- 18 Dec, 2020 14 commits
-
-
Sonny Sasaka authored
Many controllers do not allow HCI Create Connection while it is doing Inquiry. This patch adds Inquiry Cancel before Create Connection in this case to allow the controller to do Create Connection. User space will be aware of this Inquiry cancellation and they may issue another discovery request afterwards. Sample Command Disallowed response of HCI Create Connection: < HCI Command: Inquiry (0x01|0x0001) plen 5 Access code: 0x9e8b33 (General Inquiry) Length: 10.24s (0x08) Num responses: 0 > HCI Event: Command Status (0x0f) plen 4 Inquiry (0x01|0x0001) ncmd 2 Status: Success (0x00) < HCI Command: Create Connection (0x01|0x0005) plen 13 Address: XX:XX:XX:XX:XX:XX Packet type: 0xcc18 Page scan repetition mode: R2 (0x02) Page scan mode: Mandatory (0x00) Clock offset: 0x0000 Role switch: Allow slave (0x01) > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) ncmd 1 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 Status: Command Disallowed (0x0c) Handle: 65535 Address: XX:XX:XX:XX:XX:XX Link type: ACL (0x01) Encryption: Disabled (0x00) Reviewed-by:Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by:
Alain Michaud <alainm@chromium.org> Signed-off-by:
Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Jagdish Tirumala authored
Switch and case where not properly aligned Signed-off-by:
Jagdish Tirumala <t.jag587@gmail.com> Signed-off-by:
-
Kiran K authored
This reverts commit a63f23c9d139377833a139b179793fea79ee198f. get_unaligned_{le16|le32|le64}(p) is meant to replace code of the form le16_to_cpu(get_unaligned((__le16 *)p)). There is no need to explicitly do leXX_to_cpu() if get_unaligned_leXX() is used. https://lwn.net/Articles/277779/Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Jakub Pawlowski authored
This enables bcm driver to properly handle ISO packets. Signed-off-by:
Jakub Pawlowski <jpawlowski@google.com> Signed-off-by:
-
Miao-chen Chou authored
The Realtek RTL8822CE Bluetooth controller support Microsoft vendor extension and it uses 0xFCF0 for VsMsftOpCode. The following test step was performed. - Boot the test device with RTL8822CE and verify the INFO print in dmesg. Signed-off-by:
Miao-chen Chou <mcchou@chromium.org> Reviewed-by:
Archie Pusaka <apusaka@chromium.org> Signed-off-by:
-
Miao-chen Chou authored
The Intel JeffersonPeak, HarrisonPeak and CyclonePeak Bluetooth controllers support the Microsoft vendor extension and they are using 0xFC1E for VsMsftOpCode. < HCI Command: Vendor (0x3f|0x001e) plen 1 00 > HCI Event: Command Complete (0x0e) plen 15 Vendor (0x3f|0x001e) ncmd 1 Status: Success (0x00) 00 3f 00 00 00 00 00 00 00 01 50 The following test step was performed. - Boot the test devices with HarrisonPeak and verify INFO print in dmesg. Signed-off-by: -
Miao-chen Chou authored
The following Qualcomm WCN399x Bluetooth controllers support the Microsoft vendor extension and they are using 0xFD70 for VsMsftOpCode. -WCN3990 -WCN3991 -WCN3998 < HCI Command: ogf 0x3f, ocf 0x0170, plen 1 00 > HCI Event: 0x0e plen 18 01 70 FD 00 00 1F 00 00 00 00 00 00 00 04 4D 53 46 54 The following test step was performed. - Boot the device with WCN3991 and verify INFO print in dmesg. Signed-off-by:
-
Abhishek Pandit-Subedi authored
Just like MGMT_OP_START_DISCOVERY, we should reject MGMT_OP_START_SERVICE_DISCOVERY with MGMT_STATUS_BUSY when we are paused for suspend. Signed-off-by:
-
Tim Jiang authored
we should send hci reset command before bt turn off, which can reset bt firmware status. Signed-off-by:
Tim Jiang <tjiang@codeaurora.org> Signed-off-by:
-
Abhishek Pandit-Subedi authored
Add a missing SUSPEND_SCAN_ENABLE in passive scan, remove the separate function for configuring le scan during suspend and update the request complete function to clear both enable and disable tasks. Fixes: dce0a4be ("Bluetooth: Set missing suspend task bits") Reviewed-by:
-
Claire Chang authored
In hci_uart_write_work, there is a loop/goto checking the value of HCI_UART_TX_WAKEUP. If HCI_UART_TX_WAKEUP is set again, it keeps trying hci_uart_dequeue; otherwise, it clears HCI_UART_SENDING and returns. In hci_uart_tx_wakeup, if HCI_UART_SENDING is already set, it sets HCI_UART_TX_WAKEUP, skips schedule_work and assumes the running/pending hci_uart_write_work worker will do hci_uart_dequeue properly. However, if the HCI_UART_SENDING check in hci_uart_tx_wakeup is done after the loop breaks, but before HCI_UART_SENDING is cleared in hci_uart_write_work, the schedule_work is skipped incorrectly. Fix this race by changing the order of HCI_UART_SENDING and HCI_UART_TX_WAKEUP modification. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Fixes: 82f5169b ("Bluetooth: hci_uart: add serdev driver support library") Signed-off-by:
Claire Chang <tientzu@chromium.org> Signed-off-by:
-
Venkata Lakshmi Narayana Gubba authored
Add support to read FW build version from debugfs node. This info can be read from /sys/kernel/debug/bluetooth/hci0/firmware_info Signed-off-by:
Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by:
-
Trent Piepho authored
When alt mode 6 is not available, fallback to the kernel <= 5.7 behavior of always using alt mode 1. Prior to kernel 5.8, btusb would always use alt mode 1 for WBS (Wide Band Speech aka mSBC aka transparent SCO). In commit baac6276 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints") this was changed to use alt mode 6, which is the recommended mode in the Bluetooth spec (Specifications of the Bluetooth System, v5.0, Vol 4.B §2.2.1). However, many if not most BT USB adapters do not support alt mode 6. In fact, I have been unable to find any which do. In kernel 5.8, this was changed to use alt mode 6, and if not available, use alt mode 0. But mode 0 has a zero byte max packet length and can not possibly work. It is just there as a zero-bandwidth dummy mode to work around a USB flaw that would prevent device enumeration if insufficient bandwidth were available for the lowest isoc mode supported. In effect, WBS was broken for all USB-BT adapters that do not support alt 6, which appears to nearly all of them. Then in commit 461f95f0 ("Bluetooth: btusb: USB alternate setting 1 for WBS") the 5.7 behavior was restored, but only for Realtek adapters. I've tested a Broadcom BRCM20702A and CSR 8510 adapter, both work with the 5.7 behavior and do not with the 5.8. So get rid of the Realtek specific flag and use the 5.7 behavior for all adapters as a fallback when alt 6 is not available. This was the kernel's behavior prior to 5.8 and I can find no adapters for which it is not correct. And even if there is an adapter for which this does not work, the current behavior would be to fall back to alt 0, which can not possibly work either, and so is no better. Signed-off-by:
Trent Piepho <tpiepho@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
Some resource should be released in the error handling path of the probe function, as already done in the remove function. The remove function was fixed in commit 5052de8d ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Fixes: 1511cc75 ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 15 Dec, 2020 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging / IIO driver updates from Greg KH: "Here is the big staging and IIO driver pull request for 5.11-rc1 Lots of different things in here: - loads of driver updates - so many coding style cleanups - new IIO drivers - Android ION code is finally removed from the tree - wimax drivers are moved to staging on their way out of the kernel Nothing really exciting, just the constant grind of kernel development :) All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits) staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe() staging: most: Fix spelling mistake "tranceiver" -> "transceiver" staging: qlge: remove duplicate word in comment staging: comedi: mf6x4: Fix AI end-of-conversion detection staging: greybus: Add TODO item about modernizing the pwm code pinctrl: ralink: add a pinctrl driver for the rt2880 family dt-bindings: pinctrl: rt2880: add binding document staging: rtl8723bs: remove ELEMENT_ID enum staging: rtl8723bs: remove unused macros staging: rtl8723bs: replace EID_EXTCapability staging: rtl8723bs: replace EID_BSSIntolerantChlReport staging: rtl8723bs: replace EID_BSSCoexistence staging: rtl8723bs: replace _MME_IE_ staging: rtl8723bs: replace _WAPI_IE_ staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_ staging: rtl8723bs: replace _ERPINFO_IE_ staging: rtl8723bs: replace _CHLGETXT_IE_ staging: rtl8723bs: replace _COUNTRY_IE_ staging: rtl8723bs: replace _IBSS_PARA_IE_ staging: rtl8723bs: replace _TIM_IE_ ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ...
