- 06 Mar, 2023 4 commits
-
-
Selvin Xavier authored
Following warning reported by KASAN during driver unload ================================================================== BUG: KASAN: double-free in bnxt_remove_one+0x103/0x200 [bnxt_en] Free of addr ffff88814e8dd4c0 by task rmmod/17469 CPU: 47 PID: 17469 Comm: rmmod Kdump: loaded Tainted: G S 6.2.0-rc7+ #2 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.3.10 08/15/2019 Call Trace: <TASK> dump_stack_lvl+0x33/0x46 print_report+0x17b/0x4b3 ? __call_rcu_common.constprop.79+0x27e/0x8c0 ? __pfx_free_object_rcu+0x10/0x10 ? __virt_addr_valid+0xe3/0x160 ? bnxt_remove_one+0x103/0x200 [bnxt_en] kasan_report_invalid_free+0x64/0xd0 ? bnxt_remove_one+0x103/0x200 [bnxt_en] ? bnxt_remove_one+0x103/0x200 [bnxt_en] __kasan_slab_free+0x179/0x1c0 ? bnxt_remove_one+0x103/0x200 [bnxt_en] __kmem_cache_free+0x194/0x350 bnxt_remove_one+0x103/0x200 [bnxt_en] pci_device_remove+0x62/0x110 device_release_driver_internal+0xf6/0x1c0 driver_detach+0x76/0xe0 bus_remove_driver+0x89/0x160 pci_unregister_driver+0x26/0x110 ? strncpy_from_user+0x188/0x1c0 bnxt_exit+0xc/0x24 [bnxt_en] __x64_sys_delete_module+0x21f/0x390 ? __pfx___x64_sys_delete_module+0x10/0x10 ? __pfx_mem_cgroup_handle_over_high+0x10/0x10 ? _raw_spin_lock+0x87/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? __audit_syscall_entry+0x185/0x210 ? ktime_get_coarse_real_ts64+0x51/0x80 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7effcb6fd71b Code: 73 01 c3 48 8b 0d 6d 17 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 17 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffeada270b8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005623660e0750 RCX: 00007effcb6fd71b RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005623660e07b8 RBP: 0000000000000000 R08: 00007ffeada26031 R09: 0000000000000000 R10: 00007effcb771280 R11: 0000000000000206 R12: 00007ffeada272e0 R13: 00007ffeada28bc4 R14: 00005623660e02a0 R15: 00005623660e0750 </TASK> Auxiliary device structures are freed in bnxt_aux_dev_release. So avoid calling kfree from bnxt_remove_one. Also, set bp->edev to NULL before freeing the auxilary private structure. Fixes: d80d88b0 ("bnxt_en: Add auxiliary driver support") Reviewed-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The driver needs to keep track of all the possible concurrent TPA (GRO/LRO) completions on the aggregation ring. On P5 chips, the maximum number of concurrent TPA is 256 and the amount of memory we allocate is order-5 on systems using 4K pages. Memory allocation failure has been reported: NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1 CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1 Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022 Call Trace: dump_stack+0x57/0x6e warn_alloc.cold.120+0x7b/0xdd ? _cond_resched+0x15/0x30 ? __alloc_pages_direct_compact+0x15f/0x170 __alloc_pages_slowpath.constprop.108+0xc58/0xc70 __alloc_pages_nodemask+0x2d0/0x300 kmalloc_order+0x24/0xe0 kmalloc_order_trace+0x19/0x80 bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en] ? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en] __bnxt_open_nic+0x12e/0x780 [bnxt_en] bnxt_open+0x10b/0x240 [bnxt_en] __dev_open+0xe9/0x180 __dev_change_flags+0x1af/0x220 dev_change_flags+0x21/0x60 do_setlink+0x35c/0x1100 Instead of allocating this big chunk of memory and dividing it up for the concurrent TPA instances, allocate each small chunk separately for each TPA instance. This will reduce it to order-0 allocations. Fixes: 79632e9b ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.") Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by:
Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Russell King (Oracle) authored
The locking in phy_probe() and phy_remove() does very little to prevent any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA warnings. Remove it. ====================================================== WARNING: possible circular locking dependency detected 6.2.0-dirty #1108 Tainted: G W E ------------------------------------------------------ ip/415 is trying to acquire lock: ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy] but task is already holding lock: ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 rtnl_lock+0x24/0x30 sfp_bus_add_upstream+0x34/0x150 phy_sfp_probe+0x4c/0x94 [libphy] mv3310_probe+0x148/0x184 [marvell10g] phy_probe+0x8c/0x200 [libphy] call_driver_probe+0xbc/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __device_attach_driver+0xc4/0x160 bus_for_each_drv+0x80/0xe0 __device_attach+0xb0/0x1f0 device_initial_probe+0x1c/0x2c bus_probe_device+0xa4/0xb0 device_add+0x360/0x53c phy_device_register+0x60/0xa4 [libphy] fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio] fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio] of_mdiobus_register+0x140/0x340 [of_mdio] orion_mdio_probe+0x298/0x3c0 [mvmdio] platform_probe+0x70/0xe0 call_driver_probe+0x34/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __driver_attach+0x104/0x210 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x3c bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __platform_driver_register+0x30/0x3c xt_compat_calc_jump+0x28/0xa4 [x_tables] do_one_initcall+0x50/0x1b0 do_init_module+0x50/0x1fc load_module+0x684/0x744 __do_sys_finit_module+0xc4/0x140 __arm64_sys_finit_module+0x28/0x34 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 -> #0 (&dev->lock){+.