- 17 Nov, 2014 37 commits
-
-
Richard Genoud authored
commit 1bf1890e upstream. I ran into this error after a ubiupdatevol, because I forgot to backport e9110361 UBI: fix the volumes tree sorting criteria. UBI error: process_pool_aeb: orphaned volume in fastmap pool UBI error: ubi_scan_fastmap: Attach by fastmap failed, doing a full scan! kmem_cache_destroy ubi_ainf_peb_slab: Slab cache still has objects CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.18-00053-gf05cac8dbf85 #1 [<c000d298>] (unwind_backtrace) from [<c000baa8>] (show_stack+0x10/0x14) [<c000baa8>] (show_stack) from [<c01b7a68>] (destroy_ai+0x230/0x244) [<c01b7a68>] (destroy_ai) from [<c01b8fd4>] (ubi_attach+0x98/0x1ec) [<c01b8fd4>] (ubi_attach) from [<c01ade90>] (ubi_attach_mtd_dev+0x2b8/0x868) [<c01ade90>] (ubi_attach_mtd_dev) from [<c038b510>] (ubi_init+0x1dc/0x2ac) [<c038b510>] (ubi_init) from [<c0008860>] (do_one_initcall+0x94/0x140) [<c0008860>] (do_one_initcall) from [<c037aadc>] (kernel_init_freeable+0xe8/0x1b0) [<c037aadc>] (kernel_init_freeable) from [<c02730ac>] (kernel_init+0x8/0xe4) [<c02730ac>] (kernel_init) from [<c00093f0>] (ret_from_fork+0x14/0x24) UBI: scanning is finished Freeing the cache in the error path fixes the Slab error. Tested on at91sam9g35 (3.14.18+fastmap backports) Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Dan Streetman authored
commit 10ccaf17 upstream. In powerpc pseries platform dlpar operations, use device_online() and device_offline() instead of cpu_up() and cpu_down(). Calling cpu_up/down() directly does not update the cpu device offline field, which is used to online/offline a cpu from sysfs. Calling device_online/offline() instead keeps the sysfs cpu online value correct. The hotplug lock, which is required to be held when calling device_online/offline(), is already held when dlpar_online/offline_cpu() are called, since they are called only from cpu_probe|release_store(). This patch fixes errors on phyp (PowerVM) systems that have cpu(s) added/removed using dlpar operations; without this patch, the /sys/devices/system/cpu/cpuN/online nodes do not correctly show the online state of added/removed cpus. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Fixes: 0902a904 ("Driver core: Use generic offline/online for CPU offline/online") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Sinclair Yeh authored
commit 9a72384d upstream. When screen objects are enabled, the bpp is assumed to be 32, otherwise it is set to 16. v2: * Use u32 instead of u64 for assumed_bpp. * Fixed mechanism to check for screen objects * Limit the back buffer size to VRAM. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Kirill Tkhai authored
commit f1e3a093 upstream. Probability of use-after-free isn't zero in this place. Signed-off-by:
Kirill Tkhai <ktkhai@parallels.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140922183636.11015.83611.stgit@localhostSigned-off-by:
Ingo Molnar <mingo@kernel.org> [ luis: backported to 3.16: used peterz's backport to 3.17 ] Signed-off-by:
-
Stephen Boyd authored
commit 8b374399 upstream. Frank reports that after continuing in kgdb the RX stale event doesn't occur until after the RX fifo is filled up with exactly the amount of characters programmed for the RX watermark (in this case it's 48). To read a single character from the uartdm hardware we force a stale event so that any characters in the RX packing buffer are flushed into the RX fifo immediately instead of waiting for a stale timeout or for the fifo to fill. Forcing that stale event asserts the stale interrupt but we never clear that interrupt via UART_CR_CMD_RESET_STALE_INT in the polling functions. So when kgdb continues the stale interrupt is left pending in the hardware and we don't timeout with a stale event, like we usually would if a user typed one character on the console, until the reset stale interrupt and stale event commands are sent. Frank could get things working again by running handle_rx_dm(). By putting enough characters into the fifo he could trigger a watermark interrupt, and thus cause handle_rx_dm() to run finally resetting the stale interrupt and enabling the stale event so that single characters would cause timeouts again. The fix is to just do what the interrupt routine was doing all along and clear the stale interrupt and enable the event again. Doing this also smooths over any differences in the fifo behavior between v1.3 and v1.4 hardware allowing us to skip forcing the uart into single character mode. Reviewed-by:
Frank Rowand <frank.rowand@sonymobile.com> Tested-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Bryan O'Donoghue authored
commit aece118e upstream. Intel processors which don't report cache information via cpuid(2) or cpuid(4) need quirk code in the legacy_cache_size callback to report this data. For Intel that callback is is intel_size_cache(). This patch enables calling of cpu_detect_cache_sizes() inside of init_intel() and hence the calling of the legacy_cache callback in intel_size_cache(). Adding this call will ensure that PIII Tualatin currently in intel_size_cache() and Quark SoC X1000 being added to intel_size_cache() in this patch will report their respective cache sizes. This model of calling cpu_detect_cache_sizes() is consistent with AMD/Via/Cirix/Transmeta and Centaur. Also added is a string to idenitfy the Quark as Quark SoC X1000 giving better and more descriptive output via /proc/cpuinfo Adding cpu_detect_cache_sizes to init_intel() will enable calling of intel_size_cache() on Intel processors which currently no code can reach. Therefore this patch will also re-enable reporting of PIII Tualatin cache size information as well as add Quark SoC X1000 support. Comment text and cache flow logic suggested by Thomas Gleixner Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: davej@redhat.com Cc: hmh@hmh.eng.br Link: http://lkml.kernel.org/r/1412641189-12415-3-git-send-email-pure.logic@nexus-software.ieSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Axel Lin authored
commit 91ba0e59 upstream. Fix a copy-paste bug when converting to the control framework. Fixes: commit 5d478e0d ("[media] tda7432: convert to the control framework") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Antti Palosaari authored
commit f538e085 upstream. Maximum satellite symbol rate used is 45000000Sps which overflows when multiplied by 135. As final calculation result is fraction, we could use mult_frac macro in order to keep calculation inside 32 bit number limits and prevent overflow. Original bug and fix was provided by Nibble Max. I decided to implement it differently as it is now. Reported-by:
Nibble Max <nibble.max@gmail.com> Tested-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 29bbb7bd upstream. Add support for PCTV microStick (77e) device that uses a sms1140 chipset. Signed-off-by:
-
Paul Fertser authored
commit 62ea864f upstream. As reported on [1], this device needs this quirk to be able to reliably initialise the webcam. [1] http://ubuntuforums.org/showthread.php?t=2145996Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Maciej Matraszek authored
commit 3bacc10c upstream. Fix clamp_align() used in v4l_bound_align_image() to prevent overflow when passed large value like UINT32_MAX. In the current implementation: clamp_align(UINT32_MAX, 8, 8192, 3) returns 8, because in line: x = (x + (1 << (align - 1))) & mask; x overflows to (-1 + 4) & 0x7 = 3, while expected value is 8192. v4l_bound_align_image() is heavily used in VIDIOC_S_FMT and VIDIOC_SUBDEV_S_FMT ioctls handlers, and documentation of the latter explicitly states that: "The modified format should be as close as possible to the original request." -- http://linuxtv.org/downloads/v4l-dvb-apis/vidioc-subdev-g-fmt.html Thus one would expect, that passing UINT32_MAX as format width and height will result in setting maximum possible resolution for the device. Particularly, when the driver doesn't support VIDIOC_ENUM_FRAMESIZES ioctl, which is common in the codebase. Fixes changeset: b0d3159bSigned-off-by:
Maciej Matraszek <m.matraszek@samsung.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Josh Boyer authored
commit e351943b upstream. The userspace drm.h include doesn't prefix the drm directory. This can lead to compile failures as /usr/include/drm/ isn't in the standard gcc include paths. Fix it to be <drm/drm.h>, which matches the rest of the driver drm header files that get installed into /usr/include/drm. Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1138759 Fixes: 1d7a5cbfReported-by:
Jeffrey Bastian <jbastian@redhat.com> Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Tvrtko Ursulin authored
