- 27 Jun, 2019 2 commits
-
-
Neil Horman authored
When an application is run that: a) Sets its scheduler to be SCHED_FIFO and b) Opens a memory mapped AF_PACKET socket, and sends frames with the MSG_DONTWAIT flag cleared, its possible for the application to hang forever in the kernel. This occurs because when waiting, the code in tpacket_snd calls schedule, which under normal circumstances allows other tasks to run, including ksoftirqd, which in some cases is responsible for freeing the transmitted skb (which in AF_PACKET calls a destructor that flips the status bit of the transmitted frame back to available, allowing the transmitting task to complete). However, when the calling application is SCHED_FIFO, its priority is such that the schedule call immediately places the task back on the cpu, preventing ksoftirqd from freeing the skb, which in turn prevents the transmitting task from detecting that the transmission is complete. We can fix this by converting the schedule call to a completion mechanism. By using a completion queue, we force the calling task, when it detects there are no more frames to send, to schedule itself off the cpu until such time as the last transmitted skb is freed, allowing forward progress to be made. Tested by myself and the reporter, with good results Change Notes: V1->V2: Enhance the sleep logic to support being interruptible and allowing for honoring to SK_SNDTIMEO (Willem de Bruijn) V2->V3: Rearrage the point at which we wait for the completion queue, to avoid needing to check for ph/skb being null at the end of the loop. Also move the complete call to the skb destructor to avoid needing to modify __packet_set_status. Also gate calling complete on packet_read_pending returning zero to avoid multiple calls to complete. (Willem de Bruijn) Move timeo computation within loop, to re-fetch the socket timeout since we also use the timeo variable to record the return code from the wait_for_complete call (Neil Horman) V3->V4: Willem has requested that the control flow be restored to the previous state. Doing so lets us eliminate the need for the po->wait_on_complete flag variable, and lets us get rid of the packet_next_frame function, but introduces another complexity. Specifically, but using the packet pending count, we can, if an applications calls sendmsg multiple times with MSG_DONTWAIT set, each set of transmitted frames, when complete, will cause tpacket_destruct_skb to issue a complete call, for which there will never be a wait_on_completion call. This imbalance will lead to any future call to wait_for_completion here to return early, when the frames they sent may not have completed. To correct this, we need to re-init the completion queue on every call to tpacket_snd before we enter the loop so as to ensure we wait properly for the frames we send in this iteration. Change the timeout and interrupted gotos to out_put rather than out_status so that we don't try to free a non-existant skb Clean up some extra newlines (Willem de Bruijn) Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Now in sctp_endpoint_init(), it holds the sk then creates auth shkey. But when the creation fails, it doesn't release the sk, which causes a sk defcnf leak, Here to fix it by only holding the sk when auth shkey is created successfully. Fixes: a29a5bd4 ("[SCTP]: Implement SCTP-AUTH initializations.") Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Jun, 2019 11 commits
-
-
David S. Miller authored
Nicolas Dichtel says: ==================== ipv6: fix neighbour resolution with raw socket The first patch prepares the fix, it constify rt6_nexthop(). The detail of the bug is explained in the second patch. v1 -> v2: - fix compilation warnings - split the initial patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
The scenario is the following: the user uses a raw socket to send an ipv6 packet, destinated to a not-connected network, and specify a connected nh. Here is the corresponding python script to reproduce this scenario: import socket IPPROTO_RAW = 255 send_s = socket.socket(socket.AF_INET6, socket.SOCK_RAW, IPPROTO_RAW) # scapy # p = IPv6(src='fd00:100::1', dst='fd00:200::fa')/ICMPv6EchoRequest() # str(p) req = b'`\x00\x00\x00\x00\x08:@\xfd\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\xfd\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfa\x80\x00\x81\xc0\x00\x00\x00\x00' send_s.sendto(req, ('fd00:175::2', 0, 0, 0)) fd00:175::/64 is a connected route and fd00:200::fa is not a connected host. With this scenario, the kernel starts by sending a NS to resolve fd00:175::2. When it receives the NA, it flushes its queue and try to send the initial packet. But instead of sending it, it sends another NS to resolve fd00:200::fa, which obvioulsy fails, thus the packet is dropped. If the user sends again the packet, it now uses the right nh (fd00:175::2). The problem is that ip6_dst_lookup_neigh() uses the rt6i_gateway, which is :: because the associated route is a connected route, thus it uses the dst addr of the packet. Let's use rt6_nexthop() to choose the right nh. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