+.}-{3:3}: check_prev_add+0xb4/0xc80 validate_chain+0x414/0x47c __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 phy_attach_direct+0x17c/0x3a0 [libphy] phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink] phylink_fwnode_phy_connect+0x48/0x60 [phylink] mvpp2_open+0xec/0x2e0 [mvpp2] __dev_open+0x104/0x214 __dev_change_flags+0x1d4/0x254 dev_change_flags+0x2c/0x7c do_setlink+0x254/0xa50 __rtnl_newlink+0x430/0x514 rtnl_newlink+0x58/0x8c rtnetlink_rcv_msg+0x17c/0x560 netlink_rcv_skb+0x64/0x150 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x1d4/0x2b4 netlink_sendmsg+0x1a4/0x400 ____sys_sendmsg+0x228/0x290 ___sys_sendmsg+0x88/0xec __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&dev->lock); lock(rtnl_mutex); lock(&dev->lock); *** DEADLOCK *** Fixes: 298e54fa ("net: phy: add core phylib sfp support") Reported-by:Marc Zyngier <maz@kernel.org> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Rongguang Wei authored
When MAC is not support PMT, driver will check PHY's WoL capability and set device wakeup capability in stmmac_init_phy(). We can enable the WoL through ethtool, the driver would enable the device wake up flag. Now the device_may_wakeup() return true. But if there is a way which enable the PHY's WoL capability derectly, like in BIOS. The driver would not know the enable thing and would not set the device wake up flag. The phy_suspend may failed like this: [ 32.409063] PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x50 returns -16 [ 32.409065] PM: Device stmmac-1:00 failed to suspend: error -16 [ 32.409067] PM: Some devices failed to suspend, or early wake event detected Add to set the device wakeup enable flag according to the get_wol function result in PHY can fix the error in this scene. v2: add a Fixes tag. Fixes: 1d8e5b0f ("net: stmmac: Support WOL with phy") Signed-off-by:
Rongguang Wei <weirongguang@kylinos.cn> Signed-off-by:
-
- 03 Mar, 2023 12 commits
-
-
David S. Miller authored
Simon Horman says: ==================== nfp: fix incorrect IPsec checksum handling this short series resolves two problems with IPsec checksum handling in the nfp driver. * PATCH 1/3, 2/3: Correct setting of checksum flags. One patch for each of the nfd3 and nfdk datapaths. * Patch 3/3: Correct configuration of NETIF_F_CSUM_MASK so that the stack does not unecessarily calculate csums for IPsec offload packets. ==================== Signed-off-by: -
Huanhuan Wang authored
When esp-tx-csum-offload is set to on, the protocol stack shouldn't calculate the IPsec offload packet's csum, but it does. Because the callback `.ndo_features_check` incorrectly masked NETIF_F_CSUM_MASK bit. Fixes: 57f273ad ("nfp: add framework to support ipsec offloading") Signed-off-by:
Huanhuan Wang <huanhuan.wang@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Huanhuan Wang authored
The csum flag of IPsec packet are set repeatedly. Therefore, the csum flag set of IPsec and non-IPsec packet need to be distinguished. As the ipv6 header does not have a csum field, so l3-csum flag is not required to be set for ipv6 case. Fixes: 436396f2 ("nfp: support IPsec offloading for NFP3800") Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
-
Huanhuan Wang authored
The csum flag of IPsec packet are set repeatedly. Therefore, the csum flag set of IPsec and non-IPsec packet need to be distinguished. As the ipv6 header does not have a csum field, so l3-csum flag is not required to be set for ipv6 case. L4-csum flag include the tcp csum flag and udp csum flag, we shouldn't set the udp and tcp csum flag at the same time for one packet, should set l4-csum flag according to the transport layer is tcp or udp. Fixes: 57f273ad ("nfp: add framework to support ipsec offloading") Signed-off-by:
-
Petr Oros authored
ice_get_module_eeprom() is broken since commit e9c9692c ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ .... Fixes: e9c9692c ("ice: Reimplement module reads used by ethtool") Signed-off-by:
Petr Oros <poros@redhat.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== tools: ynl: fix subset use and change default value for attrs/ops Fix a problem in subsetting, which will become apparent when the devlink family comes after the merge window. Even tho none of the existing families need this, we don't want someone to get "inspired" by the current, incorrect code when using specs in other languages. Change the default value for the first attr/op. This is a slight behavior change so needs to go in now. The diffstat of the last patch should serve as the clearest justification there.. ==================== Signed-off-by: -
Jakub Kicinski authored
Now that the codegen rules had been changed we can update the specs to reflect the new default. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Pretty much all families use value: 1 or reserve as unspec the first entry in attribute set and the first operation. Make this the default. Update documentation (the doc for values of operations just refers back to doc for attrs so updating only attrs). Signed-off-by:
-
Jakub Kicinski authored
To avoid having to repeat the entire definition of an attribute (including the value) use the Attr object from the original set. In fact this is already the documented expectation. Fixes: be5bea1c ("net: add basic C code generators for Netlink") Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'ieee802154-for-net-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== ieee802154 for net 2023-03-02 Two small fixes this time. Alexander Aring fixed a potential negative array access in the ca8210 driver. Miquel Raynal fixed a crash that could have been triggered through the extended netlink API for 802154. This only came in this merge window. Found by syzkaller. * tag 'ieee802154-for-net-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan: ieee802154: Prevent user from crashing the host ca8210: fix mac_len negative array access ==================== Link: https://lore.kernel.org/r/20230302153032.1312755-1-stefan@datenfreihafen.orgSigned-off-by:
-
Shigeru Yoshida authored
syzbot reported use-after-free in cfusbl_device_notify() [1]. This causes a stack trace like below: BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138 Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214 CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10227 [inline] netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341 default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> When unregistering a net device, unregister_netdevice_many_notify() sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers with NETDEV_UNREGISTER, and adds the device to the todo list. Later on, devices in the todo list are processed by netdev_run_todo(). netdev_run_todo() waits devices' reference count become 1 while rebdoadcasting NETDEV_UNREGISTER notification. When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple times, the parent device might be freed. This could cause UAF. Processing NETDEV_UNREGISTER multiple times also causes inbalance of reference count for the module. This patch fixes the issue by accepting only first NETDEV_UNREGISTER notification. Fixes: 7ad65bf6 ("caif: Add support for CAIF over CDC NCM USB interface") CC: sjur.brandeland@stericsson.com <sjur.brandeland@stericsson.com> Reported-by: syzbot+b563d33852b893653a9e@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=c3bfd8e2450adab3bffe4d80821fbbced600407f [1] Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20230301163913.391304-1-syoshida@redhat.comSigned-off-by:
-
Yuiko Oshino authored
Move the LAN7800 internal phy (phy ID 0x0007c132) specific register accesses to the phy driver (microchip.c). Fix the error reported by Enguerrand de Ribaucourt in December 2022, "Some operations during the cable switch workaround modify the register LAN88XX_INT_MASK of the PHY. However, this register is specific to the LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801, that register (0x19), corresponds to the LED and MAC address configuration, resulting in unapropriate behavior." I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800 with the internal PHY. Fixes: 14437e3f ("lan78xx: workaround of forced 100 Full/Half duplex mode error") Signed-off-by:
Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by:
-
- 02 Mar, 2023 6 commits
-
-
Miquel Raynal authored
Avoid crashing the machine by checking info->attrs[NL802154_ATTR_SCAN_TYPE] presence before de-referencing it, which was the primary intend of the blamed patch. Reported-by:
Sanan Hasanov <sanan.hasanov@Knights.ucf.edu> Suggested-by:
Eric Dumazet <edumazet@google.com> Fixes: a0b61066 ("ieee802154: Convert scan error messages to extack") Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230301154450.547716-1-miquel.raynal@bootlin.comSigned-off-by:
Stefan Schmidt <stefan@datenfreihafen.org>
-
Alexander Aring authored
This patch fixes a buffer overflow access of skb->data if ieee802154_hdr_peek_addrs() fails. Reported-by:
lianhui tang <bluetlh@gmail.com> Signed-off-by:
Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20230217042504.3303396-1-aahringo@redhat.comSigned-off-by:
-
Brian Vazquez authored
Florian reported a regression and sent a patch with the following changelog: <quote> There is a noticeable tcp performance regression (loopback or cross-netns), seen with iperf3 -Z (sendfile mode) when generic retpolines are needed. With SK_RECLAIM_THRESHOLD checks gone number of calls to enter/leave memory pressure happen much more often. For TCP indirect calls are used. We can't remove the if-set-return short-circuit check in tcp_enter_memory_pressure because there are callers other than sk_enter_memory_pressure. Doing a check in the sk wrapper too reduces the indirect calls enough to recover some performance. Before, 0.00-60.00 sec 322 GBytes 46.1 Gbits/sec receiver After: 0.00-60.04 sec 359 GBytes 51.4 Gbits/sec receiver "iperf3 -c $peer -t 60 -Z -f g", connected via veth in another netns. </quote> It seems we forgot to upstream this indirect call mitigation we had for years, lets do this instead. [edumazet] - It seems we forgot to upstream this indirect call mitigation we had for years, let's do this instead. - Changed to INDIRECT_CALL_INET_1() to avoid bots reports. Fixes: 4890b686 ("net: keep sk->sk_forward_alloc as small as possible") Reported-by:Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/netdev/20230227152741.4a53634b@kernel.org/T/Signed-off-by:
Brian Vazquez <brianvv@google.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix bogus error report in selftests/netfilter/nft_nat.sh, from Hangbin Liu. 2) Initialize last and quota expressions from template when expr_ops::clone is called, otherwise, states are not restored accordingly when loading a dynamic set with elements using these two expressions. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_quota: copy content when cloning expression netfilter: nft_last: copy content when cloning expression selftests: nft_nat: ensuring the listening side is up before starting the client ==================== Link: https://lore.kernel.org/r/20230301222021.154670-1-pablo@netfilter.orgSigned-off-by:
-
Jakub Kicinski authored
syzbot sent a hung task report and Eric explains that adversarial receiver may keep RWIN at 0 for a long time, so we are not guaranteed to make forward progress. Thread which took tx_lock and went to sleep may not release tx_lock for hours. Use interruptible sleep where possible and reschedule the work if it can't take the lock. Testing: existing selftest passes Reported-by: syzbot+9c0268252b8ef967c62e@syzkaller.appspotmail.com Fixes: 79ffe608 ("net/tls: add a TX lock") Link: https://lore.kernel.org/all/000000000000e412e905f5b46201@google.com/ Cc: stable@vger.kernel.org # wait 4 weeks Reviewed-by:
-
Hangyu Hua authored
ctx->crypto_send.info is not protected by lock_sock in do_tls_getsockopt_conf(). A race condition between do_tls_getsockopt_conf() and error paths of do_tls_setsockopt_conf() may lead to a use-after-free or null-deref. More discussion: https://lore.kernel.org/all/Y/ht6gQL+u6fj3dG@hog/ Fixes: 3c4d7559 ("tls: kernel TLS support") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20230228023344.9623-1-hbh25y@gmail.comSigned-off-by:
-
- 01 Mar, 2023 8 commits
-
-
Pablo Neira Ayuso authored
If the ruleset contains consumed quota, restore them accordingly. Otherwise, listing after restoration shows never used items. Restore the user-defined quota and flags too. Fixes: ed0a0c60 ("netfilter: nft_quota: move stateful fields out of expression data") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
If the ruleset contains last timestamps, restore them accordingly. Otherwise, listing after restoration shows never used items. Fixes: 33a24de3 ("netfilter: nft_last: move stateful fields out of expression data") Signed-off-by:
-
Hangbin Liu authored
The test_local_dnat_portonly() function initiates the client-side as soon as it sets the listening side to the background. This could lead to a race condition where the server may not be ready to listen. To ensure that the server-side is up and running before initiating the client-side, a delay is introduced to the test_local_dnat_portonly() function. Before the fix: # ./nft_nat.sh PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU 2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused ERROR: inet port rewrite After the fix: # ./nft_nat.sh PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ PASS: inet port rewrite without l3 address Fixes: 282e5f8f ("netfilter: nat: really support inet nat without l3 address") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Horatiu Vultur authored