commit c479f438 upstream. sg_alloc_table_from_pages() can build us a table with coalesced ranges which means we need to iterate over pages and not sg table entries when releasing page references. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Barbalho, Rafael" <rafael.barbalho@intel.com> Tested-by:
Rafael Barbalho <rafael.barbalho@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> [danvet: Remove unused local variable sg.] Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
Emil Velikov authored
commit b485a700 upstream. nv92 hardware has only 16 interrupt lines, while nv94 and later has 32. Accessing 0xe0c{0,4} registers on nv92 can lead to incorrect PDISP setup. This is a regression introduced with commit 9d0f5ec9ee0fd5dc5fc1cc2cf559286431e406e3 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon May 12 15:22:42 2014 +1000 gpio: split g92 class from nv50 Reported-by: estece on #nouveau Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 1e99cfa8 upstream. The translation from the X driver to the KMS one typo'ed a couple of array indices, causing the HW cursor to look weird (blocky with leaking edge colors). This fixes it. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Hans de Goede authored
commit 9ff84a17 upstream. Without this the aux port does not get detected, and consequently the touchpad will not work. https://bugzilla.redhat.com/show_bug.cgi?id=1110011Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit aa972409 upstream. Unfortunately, ForcePad capability is not actually exported over PS/2, so we have to resort to DMI checks. Reported-by:
Nicole Faerber <nicole.faerber@kernelconcepts.de> Signed-off-by:
-
Mikulas Patocka authored
commit f74a289b upstream. The framebuffer code uses the current background color to fill the border when switching consoles, however, this results in inconsistent behavior. For example: - start Midnigh Commander - the border is black - switch to another console and switch back - the border is cyan - type something into the command line in mc - the border is cyan - switch to another console and switch back - the border is black - press F9 to go to menu - the border is black - switch to another console and switch back - the border is dark blue When switching to a console with Midnight Commander, the border is random color that was left selected by the slang subsystem. This patch fixes this inconsistency by always using black as the background color when switching consoles. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Mikulas Patocka authored
commit 5b789da8 upstream. The function bitcpy_rev has a bug that may result in screen corruption. The bug happens under these conditions: * the end of the destination area of a copy operation is aligned on a long word boundary * the end of the source area is not aligned on a long word boundary * we are copying more than one long word In this case, the variable shift is non-zero and the variable first is zero. The statements FB_WRITEL(comp(d0, FB_READL(dst), first), dst) reads the last long word of the destination and writes it back unchanged (because first is zero). Correctly, we should write the variable d0 to the last word of the destination in this case. This patch fixes the bug by introducing and extra test if first is zero. The patch also removes the references to fb_memmove in the code that is commented out because fb_memmove was removed from framebuffer subsystem. Signed-off-by:
-
Prarit Bhargava authored
commit d3051b48 upstream. A panic was seen in the following sitation. There are two threads running on the system. The first thread is a system monitoring thread that is reading /proc/modules. The second thread is loading and unloading a module (in this example I'm using my simple dummy-module.ko). Note, in the "real world" this occurred with the qlogic driver module. When doing this, the following panic occurred: ------------[ cut here ]------------ kernel BUG at kernel/module.c:3739! invalid opcode: 0000 [#1] SMP Modules linked in: binfmt_misc sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw igb gf128mul glue_helper iTCO_wdt iTCO_vendor_support ablk_helper ptp sb_edac cryptd pps_core edac_core shpchp i2c_i801 pcspkr wmi lpc_ich ioatdma mfd_core dca ipmi_si nfsd ipmi_msghandler auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm isci drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: dummy_module] CPU: 37 PID: 186343 Comm: cat Tainted: GF O-------------- 