Merge tag 'pwm/for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The bulk of this is trivial conversions to the new .remove_new()
  callback for drivers as part of Uwe's effort to clean that up.

  Other than that a driver is added for Apple devices and various small
  fixes are included for existing drivers.

  Last but not least, this finally gets rid of the old pwm_request() and
  pwm_free() APIs are removed since the last user was dropped in v6.3"

* tag 'pwm/for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
  pwm: Remove unused radix tree
  pwm: Delete deprecated functions pwm_request() and pwm_free()
  pwm: meson: Fix g12a ao clk81 name
  pwm: meson: Fix axg ao mux parents
  pwm: stm32: Enforce settings for PWM capture
  MAINTAINERS: Add entries for Apple PWM driver
  pwm: Add Apple PWM controller
  dt-bindings: pwm: Add Apple PWM controller
  pwm: mtk-disp: Configure double buffering before reading in .get_state()
  pwm: mtk-disp: Disable shadow registers before setting backlight values
  pwm: stm32-lp: Drop of_match_ptr for ID table
  pwm: rcar: Drop of_match_ptr for ID table
  dt-bindings: pwm: Convert Amlogic Meson PWM binding
  dt-bindings: pwm: mediatek: Add mediatek,mt7986 compatible
  pwm: xilinx: Convert to platform remove callback returning void
  pwm: vt8500: Convert to platform remove callback returning void
  pwm: tiehrpwm: Convert to platform remove callback returning void
  pwm: tiecap: Convert to platform remove callback returning void
  pwm: tegra: Convert to platform remove callback returning void
  pwm: sun4i: Convert to platform remove callback returning void
  ...

Pull soundwire updates from Vinod Koul:
 "This features AMD soundwire controller driver, a bunch of Intel
  changes for future platform support, sdw API updates etc:

   - Support for AMD soundwire controller

   - Intel driver updates to support future platforms

   - Core API sdw_nread/nwrite_no_pm updates to handle page boundaries"

* tag 'soundwire-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (38 commits)
  soundwire: intel_auxdevice: improve pm_prepare step
  soundwire: bus: Fix unbalanced pm_runtime_put() causing usage count underflow
  soundwire: intel: don't save hw_params for use in prepare
  soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries
  soundwire: bus: Update kernel doc for no_pm functions
  soundwire: bus: Remove now outdated comments on no_pm IO
  soundwire: stream: uniquify dev_err() logs
  soundwire: stream: remove bus->dev from logs on multiple buses
  soundwire: amd: add pm_prepare callback and pm ops support
  soundwire: amd: handle SoundWire wake enable interrupt
  soundwire: amd: add runtime pm ops for AMD SoundWire manager driver
  soundwire: amd: add SoundWire manager interrupt handling
  soundwire: amd: enable build for AMD SoundWire manager driver
  soundwire: amd: register SoundWire manager dai ops
  soundwire: amd: Add support for AMD Manager driver
  soundwire: export sdw_compute_slave_ports() function
  soundwire: stream: restore cumulative bus bandwidth when compute_params callback failed
  soundwire: bandwidth allocation: Use hweight32() to calculate set bits
  soundwire: qcom: gracefully handle too many ports in DT
  soundwire: qcom: define hardcoded version magic numbers
  ...

Pull phy updates from Vinod Koul:
 "New support:
   - UFS PHY for Qualcomm SA8775p, SM7150
   - PCIe 2 lane phy support for sc8180x and PCIe PHY for SDX65
   - Mediatke hdmi phy support for mt8195
   - rockchip naneng combo phy support for RK358

  Updates:
   - Drop Thunder Bay eMMC PHY driver
   - RC support for PCIe phy for Qualcomm SDX55
   - SGMII support in WIZ driver for J721E
   - PCIe and multilink SGMII PHY support in cadence driver
   - Big pile of platform remove callback returning void conversions"

* tag 'phy-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
  phy: cadence: cdns-dphy-rx: Add common module reset support
  phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E
  dt-bindings: phy: ti: phy-gmii-sel: Add support for J784S4 CPSW9G
  phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()
  phy: cadence: Sierra: Add PCIe + SGMII PHY multilink configuration
  phy: mediatek: add support for phy-mtk-hdmi-mt8195
  phy: phy-mtk-hdmi: Add generic phy configure callback
  dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible
  phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port
  dt-bindings: phy: ti,phy-j721e-wiz: document clock-output-names
  dt-bindings: phy: ti,phy-j721e-wiz: drop assigned-clocks
  dt-bindings: phy: ti,phy-am654-serdes: drop assigned-clocks type
  dt-bindings: phy: cadence-torrent: drop assigned-clocks
  dt-bindings: phy: cadence-sierra: drop assigned-clocks
  phy: rockchip: remove unused hw_to_inno function
  phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
  dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
  phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl
  phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes
  phy: qcom-qmp-ufs: Add SM7150 support
  ...

Pull dmaengine updates from Vinod Koul:
 "New support:

   - Apple admac t8112 device support

   - StarFive JH7110 DMA controller

  Updates:

   - Big pile of idxd updates to support IAA 2.0 device capabilities,
     DSA 2.0 Event Log and completion record faulting features and
     new DSA operations

   - at_xdmac supend & resume updates and driver code cleanup

   - k3-udma supend & resume support

   - k3-psil thread support for J784s4"

* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
  dmaengine: idxd: add per wq PRS disable
  dmaengine: idxd: add pid to exported sysfs attribute for opened file
  dmaengine: idxd: expose fault counters to sysfs
  dmaengine: idxd: add a device to represent the file opened
  dmaengine: idxd: add per file user counters for completion record faults
  dmaengine: idxd: process batch descriptor completion record faults
  dmaengine: idxd: add descs_completed field for completion record
  dmaengine: idxd: process user page faults for completion record
  dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
  dmaengine: idxd: create kmem cache for event log fault items
  dmaengine: idxd: add per DSA wq workqueue for processing cr faults
  dmanegine: idxd: add debugfs for event log dump
  dmaengine: idxd: add interrupt handling for event log
  dmaengine: idxd: setup event log configuration
  dmaengine: idxd: add event log size sysfs attribute
  dmaengine: idxd: make misc interrupt one shot
  dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
  dt-bindings: dma: Drop unneeded quotes
  dmaengine: at_xdmac: align declaration of ret with the rest of variables
  dmaengine: at_xdmac: add a warning message regarding for unpaused channels
  ...

Pull hardware timestamp engine updates from Dipen Patel:
 "The changes for the hte subsystem include:

   - Add Tegra234 HTE provider and relevant DT bindings

   - Update MAINTAINERS file for the HTE subsystem"

* tag 'for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux:
  hte: tegra-194: Use proper includes
  hte: Use device_match_of_node()
  hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
  hte: tegra: fix 'struct of_device_id' build error
  hte: Use of_property_present() for testing DT property presence
  gpio: tegra186: Add Tegra234 hte support
  hte: handle nvidia,gpio-controller property
  hte: Deprecate nvidia,slices property
  hte: Add Tegra234 provider
  hte: Re-phrase tegra API document
  arm64: tegra: Add Tegra234 GTE nodes
  dt-bindings: timestamp: Deprecate nvidia,slices property
  dt-bindings: timestamp: Add Tegra234 support
  MAINTAINERS: Add HTE/timestamp subsystem details

Pull pin control updates from Linus Walleij:
 "Mostly drivers! Nothing special: some new Qualcomm chips as usual, and
  the new NXP S32 and nVidia BlueField-3.