When the police was removed from the port, then it was trying to remove the police from the police id and not from the actual police index. The police id represents the id of the police and police index represents the position in HW where the police is situated. The port police id can be any number while the port police index is a number based on the port chip port. Fix this by deleting the police from HW that is situated at the police index and not police id. Fixes: 5390334b ("net: lan966x: Add port police support using tc-matchall") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Eric Dumazet authored
The two "goto errout;" paths in fl_change() became wrong after cited commit. Indeed we only must not call __fl_put() until the net pointer has been set in tcf_exts_init_ex() This is a minimal fix. We might in the future validate TCA_FLOWER_FLAGS before we allocate @fnew. BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:72 [inline] BUG: KASAN: null-ptr-deref in atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline] BUG: KASAN: null-ptr-deref in refcount_read include/linux/refcount.h:147 [inline] BUG: KASAN: null-ptr-deref in __refcount_add_not_zero include/linux/refcount.h:152 [inline] BUG: KASAN: null-ptr-deref in __refcount_inc_not_zero include/linux/refcount.h:227 [inline] BUG: KASAN: null-ptr-deref in refcount_inc_not_zero include/linux/refcount.h:245 [inline] BUG: KASAN: null-ptr-deref in maybe_get_net include/net/net_namespace.h:269 [inline] BUG: KASAN: null-ptr-deref in tcf_exts_get_net include/net/pkt_cls.h:260 [inline] BUG: KASAN: null-ptr-deref in __fl_put net/sched/cls_flower.c:513 [inline] BUG: KASAN: null-ptr-deref in __fl_put+0x13e/0x3b0 net/sched/cls_flower.c:508 Read of size 4 at addr 000000000000014c by task syz-executor548/5082 CPU: 0 PID: 5082 Comm: syz-executor548 Not tainted 6.2.0-syzkaller-05251-g5b7c4cab #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_report mm/kasan/report.c:420 [inline] kasan_report+0xec/0x130 mm/kasan/report.c:517 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x141/0x190 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:72 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline] refcount_read include/linux/refcount.h:147 [inline] __refcount_add_not_zero include/linux/refcount.h:152 [inline] __refcount_inc_not_zero include/linux/refcount.h:227 [inline] refcount_inc_not_zero include/linux/refcount.h:245 [inline] maybe_get_net include/net/net_namespace.h:269 [inline] tcf_exts_get_net include/net/pkt_cls.h:260 [inline] __fl_put net/sched/cls_flower.c:513 [inline] __fl_put+0x13e/0x3b0 net/sched/cls_flower.c:508 fl_change+0x101b/0x4ab0 net/sched/cls_flower.c:2341 tc_new_tfilter+0x97c/0x2290 net/sched/cls_api.c:2310 rtnetlink_rcv_msg+0x996/0xd50 net/core/rtnetlink.c:6165 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2574 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745 ____sys_sendmsg+0x334/0x900 net/socket.c:2504 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2558 __sys_sendmmsg+0x18f/0x460 net/socket.c:2644 __do_sys_sendmmsg net/socket.c:2673 [inline] __se_sys_sendmmsg net/socket.c:2670 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2670 Fixes: 08a0063d ("net/sched: flower: Move filter handle initialization earlier") Reported-by: syzbot+baabf3efa7c1e57d28b2@syzkaller.appspotmail.com Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
ila_xlat_nl_cmd_get_mapping() generates an empty skb, triggerring a recent sanity check [1]. Instead, return an error code, so that user space can get it. [1] skb_assert_len WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 skb_assert_len include/linux/skbuff.h:2527 [inline] WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 Modules linked in: CPU: 0 PID: 5923 Comm: syz-executor269 Not tainted 6.2.0-syzkaller-18300-g2ebd1fbb946d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_assert_len include/linux/skbuff.h:2527 [inline] pc : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 lr : skb_assert_len include/linux/skbuff.h:2527 [inline] lr : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 sp : ffff80001e0d6c40 x29: ffff80001e0d6e60 x28: dfff800000000000 x27: ffff0000c86328c0 x26: dfff800000000000 x25: ffff0000c8632990 x24: ffff0000c8632a00 x23: 0000000000000000 x22: 1fffe000190c6542 x21: ffff0000c8632a10 x20: ffff0000c8632a00 x19: ffff80001856e000 x18: ffff80001e0d5fc0 x17: 0000000000000000 x16: ffff80001235d16c x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: ff80800008353a30 x10: 0000000000000000 x9 : 21567eaf25bfb600 x8 : 21567eaf25bfb600 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff80001e0d6558 