3.10.0+ #7 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013 task: ffff8807fd2d8000 ti: ffff88080fa7c000 task.ti: ffff88080fa7c000 RIP: 0010:[<ffffffff810d64c5>] [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP: 0018:ffff88080fa7fe18 EFLAGS: 00010246 RAX: 0000000000000003 RBX: ffffffffa03b5200 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffff88080fa7fe38 RDI: ffffffffa03b5000 RBP: ffff88080fa7fe28 R08: 0000000000000010 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000000f R12: ffffffffa03b5000 R13: ffffffffa03b5008 R14: ffffffffa03b5200 R15: ffffffffa03b5000 FS: 00007f6ae57ef740(0000) GS:ffff88101e7a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000404f70 CR3: 0000000ffed48000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa03b5200 ffff8810101e4800 ffff88080fa7fe70 ffffffff810d666c ffff88081e807300 000000002e0f2fbf 0000000000000000 ffff88100f257b00 ffffffffa03b5008 ffff88080fa7ff48 ffff8810101e4800 ffff88080fa7fee0 Call Trace: [<ffffffff810d666c>] m_show+0x19c/0x1e0 [<ffffffff811e4d7e>] seq_read+0x16e/0x3b0 [<ffffffff812281ed>] proc_reg_read+0x3d/0x80 [<ffffffff811c0f2c>] vfs_read+0x9c/0x170 [<ffffffff811c1a58>] SyS_read+0x58/0xb0 [<ffffffff81605829>] system_call_fastpath+0x16/0x1b Code: 48 63 c2 83 c2 01 c6 04 03 29 48 63 d2 eb d9 0f 1f 80 00 00 00 00 48 63 d2 c6 04 13 2d 41 8b 0c 24 8d 50 02 83 f9 01 75 b2 eb cb <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 RIP [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP <ffff88080fa7fe18> Consider the two processes running on the system. CPU 0 (/proc/modules reader) CPU 1 (loading/unloading module) CPU 0 opens /proc/modules, and starts displaying data for each module by traversing the modules list via fs/seq_file.c:seq_open() and fs/seq_file.c:seq_read(). For each module in the modules list, seq_read does op->start() <-- this is a pointer to m_start() op->show() <- this is a pointer to m_show() op->stop() <-- this is a pointer to m_stop() The m_start(), m_show(), and m_stop() module functions are defined in kernel/module.c. The m_start() and m_stop() functions acquire and release the module_mutex respectively. ie) When reading /proc/modules, the module_mutex is acquired and released for each module. m_show() is called with the module_mutex held. It accesses the module struct data and attempts to write out module data. It is in this code path that the above BUG_ON() warning is encountered, specifically m_show() calls static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); ... The other thread, CPU 1, in unloading the module calls the syscall delete_module() defined in kernel/module.c. The module_mutex is acquired for a short time, and then released. free_module() is called without the module_mutex. free_module() then sets mod->state = MODULE_STATE_UNFORMED, also without the module_mutex. Some additional code is called and then the module_mutex is reacquired to remove the module from the modules list: /* Now we can delete it from the lists */ mutex_lock(&module_mutex); stop_machine(__unlink_module, mod, NULL); mutex_unlock(&module_mutex); This is the sequence of events that leads to the panic. CPU 1 is removing dummy_module via delete_module(). It acquires the module_mutex, and then releases it. CPU 1 has NOT set dummy_module->state to MODULE_STATE_UNFORMED yet. CPU 0, which is reading the /proc/modules, acquires the module_mutex and acquires a pointer to the dummy_module which is still in the modules list. CPU 0 calls m_show for dummy_module. The check in m_show() for MODULE_STATE_UNFORMED passed for dummy_module even though it is being torn down. Meanwhile CPU 1, which has been continuing to remove dummy_module without holding the module_mutex, now calls free_module() and sets dummy_module->state to MODULE_STATE_UNFORMED. CPU 0 now calls module_flags() with dummy_module and ... static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); and BOOM. Acquire and release the module_mutex lock around the setting of MODULE_STATE_UNFORMED in the teardown path, which should resolve the problem. Testing: In the unpatched kernel I can panic the system within 1 minute by doing while (true) do insmod dummy_module.ko; rmmod dummy_module.ko; done and while (true) do cat /proc/modules; done in separate terminals. In the patched kernel I was able to run just over one hour without seeing any issues. I also verified the output of panic via sysrq-c and the output of /proc/modules looks correct for all three states for the dummy_module. dummy_module 12661 0 - Unloading 0xffffffffa03a5000 (OE-) dummy_module 12661 0 - Live 0xffffffffa03bb000 (OE) dummy_module 14015 1 - Loading 0xffffffffa03a5000 (OE+) Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Alexey Khoroshilov authored