  Core changes:

   - Make a lot of pin controllers with GPIO and irqchips immutable,
     i.e. not living structs, but const structs. This is driving a
     changed initiated by the irqchip maintainers.

  New drivers:

   - New driver for the NXP S32 SoC pin controller

   - As part of a thorough cleanup and restructuring of the
     Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were
     folded into the Mediatek directory and the family is renamed
     "mtmips". The Ralink chips live on as Mediatek MIPS family where
     new variants can be added. As part of this work also the device
     tree bindings were reworked.

   - New subdriver for the Qualcomm SM7150 SoC.

   - New subdriver for the Qualcomm IPQ9574 SoC.

   - New driver for the nVidia BlueField-3 SoC.

   - Support for the Qualcomm PMM8654AU mixed signal circuit GPIO.

   - Support for the Qualcomm PMI632 mixed signal circuit GPIO.

  Improvements:

   - Add some missing pins and generic cleanups on the Renesas r8a779g0
     and r8a779g0 pin controllers. Generic Renesas extension for power
     source selection on several SoCs.

   - Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers

   - Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver.

   - Several device tree binding cleanups as the binding YAML syntax is
     solidifying"

* tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits)
  pinctrl-bcm2835.c: fix race condition when setting gpio dir
  dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2"
  dt-bindings: pinctrl: qcom: Add few missing functions
  pinctrl: qcom: spmi-gpio: Add PMI632 support
  dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
  pinctrl: wpcm450: select MFD_SYSCON
  pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip
  pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip
  pinctrl: qcom spmi-mpp: Convert to immutable irq_chip
  pinctrl: plgpio: Convert to immutable irq_chip
  pinctrl: pistachio: Convert to immutable irq_chip
  pinctrl: pic32: Convert to immutable irq_chip
  pinctrl: sx150x: Convert to immutable irq_chip
  pinctrl: stmfx: Convert to immutable irq_chip
  pinctrl: st: Convert to immutable irq_chip
  pinctrl: mcp23s08: Convert to immutable irq_chip
  pinctrl: equilibrium: Convert to immutable irq_chip
  pinctrl: npcm7xx: Convert to immutable irq_chip
  pinctrl: armada-37xx: Convert to immutable irq_chip
  pinctrl: nsp: Convert to immutable irq_chip
  ...

Pull VFIO updates from Alex Williamson:

 - Expose and allow R/W access to the PCIe DVSEC capability through
   vfio-pci, as we already do with the legacy vendor capability
   (K V P Satyanarayana)

 - Fix kernel-doc issues with structure definitions (Simon Horman)

 - Clarify ordering of operations relative to the kvm-vfio device for
   driver dependencies against the kvm pointer (Yi Liu)

* tag 'vfio-v6.4-rc1' of https://github.com/awilliam/linux-vfio:
  docs: kvm: vfio: Suggest KVM_DEV_VFIO_GROUP_ADD vs VFIO_GROUP_GET_DEVICE_FD ordering
  vfio: correct kdoc for ops structures
  vfio/pci: Add DVSEC PCI Extended Config Capability to user visible list.

Pull AFS updates from David Howells:
 "Three fixes to AFS directory handling:

   - Make sure that afs_read_dir() sees any increase in file size if the
     file unexpectedly changed on the server (e.g. due to another client
     making a change).

   - Make afs_getattr() always return the server's dir file size, not
     the locally edited one, so that pagecache eviction doesn't cause
     the dir file size to change unexpectedly.

   - Prevent afs_read_dir() from getting into an endless loop if the
     server indicates that the directory file size is larger than
     expected"

* tag 'afs-fixes-20230502' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Avoid endless loop if file is larger than expected
  afs: Fix getattr to report server i_size on dirs, not local size
  afs: Fix updating of i_size with dv jump from server

Pull backlight updates from Lee Jones:
 "Fix-ups:
   - Add / improve Device Tree bindings
   - Convert (int) .remove functions to (void) .remove_new
   - Rid 'defined but not used' warnings
   - Remove ineffective casts and pointer stubs
   - Use specifically crafted API for testing DT property presence"

* tag 'backlight-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: as3711: Use of_property_read_bool() for boolean properties
  backlight: hx8357: Use of_property_present() for testing DT property presence
  backlight: arcxcnn_bl: Drop of_match_ptr for ID table
  backlight: lp855x: Mark OF related data as maybe unused
  backlight: sky81452-backlight: Convert to platform remove callback returning void
  backlight: rt4831-backlight: Convert to platform remove callback returning void
  backlight: qcom-wled: Convert to platform remove callback returning void
  backlight: pwm_bl: Convert to platform remove callback returning void
  backlight: mt6370-backlight: Convert to platform remove callback returning void
  backlight: lp8788_bl: Convert to platform remove callback returning void
  backlight: lm3533_bl: Convert to platform remove callback returning void
  backlight: led_bl: Convert to platform remove callback returning void
  backlight: hp680_bl: Convert to platform remove callback returning void
  backlight: da9052_bl: Convert to platform remove callback returning void
  backlight: cr_bllcd: Convert to platform remove callback returning void
  backlight: adp5520_bl: Convert to platform remove callback returning void
  backlight: aat2870_bl: Convert to platform remove callback returning void
  backlight: qcom-wled: Add PMI8950 compatible

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for  Renesas RZ/G2L MTU3

  New Device Support:
   - Add support for Lenovo Yoga Book X90F to Intel CHT WC
   - Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
   - Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
   - Add support for AXP15060 PMIC to X-Powers PMIC collection

  Remove Device Support:
   - Remove support for Samsung 5M8751 and S5M8763 PMIC devices

  New Functionality:
   - Convert deprecated QCOM IRQ Chip to config registers
   - Add support for 32-bit address spaces to Renesas SMUs

  Fix-ups:
   - Make use of APIs / MACROs designed to simplify and demystify
   - Add / improve Device Tree bindings
   - Memory saving struct layout optimisations
   - Remove old / deprecated functionality
   - Factor out unassigned register addresses from ranges
   - Trivial: Spelling fixes, renames and coding style fixes
   - Rid 'defined but not used' warnings
   - Remove ineffective casts and pointer stubs

  Bug Fixes:
   - Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
   - Remove MODULE_*() helpers from non-tristate drivers
   - Do not attempt to use out-of-range memory addresses associated with io_base
   - Provide missing export helpers
   - Fix remap bulk read optimisation fallout
   - Fix memory leak issues in error paths"

* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
  dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
  leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
  dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
  mfd: axp20x: Add support for AXP15060 PMIC
  dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
  counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
  dt-bindings: mfd: dlg,da9063: Document voltage monitoring
  dt-bindings: mfd: stm32: Remove unnecessary blank lines
  dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
  dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
  MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  counter: Add Renesas RZ/G2L MTU3a counter driver
  Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  mfd: Add Renesas RZ/G2L MTU3a core driver
  dt-bindings: timer: Document RZ/G2L MTU3a bindings
  mfd: rsmu_i2c: Convert to i2c's .probe_new() again
  mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
  mfd: dln2: Fix memory leak in dln2_probe()
  mfd: axp20x: Fix axp288 writable-ranges
  ...

