who use 'depends on' with CRYPTO_MICHAEL_MIC: ./drivers/net/wireless/intel/ipw2x00/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/net/wireless/intersil/hostap/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/net/wireless/intersil/orinoco/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/net/wireless/ath/ath11k/Kconfig: depends on CRYPTO_MICHAEL_MIC ./drivers/net/wireless/ath/ath12k/Kconfig: depends on CRYPTO_MICHAEL_MIC ./drivers/staging/rtl8192e/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/staging/ks7010/Kconfig: select CRYPTO_MICHAEL_MIC Signed-off-by:
James Prestwood <prestwoj@gmail.com> Signed-off-by:
-
James Prestwood authored
Let ath11k select this option automatically which makes building more intuitive if the user enables this driver (rather than the driver not building unless CRYPTO_MICHAEL_MIC is explicitly enabled). Further investigation shows that ath11k and ath12k are the only who use 'depends on' with CRYPTO_MICHAEL_MIC: ./drivers/net/wireless/intel/ipw2x00/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/net/wireless/intersil/hostap/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/net/wireless/intersil/orinoco/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/net/wireless/ath/ath11k/Kconfig: depends on CRYPTO_MICHAEL_MIC ./drivers/net/wireless/ath/ath12k/Kconfig: depends on CRYPTO_MICHAEL_MIC ./drivers/staging/rtl8192e/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/staging/ks7010/Kconfig: select CRYPTO_MICHAEL_MIC Signed-off-by:
-
- 22 Nov, 2023 8 commits
-
-
Jeff Johnson authored
Currently wmi.h has two separate set of definitions for peer flags. One set of flags is defined in enum wmi_tlv_peer_flags, and, except for the last three, are named WMI_TLV_PEER_*. The other set of flags are defined as macros, and are named WMI_PEER_*. The last three macros have the same name as the last three wmi_tlv_peer_flags enumerators. The code only uses the WMI_PEER_* names; the WMI_TLV_PEER_* names are unused. So as a first step in consolidation, remove all the WMI_TLV_PEER_* names. But since having an enum to define all the flags is actually a good thing since that provides a handle by which to refer to the entire set of flags, recast the WMI_PEER_* macros into enumerators. Compile tested only. Signed-off-by:
-
Jeff Johnson authored
Currently wmi.h has two separate set of definitions for peer flags. One set of flags is defined in enum wmi_tlv_peer_flags, and, except for the last three, are named WMI_TLV_PEER_*. The other set of flags are defined as macros, and are named WMI_PEER_*. The last three macros have the same name as the last three wmi_tlv_peer_flags enumerators. The code only uses the WMI_PEER_* names; the WMI_TLV_PEER_* names are unused. So as a first step in consolidation, remove all the WMI_TLV_PEER_* names. But since having an enum to define all the flags is actually a good thing since that provides a handle by which to refer to the entire set of flags, recast the WMI_PEER_* macros into enumerators. Compile tested only. Signed-off-by:
-
Jeff Johnson authored
Currently both struct ath12k_wmi_pdev and struct ath12k_wmi_base define: const struct wmi_peer_flags_map *peer_flags; But that member is not used, and in fact, struct wmi_peer_flags_map is not defined within ath12k; these are obsolete remnants inherited from ath11k. So remove them. Compile tested only. Signed-off-by: -
Jeff Johnson authored
Currently both struct ath11k_pdev_wmi and struct ath11k_wmi_base define: const struct wmi_peer_flags_map *peer_flags; But that member is not used, and in fact, struct wmi_peer_flags_map is not defined within ath11k; these are obsolete remnants inherited from ath10k. So remove them. Compile tested only. Signed-off-by:
-
Jeff Johnson authored
Currently struct ath12k defines the following member: struct ieee80211_ops *ops; This is being flagged by checkpatch.pl: WARNING: struct ieee80211_ops should normally be const The original plan was to add the const qualifier. However, it turns out this is actually unused, so remove it. No functional changes, compile tested only. Signed-off-by:
-
Jeff Johnson authored
Currently struct ath11k defines the following member: struct ieee80211_ops *ops; This is being flagged by checkpatch.pl: WARNING: struct ieee80211_ops should normally be const The original plan was to add the const qualifier. However, it turns out this is actually unused, so remove it. No functional changes, compile tested only. Signed-off-by: -
Jeff Johnson authored
struct ath10k_htc_frame is unused, and since it illogically contains two consecutive flexible arrays, it could never be used, so remove it. No functional changes, compile tested only. Signed-off-by:
-
Dmitry Antipov authored
Since 'ieee80211_txq_get_depth()' allows NULL for 2nd and 3rd arguments, simplify '__ath10k_htt_tx_txq_recalc()' by dropping unused 'frame_cnt'. Compile tested only. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Acked-by:
-
- 13 Nov, 2023 2 commits
-
-
Yang Li authored
./drivers/net/wireless/ath/ath11k/fw.c:136:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7073Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Acked-by:
-
Luca Weiss authored
If we already have gotten the rproc_handle (meaning the "qcom,rproc" property is defined in the devicetree), it's a valid state that the remoteproc module hasn't probed yet so we should defer probing instead of just failing to probe. This resolves a race condition when the ath11k driver probes and fails before the wpss remoteproc driver has probed, like the following: [ 6.232360] ath11k 17a10040.wifi: failed to get rproc [ 6.232366] ath11k 17a10040.wifi: failed to get rproc: -22 [ 6.232478] ath11k: probe of 17a10040.wifi failed with error -22 ... [ 6.252415] remoteproc remoteproc2: 8a00000.remoteproc is available [ 6.252776] remoteproc remoteproc2: powering up 8a00000.remoteproc [ 6.252781] remoteproc remoteproc2: Booting fw image qcom/qcm6490/fairphone5/wpss.mdt, size 7188 So, defer the probe if we hit that so we can retry later once the wpss remoteproc is available. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01264-QCAMSLSWPLZ-1.37886.3 Fixes: d5c65159 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by:Luca Weiss <luca.weiss@fairphone.com> Signed-off-by:
-
- 31 Oct, 2023 2 commits
-
-
Justin Stitt authored
strncpy() is deprecated [1] and we should prefer less ambiguous interfaces. In this case, arvif->u.ap.ssid has its length maintained by arvif->u.ap.ssid_len which indicates it may not need to be NUL-terminated. Make this explicit with __nonstring and use a plain old memcpy. This is also consistent with future copies into arvif->u.ap.ssid: if (changed & BSS_CHANGED_SSID && vif->type == NL80211_IFTYPE_AP) { arvif->u.ap.ssid_len = vif->cfg.ssid_len; if (vif->cfg.ssid_len) memcpy(arvif->u.ap.ssid, vif->cfg.ssid, vif->cfg.ssid_len); arvif->u.ap.hidden_ssid = info->hidden_ssid; } Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by:Justin Stitt <justinstitt@google.com> Acked-by:
-
Ma Ke authored
Since 'user_stats' is a fixed-size array of 'struct htt_ppdu_user_stats' in 'struct htt_ppdu_stats', any of its member can't be NULL and so relevant check may be dropped. Signed-off-by:
Ma Ke <make_ruc2021@163.com> Signed-off-by:
-
- 25 Oct, 2023 18 commits
-
-
Wu Yunchuan authored
No need cast (void *) to (struct net_device *). Signed-off-by:
Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231020093432.214001-1-yunchuan@nfschina.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v6.7. Major changes: ath12k * QCN9274: mesh support ath11k * firmware-2.bin support
-
Kalle Valo authored
This reverts commit e149353e. The commit caused QCA6390 hw2.0 firmware WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1 to crash during disconnect: [71990.787525] ath11k_pci 0000:72:00.0: firmware crashed: MHI_CB_EE_RDDM Closes: https://lore.kernel.org/all/87edhu3550.fsf@kernel.org/Signed-off-by:
-
Jeff Johnson authored