commit 56ec16cb upstream. If cn_add_callback() fails in dm_ulog_tfr_init(), it does not deallocate prealloced memory but calls cn_del_callback(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit b8839b8c upstream. The math in both blk_stack_limits() and queue_limit_alignment_offset() assume that a block device's io_min (aka minimum_io_size) is always a power-of-2. Fix the math such that it works for non-power-of-2 io_min. This issue (of alignment_offset != 0) became apparent when testing dm-thinp with a thinp blocksize that matches a RAID6 stripesize of 1280K. Commit fdfb4c8c ("dm thin: set minimum_io_size to pool's data block size") unlocked the potential for alignment_offset != 0 due to the dm-thin-pool's io_min possibly being a non-power-of-2. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Lai Jiangshan authored
commit 82cfb90b upstream. Commit 98683650 "Merge branch 'drbd-8.4_ed6' into for-3.8-drivers-drbd-8.4_ed6" switches to the new augment API, but the new API requires that the tree is augmented before rb_insert_augmented() is called, which is missing. So we add the augment-code to drbd_insert_interval() when it travels the tree up to down before rb_insert_augmented(). See the example in include/linux/interval_tree_generic.h or Documentation/rbtree.txt. drbd_insert_interval() may cancel the insertion when traveling, in this case, the just added augment-code does nothing before cancel since the @this node is already in the subtrees in this case. CC: Michel Lespinasse <walken@google.com> Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Andreas Gruenbacher <agruen@linbit.com> Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
-
Mikulas Patocka authored
commit 0e825862 upstream. When __scan frees the required number of buffer entries that the shrinker requested (nr_to_scan becomes zero) it must return. Before this fix the __scan code exited only the inner loop and continued in the outer loop -- which could result in reduced performance due to extra buffers being freed (e.g. unnecessarily evicted thinp metadata needing to be synchronously re-read into bufio's cache). Also, move dm_bufio_cond_resched to __scan's inner loop, so that iterating the bufio client's lru lists doesn't result in scheduling latency. Reported-by:
Joe Thornber <thornber@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit eb76faf5 upstream. The 'last_accessed' member of the dm_buffer structure was only set when the the buffer was created. This led to each buffer being discarded after dm_bufio_max_age time even if it was used recently. In practice this resulted in all thinp metadata being evicted soon after being read -- this is particularly problematic for metadata intensive workloads like multithreaded small random IO. 'last_accessed' is now updated each time the buffer is moved to the head of the LRU list, so the buffer is now properly discarded if it was not used in dm_bufio_max_age time. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Jens Axboe authored
commit abab13b5 upstream. We currently divide the queue depth by 4 as our batch wakeup count, but we split the wakeups over BT_WAIT_QUEUES number of wait queues. This defaults to 8. If the product of the resulting batch wake count and BT_WAIT_QUEUES is higher than the device queue depth, we can get into a situation where a task goes to sleep waiting for a request, but never gets woken up. Reported-by:
Bart Van Assche <bvanassche@acm.org> Fixes: 4bb659b1Signed-off-by:
-
Vitaly Kuznetsov authored