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for MediaTek MT6370 LED Indicator
   - Add support for MediaTek MT6370 Flashlight
   - Add support for QCOM PMIC Flash
   - Add support for Rohm BD2606MVV Charge Pump LED

  New Device Support:
   - Add support for PMK8550 PWM to QCOM LPG

  New Functionality:
   - Add support for high resolution PWM to QCOM LPG

  Fix-ups:
   - Kconfig 'depends' and 'select' dependency changes
   - Remove unused / irrelevant includes
   - Remove unnecessary checks (already performed further into the call stack)
   - Trivial: Fix commentary, simplify error messages
   - Rid 'defined but not used' warnings
   - Provide documentation
   - Explicitly provide include files

  Bug Fixes:
   - Mark GPIO LED as BROKEN
   - Fix Kconfig entries
   - Fix various Smatch staticify reports
   - Fix error handling (or a lack there of)"

* tag 'leds-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
  leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  dt-bindings: leds: Add ROHM BD2606MVV LED
  docs: leds: ledtrig-oneshot: Fix spelling mistake
  leds: pwm-multicolor: Simplify an error message
  dt-bindings: leds: Convert PCA9532 to dtschema
  leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM
  leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
  dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
  leds: tca6507: Fix error handling of using fwnode_property_read_string
  leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static
  leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB
  MAINTAINERS: Add entry for LED devices documentation
  Documentation: leds: MT6370: Use bullet lists for timing variables
  Documentation: leds: mt6370: Properly wrap hw_pattern chart
  Documentation: leds: Add MT6370 doc to the toctree
  leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
  docs: leds: Add MT6370 RGB LED pattern document
  leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
  ...

afs_read_dir fetches an amount of data that's based on what the inode
size is thought to be.  If the file on the server is larger than what
was fetched, the code rechecks i_size and retries.  If the local i_size
was not properly updated, this can lead to an endless loop of fetching
i_size from the server and noticing each time that the size is larger on
the server.

If it is known that the remote size is larger than i_size, bump up the
fetch size to that size.

Fixes: f3ddee8d ("afs: Fix directory handling")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org

Fix afs_getattr() to report the server's idea of the file size of a
directory rather than the local size.  The local size may differ as we edit
the local copy to avoid having to redownload it and we may end up with a
differently structured blob of a different size.

However, if the directory is discarded from the pagecache we then download
it again and the user may see the directory file size apparently change.

Fixes: 63a4681f ("afs: Locally edit directory data for mkdir/create/unlink/...")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

If the data version returned from the server is larger than expected,
the local data is invalidated, but we may still want to note the remote
file size.

Since we're setting change_size, we have to also set data_changed
for the i_size to get updated.

Fixes: 3f4aa981 ("afs: Fix EOF corruption")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org

Pull input updates from Dmitry Torokhov:

 - a new driver for Novatek touch controllers

 - a new driver for power button for NXP BBNSM

 - a skeleton KUnit tests for the input core

 - improvements to Xpad game controller driver to support more devices

 - improvements to edt-ft5x06, hideep and other drivers

* tag 'input-for-v6.4-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits)
  Revert "Input: xpad - fix support for some third-party controllers"
  dt-bindings: input: pwm-beeper: convert to dt schema
  Input: xpad - fix PowerA EnWired Controller guide button
  Input: xpad - add constants for GIP interface numbers
  Input: synaptics-rmi4 - fix function name in kerneldoc
  Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe
  Input: edt-ft5x06 - select REGMAP_I2C
  Input: melfas_mip4 - report palm touches
  Input: cma3000_d0x - remove unneeded code
  Input: edt-ft5x06 - calculate points data length only once
  Input: edt-ft5x06 - unify the crc check
  Input: edt-ft5x06 - convert to use regmap API
  Input: edt-ft5x06 - don't print error messages with dev_dbg()
  Input: edt-ft5x06 - remove code duplication
  Input: edt-ft5x06 - don't recalculate the CRC
  Input: edt-ft5x06 - add spaces to ensure format specification
  Input: edt-ft5x06 - remove unnecessary blank lines
  Input: edt-ft5x06 - fix indentation
  Input: tsc2007 - enable cansleep pendown GPIO
  Input: Add KUnit tests for some of the input core helper functions
  ...

Prepare input updates for 6.4 merge window.

This reverts commit db7220c4 because it
causes crashes when trying to dereference xpad->dev->dev in xpad_probe()
which has not been set up yet.

Reported-by: syzbot+a3f758b8d8cb7e49afec@syzkaller.appspotmail.com
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://groups.google.com/g/syzkaller-bugs/c/iMhTgpGuIbMSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull kvm updates from Paolo Bonzini:
 "s390:

   - More phys_to_virt conversions

   - Improvement of AP management for VSIE (nested virtualization)

  ARM64:

   - Numerous fixes for the pathological lock inversion issue that
     plagued KVM/arm64 since... forever.

   - New framework allowing SMCCC-compliant hypercalls to be forwarded
     to userspace, hopefully paving the way for some more features being
     moved to VMMs rather than be implemented in the kernel.

   - Large rework of the timer code to allow a VM-wide offset to be
     applied to both virtual and physical counters as well as a
     per-timer, per-vcpu offset that complements the global one. This
     last part allows the NV timer code to be implemented on top.

   - A small set of fixes to make sure that we don't change anything
     affecting the EL1&0 translation regime just after having having
     taken an exception to EL2 until we have executed a DSB. This
     ensures that speculative walks started in EL1&0 have completed.

   - The usual selftest fixes and improvements.

  x86:

   - Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
     enabled, and by giving the guest control of CR0.WP when EPT is
     enabled on VMX (VMX-only because SVM doesn't support per-bit
     controls)

   - Add CR0/CR4 helpers to query single bits, and clean up related code
     where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
     return as a bool

   - Move AMD_PSFD to cpufeatures.h and purge KVM's definition

   - Avoid unnecessary writes+flushes when the guest is only adding new
     PTEs

   - Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
     optimizations when emulating invalidations

   - Clean up the range-based flushing APIs

   - Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
     single A/D bit using a LOCK AND instead of XCHG, and skip all of
     the "handle changed SPTE" overhead associated with writing the
     entire entry

   - Track the number of "tail" entries in a pte_list_desc to avoid
     having to walk (potentially) all descriptors during insertion and
     deletion, which gets quite expensive if the guest is spamming
     fork()

   - Disallow virtualizing legacy LBRs if architectural LBRs are
     available, the two are mutually exclusive in hardware

   - Disallow writes to immutable feature MSRs (notably
     PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features

   - Overhaul the vmx_pmu_caps selftest to better validate
     PERF_CAPABILITIES

   - Apply PMU filters to emulated events and add test coverage to the
     pmu_event_filter selftest

   - AMD SVM:
       - Add support for virtual NMIs
       - Fixes for edge cases related to virtual interrupts

   - Intel AMX:
       - Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
         XTILE_DATA is not being reported due to userspace not opting in
         via prctl()
       - Fix a bug in emulation of ENCLS in compatibility mode
       - Allow emulation of NOP and PAUSE for L2
       - AMX selftests improvements
       - Misc cleanups

  MIPS:

   - Constify MIPS's internal callbacks (a leftover from the hardware
     enabling rework that landed in 6.3)

  Generic:

   - Drop unnecessary casts from "void *" throughout kvm_main.c

   - Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
     struct size by 8 bytes on 64-bit kernels by utilizing a padding
     hole

  Documentation:

   - Fix goof introduced by the conversion to rST"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
  KVM: s390: pci: fix virtual-physical confusion on module unload/load
  KVM: s390: vsie: clarifications on setting the APCB
  KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
  KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
  KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
  KVM: selftests: Test the PMU event "Instructions retired"
  KVM: selftests: Copy full counter values from guest in PMU event filter test
  KVM: selftests: Use error codes to signal errors in PMU event filter test
  KVM: selftests: Print detailed info in PMU event filter asserts
  KVM: selftests: Add helpers for PMC asserts in PMU event filter test
  KVM: selftests: Add a common helper for the PMU event filter guest code
  KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
  KVM: arm64: vhe: Drop extra isb() on guest exit
  KVM: arm64: vhe: Synchronise with page table walker on MMU update
  KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
  KVM: arm64: nvhe: Synchronise with page table walker on TLBI
  KVM: arm64: Handle 32bit CNTPCTSS traps
  KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
  KVM: arm64: vgic: Don't acquire its_lock before config_lock
  KVM: selftests: Add test to verify KVM's supported XCR0
  ...

Pull OpenRISC updates from Stafford Horne:
 "Two things for OpenRISC this cycle:

   - Small cleanup for device tree cpu iteration from Rob Herring

   - Add support for storing, restoring and accessing user space FPU
     state, to allow for libc to support the FPU on OpenRISC"

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Add floating point regset
  openrisc: Support floating point user api
  openrisc: Support storing and restoring fpu state
  openrisc: Properly store r31 to pt_regs on unhandled exceptions
  openrisc: Use common of_get_cpu_node() instead of open-coding

Pull RTC updates from Alexandre Belloni:
 "Not much this cycle, there is the conversion to remove_new and many
  small fixes in drivers:

  Subsystem:
   - Convert to platform remove callback returning void

  Drivers:
   - meson-vrtc: fix a firmware display issue"

* tag 'rtc-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (53 commits)
  rtc: armada38x: use devm_platform_ioremap_resource_byname()
  rtc: sunplus: use devm_platform_ioremap_resource_byname()
  rtc: jz4740: Make sure clock provider gets removed
  rtc: k3: handle errors while enabling wake irq
  rtc: meson-vrtc: Use ktime_get_real_ts64() to get the current time
  dt-bindings: rtc: Drop unneeded quotes
  rtc: pcf8523: remove unnecessary OR operation
  rtc: pcf8523: fix coding-style issues
  rtc: ds1390: mark OF related data as maybe unused
  rtc: omap: include header for omap_rtc_power_off_program prototype
  rtc: sun6i: Use of_property_present() for testing DT property presence
  rtc: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
  rtc: zynqmp: Convert to platform remove callback returning void
  rtc: xgene: Convert to platform remove callback returning void
  rtc: wm8350: Convert to platform remove callback returning void
  rtc: vt8500: Convert to platform remove callback returning void
  rtc: twl: Convert to platform remove callback returning void
  rtc: tps6586x: Convert to platform remove callback returning void
  rtc: tegra: Convert to platform remove callback returning void
  rtc: sunplus: Convert to platform remove callback returning void
  ...

Pull i3c updates from Alexandre Belloni:
 "Subsystem:
   - OF alias bus numbering
   - convert to platform remove callback returning void

  New driver:
   - AST2600 controller, based on Synopsys DesignWare IP

  Driver update:
   - dw: add infrastructure to support different platform integrations"

* tag 'i3c/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: ast2600: set variable ast2600_i3c_ops storage-class-specifier to static
  i3c: ast2600: fix register setting for 545 ohm pullups
  i3c: ast2600: enable IBI support
  i3c: dw: Add a platform facility for IBI PEC workarounds
  i3c: dw: Add support for in-band interrupts
  i3c: dw: Turn DAT array entry into a struct
  i3c: dw: Create a generic fifo read function
  i3c: Allow OF-alias-based persistent bus numbering
  i3c: ast2600: Add AST2600 platform-specific driver
  dt-bindings: i3c: Add AST2600 i3c controller
  i3c: dw: Add infrastructure for platform-specific implementations
  i3c: dw: use bus mode rather than device reg for conditional tCAS setting
  i3c: dw: Return the length from a read priv_xfer
  i3c: svc: Convert to platform remove callback returning void
  i3c: mipi-i3c-hci: Convert to platform remove callback returning void
  i3c: cdns: Convert to platform remove callback returning void
  i3c: dw: Convert to platform remove callback returning void
  i3c: Make i3c_master_unregister() return void
  i3c: dw: drop of_match_ptr for ID table
  i3c: Correct reference to the I²C device data type

Pull ext4 fixes from Ted Ts'o:
 "Some ext4 regression and bug fixes"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: clean up error handling in __ext4_fill_super()
  ext4: reflect error codes from ext4_multi_mount_protect() to its callers
  ext4: fix lost error code reporting in __ext4_fill_super()
  ext4: fix unused iterator variable warnings
  ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline
  ext4: fix i_disksize exceeding i_size problem in paritally written case

Pull cifs fixes from Steve French:

 - deferred close fix for an important case when cached file should be
   closed immediately

 - two fixes for missing locks

 - eight minor cleanup

* tag '6.4-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  smb3: move some common open context structs to smbfs_common
  smb3: make query_on_disk_id open context consistent and move to common code
  SMB3.1.1: add new tree connect ShareFlags
  cifs: missing lock when updating session status
  SMB3: Close deferred file handles in case of handle lease break
  SMB3: Add missing locks to protect deferred close file list
  cifs: Avoid a cast in add_lease_context()
  cifs: Simplify SMB2_open_init()
  cifs: Simplify SMB2_open_init()
  cifs: Simplify SMB2_open_init()

Merge tag 'tpmdd-v6.4-rc1-fix-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fix from Jarkko Sakkinen:
 "This fixes a critical bug in my first pull request.

  I fixed the cherry pick issue and tested with real hardare and
  libvirt/qemu plus swtpm"

* tag 'tpmdd-v6.4-rc1-fix-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Re-enable TPM chip boostrapping non-tpm_tis TPM drivers

smatch reports
drivers/i3c/master/ast2600-i3c-master.c:121:34: warning: symbol
  'ast2600_i3c_ops' was not declared. Should it be static?