There is no functional change in this patch, it only prepares the next one. rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const variables. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marek Vasut authored
Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly fine for the kernel to sleep for a bit in ksz_switch_register(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
In configuration of vlan over bridge over aquantia device it was found that vlan tagged traffic is dropped on chip. The reason is that bridge device enables promisc mode, but in atlantic chip vlan filters will still apply. So we have to corellate promisc settings with vlan configuration. The solution is to track in a separate state variable the need of vlan forced promisc. And also consider generic promisc configuration when doing vlan filter config. Fixes: 7975d2af ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Suryaputra authored
Multicast or broadcast egress packets have rt_iif set to the oif. These packets might be recirculated back as input and lookup to the raw sockets may fail because they are bound to the incoming interface (skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function returns rt_iif instead of skb_iif. Hence, the lookup fails. v2: Make it non vrf specific (David Ahern). Reword the changelog to reflect it. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
We should rather have vlan_tci filled all the way down to the transmitting netdevice and let it do the hw/sw vlan implementation. Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: fixes 2019-06-26 here are 2 small smc fixes for the net tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
If register_pernet_subsys success in smc_init, we should cleanup it in case any other error. Fixes: 64e28b52 (net/smc: add pnet table namespace support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huaping Zhou authored
After smc_lgr_create(), the newly created link group is added to smc_lgr_list, thus is accessible from other context. Although link group creation is serialized by smc_create_lgr_pending, the new link group may still be accessed concurrently. For example, if ib_device is no longer active, smc_ib_port_event_work() will call smc_port_terminate(), which in turn will call __smc_lgr_terminate() on every link group of this device. So conns_lock is required here. Signed-off-by: Huaping Zhou <zhp@smail.nju.edu.cn> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
We build vlan on top of bonding interface, which vlan offload is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is BOND_XMIT_POLICY_ENCAP34. Because vlan tx offload is off, vlan tci is cleared and skb push the vlan header in validate_xmit_vlan() while sending from vlan devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to get information from protocol headers encapsulated within vlan, because 'nhoff' is points to IP header, so bond hashing is based on layer 2 info, which fails to distribute packets across slaves. This patch always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Fixes: 278339a4 ("bonding: propogate vlan_features to bonding master") Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Jun, 2019 2 commits
-
-
Eiichi Tsukata authored
/proc/sys/net/ipv6/route/skip_notify_on_dev_down assumes given value to be 0 or 1. Use proc_dointvec_minmax instead of proc_dointvec. Fixes: 7c6bb7d2 ("net/ipv6: Add knob to skip DELROUTE message ondevice down") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Suryaputra authored
In commit 19e4e768 ("ipv4: Fix raw socket lookup for local traffic"), the dif argument to __raw_v4_lookup() is coming from the returned value of inet_iif() but the change was done only for the first lookup. Subsequent lookups in the while loop still use skb->dev->ifIndex. Fixes: 19e4e768 ("ipv4: Fix raw socket lookup for local traffic") Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Jun, 2019 5 commits
-
-
Bjørn Mork authored