x4 : ffff800015c74760 x3 : ffff800008596744 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000000e Call trace: skb_assert_len include/linux/skbuff.h:2527 [inline] __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 dev_queue_xmit include/linux/netdevice.h:3033 [inline] __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 [inline] __netlink_deliver_tap+0x45c/0x6f8 net/netlink/af_netlink.c:325 netlink_deliver_tap+0xf4/0x174 net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1283 [inline] netlink_sendskb+0x6c/0x154 net/netlink/af_netlink.c:1292 netlink_unicast+0x334/0x8d4 net/netlink/af_netlink.c:1380 nlmsg_unicast include/net/netlink.h:1099 [inline] genlmsg_unicast include/net/genetlink.h:433 [inline] genlmsg_reply include/net/genetlink.h:443 [inline] ila_xlat_nl_cmd_get_mapping+0x620/0x7d0 net/ipv6/ila/ila_xlat.c:493 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x938/0xc1c net/netlink/genetlink.c:1065 netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2574 genl_rcv+0x38/0x50 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x800/0xae0 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x558/0x844 net/socket.c:2479 ___sys_sendmsg net/socket.c:2533 [inline] __sys_sendmsg+0x26c/0x33c net/socket.c:2562 __do_sys_sendmsg net/socket.c:2571 [inline] __se_sys_sendmsg net/socket.c:2569 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2569 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x258 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193 el0_svc+0x58/0x168 arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 irq event stamp: 136484 hardirqs last enabled at (136483): [<ffff800008350244>] __up_console_sem+0x60/0xb4 kernel/printk/printk.c:345 hardirqs last disabled at (136484): [<ffff800012358d60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:405 softirqs last enabled at (136418): [<ffff800008020ea8>] softirq_handle_end kernel/softirq.c:414 [inline] softirqs last enabled at (136418): [<ffff800008020ea8>] __do_softirq+0xd4c/0xfa4 kernel/softirq.c:600 softirqs last disabled at (136371): [<ffff80000802b4a4>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80 ---[ end trace 0000000000000000 ]--- skb len=0 headroom=0 headlen=0 tailroom=192 mac=(0,0) net=(0,-1) trans=-1 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0010 pkttype=6 iif=0 dev name=nlmon0 feat=0x0000000000005861 Fixes: 7f00feaf ("ila: Add generic ILA translation facility") Reported-by:
-
Pedro Tammela authored
Smatch reports that 'ci' can be used uninitialized. The current code ignores errno coming from tcf_idr_check_alloc, which will lead to the incorrect usage of 'ci'. Handle the errno as it should. Fixes: 288864ef ("net/sched: act_connmark: transition to percpu stats and rcu") Reviewed-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
-
Eric Dumazet authored
Once initial skb->head has been allocated from skb_small_head_cache, we need to make sure to use the same strategy whenever skb->head has to be re-allocated, as found by syzbot [1] This means kmalloc_reserve() can not fallback from using skb_small_head_cache to generic (power-of-two) kmem caches. It seems that we probably want to rework things in the future, to partially revert following patch, because we no longer use ksize() for skb allocated in TX path. 2b88cba5 ("net: preserve skb_end_offset() in skb_unclone_keeptruesize()") Ideally, TCP stack should never put payload in skb->head, this effort has to be completed. In the mean time, add a sanity check. [1] BUG: KASAN: invalid-free in slab_free mm/slub.c:3787 [inline] BUG: KASAN: invalid-free in kmem_cache_free+0xee/0x5c0 mm/slub.c:3809 Free of addr ffff88806cdee800 by task syz-executor239/5189 CPU: 0 PID: 5189 Comm: syz-executor239 Not tainted 6.2.0-rc8-syzkaller-02400-gd1fabc68 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:306 [inline] print_report+0x15e/0x45d mm/kasan/report.c:417 kasan_report_invalid_free+0x9b/0x1b0 mm/kasan/report.c:482 ____kasan_slab_free+0x1a5/0x1c0 mm/kasan/common.c:216 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1781 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1807 slab_free mm/slub.c:3787 [inline] kmem_cache_free+0xee/0x5c0 mm/slub.c:3809 skb_kfree_head net/core/skbuff.c:857 [inline] skb_kfree_head net/core/skbuff.c:853 [inline] skb_free_head+0x16f/0x1a0 net/core/skbuff.c:872 skb_release_data+0x57a/0x820 net/core/skbuff.c:901 skb_release_all net/core/skbuff.c:966 [inline] __kfree_skb+0x4f/0x70 net/core/skbuff.c:980 tcp_wmem_free_skb include/net/tcp.h:302 [inline] tcp_rtx_queue_purge net/ipv4/tcp.c:3061 [inline] tcp_write_queue_purge+0x617/0xcf0 net/ipv4/tcp.c:3074 tcp_v4_destroy_sock+0x125/0x810 net/ipv4/tcp_ipv4.c:2302 inet_csk_destroy_sock+0x19a/0x440 