- 17 Feb, 2017 6 commits
-
-
Madhavan Srinivasan authored
Since PM_INST_CMPL may not provide right counts in all sampling scenarios in power9 DD1, instead use PM_INST_DISP. Patch also update generic instruction sampling with the same. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Madhavan Srinivasan authored
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Madhavan Srinivasan authored
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Madhavan Srinivasan authored
Factor out the power8 event_alternative function to share the code with power9. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Sahil Mehta authored
Indexed-count remove for memory hotplug guarantees that a contiguous block of <count> lmbs beginning at a specified <index> will be unassigned (NOT that <count> lmbs will be removed). Because of Qemu's per-DIMM memory management, the removal of a contiguous block of memory currently requires a series of individual calls. Indexed-count remove reduces this series into a single call. Signed-off-by: Sahil Mehta <sahilmehta17@gmail.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Sahil Mehta authored
Indexed-count add for memory hotplug guarantees that a contiguous block of <count> lmbs beginning at a specified <drc index> will be assigned, any LMBs in this range that are not already assigned will be DLPAR added. Because of Qemu's per-DIMM memory management, the addition of a contiguous block of memory currently requires a series of individual calls to add each LMB in the block. Indexed-count add reduces this series of calls to a single call for the entire block. Signed-off-by: Sahil Mehta <sahilmehta17@gmail.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 16 Feb, 2017 4 commits
-
-
Michael Ellerman authored
We can't sensibly take a trap at this point. So, blacklist these symbols. Reported-by: Anton Blanchard <anton@samba.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
slb_finish_load and slb_finish_load_1T are both only used within slb_low.S, so make them local symbols. This makes the code a little clearer, as it's more obvious neither is intended to be an entry point from arbitrary other code, only the uses in this file. It also prevents them being used with kprobes and other tracing tools, which is good because we're not able to safely take traps at these locations, so making them local symbols avoids us needing to blacklist them. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Stewart Smith authored
The block guys have merged a new driver called "sed-opal", which is getting caught by our pattern match on "opal". So drop our "opal" pattern and replace it with matches against the specific paths for our drivers. We should try and remember to add new drivers as they're added in future. Suggested-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> [mpe: Fix ic2/i2c typo, write change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
We broke the build when CONFIG_MEMORY_HOTREMOVE=n: arch/powerpc/platforms/pseries/hotplug-memory.c:821:8: error: implicit declaration of function 'dlpar_memory_readd_by_index' Add a dummy to fix it. Fixes: e70d5970 ("powerpc/pseries: Introduce memory hotplug READD operation") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 15 Feb, 2017 16 commits
-
-
Rashmica Gupta authored
There are quite a few entries in asm-offests.c which look like: DEFINE(REG, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, reg)); So define a macro to do it once. Signed-off-by: Rashmica Gupta <rashmicy@gmail.com> [mpe: Rename to STACK_PT_REGS_OFFSET for excruciating explicitness] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Rashmica Gupta authored
