- 19 Nov, 2014 24 commits
-
-
James Ralston authored
commit 690000b9 upstream. This patch adds the AHCI-mode SATA Device IDs for the Intel Sunrise Point PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Miklos Szeredi authored
commit 799b6014 upstream. Audit rules disappear when an inode they watch is evicted from the cache. This is likely not what we want. The guilty commit is "fsnotify: allow marks to not pin inodes in core", which didn't take into account that audit_tree adds watches with a zero mask. Adding any mask should fix this. Fixes: 90b1e7a5 ("fsnotify: allow marks to not pin inodes in core") Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit 81f49a8f upstream. is_compat_task() is the wrong check for audit arch; the check should be is_ia32_task(): x32 syscalls should be AUDIT_ARCH_X86_64, not AUDIT_ARCH_I386. CONFIG_AUDITSYSCALL is currently incompatible with x32, so this has no visible effect. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/a0138ed8c709882aec06e4acc30bfa9b623b8717.1409954077.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Herbert Xu authored
commit a8f9bfdf upstream. When VLAN acceleration is in use on the xmit path, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN acceleration is detected. Fixes: 6680ec68 ("tuntap: hardware vlan tx support") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Greg Kurz authored
commit 24c65bc7 upstream. The add_early_randomness() function in drivers/char/hw_random/core.c passes a 16-byte buffer to pseries_rng_data_read(). Unfortunately, plpar_hcall() returns four 64-bit values and trashes 16 bytes on the stack. This bug has been lying around for a long time. It got unveiled by: commit d3cc7996 Author: Amit Shah <amit.shah@redhat.com> Date: Thu Jul 10 15:42:34 2014 +0530 hwrng: fetch randomness only after device init It may trig a oops while loading or unloading the pseries-rng module for both PowerVM and PowerKVM guests. This patch does two things: - pass an intermediate well sized buffer to plpar_hcall(). This is acceptalbe since we're not on a hot path. - move to the new read API so that we know the return buffer size for sure. Signed-off-by:
Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by:
-
Cristian Stoica authored
commit 307fd543 upstream. Replace equivalent (and partially incorrect) scatter-gather functions with ones from crypto-API. The replacement is motivated by page-faults in sg_copy_part triggered by successive calls to crypto_hash_update. The following fault appears after calling crypto_ahash_update twice, first with 13 and then with 285 bytes: Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xf9bf9a8c Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 CoreNet Generic Modules linked in: tcrypt(+) caamhash caam_jr caam tls CPU: 6 PID: 1497 Comm: cryptomgr_test Not tainted 3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2 #75 task: e9308530 ti: e700e000 task.ti: e700e000 NIP: f9bf9a8c LR: f9bfcf28 CTR: c0019ea0 REGS: e700fb80 TRAP: 0300 Not tainted (3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2) MSR: 00029002 <CE,EE,ME> CR: 44f92024 XER: 20000000 DEAR: 00000008, ESR: 00000000 GPR00: f9bfcf28 e700fc30 e9308530 e70b1e55 00000000 ffffffdd e70b1e54 0bebf888 GPR08: 902c7ef5 c0e771e2 00000002 00000888 c0019ea0 00000000 00000000 c07a4154 GPR16: c08d0000 e91a8f9c 00000001 e98fb400 00000100 e9c83028 e70b1e08 e70b1d48 GPR24: e992ce10 e70b1dc8 f9bfe4f4 e70b1e55 ffffffdd e70b1ce0 00000000 00000000 NIP [f9bf9a8c] sg_copy+0x1c/0x100 [caamhash] LR [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash] Call Trace: [e700fc30] [f9bf9c50] sg_copy_part+0xe0/0x160 [caamhash] (unreliable) [e700fc50] [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash] [e700fcb0] [f954e19c] crypto_tls_genicv+0x13c/0x300 [tls] [e700fd10] [f954e65c] crypto_tls_encrypt+0x5c/0x260 [tls] [e700fd40] [c02250ec] __test_aead.constprop.9+0x2bc/0xb70 [e700fe40] [c02259f0] alg_test_aead+0x50/0xc0 [e700fe60] [c02241e4] alg_test+0x114/0x2e0 [e700fee0] [c022276c] cryptomgr_test+0x4c/0x60 [e700fef0] [c004f658] kthread+0x98/0xa0 [e700ff40] [c000fd04] ret_from_kernel_thread+0x5c/0x64 Signed-off-by:
-
Weijie Yang authored
commit c4065152 upstream. zram could kunmap_atomic() a NULL pointer in a rare situation: a zram page becomes a full-zeroed page after a partial write io. The current code doesn't handle this case and performs kunmap_atomic() on a NULL pointer, which panics the kernel. This patch fixes this issue. Signed-off-by:
Weijie Yang <weijie.yang@samsung.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Weijie Yang <weijie.yang.kh@gmail.com> Acked-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Emmanuel Grumbach authored