commit 12ea7296 upstream. blkback does not unmap persistent grants when frontend goes to Closed state (e.g. when blkfront module is being removed). This leads to the following in guest's dmesg: [ 343.243825] xen:grant_table: WARNING: g.e. 0x445 still in use! [ 343.243825] xen:grant_table: WARNING: g.e. 0x42a still in use! ... When load module -> use device -> unload module sequence is performed multiple times it is possible to hit BUG() condition in blkfront module: [ 343.243825] kernel BUG at drivers/block/xen-blkfront.c:954! [ 343.243825] invalid opcode: 0000 [#1] SMP [ 343.243825] Modules linked in: xen_blkfront(-) ata_generic pata_acpi [last unloaded: xen_blkfront] ... [ 343.243825] Call Trace: [ 343.243825] [<ffffffff814111ef>] ? unregister_xenbus_watch+0x16f/0x1e0 [ 343.243825] [<ffffffffa0016fbf>] blkfront_remove+0x3f/0x140 [xen_blkfront] ... [ 343.243825] RIP [<ffffffffa0016aae>] blkif_free+0x34e/0x360 [xen_blkfront] [ 343.243825] RSP <ffff88001eb8fdc0> We don't need to keep these grants if we're disconnecting as frontend might already forgot about them. Solve the issue by moving xen_blkbk_free_caches() call from xen_blkif_free() to xen_blkif_disconnect(). Now we can see the following: [ 928.590893] xen:grant_table: WARNING: g.e. 0x587 still in use! [ 928.591861] xen:grant_table: WARNING: g.e. 0x372 still in use! ... [ 929.592146] xen:grant_table: freeing g.e. 0x587 [ 929.597174] xen:grant_table: freeing g.e. 0x372 ... Backend does not keep persistent grants any more, reconnect works fine. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit 6fbc198c upstream. On restore, virtio pci does the following: + set features + init vqs etc - device can be used at this point! + set ACKNOWLEDGE,DRIVER and DRIVER_OK status bits This is in violation of the virtio spec, which requires the following order: - ACKNOWLEDGE - DRIVER - init vqs - DRIVER_OK This behaviour will break with hypervisors that assume spec compliant behaviour. It seems like a good idea to have this patch applied to stable branches to reduce the support butden for the hypervisors. Cc: Amit Shah <amit.shah@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 661a8886 upstream. NULL pointer exception happens during charger-manager probe if 'cm-fuel-gauge' property is not present. [ 2.448536] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 2.456572] pgd = c0004000 [ 2.459217] [00000000] *pgd=00000000 [ 2.462759] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 2.468047] Modules linked in: [ 2.471089] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc6-00251-ge44cf96cd525-dirty #969 [ 2.479765] task: ea890000 ti: ea87a000 task.ti: ea87a000 [ 2.485161] PC is at strcmp+0x4/0x30 [ 2.488719] LR is at power_supply_match_device_by_name+0x10/0x1c [ 2.494695] pc : [<c01f4220>] lr : [<c030fe38>] psr: a0000113 [ 2.494695] sp : ea87bde0 ip : 00000000 fp : eaa97010 [ 2.506150] r10: 00000004 r9 : ea97269c r8 : ea3bbfd0 [ 2.511360] r7 : eaa97000 r6 : c030fe28 r5 : 00000000 r4 : ea3b0000 [ 2.517869] r3 : 0000006d r2 : 00000000 r1 : 00000000 r0 : c057c195 [ 2.524381] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.531671] Control: 10c5387d Table: 4000404a DAC: 00000015 [ 2.537399] Process swapper/0 (pid: 1, stack limit = 0xea87a240) [ 2.543388] Stack: (0xea87bde0 to 0xea87c000) [ 2.547733] bde0: ea3b0210 c026b1c8 eaa97010 eaa97000 eaa97010 eabb60a8 ea3b0210 00000000 [ 2.555891] be00: 00000008 ea2db210 ea1a3410 c030fee0 ea3bbf90 c03138fc c068969c c013526c [ 2.564050] be20: eaa040c0 00000000 c068969c 00000000 eaa040c0 ea2da300 00000002 00000000 [ 2.572208] be40: 00000001 ea2da3c0 00000000 00000001 00000000 eaa97010 c068969c 00000000 [ 2.580367] be60: 00000000 c068969c 00000000 00000002 00000000 c026b71c c026b6f0 eaa97010 [ 2.588527] be80: c0e82530 c026a330 00000000 eaa97010 c068969c eaa97044 00000000 c061df50 [ 2.596686] bea0: ea87a000 c026a4dc 00000000 c068969c c026a448 c0268b5c ea8054a8 eaa8fd50 [ 2.604845] bec0: c068969c ea2db180 c06801f8 c0269b18 c0590f68 c068969c c0656c98 c068969c [ 2.613004] bee0: c0656c98 ea3bbe40 c06988c0 c026aaf0 00000000 c0656c98 c0656c98 c00088a4 [ 2.621163] bf00: 00000000 c0055f48 00000000 00000004 00000000 ea890000 c05dbc54 c062c178 [ 2.629323] bf20: c0603518 c005f674 00000001 ea87a000 eb7ff83b c0476440 00000091 c003d41c [ 2.637482] bf40: c05db344 00000007 eb7ff858 00000007 c065a76c c0647d24 00000007 c062c170 [ 2.645642] bf60: c06988c0 00000091 c062c178 c0603518 00000000 c0603cc4 00000007 00000007 [ 2.653801] bf80: c0603518 c0c0c0c0 00000000 c0453948 00000000 00000000 00000000 00000000 [ 2.661959] bfa0: 00000000 c0453950 00000000 c000e728 00000000 00000000 00000000 00000000 [ 2.670118] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.678277] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0 [ 2.686454] [<c01f4220>] (strcmp) from [<c030fe38>] (power_supply_match_device_by_name+0x10/0x1c) [ 