A lot of entries in asm-offests.c look like this: DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); But there is a common macro, OFFSET, which makes this cleaner: OFFSET(TI_flags, thread_info, flags) So use it. Signed-off-by: Rashmica Gupta <rashmicy@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Al Viro authored
In all the years it's been in the tree it had never been used by anything - it would instantly trigger BUG_ON() in fs/fcntl.c due to bogus band argument (ie. POLLIN not POLL_IN) passed to kill_fasync(). Since nobody had ever used it in ten years, let's just rip it out and be done with that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
WARN_ONCE() takes a condition and a format string. We were passing a constant string as the condition, and the function name as the format string. It would work, but the message would be just the function name. Fix it by just using WARN_ONCE() directly instead of if (x) WARN_ONCE(). Noticed-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
We're supporting surprise hotplug on PCI slots behind root port or PCIe switch downstream ports, which don't claim the capability in hardware register (offset: PCIe cap + PCI_EXP_SLTCAP). PEX8718 is one of the examples. For those PCI slots, the PDC (Presence Detection Change) event isn't reliable and the underly (skiboot) firmware has best judgement. This masks the PDC event when skiboot requests by "ibm,slot-broken-pdc" property in PCI slot's device-tree node. Reported-by: Hank Chang <hankmax0000@gmail.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Willie Liauw <williel@supermicro.com.tw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
In PowerNV PCI hotplug driver, the initial PCI slot's state is set to PNV_PHP_STATE_POPULATED if no PCI devices are connected to the slot. The PCI devices that are hot added to the slot won't be probed and populated because of the check in pnv_php_enable(): /* Check if the slot has been configured */ if (php_slot->state != PNV_PHP_STATE_REGISTERED) return 0; This fixes the issue by leaving the slot in PNV_PHP_STATE_REGISTERED state initially if nothing is connected to the slot. Fixes: 360aebd8 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Cc: stable@vger.kernel.org #v4.9+ Reported-by: Hank Chang <hankmax0000@gmail.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Willie Liauw <williel@supermicro.com.tw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
The surprise hotplug is driven by interrupt in PowerNV PCI hotplug driver. In the interrupt handler, pnv_php_interrupt(), we bail when pnv_pci_get_presence_state() returns zero wrongly. It causes the presence change event is always ignored incorrectly. This fixes the issue by bailing on error (non-zero value) returned from pnv_pci_get_presence_state(). Fixes: 360aebd8 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Cc: stable@vger.kernel.org #v4.9+ Reported-by: Hank Chang <hankmax0000@gmail.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Willie Liauw <williel@supermicro.com.tw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Balbir Singh authored
After updating ppc-dis.c, ppc-opc.c and ppc.h the following changes were made to enable compilation and working of xmon: 1. Remove all disassembler_info 2. Use xmon's printf/print_address to output data and addresses respectively. 3. All bfd_* types and casts have been removed. 4. Optimizations related to opcd_indices have been removed. 5. The dialect is set based on cpu features. 6. PPC_OPCODE_CLASSIC is no longer supported in the new disassembler. 7. VLE opcode parsing and printing has been stripped. 8. Coding style conventions used for those routines has been retained and it does not match our CodingStyle. 9. The highest supported dialect is POWER9. 10. Defined ATTRIBUTE_UNUSED in ppc-dis.c. 11. Defined _(x) in ppc-dis.c. Finally, we remove the dependency on BROKEN so that XMON_DISASSEMBLY can be enabled again. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Balbir Singh authored