-
Linus Torvalds authored
Merge tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core updates for 5.11-rc1 This time there was a lot of different work happening here for some reason: - redo of the fwnode link logic, speeding it up greatly - auxiliary bus added (this was a tag that will be pulled in from other trees/maintainers this merge window as well, as driver subsystems started to rely on it) - platform driver core cleanups on the way to fixing some long-time api updates in future releases - minor fixes and tweaks. All have been in linux-next with no (finally) reported issues. Testing there did helped in shaking issues out a lot :)" * tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits) driver core: platform: don't oops in platform_shutdown() on unbound devices ACPI: Use fwnode_init() to set up fwnode misc: pvpanic: Replace OF headers by mod_devicetable.h misc: pvpanic: Combine ACPI and platform drivers usb: host: sl811: Switch to use platform_get_mem_or_io() vfio: platform: Switch to use platform_get_mem_or_io() driver core: platform: Introduce platform_get_mem_or_io() dyndbg: fix use before null check soc: fix comment for freeing soc_dev_attr driver core: platform: use bus_type functions driver core: platform: change logic implementing platform_driver_probe driver core: platform: reorder functions driver core: make driver_probe_device() static driver core: Fix a couple of typos driver core: Reorder devices on successful probe driver core: Delete pointless parameter in fwnode_operations.add_links driver core: Refactor fw_devlink feature efi: Update implementation of add_links() to create fwnode links of: property: Update implementation of add_links() to create fwnode links driver core: Use device's fwnode to check if it is waiting for suppliers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty / serial updates from Greg KH: "Here is the "large" set of tty and serial patches for 5.11-rc1. Nothing major at all, some cleanups and some driver removals, always a nice sign: - build warning cleanups - vt locking and logic unwinding and cleanups - tiny serial driver fixes and updates - removal of the synclink serial driver as it's no longer needed - removal of dead termiox code All of this has been in linux-next for a while with no reported issues" * tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (89 commits) serial: 8250_pci: Drop bogus __refdata annotation tty: serial: meson: enable console as module serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access serial: imx: Move imx_uart_probe_dt() content into probe() serial: imx: Remove unneeded of_device_get_match_data() NULL check tty: Fix whitespace inconsistencies in vt_io_ioctl serial_core: Check for port state when tty is in error state dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC tty: use const parameters in port-flag accessors tty: use assign_bit() in port-flag accessors earlycon: drop semicolon from earlycon macro tty: Remove dead termiox code tty/serial/imx: Enable TXEN bit in imx_poll_init(). tty : serial: jsm: Fixed file by adding spacing tty: serial: uartlite: Support probe deferral earlycon: simplify earlycon-table implementation tty: serial: bcm63xx: lower driver dependencies serial: mxs-auart: Remove unneeded platform_device_id serial: 8250-mtk: Fix reference leak in mtk8250_probe serial: imx: Remove unused .id_table support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt updates from Greg KH: "Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues" * tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: phy: convert comma to semicolon usb: ucsi: convert comma to semicolon usb: typec: tcpm: convert comma to semicolon usb: typec: tcpm: Update vbus_vsafe0v on init usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled usb: typec: Add class for plug alt mode device USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP USB: typec: tcpm: Fix PR_SWAP error handling USB: typec: tcpm: Hard Reset after not receiving a Request USB: gadget: f_fs: remove likely/unlikely usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: typec: intel_pmc_mux: Configure cable generation value for USB4 MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "Lots of changes (slightly more code increase than usual) at this time, while most of code changes are ASoC driver-specific. Here are some highlights: Core: - The new auxiliary bus implementation for Intel DSP, which will be used by other drivers as well - Lots of ASoC core cleanups and refactoring - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others - Compress-offload API enhancement for the pause during draining HD- and USB-audio: - Enhancements of the USB-audio implicit feedback support, including better full-duplex operations - Continued CA0132 improvements and fixes - A few new quirk entries, HDMI audio fixes ASoC: - Support for boot time selection of Intel DSP firmware, which should help distros/users testing new stuff more easily; the kconfig was moved to boot time option, too - Some basic DPCM support in audio graph card - Removal of old pre-DT Freescale drivers - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715, Qualcomm SM8250 and simple GPIO based muxes" * tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits) ALSA: pcm: oss: Fix potential out-of-bounds shift ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: hda/ca0132 - Add ZxR surround DAC setup. ALSA: hda/ca0132 - Add 8051 PLL write helper functions. ALSA: hda/hdmi: packet buffer index must be set before reading value ASoC: SOF: imx: update kernel-doc description ASoC: mediatek: mt8183: delete some unreachable code ASoC: mediatek: mt8183: add PM ops to machine drivers ASoC: topology: Fix wrong size check ASoC: topology: Add missing size check ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err ASoC: SOF: modify the SOF_DBG flags ASoC: SOF: Intel: hda: remove duplicated status dump ASoC: rt1015p: delay 300ms after SDB pulling high for calibration ASoC: rt1015p: move SDB control from trigger to DAPM ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control() ALSA: usb-audio: Fix control 'access overflow' errors from chmap ALSA: hda/hdmi: always print pin NIDs as hexadecimal ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions. ... -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ... -
Linus Torvalds authored
Merge misc updates from Andrew Morton: - a few random little subsystems - almost all of the MM patches which are staged ahead of linux-next material. I'll trickle to post-linux-next work in as the dependents get merged up. Subsystems affected by this patch series: kthread, kbuild, ide, ntfs, ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc, uaccess, zram, and cleanups). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits) mm: cleanup kstrto*() usage mm: fix fall-through warnings for Clang mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at mm: shmem: convert shmem_enabled_show to use sysfs_emit_at mm:backing-dev: use sysfs_emit in macro defining functions mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening mm: use sysfs_emit for struct kobject * uses mm: fix kernel-doc markups zram: break the strict dependency from lzo zram: add stat to gather incompressible pages since zram set up zram: support page writeback mm/process_vm_access: remove redundant initialization of iov_r mm/zsmalloc.c: rework the list_add code in insert_zspage() mm/zswap: move to use crypto_acomp API for hardware acceleration mm/zswap: fix passing zero to 'PTR_ERR' warning mm/zswap: make struct kernel_param_ops definitions const userfaultfd/selftests: hint the test runner on required privilege userfaultfd/selftests: fix retval check for userfaultfd_open() userfaultfd/selftests: always dump something in modes userfaultfd: selftests: make __{s,u}64 format specifiers portable ... -
Alexey Dobriyan authored
Range checks can folded into proper conversion function. kstrto*() exist for all arithmetic types. Link: https://lkml.kernel.org/r/20201122123759.GC92364@localhost.localdomainSigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a break statement instead of just letting the code fall through to the next, and by adding a fallthrough pseudo-keyword in places where the code is intended to fall through. Link: https://github.com/KSPP/linux/issues/115 Link: https://lkml.kernel.org/r/f5756988b8842a3f10008fbc5b0a654f828920a9.1605896059.git.gustavoars@kernel.orgSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Joe Perches authored