The syzbot reported Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x67/0x231 mm/kasan/report.c:188 __kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317 kasan_report+0xe/0x20 mm/kasan/common.c:614 qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x660 drivers/base/dd.c:509 driver_probe_device+0x104/0x210 drivers/base/dd.c:670 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 Caused by too many confusing indirections and casts. id->driver_info is a pointer stored in a long. We want the pointer here, not the address of it. Thanks-to: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+b68605d7fadd21510de1@syzkaller.appspotmail.com Cc: Kristian Evensen <kristian.evensen@gmail.com> Fixes: e4bf6348 ("qmi_wwan: Add quirk for Quectel dynamic config") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch is to fix an uninit-value issue, reported by syzbot: BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:981 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 memchr+0xce/0x110 lib/string.c:981 string_is_valid net/tipc/netlink_compat.c:176 [inline] tipc_nl_compat_bearer_disable+0x2a1/0x480 net/tipc/netlink_compat.c:449 __tipc_nl_compat_doit net/tipc/netlink_compat.c:327 [inline] tipc_nl_compat_doit+0x3ac/0xb00 net/tipc/netlink_compat.c:360 tipc_nl_compat_handle net/tipc/netlink_compat.c:1178 [inline] tipc_nl_compat_recv+0x1b1b/0x27b0 net/tipc/netlink_compat.c:1281 TLV_GET_DATA_LEN() may return a negtive int value, which will be used as size_t (becoming a big unsigned long) passed into memchr, cause this issue. Similar to what it does in tipc_nl_compat_bearer_enable(), this fix is to return -EINVAL when TLV_GET_DATA_LEN() is negtive in tipc_nl_compat_bearer_disable(), as well as in tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats(). v1->v2: - add the missing Fixes tags per Eric's request. Fixes: 0762216c ("tipc: fix uninit-value in tipc_nl_compat_bearer_enable") Fixes: 8b66fee7 ("tipc: fix uninit-value in tipc_nl_compat_link_reset_stats") Reported-by: syzbot+30eaa8bf392f7fafffaf@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch fixes the MAC address setup in the probe. The MAC address retrieved using of_get_mac_address was checked for not containing an error, but it may also be NULL which wasn't tested. Fix it by replacing IS_ERR with IS_ERR_OR_NULL. Fixes: 541ddc66 ("net: macb: support of_get_mac_address new ERR_PTR error") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot found we can leak memory in packet_set_ring(), if user application provides buggy parameters. Fixes: 7f953ab2 ("af_packet: TX_RING support for TPACKET_V3") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dirk van der Merwe authored
With commit 94850257 ("tls: Fix tls_device handling of partial records") a new path was introduced to cleanup partial records during sk_proto_close. This path does not handle the SW KTLS tx_list cleanup. This is unnecessary though since the free_resources calls for both SW and offload paths will cleanup a partial record. The visible effect is the following warning, but this bug also causes a page double free. WARNING: CPU: 7 PID: 4000 at net/core/stream.c:206 sk_stream_kill_queues+0x103/0x110 RIP: 0010:sk_stream_kill_queues+0x103/0x110 RSP: 0018:ffffb6df87e07bd0 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff8c21db4971c0 RCX: 0000000000000007 RDX: ffffffffffffffa0 RSI: 000000000000001d RDI: ffff8c21db497270 RBP: ffff8c21db497270 R08: ffff8c29f4748600 R09: 000000010020001a R10: ffffb6df87e07aa0 R11: ffffffff9a445600 R12: 0000000000000007 R13: 0000000000000000 R14: ffff8c21f03f2900 R15: ffff8c21f03b8df0 Call Trace: inet_csk_destroy_sock+0x55/0x100 tcp_close+0x25d/0x400 ? tcp_check_oom+0x120/0x120 tls_sk_proto_close+0x127/0x1c0 inet_release+0x3c/0x60 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0xd8/0x210 task_work_run+0x84/0xa0 do_exit+0x2dc/0xb90 ? release_sock+0x43/0x90 do_group_exit+0x3a/0xa0 get_signal+0x295/0x720 do_signal+0x36/0x610 ? SYSC_recvfrom+0x11d/0x130 exit_to_usermode_loop+0x69/0xb0 do_syscall_64+0x173/0x180 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fe9b9abc10d RSP: 002b:00007fe9b19a1d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 0000000000000006 RCX: 00007fe9b9abc10d RDX: 0000000000000002 RSI: 0000000000000080 RDI: 00007fe948003430 RBP: 00007fe948003410 R08: 00007fe948003430 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005603739d9080 R13: 00007fe9b9ab9f90 R14: 00007fe948003430 R15: 0000000000000000 Fixes: 94850257 ("tls: Fix tls_device handling of partial records") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Jun, 2019 1 commit
-
-
YueHaibing authored
If register_qdisc fails, we should unregister netdevice notifier. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e0a7683d ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Jun, 2019 8 commits
-
-
Xin Long authored