net/ipv4/inet_connection_sock.c:1195 __tcp_close+0xb96/0xf50 net/ipv4/tcp.c:3021 tcp_close+0x2d/0xc0 net/ipv4/tcp.c:3033 inet_release+0x132/0x270 net/ipv4/af_inet.c:426 __sock_release+0xcd/0x280 net/socket.c:651 sock_close+0x1c/0x20 net/socket.c:1393 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x23c/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f2511f546c3 Code: c7 c2 c0 ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 64 8b 04 25 18 00 00 00 85 c0 75 14 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24 0c e8 RSP: 002b:00007ffef0103d48 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f2511f546c3 RDX: 0000000000000978 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000003434 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffef0103d6c R13: 00007ffef0103d80 R14: 00007ffef0103dc0 R15: 0000000000000003 </TASK> Allocated by task 5189: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] ____kasan_kmalloc mm/kasan/common.c:333 [inline] __kasan_kmalloc+0xa5/0xb0 mm/kasan/common.c:383 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slab_common.c:968 [inline] __kmalloc_node_track_caller+0x5b/0xc0 mm/slab_common.c:988 kmalloc_reserve+0xf1/0x230 net/core/skbuff.c:539 pskb_expand_head+0x237/0x1160 net/core/skbuff.c:1995 __skb_unclone_keeptruesize+0x93/0x220 net/core/skbuff.c:2094 skb_unclone_keeptruesize include/linux/skbuff.h:1910 [inline] skb_prepare_for_shift net/core/skbuff.c:3804 [inline] skb_shift+0xef8/0x1e20 net/core/skbuff.c:3877 tcp_skb_shift net/ipv4/tcp_input.c:1538 [inline] tcp_shift_skb_data net/ipv4/tcp_input.c:1646 [inline] tcp_sacktag_walk+0x93b/0x18a0 net/ipv4/tcp_input.c:1713 tcp_sacktag_write_queue+0x1599/0x31d0 net/ipv4/tcp_input.c:1974 tcp_ack+0x2e9f/0x5a10 net/ipv4/tcp_input.c:3847 tcp_rcv_established+0x667/0x2230 net/ipv4/tcp_input.c:6006 tcp_v4_do_rcv+0x670/0x9b0 net/ipv4/tcp_ipv4.c:1721 sk_backlog_rcv include/net/sock.h:1113 [inline] __release_sock+0x133/0x3b0 net/core/sock.c:2921 release_sock+0x58/0x1b0 net/core/sock.c:3488 tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1485 inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745 sock_write_iter+0x295/0x3d0 net/socket.c:1136 call_write_iter include/linux/fs.h:2189 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff88806cdee800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of 1024-byte region [ffff88806cdee800, ffff88806cdeec00) The buggy address belongs to the physical page: page:ffffea0001b37a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x6cde8 head:ffffea0001b37a00 order:3 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 ffff888012441dc0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1f2a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_MEMALLOC|__GFP_HARDWALL), pid 75, tgid 75 (kworker/u4:4), ts 96369578780, free_ts 26734162530 prep_new_page mm/page_alloc.c:2531 [inline] get_page_from_freelist+0x119c/0x2ce0 mm/page_alloc.c:4283 __alloc_pages+0x1cb/0x5b0 mm/page_alloc.c:5549 alloc_pages+0x1aa/0x270 mm/mempolicy.c:2287 alloc_slab_page mm/slub.c:1851 [inline] allocate_slab+0x25f/0x350 mm/slub.c:1998 new_slab mm/slub.c:2051 [inline] ___slab_alloc+0xa91/0x1400 mm/slub.c:3193 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3292 __slab_alloc_node mm/slub.c:3345 [inline] slab_alloc_node mm/slub.c:3442 [inline] __kmem_cache_alloc_node+0x1a4/0x430 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc_node_track_caller+0x4b/0xc0 mm/slab_common.c:988 kmalloc_reserve+0xf1/0x230 net/core/skbuff.c:539 __alloc_skb+0x129/0x330 net/core/skbuff.c:608 __netdev_alloc_skb+0x74/0x410 net/core/skbuff.c:672 __netdev_alloc_skb_ip_align include/linux/skbuff.h:3203 [inline] netdev_alloc_skb_ip_align include/linux/skbuff.h:3213 [inline] batadv_iv_ogm_aggregate_new+0x106/0x4e0 net/batman-adv/bat_iv_ogm.c:558 batadv_iv_ogm_queue_add net/batman-adv/bat_iv_ogm.c:670 [inline] batadv_iv_ogm_schedule_buff+0xe6b/0x1450 net/batman-adv/bat_iv_ogm.c:849 batadv_iv_ogm_schedule net/batman-adv/bat_iv_ogm.c:868 [inline] batadv_iv_ogm_schedule net/batman-adv/bat_iv_ogm.c:861 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x744/0x910 net/batman-adv/bat_iv_ogm.c:1712 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1446 [inline] free_pcp_prepare+0x66a/0xc20 mm/page_alloc.c:1496 free_unref_page_prepare mm/page_alloc.c:3369 [inline] free_unref_page+0x1d/0x490 mm/page_alloc.c:3464 free_contig_range+0xb5/0x180 mm/page_alloc.c:9488 destroy_args+0xa8/0x64c mm/debug_vm_pgtable.c:998 debug_vm_pgtable+0x28de/0x296f mm/debug_vm_pgtable.c:1318 do_one_initcall+0x141/0x790 init/main.c:1306 do_initcall_level init/main.c:1379 [inline] do_initcalls init/main.c:1395 [inline] do_basic_setup init/main.c:1414 [inline] kernel_init_freeable+0x6f9/0x782 init/main.c:1634 kernel_init+0x1e/0x1d0 init/main.c:1522 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 Memory state around the buggy address: ffff88806cdee700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88806cdee780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88806cdee800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff88806cdee880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: bf9f1baa ("net: add dedicated kmem_cache for typical/small skb->head") Reported-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