Convert the unbounded uses of sprintf to sysfs_emit. A few conversions may now not end in a newline if the output buffer is overflowed. Link: https://lkml.kernel.org/r/0c90a90f466167f8c37de4b737553cf49c4a277f.1605376435.git.joe@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Joe Perches authored
Update the function to use sysfs_emit_at while neatening the uses of sprintf and overwriting the last space char with a newline to avoid possible output buffer overflow. Miscellanea: - in shmem_enabled_show, the removal of the indirected use of fmt allows __printf verification Link: https://lkml.kernel.org/r/b612a93825e5ea330cb68d2e8b516e9687a06cc6.1605376435.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
The cocci script used in commit bdacbb8d04f ("mm: Use sysfs_emit for struct kobject * uses") does not convert the name##_show macro because the macro uses concatenation via ##. Convert it by hand. Link: https://lkml.kernel.org/r/45ec6cfc177d743f9c0ebaf35e43969dce43af42.1605376435.git.joe@perches.comSigned-off-by: -
Joe Perches authored
Convert the only use of sprintf with struct kobject * that the cocci script could not convert. Miscellanea: - Neaten the uses of a constant string with sysfs_emit to use a const char * to reduce overall object size Link: https://lkml.kernel.org/r/7df6be66bbd68e1a0bca9d35aca1341dbf94d2a7.1605376435.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
Patch series "mm: Convert sysfs sprintf family to sysfs_emit", v2. Use the new sysfs_emit family and not the sprintf family. This patch (of 5): Use the sysfs_emit function instead of the sprintf family. Done with cocci script as in commit 3c6bff3c ("RDMA: Convert sysfs kobject * show functions to use sysfs_emit()") Link: https://lkml.kernel.org/r/cover.1605376435.git.joe@perches.com Link: https://lkml.kernel.org/r/9c249215bad6df616ba0410ad980042694970c1b.1605376435.git.joe@perches.comSigned-off-by:
-
Mauro Carvalho Chehab authored
Kernel-doc markups should use this format: identifier - description Fix some issues on mm files: 1) The definition for get_user_pages_locked() doesn't follow it. Also, it expects a short descrpition at the header, followed by a long one, after the parameters. Fix it. 2) Kernel-doc requires that a kernel-doc markup to be immediately below the function prototype, as otherwise it will rename it. So, move get_pfnblock_flags_mask() description to the right place. 3) Make invalidate_mapping_pagevec() to also follow the expected kernel-doc format. While here, fix a few minor English syntax issues, as suggested by Matthew: will used -> will be used similar with -> similar to Link: https://lkml.kernel.org/r/80e85dddc92d333bc2159ee8a2294921612e8745.1605521731.git.mchehab+huawei@kernel.orgSigned-off-by:Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Suggested-by: Mattew Wilcox <willy@infradead.org> [English fixes] Signed-off-by:
-
Rui Salvaterra authored
From the beginning, the zram block device always enabled CRYPTO_LZO, since lzo-rle is hardcoded as the fallback compression algorithm. As a consequence, on systems where another compression algorithm is chosen (e.g. CRYPTO_ZSTD), the lzo kernel module becomes unused, while still having to be built/loaded. This patch removes the hardcoded lzo-rle dependency and allows the user to select the default compression algorithm for zram at build time. The previous behaviour is kept, as the default algorithm is still lzo-rle. Link: https://lkml.kernel.org/r/20201207121245.50529-1-rsalvaterra@gmail.comSigned-off-by:
Rui Salvaterra <rsalvaterra@gmail.com> Suggested-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Suggested-by:
Minchan Kim <minchan@kernel.org> Acked-by:
-
Minchan Kim authored