This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230429134601.2688558-1-trix@redhat.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Pull iommu updates from Joerg Roedel:

 - Convert to platform remove callback returning void

 - Extend changing default domain to normal group

 - Intel VT-d updates:
     - Remove VT-d virtual command interface and IOASID
     - Allow the VT-d driver to support non-PRI IOPF
     - Remove PASID supervisor request support
     - Various small and misc cleanups

 - ARM SMMU updates:
     - Device-tree binding updates:
         * Allow Qualcomm GPU SMMUs to accept relevant clock properties
         * Document Qualcomm 8550 SoC as implementing an MMU-500
         * Favour new "qcom,smmu-500" binding for Adreno SMMUs

     - Fix S2CR quirk detection on non-architectural Qualcomm SMMU
       implementations

     - Acknowledge SMMUv3 PRI queue overflow when consuming events

     - Document (in a comment) why ATS is disabled for bypass streams

 - AMD IOMMU updates:
     - 5-level page-table support
     - NUMA awareness for memory allocations

 - Unisoc driver: Support for reattaching an existing domain

 - Rockchip driver: Add missing set_platform_dma_ops callback

 - Mediatek driver: Adjust the dma-ranges

 - Various other small fixes and cleanups

* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
  iommu: Remove iommu_group_get_by_id()
  iommu: Make iommu_release_device() static
  iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
  iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
  iommu/vt-d: Remove BUG_ON in map/unmap()
  iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
  iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
  iommu/vt-d: Remove BUG_ON on checking valid pfn range
  iommu/vt-d: Make size of operands same in bitwise operations
  iommu/vt-d: Remove PASID supervisor request support
  iommu/vt-d: Use non-privileged mode for all PASIDs
  iommu/vt-d: Remove extern from function prototypes
  iommu/vt-d: Do not use GFP_ATOMIC when not needed
  iommu/vt-d: Remove unnecessary checks in iopf disabling path
  iommu/vt-d: Move PRI handling to IOPF feature path
  iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
  iommu/vt-d: Move iopf code from SVA to IOPF enabling path
  iommu/vt-d: Allow SVA with device-specific IOPF
  dmaengine: idxd: Add enable/disable device IOPF feature
  arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
  ...

Pull compute express link updates from Dan Williams:
 "DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
  blessing, and the CXL core continues to mature its media management
  capabilities with support for listing and injecting media errors. Some
  late fixes that missed v6.3-final are also included:

   - Refactor the DOE infrastructure (Data Object Exchange
     PCI-config-cycle mailbox) to be a facility of the PCI core rather
     than the CXL core.

     This is foundational for upcoming support for PCI
     device-attestation and PCIe / CXL link encryption.

   - Add support for retrieving and injecting poison for CXL memory
     expanders.

     This enabling uses trace-events to convey CXL media error records
     to user tooling. It includes translation of device-local addresses
     (DPA) to system physical addresses (SPA) and their corresponding
     CXL region.

   - Fixes for decoder enumeration that missed v6.3-final

   - Miscellaneous fixups"

* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
  cxl/test: Add mock test for set_timestamp
  cxl/mbox: Update CMD_RC_TABLE
  tools/testing/cxl: Require CONFIG_DEBUG_FS
  tools/testing/cxl: Add a sysfs attr to test poison inject limits
  tools/testing/cxl: Use injected poison for get poison list
  tools/testing/cxl: Mock the Clear Poison mailbox command
  tools/testing/cxl: Mock the Inject Poison mailbox command
  cxl/mem: Add debugfs attributes for poison inject and clear
  cxl/memdev: Trace inject and clear poison as cxl_poison events
  cxl/memdev: Warn of poison inject or clear to a mapped region
  cxl/memdev: Add support for the Clear Poison mailbox command
  cxl/memdev: Add support for the Inject Poison mailbox command
  tools/testing/cxl: Mock support for Get Poison List
  cxl/trace: Add an HPA to cxl_poison trace events
  cxl/region: Provide region info to the cxl_poison trace event
  cxl/memdev: Add trigger_poison_list sysfs attribute
  cxl/trace: Add TRACE support for CXL media-error records
  cxl/mbox: Add GET_POISON_LIST mailbox command
  cxl/mbox: Initialize the poison state
  cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
  ...

Pull s390 updates from Vasily Gorbik:

 - Add support for stackleak feature. Also allow specifying
   architecture-specific stackleak poison function to enable faster
   implementation. On s390, the mvc-based implementation helps decrease
   typical overhead from a factor of 3 to just 25%

 - Convert all assembler files to use SYM* style macros, deprecating the
   ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS

 - Improve KASLR to also randomize module and special amode31 code base
   load addresses

 - Rework decompressor memory tracking to support memory holes and
   improve error handling

 - Add support for protected virtualization AP binding

 - Add support for set_direct_map() calls

 - Implement set_memory_rox() and noexec module_alloc()

 - Remove obsolete overriding of mem*() functions for KASAN

 - Rework kexec/kdump to avoid using nodat_stack to call purgatory

 - Convert the rest of the s390 code to use flexible-array member
   instead of a zero-length array

 - Clean up uaccess inline asm

 - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE

 - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
   DEBUG_FORCE_FUNCTION_ALIGN_64B

 - Resolve last_break in userspace fault reports

 - Simplify one-level sysctl registration

 - Clean up branch prediction handling

 - Rework CPU counter facility to retrieve available counter sets just
   once

 - Other various small fixes and improvements all over the code

* tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits)
  s390/stackleak: provide fast __stackleak_poison() implementation
  stackleak: allow to specify arch specific stackleak poison function
  s390: select ARCH_USE_SYM_ANNOTATIONS
  s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
  s390: wire up memfd_secret system call
  s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
  s390/mm: use BIT macro to generate SET_MEMORY bit masks
  s390/relocate_kernel: adjust indentation
  s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
  s390/entry: use SYM* macros instead of ENTRY(), etc.
  s390/purgatory: use SYM* macros instead of ENTRY(), etc.
  s390/kprobes: use SYM* macros instead of ENTRY(), etc.
  s390/reipl: use SYM* macros instead of ENTRY(), etc.
  s390/head64: use SYM* macros instead of ENTRY(), etc.
  s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
  s390/mcount: use SYM* macros instead of ENTRY(), etc.
  s390/crc32le: use SYM* macros instead of ENTRY(), etc.
  s390/crc32be: use SYM* macros instead of ENTRY(), etc.
  s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
  s390/amode31: use SYM* macros instead of ENTRY(), etc.
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Refactor scripts/kallsyms to make it faster and easier to maintain

 - Clean up menuconfig

 - Provide Clang with hard-coded target triple instead of CROSS_COMPILE

 - Use -z pack-relative-relocs flags instead of --use-android-relr-tags
   for arm64 CONFIG_RELR

 - Add srcdeb-pkg target to build only a Debian source package

 - Add KDEB_SOURCE_COMPRESS option to specify the compression for a
   Debian source package

 - Misc cleanups and fixes

* tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: deb-pkg: specify targets in debian/rules as .PHONY
  sparc: unify sparc32/sparc64 archhelp
  kbuild: rpm-pkg: remove kernel-drm PROVIDES
  kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression
  kbuild: add srcdeb-pkg target
  Makefile: use -z pack-relative-relocs
  kbuild: clang: do not use CROSS_COMPILE for target triple
  kconfig: menuconfig: reorder functions to remove forward declarations
  kconfig: menuconfig: remove unused M_EVENT macro
  kconfig: menuconfig: remove OLD_NCURSES macro
  kbuild: builddeb: Eliminate debian/arch use
  scripts/kallsyms: update the usage in the comment block
  scripts/kallsyms: decrease expand_symbol() / cleanup_symbol_name() calls
  scripts/kallsyms: change the output order
  scripts/kallsyms: move compiler-generated symbol patterns to mksysmap
  scripts/kallsyms: exclude symbols generated by itself dynamically
  scripts/mksysmap: use sed with in-line comments
  scripts/mksysmap: remove comments described in nm(1)
  scripts/kallsyms: remove redundant code for omitting U and N
  kallsyms: expand symbol name into comment for debugging

Pull rust updates from Miguel Ojeda
 "More additions to the Rust core. Importantly, this adds the pin-init
  API, which will be used by other abstractions, such as the
  synchronization ones added here too:

   - pin-init API: a solution for the safe pinned initialization
     problem.