This patch is to fix a dst defcnt leak, which can be reproduced by doing: # ip net a c; ip net a s; modprobe tipc # ip net e s ip l a n eth1 type veth peer n eth1 netns c # ip net e c ip l s lo up; ip net e c ip l s eth1 up # ip net e s ip l s lo up; ip net e s ip l s eth1 up # ip net e c ip a a 1.1.1.2/8 dev eth1 # ip net e s ip a a 1.1.1.1/8 dev eth1 # ip net e c tipc b e m udp n u1 localip 1.1.1.2 # ip net e s tipc b e m udp n u1 localip 1.1.1.1 # ip net d c; ip net d s; rmmod tipc and it will get stuck and keep logging the error: unregister_netdevice: waiting for lo to become free. Usage count = 1 The cause is that a dst is held by the udp sock's sk_rx_dst set on udp rx path with udp_early_demux == 1, and this dst (eventually holding lo dev) can't be released as bearer's removal in tipc pernet .exit happens after lo dev's removal, default_device pernet .exit. "There are two distinct types of pernet_operations recognized: subsys and device. At creation all subsys init functions are called before device init functions, and at destruction all device exit functions are called before subsys exit function." So by calling register_pernet_device instead to register tipc_net_ops, the pernet .exit() will be invoked earlier than loopback dev's removal when a netns is being destroyed, as fou/gue does. Note that vxlan and geneve udp tunnels don't have this issue, as the udp sock is released in their device ndo_stop(). This fix is also necessary for tipc dst_cache, which will hold dsts on tx path and I will introduce in my next patch. Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sergej Benilov authored
Since commit 605ad7f1 "tcp: refine TSO autosizing", outbound throughput is dramatically reduced for some connections, as sis900 is doing TX completion within idle states only. Make TX completion happen after every transmitted packet. Test: netperf before patch: > netperf -H remote -l -2000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 253.44 0.06 after patch: > netperf -H remote -l -10000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 5.38 14.89 Thx to Dave Miller and Eric Dumazet for helpful hints Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roland Hii authored
When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit hardware timestamp. The polling will most likely timeout if the tx coalesce is enabled due to the Interrupt-on-Completion (IC) bit is not set in tx descriptor for those frames. This patch will ignore the tx coalesce parameter and set the IC bit when transmitting PTP frames which need to report out the frame transmit hardware timestamp to user space. Fixes: f748be53 ("net: stmmac: Rework coalesce timer and fix multi-queue races") Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roland Hii authored
When ADDSUB bit is set, the system time seconds field is calculated as the complement of the seconds part of the update value. For example, if 3.000000001 seconds need to be subtracted from the system time, this field is calculated as 2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD Previously, the 0x100000000 is mistakenly written as 100000000. This is further simplified from sec = (0x100000000ULL - sec); to sec = -sec; Fixes: ba1ffd74 ("stmmac: fix PTP support for GMAC4") Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Takashi Iwai authored
The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a softdep line, so that the corresponding module gets prepared gracefully. Without this, a simple inclusion to initrd via dracut failed due to the missing dependency, for example. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Oros authored
Certain cards in conjunction with certain switches need a little more time for link setup that results in ethtool link test failure after offline test. Patch adds a loop that waits for a link setup finish. Changes in v2: - added fixes header Fixes: 4276e47e ("be2net: Add link test to list of ethtool self tests.") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume Nault. 2) Don't access the DDM interface unless the transceiver implements it in bnx2x, from Mauro S. M. Rodrigues. 3) Don't double fetch 'len' from userspace in sock_getsockopt(), from JingYi Hou. 4) Sign extension overflow in lio_core, from Colin Ian King. 5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski. 6) Fix epollout hang in hvsock, from Sunil Muthuswamy. 7) Fix regression in default fib6_type, from David Ahern. 8) Handle memory limits in tcp_fragment more appropriately, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits) tcp: refine memory limit test in tcp_fragment() inet: clear num_timeout reqsk_alloc() net: mvpp2: debugfs: Add pmap to fs dump ipv6: Default fib6_type to RTN_UNICAST when not set net: hns3: Fix inconsistent indenting net/af_iucv: always register net_device notifier net/af_iucv: build proper skbs for HiperTransport net/af_iucv: remove GFP_DMA restriction for HiperTransport net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge() hvsock: fix epollout hang from race condition net/udp_gso: Allow TX timestamp with UDP GSO net: netem: fix use after free and double free with packet corruption net: netem: fix backlog accounting for corrupted GSO frames net: lio_core: fix potential sign-extension overflow on large shift tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL tun: wake up waitqueues after IFF_UP is set net: remove duplicate fetch in sock_getsockopt tipc: fix issues with early FAILOVER_MSG from peer ...