Currently, the logic to return an ath12k_sta pointer, given a ieee80211_sta pointer, uses typecasting throughout the driver. In general, conversion functions are preferable to typecasting since using a conversion function allows the compiler to validate the types of both the input and output parameters. ath12k already defines a conversion function ath12k_vif_to_arvif() for a similar conversion. So introduce ath12k_sta_to_arsta() for this use case, and convert all of the existing typecasting to use this function. Signed-off-by:
-
Johan Hovold authored
The ath12k active pdevs are protected by RCU but the htt mlo-offset event handling code calling ath12k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # v6.2 Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Acked-by:
-
Johan Hovold authored
The ath12k active pdevs are protected by RCU but the DFS-radar and temperature event handling code calling ath12k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as RCU read-side critical sections to avoid any potential use-after-free issues. Note that the temperature event handler looks like a place holder currently but would still trigger an RCU lockdep splat. Compile tested only. Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # v6.2 Signed-off-by:
-
Johan Hovold authored
The ath11k active pdevs are protected by RCU but the gtk offload status event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: a16d9b50 ("ath11k: support GTK rekey offload") Cc: stable@vger.kernel.org # 5.18 Cc: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by:
-
Johan Hovold authored
The ath11k active pdevs are protected by RCU but the htt pktlog handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: d5c65159 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Signed-off-by:
-
Johan Hovold authored
The ath11k active pdevs are protected by RCU but the DFS radar event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: d5c65159 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Acked-by:
-
Johan Hovold authored
The ath11k active pdevs are protected by RCU but the temperature event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section as reported by RCU lockdep: ============================= WARNING: suspicious RCU usage 6.6.0-rc6 #7 Not tainted ----------------------------- drivers/net/wireless/ath/ath11k/mac.c:638 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by swapper/0/0. ... Call trace: ... lockdep_rcu_suspicious+0x16c/0x22c ath11k_mac_get_ar_by_pdev_id+0x194/0x1b0 [ath11k] ath11k_wmi_tlv_op_rx+0xa84/0x2c1c [ath11k] ath11k_htc_rx_completion_handler+0x388/0x510 [ath11k] Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: a41d1034 ("ath11k: add thermal sensor device support") Cc: stable@vger.kernel.org # 5.7 Signed-off-by:
-
Karthikeyan Periyasamy authored
In PCI and HAL interface layer module, the identifier sc is used to represent an instance of ath12k_base structure. However, within ath12k, the convention is to use "ab" to represent an SoC "base" struct. So change the all instances of sc to ab. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Karthikeyan Periyasamy authored
In WMI layer module, the identifier wmi_sc is used to represent an instance of ath12k_wmi_base structure. However, within ath12k, the convention is to use "ab" to represent an SoC "base" struct. So change the all instances of wmi_sc to wmi_ab. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Anilkumar Kolli authored
Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath11k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath11k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath11k_fw_features is empty, the patches adding features will add the flags. With AHB devices there's no amss.bin or m3.bin, so no changes in how AHB firmware files are used. But AHB devices can use future additions to the meta data, for example in enum ath11k_fw_features. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Co-developed-by:
P Praneesh <quic_ppranees@quicinc.com> Signed-off-by:
Anilkumar Kolli <quic_akolli@quicinc.com> Co-developed-by:
-
Kalle Valo authored
Simple refactoring to make it easier to add firmware-2.bin support in the following patch. Earlier ath11k_qmi_m3_load() supported changing m3.bin contents while ath11k is running. But that's not going to actually work, m3.bin is supposed to be the same during the lifetime of ath11k, for example we don't support changing the firmware capabilities on the fly. Due to this ath11k requests m3.bin firmware file first and only then checks m3_mem->vaddr, so we are basically requesting the firmware file even if it's not needed. Reverse the code so that m3_mem buffer is checked first, and only if it doesn't exist, then m3.bin is requested from user space. Checking for m3_mem->size is redundant when m3_mem->vaddr is NULL, we would not be able to use the buffer in that case. So remove the check for size. Simplify the exit handling and use 'goto out'. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Signed-off-by:
-
Dmitry Antipov authored
When compiling with clang-18, I've noticed the following: drivers/net/wireless/realtek/rtw89/fw.c:389:28: warning: cast to smaller integer type 'enum rtw89_fw_type' from 'const void *' [-Wvoid-pointer-to-enum-cast] 389 | enum rtw89_fw_type type = (enum rtw89_fw_type)data; | ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw89/fw.c:569:13: warning: cast to smaller integer type 'enum rtw89_rf_path' from 'const void *' [-Wvoid-pointer-to-enum-cast] 569 | rf_path = (enum rtw89_rf_path)data; | ^~~~~~~~~~~~~~~~~~~~~~~~ So avoid brutal everything-to-const-void-and-back casts, introduce 'union rtw89_fw_element_arg' to pass parameters to element handler callbacks, and adjust all of the related bits accordingly. Compile tested only. Signed-off-by: -
Shiji Yang authored
1. Move MT7620 PA/LNA calibration code to dedicated functions. 2. For external PA/LNA devices, restore RF and BBP registers before R-Calibration. 3. Do Rx DCOC calibration again before RXIQ calibration. 4. Add some missing LNA related registers' initialization. Signed-off-by:
Shiji Yang <yangshiji66@outlook.com> Acked-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
Shiji Yang authored
1. Move the channel configuration code from rt2800_vco_calibration() to the rt2800_config_channel(). 2. Use MT7620 SoC specific AGC initial LNA value instead of the RT5592's value. 3. BBP{195,196} pairing write has been replaced with rt2800_bbp_glrt_write() to reduce redundant code. Signed-off-by: -
Shiji Yang authored
1. Do not hard reset the BBP. We can use soft reset instead. This change has some help to the calibration failure issue. 2. Enable falling back to legacy rate from the HT/RTS rate by setting the HT_FBK_TO_LEGACY register. 3. Implement MCS rate specific maximum PSDU size. It can improve the transmission quality under the low RSSI condition. 4. Set BBP_84 register value to 0x19. This is used for extension channel overlapping IOT. Signed-off-by:
-
- 23 Oct, 2023 7 commits
-
-
Stanislaw Gruszka authored
Helmut hasn't been responding to rt2x00 related emails since 2016, remove him from rt2x00 mainterner list. Signed-off-by:
-
Justin Stitt authored
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect fw_version strings to be NUL-terminated based on other similar assignments: wireless/broadcom/brcm80211/brcmsmac/main.c 7867: snprintf(wlc->wiphy->fw_version, 7868: sizeof(wlc->wiphy->fw_version), "%u.%u", rev, patch); wireless/broadcom/b43legacy/main.c 1765: snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", wireless/broadcom/b43/main.c 2730: snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", wireless/intel/iwlwifi/dvm/main.c 1465: snprintf(priv->hw->wiphy->fw_version, 1466: sizeof(priv->hw->wiphy->fw_version), wireless/intel/ipw2x00/ipw2100.c 5905: snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s", Based on this, NUL-padding is not required. A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Justin Stitt authored