     This allows to reduce the need for 'unsafe' code in the kernel when
     dealing with data structures that require a stable address. Commit
     90e53c5e ("rust: add pin-init API core") contains a nice
     introduction -- here is an example of how it looks like:

        #[pin_data]
        struct Example {
            #[pin]
            value: Mutex<u32>,

            #[pin]
            value_changed: CondVar,
        }

        impl Example {
            fn new() -> impl PinInit<Self> {
                pin_init!(Self {
                    value <- new_mutex!(0),
                    value_changed <- new_condvar!(),
                })
            }
        }

        // In a `Box`.
        let b = Box::pin_init(Example::new())?;

        // In the stack.
        stack_pin_init!(let s = Example::new());

   - 'sync' module:

     New types 'LockClassKey' ('struct lock_class_key'), 'Lock',
     'Guard', 'Mutex' ('struct mutex'), 'SpinLock' ('spinlock_t'),
     'LockedBy' and 'CondVar' (uses 'wait_queue_head_t'), plus macros
     such as 'static_lock_class!' and 'new_spinlock!'.

     In particular, 'Lock' and 'Guard' are generic implementations that
     contain code that is common to all locks. Then, different backends
     (the new 'Backend' trait) are implemented and used to define types
     like 'Mutex':

        type Mutex<T> = Lock<T, MutexBackend>;

     In addition, new methods 'assume_init()', 'init_with()' and
     'pin_init_with()' for 'UniqueArc<MaybeUninit<T>>' and 'downcast()'
     for 'Arc<dyn Any + Send + Sync>'; as well as 'Debug' and 'Display'
     implementations for 'Arc' and 'UniqueArc'. Reduced stack usage of
     'UniqueArc::try_new_uninit()', too.

   - 'types' module:

     New trait 'AlwaysRefCounted' and new type 'ARef' (an owned
     reference to an always-reference-counted object, meant to be used
     in wrappers for C types that have their own ref counting
     functions).

     Moreover, new associated functions 'raw_get()' and 'ffi_init()' for
     'Opaque'.

   - New 'task' module with a new type 'Task' ('struct task_struct'),
     and a new macro 'current!' to safely get a reference to the current
     one.

   - New 'ioctl' module with new '_IOC*' const functions (equivalent to
     the C macros).

   - New 'uapi' crate, intended to be accessible by drivers directly.

   - 'macros' crate: new 'quote!' macro (similar to the one provided in
     userspace by the 'quote' crate); and the 'module!' macro now allows
     specifying multiple module aliases.

   - 'error' module:

     New associated functions for the 'Error' type, such as
     'from_errno()' and new functions such as 'to_result()'.

   - 'alloc' crate:

     More fallible 'Vec' methods: 'try_resize` and
     'try_extend_from_slice' and the infrastructure (imported from the
     Rust standard library) they need"

* tag 'rust-6.4' of https://github.com/Rust-for-Linux/linux: (44 commits)
  rust: ioctl: Add ioctl number manipulation functions
  rust: uapi: Add UAPI crate
  rust: sync: introduce `CondVar`
  rust: lock: add `Guard::do_unlocked`
  rust: sync: introduce `LockedBy`
  rust: introduce `current`
  rust: add basic `Task`
  rust: introduce `ARef`
  rust: lock: introduce `SpinLock`
  rust: lock: introduce `Mutex`
  rust: sync: introduce `Lock` and `Guard`
  rust: sync: introduce `LockClassKey`
  MAINTAINERS: add Benno Lossin as Rust reviewer
  rust: init: broaden the blanket impl of `Init`
  rust: sync: add functions for initializing `UniqueArc<MaybeUninit<T>>`
  rust: sync: reduce stack usage of `UniqueArc::try_new_uninit`
  rust: types: add `Opaque::ffi_init`
  rust: prelude: add `pin-init` API items to prelude
  rust: init: add `Zeroable` trait and `init::zeroed` function
  rust: init: add `stack_pin_init!` macro
  ...

Pull EFI updates from Ard Biesheuvel:

 - relocate the LoongArch kernel if the preferred address is already
   occupied

 - implement BTI annotations for arm64 EFI stub and zboot images

 - clean up arm64 zboot Kbuild rules for injecting the kernel code size

* tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/zboot: arm64: Grab code size from ELF symbol in payload
  efi/zboot: arm64: Inject kernel code size symbol into the zboot payload
  efi/zboot: Set forward edge CFI compat header flag if supported
  efi/zboot: Add BSS padding before compression
  arm64: efi: Enable BTI codegen and add PE/COFF annotation
  efi/pe: Import new BTI/IBT header flags from the spec
  efi/loongarch: Reintroduce efi_relocate_kernel() to relocate kernel

Pull power supply and reset updates from Sebastian Reichel:

 - power-supply core support for automatic handling of constant battery
   data supplied by firmware

 - generic-adc-battery: major cleanup

 - axp288_charger: fix ACPI issues on x86 Android tablets

 - rk817: cleanup and fix handling for low state of charge

* tag 'for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (26 commits)
  power: supply: rk817: Fix low SOC bugs
  power: supply: rk817: Drop unneeded debugging code
  power: supply: axp288_charger: Use alt usb-id extcon on some x86 android tablets
  power: supply: generic-adc-battery: style fixes
  power: supply: generic-adc-battery: improve error message
  power: supply: generic-adc-battery: update copyright info
  power: supply: generic-adc-battery: add DT support
  power: supply: generic-adc-battery: add temperature support
  power: supply: generic-adc-battery: simplify read_channel logic
  power: supply: generic-adc-battery: use simple-battery API
  power: supply: generic-adc-battery: drop memory alloc error message
  power: supply: generic-adc-battery: drop charge now support
  power: supply: generic-adc-battery: drop jitter delay support
  power: supply: generic-adc-battery: fix unit scaling
  power: supply: generic-adc-battery: convert to managed resources
  power: supply: core: auto-exposure of simple-battery data
  dt-bindings: power: supply: adc-battery: add binding
  power: supply: bq256xx: Support to disable charger
  power: supply: charger-manager: Use of_property_read_bool() for boolean properties
  power: reset: qcom-pon: drop of_match_ptr for ID table
  ...

Pull clk updates from Stephen Boyd:
 "Nothing looks out of the ordinary in this batch of clk driver updates.

  There are a couple patches to the core clk framework, but they're all
  basically cleanups or debugging aids. The driver updates and new
  additions are dominated in the diffstat by Qualcomm and MediaTek
  drivers. Qualcomm gained a handful of new drivers for various SoCs,
  and MediaTek gained a bunch of drivers for MT8188. The MediaTek
  drivers are being modernized as well, so there are updates all over
  that vendor's clk drivers. There's also a couple other new clk drivers
  in here, for example the Starfive JH7110 SoC support is added.

  Outside of the two major SoC vendors though, we have the usual
  collection of non-critical fixes and cleanups to various clk drivers.
  It's good to see that we're getting more cleanups and modernization
  patches. Maybe one day we'll be able to properly split clk providers
  from clk consumers.