-
Eric Dumazet authored
tcp_fragment() might be called for skbs in the write queue. Memory limits might have been exceeded because tcp_sendmsg() only checks limits at full skb (64KB) boundaries. Therefore, we need to make sure tcp_fragment() wont punish applications that might have setup very low SO_SNDBUF values. Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Jun, 2019 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "This is probably our last -rc pull request. We don't have anything else outstanding at the moment anyway, and with the summer months on us and people taking trips, I expect the next weeks leading up to the merge window to be pretty calm and sedate. This has two simple, no brainer fixes for the EFA driver. Then it has ten not quite so simple fixes for the hfi1 driver. The problem with them is that they aren't simply one liner typo fixes. They're still fixes, but they're more complex issues like livelock under heavy load where the answer was to change work queue usage and spinlock usage to resolve the problem, or issues with orphaned requests during certain types of failures like link down which required some more complex work to fix too. They all look like legitimate fixes to me, they just aren't small like I wish they were. Summary: - 2 minor EFA fixes - 10 hfi1 fixes related to scaling issues" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/efa: Handle mmap insertions overflow RDMA/efa: Fix success return value in case of error IB/hfi1: Handle port down properly in pio IB/hfi1: Handle wakeup of orphaned QPs for pio IB/hfi1: Wakeup QPs orphaned on wait list after flush IB/hfi1: Use aborts to trigger RC throttling IB/hfi1: Create inline to get extended headers IB/hfi1: Silence txreq allocation warnings IB/hfi1: Avoid hardlockup with flushlist_lock IB/hfi1: Correct tid qp rcd to match verbs context IB/hfi1: Close PSM sdma_progress sleep window IB/hfi1: Validate fault injection opcode user input
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull more NFS client fixes from Anna Schumaker: "These are mostly refcounting issues that people have found recently. The revert fixes a suspend recovery performance issue. - SUNRPC: Fix a credential refcount leak - Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE" - SUNRPC: Fix xps refcount imbalance on the error path - NFS4: Only set creation opendata if O_CREAT" * tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: SUNRPC: Fix a credential refcount leak Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE" net :sunrpc :clnt :Fix xps refcount imbalance on the error path NFS4: Only set creation opendata if O_CREAT
-
Andy Lutomirski authored
GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock pages before the vclock mode checks. This creates a path through vclock_gettime() in which no vclock is enabled at all (due to disabled TSC on old CPUs, for example) but the pvclock or hvclock page nevertheless read. This will segfault on bare metal. This fixes commit 459e3a21 ("gcc-9: properly declare the {pv,hv}clock_page storage") in the sense that, before that commit, GCC didn't seem to generate the offending code. There was nothing wrong with that commit per se, and -stable maintainers should backport this to all supported kernels regardless of whether the offending commit was present, since the same crash could just as easily be triggered by the phase of the moon. On GCC 9.1.1, this doesn't seem to affect the generated code at all, so I'm not too concerned about performance regressions from this fix. Cc: stable@vger.kernel.org Cc: x86@kernel.org Cc: Borislav Petkov <bp@alien8.de> Reported-by: Duncan Roe <duncan_roe@optusnet.com.au> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Trond Myklebust authored
All callers of __rpc_clone_client() pass in a value for args->cred, meaning that the credential gets assigned and referenced in the call to rpc_new_client(). Reported-by: Ido Schimmel <idosch@idosch.org> Fixes: 79caa5fa ("SUNRPC: Cache cred of process creating the rpc_client") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Anna Schumaker authored