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect wl->chip.fw_ver_str to be NUL-terminated based on its usage with DRIVER_STATE_PRINT_STR() in debugfs.c: 491 | DRIVER_STATE_PRINT_STR(chip.fw_ver_str); ... which uses DRIVER_STATE_PRINT(): 444 | #define DRIVER_STATE_PRINT_STR(x) DRIVER_STATE_PRINT(x, "%s") ... which relies on scnprintf: 434 | #define DRIVER_STATE_PRINT(x, fmt) \ 435 | (res += scnprintf(buf + res, DRIVER_STATE_BUF_LEN - res,\ 436 | #x " = " fmt "\n", wl->x)) Moreover, NUL-padding is not required. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Similar-to: https://lore.kernel.org/all/20231018-strncpy-drivers-net-wireless-ti-wl18xx-main-c-v2-1-ab828a491ce5@google.com/Signed-off-by:
-
Justin Stitt authored
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. wl->chip.phy_fw_ver_str is obviously intended to be NUL-terminated by the deliberate comment telling us as much. Furthermore, its only use is drivers/net/wireless/ti/wlcore/debugfs.c shows us it should be NUL-terminated since its used in scnprintf: 492 | DRIVER_STATE_PRINT_STR(chip.phy_fw_ver_str); which is defined as: | #define DRIVER_STATE_PRINT_STR(x) DRIVER_STATE_PRINT(x, "%s") ... | #define DRIVER_STATE_PRINT(x, fmt) \ | (res += scnprintf(buf + res, DRIVER_STATE_BUF_LEN - res,\ | #x " = " fmt "\n", wl->x)) We can also see that NUL-padding is not required. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. The very fact that a plain-english comment had to be made alongside a manual NUL-byte assignment for such a simple purpose shows why strncpy is faulty. It has non-obvious behavior that has to be clarified every time it is used (and if it isn't then the reader suffers). Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by:
-
Justin Stitt authored
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. Based on other assignments of similar fw_version fields we can see that NUL-termination is required but not NUL-padding: ethernet/intel/ixgbe/ixgbe_ethtool.c 1111: strscpy(drvinfo->fw_version, adapter->eeprom_id, 1112: sizeof(drvinfo->fw_version)); ethernet/intel/igc/igc_ethtool.c 147: scnprintf(adapter->fw_version, 148: sizeof(adapter->fw_version), 153: strscpy(drvinfo->fw_version, adapter->fw_version, 154: sizeof(drvinfo->fw_version)); wireless/broadcom/brcm80211/brcmfmac/core.c 569: strscpy(info->fw_version, drvr->fwver, sizeof(info->fw_version)); wireless/broadcom/brcm80211/brcmsmac/main.c 7867: snprintf(wlc->wiphy->fw_version, 7868: sizeof(wlc->wiphy->fw_version), "%u.%u", rev, patch); wireless/broadcom/b43legacy/main.c 1765: snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", wireless/broadcom/b43/main.c 2730: snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", wireless/intel/iwlwifi/dvm/main.c 1465: snprintf(priv->hw->wiphy->fw_version, 1466: sizeof(priv->hw->wiphy->fw_version), wireless/intel/ipw2x00/ipw2100.c 5905: snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s", A suitable replacement is `strscpy` due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by:
-
Ming Yen Hsieh authored
When the chip not support 6GHz capability, the channels of 6GHz information should not be updated. This caused a crash: [ 19.442078] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 [ 19.457535] Mem abort info: [ 19.465329] ESR = 0x0000000096000004 [ 19.473295] EC = 0x25: DABT (current EL), IL = 32 bits [ 19.482354] SET = 0, FnV = 0 [ 19.489143] EA = 0, S1PTW = 0 [ 19.495991] FSC = 0x04: level 0 translation fault [ 19.504554] Data abort info: [ 19.511111] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 19.520269] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 19.528988] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 19.537960] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001027a9000 [ 19.548014] [0000000000000014] pgd=0000000000000000, p4d=000000000000 [ 19.558429] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 