  Core:
   - Print an informational message before disabling unused clks

  New Drivers:
   - BCM63268 timer clock and reset controller
   - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
     MT8195 SoCs
   - Mediatek MT8188 SoC clk drivers
   - Clock driver for Sunplus SP7021 SoC
   - Clk driver support for Loongson-2 SoCs
   - Clock driver for Skyworks Si521xx I2C PCIe clock generators
   - Initial Starfive JH7110 clk/reset support
   - Global clock controller drivers for Qualcomm SM7150, IPQ9574,
     MSM8917 and IPQ5332 SoCs
   - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
     SoCs

  Updates:
   - Shrink size of clk_fractional_divider a little
   - Convert various clk drivers to devm_of_clk_add_hw_provider()
   - Convert platform clk drivers to remove_new()
   - Converted most Mediatek clock drivers to struct platform_driver
   - MediaTek clock drivers can be built as modules
   - Reimplement Loongson-1 clk driver with DT support
   - Migrate socfpga clk driver to of_clk_add_hw_provider()
   - Support for i3c clks on Aspeed ast2600 SoCs
   - Add clock generic devm_clk_hw_register_gate_parent_data
   - Add audiomix block control for i.MX8MP
   - Add support for determine_rate to i.MX composite-8m
   - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
   - Provide clock name in error message for clk-gpr-mux on get parent
     failure
   - Drop duplicate imx_clk_mux_flags macro
   - Register the i.MX8MP Media Disp2 Pix clock as bus clock
   - Add Media LDB root clock to i.MX8MP
   - Make i.MX8MP nand_usdhc_bus clock as non-critical
   - Fix the rate table for i.MX fracn-gppll
   - Disable HW control for the fracn-gppll in order to be controlled by
     register write
   - Add support for interger PLL in fracn-gppll
   - Add mcore_booted module parameter to i.MX93 provider
   - Add NIC, A55 and ARM PLL clocks to i.MX93
   - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
   - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
     to get more accurate clock rates
   - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
   - Update some of the i.MX critical clocks flags to allow glitchless
     on-the-fly rate change.
   - Add I2C5 clock on Renesas R-Car V3H
   - Exynos850: Add CMU_G3D clock controller for the Mali GPU
   - Extract Exynos5433 (ARM64) clock controller power management code
     to common driver parts
   - Exynos850: make PMU_ALIVE_PCLK clock critical
   - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
     Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
     V4H
   - Add video capture (VIN) clocks on Renesas R-Car V3H
   - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
   - Support for Stromer Plus PLL on Qualcomm IPQ5332
   - Add a missing reset to Qualcomm QCM2290
   - Migrate Qualcomm IPQ4019 to clk_parent_data
   - Make USB GDSCs enter retention state when disabled on Qualcomm
     SM6375, MSM8996 and MSM8998 SoCs
   - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
   - Add two EMAC GDSCs on Qualcomm SC8280XP
   - Use shared rcg clk ops in Qualcomm SM6115 GCC
   - Park Qualcomm SM8350 PCIe PIPE clks when disabled
   - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
   - Add missing XO clocks to Qualcomm MSM8226 and MSM8974
   - Convert some Qualcomm clk DT bindings to YAML
   - Reparenting fix for the clock supplying camera modules on Rockchip
     rk3399
   - Mark more critical (bus-)clocks on Rockchip rk3588"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
  clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
  clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
  clk: rockchip: rk3588: make gate linked clocks critical
  clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
  clk: qcom: add the GPUCC driver for sa8775p
  dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
  clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
  clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
  clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
  dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
  clk: starfive: Avoid casting iomem pointers
  clk: microchip: fix potential UAF in auxdev release callback
  clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
  clk: mediatek: fhctl: Mark local variables static
  clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
  clk: uniphier: Use managed `of_clk_add_hw_provider()`
  clk: si5351: Use managed `of_clk_add_hw_provider()`
  clk: si570: Use managed `of_clk_add_hw_provider()`
  clk: si514: Use managed `of_clk_add_hw_provider()`
  clk: lmk04832: Use managed `of_clk_add_hw_provider()`
  ...

Pull rdma updates from Jason Gunthorpe:
 "Usual wide collection of unrelated items in drivers:

   - Driver bug fixes and treewide cleanups in hfi1, siw, qib, mlx5,
     rxe, usnic, usnic, bnxt_re, ocrdma, iser:
       - remove unnecessary NULL checks
       - kmap obsolescence
       - pci_enable_pcie_error_reporting() obsolescence
       - unused variables and macros
       - trace event related warnings
       - casting warnings

   - Code cleanups for irdm and erdma

   - EFA reporting of 128 byte PCIe TLP support

   - mlx5 more agressively uses the out of order HW feature

   - Big rework of how state machines and tasks work in rxe

   - Fix a syzkaller found crash netdev refcount leak in siw

   - bnxt_re revises their HW description header

   - Congestion control for bnxt_re

   - Use mmu_notifiers more safely in hfi1

   - mlx5 gets better support for PCIe relaxed ordering inside VMs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (81 commits)
  RDMA/efa: Add rdma write capability to device caps
  RDMA/mlx5: Use correct device num_ports when modify DC
  RDMA/irdma: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() call
  RDMA/rxe: Fix spinlock recursion deadlock on requester
  RDMA/mlx5: Fix flow counter query via DEVX
  RDMA/rxe: Protect QP state with qp->state_lock
  RDMA/rxe: Move code to check if drained to subroutine
  RDMA/rxe: Remove qp->req.state
  RDMA/rxe: Remove qp->comp.state
  RDMA/rxe: Remove qp->resp.state
  RDMA/mlx5: Allow relaxed ordering read in VFs and VMs
  net/mlx5: Update relaxed ordering read HCA capabilities
  RDMA/mlx5: Check pcie_relaxed_ordering_enabled() in UMR
  RDMA/mlx5: Remove pcie_relaxed_ordering_enabled() check for RO write
  RDMA: Add ib_virt_dma_to_page()
  RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"
  RDMA/irdma: Slightly optimize irdma_form_ah_cm_frame()
  RDMA/rxe: Fix incorrect TASKLET_STATE_SCHED check in rxe_task.c
  IB/hfi1: Place struct mmu_rb_handler on cache line start
  IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests
  ...

Pull ksmbd server updates from Steve French:

 - SMB3.1.1 negotiate context fixes and cleanup

 - new lock_rename_child VFS helper

 - ksmbd fix to avoid unlink race and to use the new VFS helper to avoid
   rename race

* tag '6.4-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix racy issue from using ->d_parent and ->d_name
  ksmbd: remove unused compression negotiate ctx packing
  ksmbd: avoid duplicate negotiate ctx offset increments
  ksmbd: set NegotiateContextCount once instead of every inc
  fs: introduce lock_rename_child() helper
  ksmbd: remove internal.h include

Pull nfsd updates from Chuck Lever:
 "The big ticket item for this release is that support for RPC-with-TLS
  [RFC 9289] has been added to the Linux NFS server.

  The goal is to provide a simple-to-deploy, low-overhead in-transit
  confidentiality and peer authentication mechanism. It can supplement
  NFS Kerberos and it can protect the use of legacy non-cryptographic
  user authentication flavors such as AUTH_SYS. The TLS Record protocol
  is handled entirely by kTLS, meaning it can use either software
  encryption or offload encryption to smart NICs.