The following commit-ids from the binutils project were applied on the xmon branch and relicensed with the permission of the authors under GPLv2 for the following files: ppc-opc.c ppc-dis.c ppc.h Working off of binutils commit 65b650b4c746 we have now moved up to binutils commit a5721ba270dd. Some commit logs have been taken verbatim, some are summarized for ease of understanding. Here is a summary of the commits: 33e8d5ac613d PPC7450 New. (powerpc_opcodes): Use it in dcba. c3d65c1ced61 New opcodes and mask 8dbcd839b1bb Instruction Sorting 91eb7075e370 (powerpc_opcodes): Fix the first two operands of dquaiq. 548b1dcfcbab ppc-opc.c (powerpc_opcodes): Remove the dcffix and dcffix. 930bb4cfae30 Support optional L form mtmsr. de866fccd87d (powerpc_opcodes): Order and format. 19a6653ce8c6 ppc e500mc support fa452fa6833c (ppc_cpu_t): New typedef. c8187e1509b2 (parse_cpu): Handle -m464. 081ba1b3c08b Define. (PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI) 9b4e57660d38 Rename altivec_or_spe to retain_flags. Handle -mvsx and -mpower7. 899d85beadd0 (powerpc_opcodes): Enable rfci, mfpmr, mtpmr for e300. e1c93c699b7d (extract_sprg): Correct operand range check. 2f3bb96af796 (powerpc_init_dialect): Do not set PPC_OPCODE_BOOKE 1cb0a7674666 (ppc_setup_opcodes): Remove PPC_OPCODE_NOPOWER4 test 21169fcfadfa (print_insn_powerpc): Skip insn if it is deprecated 80890a619b85 ("dcbt", "dcbtst") 0e55be1624c2 ("lfdepx", "stfdepx") 066be9f7bd8e (parse_cpu): Extend -mpower7 to accept power7 and isel instructions. c72ab5f2c55d (powerpc_opcodes): Reorder the opcode table so that instructions 69fe9ce501f5 (ppc_parse_cpu): New function. (powerpc_init_dialect) e401b04ca7cd (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and E500MC entries. 70dc4e324b9a (powerpc_init_dialect): Do not choose a default dialect due to -many/-Many. 858d7a6db20b (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva", "tlbilx" bdc7fcfe59f1 (powerpc_macros <extrdi>): Allow n+b of 64 e0d602ecffb0 (md_show_usage): Document -mpcca2 b961e85b6ebe (ppc_cpu_t): Typedef to uint64_t 8765b5569284 (powerpc_opcodes): Remove support for the the "lxsdux", "lxvd2ux" 634b50f2a623 Rename "ppca2" to "a2" 9fe54b1ca1c0 (md_show_usage): Document -m476 0dc9305793c8 Add bfd_mach_ppc_e500mc64 ce3d2015b21b Define. bfd/ * archures.c (bfd_mach_ppc_titan) cdc51b0748c4 Add -mpwr4, -mpwr5, -mpwr5x, -mpwr6 and -mpwr7 63d0fa4e9e57 Add PPC_OPCODE_E500MC for "e500mc64" cee62821d472 New Define. ("dccci"): Enable for PPCA2 85d4ac0b3c0b Correct wclr encoding. 51b5d4a8c5e5 (powerpc_opcodes): Enable divdeu, devweu, divde, divwe, divdeuo e01d869a3be2 (md_assemble): Emit APUinfo section for PPC_OPCODE_E500 09a8ad8d8f56 (powerpc_opcodes): Revert deprecation of mfocrf, mtcrf and mtocrf on EFS. f2bae120dcef (PPC_OPCODE_COMMON): Expand comment. 81a0b7e2ae09 (PPCPWR2): Add PPC_OPCODE_COMMON. (powerpc_opcodes): Add "subc" bdc70b4a03fd (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC) 7102e95e4943 (ppc_set_cpu): Cast PPC_OPCODE_xxx to ppc_cpu_t before inverting f383de6633cb (powerpc_opcodes) [lswx,lswi,stswx,stswi]: Deprecate on E500 and E500MC 6b069ee70de3 Remove PPC_OPCODE_PPCPS 2f7f77101279 (powerpc_opcodes): Enable icswx for POWER7 989993d80a97 (insert_nbi, insert_rbx, FRAp, FRBp, FRSp, FRTp, NBI, RAX, RBX) a08fc94222d1 <drrndq, drrndq., dtstexq, dctqpq, dctqpq., dctfixq, dctfixq. 