- 28 Feb, 2023 7 commits
-
-
Jakub Kicinski authored
Gaurav reports that TLS Rx is broken with async crypto accelerators. The commit under fixes missed updating the retval byte counting logic when updating how records are stored. Even tho both before and after the change 'decrypted' was updated inside the main loop, it was completely overwritten when processing the async completions. Now that the rx_list only holds non-zero-copy records we need to add, not overwrite. Reported-and-bisected-by:
Gaurav Jain <gaurav.jain@nxp.com> Fixes: cbbdee99 ("tls: rx: async: don't put async zc on the list") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217064Tested-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Freescale T1040RDB DTS updates This contains a fix for the new device tree for the T1040RDB rev A board, which never worked, and an update to enable multiple CPU port support for all revisions of the T1040RDB. ==================== Link: https://lore.kernel.org/r/20230224155941.514638-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Since commit eca70102 ("net: dsa: felix: add support for changing DSA master") included in kernel v6.1, the driver supports 2 CPU ports, and they can be put in a LAG, for example (see Documentation/networking/dsa/configuration.rst for more details). Defining the second CPU port in the device tree should not cause any compatibility issue, because the default CPU port was &seville_port8 before this change, and still is &seville_port8 now (the numerically first CPU port is used by default). Signed-off-by:
-
Vladimir Oltean authored
It looks like U-Boot fails to start the kernel properly when the compatible string of the board isn't fsl,T1040RDB, so stop overriding it from the rev-a.dts. Fixes: 5ebb7474 ("powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch") Signed-off-by:
-
Dan Carpenter authored
If genphy_c45_read_eee_adv() fails then we need to do a reset and unlock the &phydev->lock mutex before returning. Fixes: 3eeca4e1 ("net: phy: do not force EEE support") Signed-off-by:
Dan Carpenter <error27@gmail.com> Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/Y/x/6kHCjnQHqOpF@kiliSigned-off-by:
-
Kang Chen authored
devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause out-of-bounds write in device_property_read_u8_array later. Fixes: a06347c0 ("NFC: Add Intel Fields Peak NFC solution driver") Signed-off-by:
Kang Chen <void0red@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Rafał Miłecki authored
While bringing hardware up we should perform a full reset including the switch bit (BGMAC_BCMA_IOCTL_SW_RESET aka SICF_SWRST). It's what specification says and what reference driver does. This seems to be critical for the BCM5358. Without this hardware doesn't get initialized properly and doesn't seem to transmit or receive any packets. Originally bgmac was calling bgmac_chip_reset() before setting "has_robosw" property which resulted in expected behaviour. That has changed as a side effect of adding platform device support which regressed BCM5358 support. Fixes: f6a95a24 ("net: ethernet: bgmac: Add platform device support") Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230227091156.19509-1-zajec5@gmail.comSigned-off-by:
-
- 27 Feb, 2023 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ... -
Eric Dumazet authored
This is a follow up of commit 0a375c82 ("tcp: tcp_rtx_synack() can be called from process context"). Frederick Lawler reported another "__this_cpu_add() in preemptible" warning caused by the same reason. In my former patch I took care of tcp_rtx_synack() but forgot that tcp_check_req() also contained some SNMP updates. Note that some parts of tcp_check_req() always run in BH context, I added a comment to clarify this. Fixes: 8336886f ("tcp: TCP Fast Open Server - support TFO listeners") Link: https://lore.kernel.org/netdev/8cd33923-a21d-397c-e46b-2a068c287b03@cloudflare.com/T/Signed-off-by:
Frederick Lawler <fred@cloudflare.com> Tested-by:
-
Oleksij Rempel authored
Without proper initialization, "changed" returned random numbers and caused interface initialization failures. Fixes: 022c3f87 ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
-