  Aside from that, work continues on improving NFSD's open file cache.
  Among the many clean-ups in that area is a patch to convert the
  rhashtable to use the list-hashing version of that data structure"

* tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
  NFSD: Handle new xprtsec= export option
  SUNRPC: Support TLS handshake in the server-side TCP socket code
  NFSD: Clean up xattr memory allocation flags
  NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop
  SUNRPC: Clear rq_xid when receiving a new RPC Call
  SUNRPC: Recognize control messages in server-side TCP socket code
  SUNRPC: Be even lazier about releasing pages
  SUNRPC: Convert svc_xprt_release() to the release_pages() API
  SUNRPC: Relocate svc_free_res_pages()
  nfsd: simplify the delayed disposal list code
  SUNRPC: Ignore return value of ->xpo_sendto
  SUNRPC: Ensure server-side sockets have a sock->file
  NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor()
  sunrpc: simplify two-level sysctl registration for svcrdma_parm_table
  SUNRPC: return proper error from get_expiry()
  lockd: add some client-side tracepoints
  nfs: move nfs_fhandle_hash to common include file
  lockd: server should unlock lock if client rejects the grant
  lockd: fix races in client GRANTED_MSG wait logic
  lockd: move struct nlm_wait to lockd.h
  ...

Pull NFS client updates from Anna Schumaker:
 "New Features:

   - Convert the readdir path to use folios

   - Convert the NFS fscache code to use netfs

  Bugfixes and Cleanups:

   - Always send a RECLAIM_COMPLETE after establishing a lease

   - Simplify sysctl registrations and other cleanups

   - Handle out-of-order write replies on NFS v3

   - Have sunrpc call_bind_status use standard hard/soft task semantics

   - Other minor cleanups"

* tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.2: Rework scratch handling for READ_PLUS
  NFS: Cleanup unused rpc_clnt variable
  NFS: set varaiable nfs_netfs_debug_id storage-class-specifier to static
  SUNRPC: remove the maximum number of retries in call_bind_status
  NFS: Convert readdir page array functions to use a folio
  NFS: Convert the readdir array-of-pages into an array-of-folios
  NFSv3: handle out-of-order write replies.
  NFS: Remove fscache specific trace points and NFS_INO_FSCACHE bit
  NFS: Remove all NFSIOS_FSCACHE counters due to conversion to netfs API
  NFS: Convert buffered read paths to use netfs when fscache is enabled
  NFS: Configure support for netfs when NFS fscache is configured
  NFS: Rename readpage_async_filler to nfs_read_add_folio
  sunrpc: simplify one-level sysctl registration for debug_table
  sunrpc: move sunrpc_table and proc routines above
  sunrpc: simplify one-level sysctl registration for xs_tunables_table
  sunrpc: simplify one-level sysctl registration for xr_tunables_table
  nfs: simplify two-level sysctl registration for nfs_cb_sysctls
  nfs: simplify two-level sysctl registration for nfs4_cb_sysctls
  lockd: simplify two-level sysctl registration for nlm_sysctls
  NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease

Pull ntfs3 updates from Konstantin Komarov:
 "New code:

   - add missed "nocase" in ntfs_show_options

   - extend information on failures/errors

   - small optimizations

  Fixes:

   - some logic errors

   - some dead code was removed

   - code is refactored and reformatted according to the new version of
     clang-format

  Code removal:

   - 'noacsrules' option.

     Currently, this option does not work properly, and its use leads to
     unstable results. If we figure out how to implement it without
     errors, we will add it later

   - writepage"

* tag 'ntfs3_for_6.4' of https://github.com/Paragon-Software-Group/linux-ntfs3: (30 commits)
  fs/ntfs3: Fix root inode checking
  fs/ntfs3: Print details about mount fails
  fs/ntfs3: Add missed "nocase" in ntfs_show_options
  fs/ntfs3: Code formatting and refactoring
  fs/ntfs3: Changed ntfs_get_acl() to use dentry
  fs/ntfs3: Remove field sbi->used.bitmap.set_tail
  fs/ntfs3: Undo critial modificatins to keep directory consistency
  fs/ntfs3: Undo endian changes
  fs/ntfs3: Optimization in ntfs_set_state()
  fs/ntfs3: Fix ntfs_create_inode()
  fs/ntfs3: Remove noacsrules
  fs/ntfs3: Use bh_read to simplify code
  fs/ntfs3: Fix a possible null-pointer dereference in ni_clear()
  fs/ntfs3: Refactoring of various minor issues
  fs/ntfs3: Restore overflow checking for attr size in mi_enum_attr
  fs/ntfs3: Check for extremely large size of $AttrDef
  fs/ntfs3: Improved checking of attribute's name length
  fs/ntfs3: Add null pointer checks
  fs/ntfs3: fix spelling mistake "attibute" -> "attribute"
  fs/ntfs3: Add length check in indx_get_root
  ...

Pull xfs updates from Dave Chinner:
 "This consists mainly of online scrub functionality and the design
  documentation for the upcoming online repair functionality built on
  top of the scrub code:

   - Added detailed design documentation for the upcoming online repair
     feature

   - major update to online scrub to complete the reverse mapping
     cross-referencing infrastructure enabling us to fully validate
     allocated metadata against owner records. This is the last piece of
     scrub infrastructure needed before we can start merging online
     repair functionality.

   - Fixes for the ascii-ci hashing issues

   - deprecation of the ascii-ci functionality

   - on-disk format verification bug fixes

   - various random bug fixes for syzbot and other bug reports"

* tag 'xfs-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (107 commits)
  xfs: fix livelock in delayed allocation at ENOSPC
  xfs: Extend table marker on deprecated mount options table
  xfs: fix duplicate includes
  xfs: fix BUG_ON in xfs_getbmap()
  xfs: verify buffer contents when we skip log replay
  xfs: _{attr,data}_map_shared should take ILOCK_EXCL until iread_extents is completely done
  xfs: remove WARN when dquot cache insertion fails
  xfs: don't consider future format versions valid
  xfs: deprecate the ascii-ci feature
  xfs: test the ascii case-insensitive hash
  xfs: stabilize the dirent name transformation function used for ascii-ci dir hash computation
  xfs: cross-reference rmap records with refcount btrees
  xfs: cross-reference rmap records with inode btrees
  xfs: cross-reference rmap records with free space btrees
  xfs: cross-reference rmap records with ag btrees
  xfs: introduce bitmap type for AG blocks
  xfs: convert xbitmap to interval tree
  xfs: drop the _safe behavior from the xbitmap foreach macro
  xfs: don't load local xattr values during scrub
  xfs: remove the for_each_xbitmap_ helpers
  ...

Pull iomap updates from Darrick Wong:
 "The only changes for this cycle are the addition of tracepoints to the
  iomap directio code so that Ritesh (who is working on porting ext2 to
  iomap) can observe the io flows more easily.

  Summary:

   - Remove an unused symbol

   - Add tracepoints for the directio code"

* tag 'iomap-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Add DIO tracepoints
  iomap: Remove IOMAP_DIO_NOSYNC unused dio flag
  fs.h: Add TRACE_IOCB_STRINGS for use in trace points