8ebac3aae962 (ISA_V2): Define and use for relevant BO field tests aea77599d0db Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR b240011aba98 (disassemble_init_for_target): Handle ppc init. d668828207c2 (powerpc_opcd_indices): Bump array size b9c361e0ad33 Add support for PowerPC VLE. e1dad58d73dc (has_tls_reloc, has_tls_get_addr_call, has_vle_insns, is_ppc_vle) df7b86aa4cb6 Add check that sysdep.h has been included before 98c76446ea6b (extract_sprg): Use ALLOW8_SPRG to include VLE. a4ebc835cbcb (powerpc_macros): Add entries for e_extlwi to e_clrlslwi 94caa966375d (has_vle_insns, is_ppc_vle): Delete c7a8dbf91f37 Change RA to RA0 d908c8af5a1d Add necessary casts for printing integer values 03edbe3bfb93 Add/remove PPCVLE for some 32-bit insns 9f6a6cc022e1 <xnop, yield, mdoio, mdoom>: New extended mnemonics 588925d06545 <RSQ, RTQ>: Use PPC_OPERAND_GPR 8baf7b78b5d9 <"lswx">: Use RAX for the second and RBX for the third operand e67ed0e885d6 Changed opcode for vabsdub, vabsduh, vabsduw, mviwsplt fb048c26f19f (UIMM4, UIMM3, UIMM2, VXVA_MASK, VXVB_MASK, VXVAVB_MASK, VXVDVA_MASK 382c72e90441 (VXASHB_MASK): New define c7a5aa9c64fc (ppc_opts) <altivec>: Use PPC_OPCODE_ALTIVEC2 ab4437c3224f <vcfpsxws>: Fix opcode spelling 62082a42b9cd "lfdp" and "stfdp" use DS offset. 776fc41826bb (ppc_parse_cpu): Update prototype 943d398f4c52 (insert_sci8, extract_sci8): Rewrite. 5817ffd1f81c New define (PPC_OPCODE_HTM/POWER8) 9f0682fe89d9 (extract_vlesi): Properly sign extend c0637f3af686 (powerpc_init_dialect): Set default dialect to power8. 58ae08f29af8 (powerpc_opcodes): Add tdui, twui, tdu, twu, tui, tu 4f6ffcd38d90 (powerpc_init_dialect): Use ppc_parse_cpu() to set dialect 4b95cf5c0c75 Update copyright years a47622ac1bad Allow both signed and unsigned fields in PowerPC cmpli insn 12e87fac5c76 ppc: enable msgclr and msgsnd on Power8 8514e4db84cc Don't deprecate powerpc mftb insn db76a70026ab Power4 should treat mftb as extended mfspr mnemonic b90efa5b79ac ChangeLog rotatation and copyright year update c4e676f19656 powerpc: Add slbfee. instruction 27c49e9a8fc0 powerpc: Only initialise opcode indices once 4fff86c517ab DCBT_EO): New define 4bc0608a8b69 Fix some PPC assembler errors dc302c00611b Add hwsync extended mnemonic 99a2c5612124 Remove unused MTMSRD_L macro and re-add accidentally deleted comment 11a0cf2ec0ed Allow for optional operands with non-zero default values 7b9341139a69 PPC sync instruction accepts invalid and incompatible operands ef5a96d564a2 Remove ppc860, ppc750cl, ppc7450 insns from common ppc 43e65147c07b Remove trailing spaces in opcodes 6dca4fd141fd Add dscr and ctrl SPR mnemonics b6518b387185 Fix compile time warnings generated when compiling with clang 36f7a9411dcd Patches for illegal ppc 500 instructions a680de9a980e Add assembler, disassembler and linker support for power9 dd2887fc3de4 Reorder some power9 insns b817670b52b7 Enable 2 operand form of powerpc mfcr with -many 6f2750feaf28 Copyright update for binutils afa8d4054b8e Delete opcodes that have been removed from ISA 3.0 1178da445ad5 Accept valid one byte signed and unsigned values for the IMM8 operand e43de63c8fd1 Fix powerpc subis range 514e58b72633 Correct "Fix powerpc subis range" 19dfcc89e8d9 Add support for new POWER ISA 3.0 instructions 1fe0971e41a4 add more extern C 026122a67044 Re-add support for lbarx, lharx, stbcx. and sthcx. insns back to the E6500 cpu 14b57c7c6a53 PowerPC VLE 6fd3a02da554 Add support for yet some more new ISA 3.0 instructions dfdaec14b0db Fix some PowerPC VLE BFD issues and add some PowerPC VLE instructions fd486b633e87 Modify POWER9 support to match final ISA 3.0 documentation a5721ba270dd Disallow 3-operand cmp[l][i] for ppc64 This updates the disassembly capabilities to add support for newer processors. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Reformat commit list for brevity] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Balbir Singh authored
