The TWL6025 was never released beyond sample form and was replaced by
the PhoenixLite range of chips - TWL6032. Change the references to
reference the TWL6032 class and name the registers to twl6032 in line with
an actual released chip name to avoid confusion.

Currently there are no users of TWL6025 in the code.
Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviwed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Include the missing header file to fix the following build error:
drivers/mfd/davinci_voicecodec.c: In function ‘davinci_vc_probe’:
drivers/mfd/davinci_voicecodec.c:86:3: error: implicit declaration of function
‘io_v2p’ [-Werror=implicit-function-declaration]
   (dma_addr_t)(io_v2p(davinci_vc->base) + DAVINCI_VC_WFIFO);
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The driver can be used on either arm or arm64 platforms, but
the latter doesn't have any platform-specific configuration
options, so it must be possible to manually enable the driver.

As the gpiolib is optional for arm64 arch, the gpio/led code
must be compiled conditionally.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Replace probe-time ioremap_nocache() call with devm_ioremap_nocache()
to avoid iounmap() missing and get rid of the corresponding iounmap()
call on remove.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

If an error occurs when loading power scripts or resources, the
registers are not correctly relocked. Fix it.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Remove unnecessary goto statements, causing duplicated if
conditions.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Support for loading twl4030-power module via devicetree.
For now, when booting with a DT, only the poweroff callback
feature is supported through the ti,use_poweroff property.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Increase lisibility when probing power scripts and resources by
creating dedicated functions.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

For now, the call to twl4030-power is hard-wired inside twl-core.
To ease the future transition to DT, make twl4030-power as a
separate module, like what is already done for twl4030-audio
and others.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Use devm_ioremap_resource and devm_kzalloc to simplify error
paths and reduce lines of code. Also use dev_err() to keep
consistency and drop the .remove function because the devm
functions take care of what it's doing besides the now obsolete
platform_set_drvdata() which we can just drop. Finally, use
module_platform_driver() to save some more lines.

Cc: David Brown <davidb@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

This allows the ssbi module to be autoloaded on boot.

Cc: David Brown <davidb@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The genirq IRQ wake method will default to failure if the irq_chip
does not provide a set_wake method.  However, for TWL4030 sub-chip
IRQs, we want the wake enable to succeed even though we don't provide
a set_wake method.  This allows sub-chip IRQs to still be flagged as
wakeup capable, and allow them to wakeup from suspend (or abort
suspend if they fire during suspend.)

To fix, use the IRQCHIP_SKIP_SET_WAKE flag in the irq_chip.
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

use module_pci_driver instead of init/exit, make code cleaner.
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Separate the devices initialization into different functions.
It makes the probe function clearer.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Change the chip id definition and detection and then:

1. We no longer need to add PM800_CHIP_XXX for the coming revision.
2. We no longer need to pass driver_data in i2c_device_id as we
   can distinguish the chips from the CHIP_ID register.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

pm800_pages_init and pm800_pages_exit are called by pm800_probe.
Change the code to enhance error handling and remove unused code at
pm800_pages_init/exit and pm800_probe.
Signed-off-by: Yi Zhang <yizhang@marvell.com>
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

88pm800 has two addtional pages - power and gpadc.
The address of the pages depends on the address of 88pm800.
So do not need pass the address of the power and gpadc in
platform data.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

88pm800/88pm805 interrupt is asserted low if the events happened.
So remove IRQF_TRIGGER_FALLING for irq request.
Also, the interrupt wiring is board dependent so do not set
IRQF_TRIGGER by default.
Signed-off-by: Yi Zhang <yizhang@marvell.com>
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mask_invert must be set otherwise interrupts cannot be cleared.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

88pm800 and 88pm805 shouldnot have the same driver name.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Move "device_800_init" to fix NULL pointer error when
calling "device_gpadc_init" as it needs "subchip->regmap_gpadc"
to set registers via regmap interface
Signed-off-by: Yi Zhang <yizhang@marvell.com>
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The wm8997 is a compact, high-performance audio hub CODEC with SLIMbus
interfacing, for smartphones, tablets and other portable audio devices
based on the Arizona platform.

This patch integrates the wm8997 into the Arizona mfd.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Ensure that the device is in a known good state. This should have little
practical impact as the runtime PM will reset the device shortly after
probe but it's neater.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Remove code which is not necessary for a device tree boot.

Boot tested on OMAP5-UEVM board.
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Acked-by: Laxman Dewangan  <ldewangan@nvidia.com>
Acked-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

A complete refurbished series inclunding:
- DT support for the MFD, TSC and ADC driver & platform device support,
  which has no users, has been killed.
- iio_map from last series is gone and replaced by proper nodes in the
  device tree.
- suspend fixes which means correct data structs are taken and no
  interrupt storm
- fifo split which should problem with TSC & ADC beeing used at the same
  time
- The ADC channels are now checked before blindly applied. That means the
  touch part reads X, Y and Z coordinates and does not mix them up. Same
  goes for the IIO ADC driver.
- The IIO ADC driver now creates files named in_voltageX_raw where X
  represents the ADC line instead of a number starting at 0. A read from
  this file can return -EBUSY in case touch is busy and the ADC didn't
  collect a value.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>