Jon Hunter reports: "I have been noticing intermittent failures with a system suspend test on some of our machines that have a NFS mounted root file-system. Bisecting this issue points to your commit 43123581 ("SUNRPC: Declare RPC timers as TIMER_DEFERRABLE") and reverting this on top of v5.2-rc3 does appear to resolve the problem. The cause of the suspend failure appears to be a long delay observed sometimes when resuming from suspend, and this is causing our test to timeout." This reverts commit 43123581. Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Lin Yi authored
rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget to release it before return, may lead to a memory leak. Signed-off-by: Lin Yi <teroincn@163.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Benjamin Coddington authored
We can end up in nfs4_opendata_alloc during task exit, in which case current->fs has already been cleaned up. This leads to a crash in current_umask(). Fix this by only setting creation opendata if we are actually doing an open with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since O_CREAT will never be set for the recovery path. Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just one ARM fix this time around for Jason Donenfeld, fixing a problem with the VDSO generation on big endian" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8867/1: vdso: pass --be8 to linker if necessary
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Just catching up on the week since back from holidays, everything seems quite sane. core: - copy_to_user fix for really legacy codepaths. vmwgfx: - two dma fixes - one virt hw interaction fix i915: - modesetting fix - gvt fix panfrost: - BO unmapping fix imx: - image converter fixes" * tag 'drm-fixes-2019-06-21' of git://anongit.freedesktop.org/drm/drm: drm/i915: Don't clobber M/N values during fastset check drm: return -EFAULT if copy_to_user() fails drm/panfrost: Make sure a BO is only unmapped when appropriate drm/i915/gvt: ignore unexpected pvinfo write gpu: ipu-v3: image-convert: Fix image downsize coefficients gpu: ipu-v3: image-convert: Fix input bytesperline for packed formats gpu: ipu-v3: image-convert: Fix input bytesperline width/height align drm/vmwgfx: fix a warning due to missing dma_parms drm/vmwgfx: Honor the sg list segment size limitation drm/vmwgfx: Use the backdoor port if the HB port is not available
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO/counter fixes from Greg KH: "Here are some small driver bugfixes for some staging/iio/counter drivers. Staging and IIO have been lumped together for a while, as those subsystems cross the areas a log, and counter is used by IIO, so that's why they are all in one pull request here. These are small fixes for reported issues in some iio drivers, the erofs filesystem, and a build issue for counter code. All have been in linux-next with no reported issues" * tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: erofs: add requirements field in superblock counter/ftm-quaddec: Add missing dependencies in Kconfig staging: iio: adt7316: Fix build errors when GPIOLIB is not set iio: temperature: mlx90632 Relax the compatibility check iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller staging:iio:ad7150: fix threshold mode config bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a number of small driver fixes for 5.2-rc6 Nothing major, just fixes for reported issues: - soundwire fixes - thunderbolt fixes - MAINTAINERS update for fpga maintainer change - binder bugfix - habanalabs 64bit pointer fix - documentation updates All of these have been in linux-next with no reported issues" * tag 'char-misc-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: use u64_to_user_ptr() for reading user pointers doc: fix documentation about UIO_MEM_LOGICAL using MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk docs: fb: Add TER16x32 to the available font names MAINTAINERS: fpga: hand off maintainership to Moritz thunderbolt: Implement CIO reset correctly for Titan Ridge binder: fix possible UAF when freeing buffer thunderbolt: Make sure device runtime resume completes before taking domain lock soundwire: intel: set dai min and max channels correctly soundwire: stream: fix bad unlock balance soundwire: stream: fix out of boundary access on port properties
-