Upgrade ppc-opc.c, ppc-dis.c and ppc.h to the versions belonging to the following binutils commit: 65b650b4c7463f4508bed523c24ab0031a5ae5cd * ppc-dis.c (print_insn_powerpc): Don't skip all operands after setting skip_optional. That is the last version of those files that were licensed under GPLv2. This leaves the code in a state that does not compile, because the binutils code needs to be tweaked to work in the kernel. We don't fix that in this commit, because we want to import more binutils changes in subsequent commits. So for now we mark XMON_DISASSEMBLY as BROKEN, so it can't be built. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
We do them at the start of tlb flush, and we are sure a pte update will be followed by a tlbflush. Hence we can skip the ptesync in pte update helpers. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This helps us to do some optimization for application exit case, where we can skip the DD1 style pte update sequence. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
In the kernel we do follow the below sequence in different code paths. pte = ptep_get_clear(ptep) .... set_pte_at(ptep, pte) We do that for mremap, autonuma protection update and softdirty clearing. This implies our optimization to skip a tlb flush when clearing a pte update is not valid, because for DD1 system that followup set_pte_at will be done witout doing the required tlbflush. Fix that by always doing the dd1 style pte update irrespective of new_pte value. In a later patch we will optimize the application exit case. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
With radix, we can get page fault with DSISR_PROTFAULT value set in case of PROT_NONE or autonuma mapping. The PROT_NONE case in handled by the vma check where we consider the access bad. For autonuma we should fall through and fixup the access mask correctly. Without this patch we trigger the WARN_ON() on radix. This code moves that WARN_ON() within a radix_enabled() check. I also moved the WARN_ON() outside the if condition making it apply for all type of faults (exec/write/read). It is also conditionalized for book3s, because BOOK3E can also get a PROTFAULT to handle the D/I cache sync. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Ravi Bangoria authored
Currently xmon data-breakpoint feature is broken. Whenever there is a watchpoint match occurs, hw_breakpoint_handler will be called by do_break via notifier chains mechanism. If watchpoint is registered by xmon, hw_breakpoint_handler won't find any associated perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break also returns without notifying to xmon. Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not find any perf_event associated with matched watchpoint, rather than NOTIFY_STOP, which tells the core code to continue calling the other breakpoint handlers including the xmon one. Cc: stable@vger.kernel.org Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
The recently merged HPT (Hash Page Table) resize support broke the build when BOOK3S_64=n (ie. 32-bit or 64-bit Book3E) and MEMORY_HOTPLUG=y: arch/powerpc/mm/mem.o: In function `.arch_add_memory': (.text+0x4e4): undefined reference to `.resize_hpt_for_hotplug' Fix it by adding a dummy version. Fixes: 438cc81a ("powerpc/pseries: Automatically resize HPT for memory hot add/remove") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 14 Feb, 2017 3 commits
-
-
Michael Ellerman authored
Merge the topic branch we're sharing with the kvm-ppc tree.