19.568270] Modules linked in: mt7921e mt7921_common mt792x_lib mt76_connac_lib mt76 mac80211 btusb btintel cfg80211 btmtk snd_sof_ipc_msg_ btrtl snd_sof_ipc_flood_test btbcm bluetooth snd_sof_mt8195 uvcvideo mtk_adsp_common snd_sof_xtensa_dsp uvc snd_sof_of snd_sof videobuf2_vmalloc ecdh_generic ecc snd_sof_utils cros_ec_lid_angle cros_ec_sensors crct10dif_ cros_ec_sensors_core cros_usbpd_logger crypto_user fuse ip_tables ipv6 [ 19.614237] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 6.6.0-rc6-next-20231017+ #324 [ 19.625957] Hardware name: Acer Tomato (rev2) board (DT) [ 19.634970] Workqueue: events mt7921_init_work [mt7921_common] [ 19.644522] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTY [ 19.655182] pc : mt7921_regd_notifier+0x180/0x290 [mt7921_common] [ 19.664983] lr : mt7921_regd_notifier+0xd4/0x290 [mt7921_common] [ 19.674679] sp : ffff800080acba80 [ 19.681649] x29: ffff800080acba80 x28: 0000000000000000 x27: ffff4faf [ 19.692483] x26: 0000000000000000 x25: 0000000000000000 x24: ffff4faf [ 19.703294] x23: 00000000ffffe926 x22: ffff4faf16031fa0 x21: 00000000 [ 19.714108] x20: 000000000000001c x19: ffff4faf16ba6f40 x18: 00000000 [ 19.724928] x17: 0000000000000000 x16: ffffac6b891c2750 x15: ffff8000 [ 19.735722] x14: 0000000000000180 x13: 0000000000000000 x12: 00000000 [ 19.746478] x11: 0000000000000002 x10: ffff4faf01c21780 x9 : ffffac6b [ 19.757214] x8 : 00000000006c0000 x7 : ffffac6b6b020cf0 x6 : ffffac6b [ 19.767945] x5 : ffffac6b6b020d00 x4 : ffffac6b6b020cf8 x3 : ffff4faf [ 19.778648] x2 : 0000000000000000 x1 : 000000000000001c x0 : 00000000 [ 19.789366] Call trace: [ 19.795381] mt7921_regd_notifier+0x180/0x290 [mt7921_common] [ 19.804675] wiphy_update_regulatory+0x2bc/0xa08 [cfg80211] [ 19.813864] wiphy_regulatory_register+0x4c/0x88 [cfg80211] [ 19.823029] wiphy_register+0x75c/0x8d0 [cfg80211] [ 19.831446] ieee80211_register_hw+0x70c/0xc10 [mac80211] [ 19.840479] mt76_register_device+0x168/0x2e8 [mt76] [ 19.849008] mt7921_init_work+0xdc/0x250 [mt7921_common] [ 19.857817] process_one_work+0x148/0x3c0 [ 19.865292] worker_thread+0x32c/0x450 [ 19.872489] kthread+0x11c/0x128 [ 19.879173] ret_from_fork+0x10/0x20 [ 19.886153] Code: f0000041 9100a021 94000aef aa0003f9 (b9401780) [ 19.895634] ---[ end trace 0000000000000000 ]--- Reported-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Closes: https://lore.kernel.org/all/927e7d50-826d-4c92-9931-3c59b18c6945@collabora.com/ Fixes: 09382d8f ("wifi: mt76: mt7921: update the channel usage when the regd domain changed") Signed-off-by:
Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Tested-by:
-
Justin Stitt authored
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. `extra` is intended to be NUL-terminated which is evident by the manual assignment of a NUL-byte as well as its immediate usage with strlen(). Moreover, many of these getters and setters are NUL-padding buffers with memset(): 2439 | memset(&tx_power, 0, sizeof(tx_power)); 9998 | memset(sys_config, 0, sizeof(struct ipw_sys_config)); 10084 | memset(tfd, 0, sizeof(*tfd)); 10261 | memset(&dummystats, 0, sizeof(dummystats)); ... let's maintain this behavior and NUL-pad our destination buffer. Considering the above, a suitable replacement is `strscpy_pad` due to the fact that it guarantees both NUL-termination and NUL-padding on the destination buffer. To be clear, there is no bug in the current implementation as MAX_WX_STRING is much larger than the size of the string literals being copied from. Also, strncpy() does NUL-pad the destination buffer and using strscpy_pad() simply matches that behavior. All in all, there should be no functional change but we are one step closer to eliminating usage of strncpy(). Do note that we cannot use the more idiomatic strscpy invocation of (dest, src, sizeof(dest)) as the destination buffer cannot have its size determined at compile time. So, let's stick with (dest, src, LEN). Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by:
-