Currently, zram supports the stat via /sys/block/zram/mm_stat to represent how many of incompressible pages are stored at the moment but it couldn't show how many times incompressible pages were wrote down since zram set up. It's also good indication to see how zram is effective in the system. Link: https://lkml.kernel.org/r/20201130201907.1284910-1-minchan@kernel.orgSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Minchan Kim authored
There is demand to writeback specific process pages to backing store instead of all idles pages in the system due to storage wear out concerns and to launching latency of apps which are most of the time idle but are critical for resume latency. This patch extends the writeback knob to support a specific page writeback. Link: https://lkml.kernel.org/r/20201020190506.3758660-1-minchan@kernel.orgSigned-off-by:
-
Colin Ian King authored
The pointer iov_r is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Link: https://lkml.kernel.org/r/20201102120614.694917-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Miaohe Lin authored
Rework the list_add code to make it more readable and simple. Link: https://lkml.kernel.org/r/20201015130107.65195-1-linmiaohe@huawei.comSigned-off-by:
Miaohe Lin <linmiaohe@huawei.com> Acked-by:
-
Barry Song authored
Right now, all new ZIP drivers are adapted to crypto_acomp APIs rather than legacy crypto_comp APIs. Tradiontal ZIP drivers like lz4,lzo etc have been also wrapped into acomp via scomp backend. But zswap.c is still using the old APIs. That means zswap won't be able to work on any new ZIP drivers in kernel. This patch moves to use cryto_acomp APIs to fix the disconnected bridge between new ZIP drivers and zswap. It is probably the first real user to use acomp but perhaps not a good example to demonstrate how multiple acomp requests can be executed in parallel in one acomp instance. frontswap is doing page load and store page by page synchronously. swap_writepage() depends on the completion of frontswap_store() to decide if it should call __swap_writepage() to swap to disk. However this patch creates multiple acomp instances, so multiple threads running on multiple different cpus can actually do (de)compression parallelly, leveraging the power of multiple ZIP hardware queues. This is also consistent with frontswap's page management model. The old zswap code uses atomic context and avoids the race conditions while shared resources like zswap_dstmem are accessed. Here since acomp can sleep, per-cpu mutex is used to replace preemption-disable. While it is possible to make mm/page_io.c and mm/frontswap.c support async (de)compression in some way, the entire design requires careful thinking and performance evaluation. For the first step, the base with fixed connection between ZIP drivers and zswap should be built. Link: https://lkml.kernel.org/r/20201107065332.26992-1-song.bao.hua@hisilicon.comSigned-off-by:
Barry Song <song.bao.hua@hisilicon.com> Acked-by:
Vitaly Wool <vitalywool@gmail.com> Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Mahipal Challa <mahipalreddy2006@gmail.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
YueHaibing authored
Fix smatch warning: mm/zswap.c:425 zswap_cpu_comp_prepare() warn: passing zero to 'PTR_ERR' crypto_alloc_comp() never return NULL, use IS_ERR instead of IS_ERR_OR_NULL to fix this. Link: https://lkml.kernel.org/r/20201031055615.28080-1-yuehaibing@huawei.com Fixes: f1c54846 ("zswap: dynamic pool creation") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by:
-
Joe Perches authored
These should be const, so make it so. Link: https://lkml.kernel.org/r/1791535ee0b00f4a5c68cc4a8adada06593ad8f1.1601770305.git.joe@perches.comSigned-off-by:
-
Peter Xu authored
Now userfaultfd test program requires either root or ptrace privilege due to the signal/event tests. When UFFDIO_API failed, hint the test runner about this fact verbosely. Link: https://lkml.kernel.org/r/20201208024709.7701-4-peterx@redhat.comSigned-off-by:
Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by:
-
Peter Xu authored
userfaultfd_open() returns 1 for errors rather than negatives. Fix it on all the callers so when UFFDIO_API failed the test will bail out. Link: https://lkml.kernel.org/r/20201208024709.7701-3-peterx@redhat.comSigned-off-by:
-