-
Michael Ellerman authored
Currently the build breaks if CMA=n and SPAPR_TCE_IOMMU=y: arch/powerpc/mm/mmu_context_iommu.c: In function ‘mm_iommu_get’: arch/powerpc/mm/mmu_context_iommu.c:193:42: error: ‘MIGRATE_CMA’ undeclared (first use in this function) if (get_pageblock_migratetype(page) == MIGRATE_CMA) { ^~~~~~~~~~~ Fix it by using the existing is_migrate_cma_page(), which evaulates to false when CMA=n. Fixes: 2e5bbb54 ("KVM: PPC: Book3S HV: Migrate pinned pages out of CMA") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
If we enable RADIX but disable HUGETLBFS, the build breaks with: arch/powerpc/mm/pgtable-radix.c:557:7: error: implicit declaration of function 'pmd_huge' arch/powerpc/mm/pgtable-radix.c:588:7: error: implicit declaration of function 'pud_huge' Fix it by stubbing those functions when HUGETLBFS=n. Fixes: 4b5d62ca ("powerpc/mm: add radix__remove_section_mapping()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
- 10 Feb, 2017 11 commits
-
-
Wei Yongjun authored
Fix typo in "hotplug_delay" parameter description. This allows modinfo to match the help text to the parameter. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Naveen N. Rao authored
... as the generic weak variant will do. Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Naveen N. Rao authored
kprobe_exceptions_notify() is not used on some of the architectures such as arm[64] and powerpc anymore. Introduce a weak variant for such architectures. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
The final paragraph of the help text is reversed. We want to enable this option by default, and disable it if the toolchain has a working -mprofile-kernel. Fixes: 8c50b72a ("powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel") Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Currently the opal_exit tracepoint usually shows the opcode as 0: <idle>-0 [047] d.h. 635.654292: opal_entry: opcode=63 <idle>-0 [047] d.h. 635.654296: opal_exit: opcode=0 retval=0 kopald-1209 [019] d... 636.420943: opal_entry: opcode=10 kopald-1209 [019] d... 636.420959: opal_exit: opcode=0 retval=0 This is because we incorrectly load the opcode into r0 before calling __trace_opal_exit(), whereas it expects the opcode in r3 (first function parameter). In fact we are leaving the retval in r3, so opcode and retval will always show the same value. Instead load the opcode into r3, resulting in: <idle>-0 [040] d.h. 636.618625: opal_entry: opcode=63 <idle>-0 [040] d.h. 636.618627: opal_exit: opcode=63 retval=0 Fixes: c49f6353 ("powernv: Add OPAL tracepoints") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Currently we get a warning that _mcount() can't be versioned: WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned. Add a prototype to asm-prototypes.h to fix it. The prototype is not really correct, mcount() is not a normal function, it has a special ABI. But for the purpose of versioning it doesn't matter. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Shailendra Singh authored
The generic implementation of of_node_to_nid() is EXPORT_SYMBOL, added in commit 298535c0 ("of, numa: Add NUMA of binding implementation."). The powerpc implementation added in commit 953039c8 ("[PATCH] powerpc: Allow devices to register with numa topology") is EXPORT_SYMBOL_GPL. This creates an inconsistency for of_node_to_nid() callers across architectures. Update the powerpc implementation to be exported consistently with the generic implementation. Signed-off-by: Shailendra Singh <shailendras@nvidia.com> Reviewed-by: Andy Ritger <aritger@nvidia.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Anju T authored
Kprobe placed on the kretprobe_trampoline() during boot time can be optimized, since the instruction at probe point is a 'nop'. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Anju T authored
Current infrastructure of kprobe uses the unconditional trap instruction to probe a running kernel. Optprobe allows kprobe to replace the trap with a branch instruction to a detour buffer. Detour buffer contains instructions to create an in memory pt_regs. Detour buffer also has a call to optimized_callback() which in turn call the pre_handler(). After the execution of the pre-handler, a call is made for instruction emulation. The NIP is determined in advanced through dummy instruction emulation and a branch instruction is created to the NIP at the end of the trampoline. To address the limitation of branch instruction in POWER architecture, detour buffer slot is allocated from a reserved area. For the time being, 64KB is reserved in memory for this purpose. Instructions which can be emulated using analyse_instr() are the candidates for optimization. Before optimization ensure that the address range between the detour buffer allocated and the instruction being probed is within +/- 32MB. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Naveen N. Rao authored
Fix two issues with kprobes.h on BE which were exposed with the optprobes work: - one, having to do with a missing include for linux/module.h for MODULE_NAME_LEN -- this didn't show up previously since the only users of kprobe_lookup_name were in kprobes.c, which included linux/module.h through other headers, and - two, with a missing const qualifier for a local variable which ends up referring a string literal. Again, this is unique to how kprobe_lookup_name is being invoked in optprobes.c Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Anju T authored
To permit the use of relative branch instruction in powerpc, the target address has to be relatively nearby, since the address is specified in an immediate field (24 bit filed) in the instruction opcode itself. Here nearby refers to 32MB on either side of the current instruction. This patch verifies whether the target address is within +/- 32MB range or not. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-