2.695303] [<c030fe38>] (power_supply_match_device_by_name) from [<c026b1c8>] (class_find_device+0x54/0xac) [ 2.705106] [<c026b1c8>] (class_find_device) from [<c030fee0>] (power_supply_get_by_name+0x1c/0x30) [ 2.714137] [<c030fee0>] (power_supply_get_by_name) from [<c03138fc>] (charger_manager_probe+0x3d8/0xe58) [ 2.723683] [<c03138fc>] (charger_manager_probe) from [<c026b71c>] (platform_drv_probe+0x2c/0x5c) [ 2.732532] [<c026b71c>] (platform_drv_probe) from [<c026a330>] (driver_probe_device+0x10c/0x224) [ 2.741384] [<c026a330>] (driver_probe_device) from [<c026a4dc>] (__driver_attach+0x94/0x98) [ 2.749813] [<c026a4dc>] (__driver_attach) from [<c0268b5c>] (bus_for_each_dev+0x54/0x88) [ 2.757969] [<c0268b5c>] (bus_for_each_dev) from [<c0269b18>] (bus_add_driver+0xd4/0x1d0) [ 2.766123] [<c0269b18>] (bus_add_driver) from [<c026aaf0>] (driver_register+0x78/0xf4) [ 2.774110] [<c026aaf0>] (driver_register) from [<c00088a4>] (do_one_initcall+0x80/0x1bc) [ 2.782276] [<c00088a4>] (do_one_initcall) from [<c0603cc4>] (kernel_init_freeable+0x100/0x1cc) [ 2.790952] [<c0603cc4>] (kernel_init_freeable) from [<c0453950>] (kernel_init+0x8/0xec) [ 2.799029] [<c0453950>] (kernel_init) from [<c000e728>] (ret_from_fork+0x14/0x2c) [ 2.806572] Code: e12fff1e e1a03000 eafffff7 e4d03001 (e4d12001) [ 2.812832] ---[ end trace 7f12556111b9e7ef ]--- Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 856ee611 ("charger-manager: Support deivce tree in charger manager driver") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Stephen Smalley authored
commit 923190d3 upstream. sb_finish_set_opts() can race with inode_free_security() when initializing inode security structures for inodes created prior to initial policy load or by the filesystem during ->mount(). This appears to have always been a possible race, but commit 3dc91d43 ("SELinux: Fix possible NULL pointer dereference in selinux_inode_permission()") made it more evident by immediately reusing the unioned list/rcu element of the inode security structure for call_rcu() upon an inode_free_security(). But the underlying issue was already present before that commit as a possible use-after-free of isec. Shivnandan Kumar reported the list corruption and proposed a patch to split the list and rcu elements out of the union as separate fields of the inode_security_struct so that setting the rcu element would not affect the list element. However, this would merely hide the issue and not truly fix the code. This patch instead moves up the deletion of the list entry prior to dropping the sbsec->isec_lock initially. Then, if the inode is dropped subsequently, there will be no further references to the isec. Reported-by:
Shivnandan Kumar <shivnandan.k@samsung.com> Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Chris Ball authored
commit 51529705 upstream. pci_enable_msi() can return failure with both positive and negative integers -- it returns 0 for success -- but is only tested here for "if (ret < 0)". This causes us to try to use MSI on the RTS5249 SD reader in the Dell XPS 11 when enabling MSI failed, causing: [ 1.737110] rtsx_pci: probe of 0000:05:00.0 failed with error -110 Reported-by:
D. Jared Dominguez <Jared_Dominguez@Dell.com> Tested-by:
Chris Ball <chris@printf.net> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 6a71f38d upstream. In the resume path, the ADC invokes am335x_tsc_se_set_cache() with 0 as the steps argument if continous mode is not in use. This in turn disables all steps and so the TSC is not working until one ADC sampling is performed. This patch fixes it by writing the current cached mask instead of the passed steps. Fixes: 7ca6740c ("mfd: input: iio: ti_amm335x: Rework TSC/ADCA synchronization") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Vignesh R authored
commit 6ac734d2 upstream. After enabling and disabling ADC continuous mode via sysfs, ts_print_raw fails to return any data. This is because when ADC is configured for continuous mode, it disables touch screen steps.These steps are not re-enabled when ADC continuous mode is disabled. Therefore existing values of REG_SE needs to be cached before enabling continuous mode and disabling touch screen steps and enabling ADC steps. The cached value are to be restored to REG_SE once ADC is disabled. Fixes: 7ca6740c ("mfd: input: iio: ti_amm335x: Rework TSC/ADC synchronization") Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Martin Schwidefsky authored
commit 48e9a6c1 upstream. The call to topology_init is too late for the set_sched_topology call. The initial scheduling domain structure has already been established with default topology array. Use the smp_cpus_done() call to get the s390 specific topology array registered early enough. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Thorsten Knabe authored
commit 2a236122 upstream. Starting with Linux 3.12 processes get stuck in D state forever in UserModeLinux under sync heavy workloads. This bug was introduced by commit 805f11a0 (um: ubd: Add REQ_FLUSH suppport). Fix bug by adding a check if FLUSH request was successfully submitted to the I/O thread and keeping the FLUSH request on the request queue on submission failures. Fixes: 805f11a0 (um: ubd: Add REQ_FLUSH suppport) Signed-off-by:
Thorsten Knabe <linux@thorsten-knabe.de> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Kirill Tkhai authored
commit 66339c31 upstream. dl_bw_of() dereferences rq->rd which has to have RCU read lock held. Probability of use-after-free isn't zero here. Also add lockdep assert into dl_bw_cpus(). Signed-off-by:
-
Ilya Dryomov authored
commit f9865f06 upstream. Commit f363e45f ("net/ceph: make ceph_msgr_wq non-reentrant") effectively removed WQ_MEM_RECLAIM flag from ceph_msgr_wq. This is wrong - libceph is very much a memory reclaim path, so restore it. Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Tested-by:
Micha Krause <micha@krausam.de> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
- 14 Nov, 2014 3 commits
-
-
Al Viro authored
commit 24dff96a upstream. we used to check for "nobody else could start doing anything with that opened file" by checking that refcount was 2 or less - one for descriptor table and one we'd acquired in fget() on the way to wherever we are. That was race-prone (somebody else might have had a reference to descriptor table and do fget() just as we'd been checking) and it had become flat-out incorrect back when we switched to fget_light() on those codepaths - unlike fget(), it doesn't grab an extra reference unless the descriptor table is shared. The same change allowed a race-free check, though - we are safe exactly when refcount is less than 2. It was a long time ago; pre-2.6.12 for ioctl() (the codepath leading to ppp one) and 2.6.17 for sendmsg() (netlink one). OTOH, netlink hadn't grown that check until 3.9 and ppp used to live in drivers/net, not drivers/net/ppp until 3.1. The bug existed well before that, though, and the same fix used to apply in old location of file. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit 99358a1c upstream. schedule_delayed_work() happening when the work is already pending is a cheap no-op. Don't bother with ->wbuf_queued logics - it's both broken (cancelling ->wbuf_dwork leaves it set, as spotted by Jeff Harris) and pointless. It's cheaper to let schedule_delayed_work() handle that case. Reported-by:
Jeff Harris <jefftharris@gmail.com> Tested-by:
-
Al Viro authored
commit 6d13f694 upstream. AFAICS, prepend_name() is broken on SMP alpha. Disclaimer: I don't have SMP alpha boxen to reproduce it on. However, it really looks like the race is real. CPU1: d_path() on /mnt/ramfs/<255-character>/foo CPU2: mv /mnt/ramfs/<255-character> /mnt/ramfs/<63-character> CPU2 does d_alloc(), which allocates an external name, stores the name there including terminating NUL, does smp_wmb() and stores its address in dentry->d_name.name. It proceeds to d_add(dentry, NULL) and d_move() old dentry over to that. ->d_name.name value ends up in that dentry. In the meanwhile, CPU1 gets to prepend_name() for that dentry. It fetches ->d_name.name and ->d_name.len; the former ends up pointing to new name (64-byte kmalloc'ed array), the latter - 255 (length of the old name). Nothing to force the ordering there, and normally that would be OK, since we'd run into the terminating NUL and stop. Except that it's alpha, and we'd need a data dependency barrier to guarantee that we see that store of NUL __d_alloc() has done. In a similar situation dentry_cmp() would survive; it does explicit smp_read_barrier_depends() after fetching ->d_name.name. prepend_name() doesn't and it risks walking past the end of kmalloc'ed object and possibly oops due to taking a page fault in kernel mode. Signed-off-by:
-