commit 9180ac50 upstream. The LTR is the handshake between the device and the root complex about the latency allowed when the bus exits power save. This configuration was missing and this led to high latency in the link power up. The end user could experience high latency in the network because of this. Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Michael Ellerman authored
commit d319fe2a upstream. We don't expect to get errors from the hypervisor when reading the rng, but if we do we should pass the error up to the hwrng driver. Otherwise the hwrng driver will continue calling us forever. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Andreas Larsson authored
[ Upstream commit 1a17fdc4 ] Atomicity between xchg and cmpxchg cannot be guaranteed when xchg is implemented with a swap and cmpxchg is implemented with locks. Without this, e.g. mcs_spin_lock and mcs_spin_unlock are broken. Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit ab5c7809 ] Otherwise rcu_irq_{enter,exit}() do not happen and we get dumps like: ==================== [ 188.275021] =============================== [ 188.309351] [ INFO: suspicious RCU usage. ] [ 188.343737] 3.18.0-rc3-00068-g20f3963d-dirty #54 Not tainted [ 188.394786] ------------------------------- [ 188.429170] include/linux/rcupdate.h:883 rcu_read_lock() used illegally while idle! [ 188.505235] other info that might help us debug this: [ 188.554230] RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 [ 188.637587] RCU used illegally from extended quiescent state! [ 188.690684] 3 locks held by swapper/7/0: [ 188.721932] #0: (&x->wait#11){......}, at: [<0000000000495de8>] complete+0x8/0x60 [ 188.797994] #1: (&p->pi_lock){-.-.-.}, at: [<000000000048510c>] try_to_wake_up+0xc/0x400 [ 188.881343] #2: (rcu_read_lock){......}, at: [<000000000048a910>] select_task_rq_fair+0x90/0xb40 [ 188.973043]stack backtrace: [ 188.993879] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 3.18.0-rc3-00068-g20f3963d-dirty #54 [ 189.076187] Call Trace: [ 189.089719] [0000000000499360] lockdep_rcu_suspicious+0xe0/0x100 [ 189.147035] [000000000048a99c] select_task_rq_fair+0x11c/0xb40 [ 189.202253] [00000000004852d8] try_to_wake_up+0x1d8/0x400 [ 189.252258] [000000000048554c] default_wake_function+0xc/0x20 [ 189.306435] [0000000000495554] __wake_up_common+0x34/0x80 [ 189.356448] [00000000004955b4] __wake_up_locked+0x14/0x40 [ 189.406456] [0000000000495e08] complete+0x28/0x60 [ 189.448142] [0000000000636e28] blk_end_sync_rq+0x8/0x20 [ 189.496057] [0000000000639898] __blk_mq_end_request+0x18/0x60 [ 189.550249] [00000000006ee014] scsi_end_request+0x94/0x180 [ 189.601286] [00000000006ee334] scsi_io_completion+0x1d4/0x600 [ 189.655463] [00000000006e51c4] scsi_finish_command+0xc4/0xe0 [ 189.708598] [00000000006ed958] scsi_softirq_done+0x118/0x140 [ 189.761735] [00000000006398ec] __blk_mq_complete_request_remote+0xc/0x20 [ 189.827383] [00000000004c75d0] generic_smp_call_function_single_interrupt+0x150/0x1c0 [ 189.906581] [000000000043e514] smp_call_function_single_client+0x14/0x40 ==================== Based almost entirely upon a patch by Paul E. McKenney. Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
-
David S. Miller authored
[ Upstream commit 7da89a2a ] Meelis Roos reports crashes during bootup on a V480 that look like this: ==================== [ 61.300577] PCI: Scanning PBM /pci@9,600000 [ 61.304867] schizo f009b070: PCI host bridge to bus 0003:00 [ 61.310385] pci_bus 0003:00: root bus resource [io 0x7ffe9000000-0x7ffe9ffffff] (bus address [0x0000-0xffffff]) [ 61.320515] pci_bus 0003:00: root bus resource [mem 0x7fb00000000-0x7fbffffffff] (bus address [0x00000000-0xffffffff]) [ 61.331173] pci_bus 0003:00: root bus resource [bus 00] [ 61.385344] Unable to handle kernel NULL pointer dereference [ 61.390970] tsk->{mm,active_mm}->context = 0000000000000000 [ 61.396515] tsk->{mm,active_mm}->pgd = fff000b000002000 [ 61.401716] \|/ ____ \|/ [ 61.401716] "@'/ .. \`@" [ 61.401716] /_| \__/ |_\ [ 61.401716] \__U_/ [ 61.416362] swapper/0(0): Oops [#1] [ 61.419837] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc1-00422-g2cc91884-dirty #24 [ 61.427975] task: fff000b0fd8e9c40 ti: fff000b0fd928000 task.ti: fff000b0fd928000 [ 61.435426] TSTATE: 0000004480e01602 TPC: 00000000004455e4 TNPC: 00000000004455e8 Y: 00000000 Not tainted [ 61.445230] TPC: <schizo_pcierr_intr+0x104/0x560> [ 61.449897] g0: 0000000000000000 g1: 0000000000000000 g2: 0000000000a10f78 g3: 000000000000000a [ 61.458563] g4: fff000b0fd8e9c40 g5: fff000b0fdd82000 g6: fff000b0fd928000 g7: 000000000000000a [ 61.467229] o0: 000000000000003d o1: 0000000000000000 o2: 0000000000000006 o3: fff000b0ffa5fc7e [ 61.475894] o4: 0000000000060000 o5: c000000000000000 sp: fff000b0ffa5f3c1 ret_pc: 00000000004455cc [ 61.484909] RPC: <schizo_pcierr_intr+0xec/0x560> [ 61.489500] l0: fff000b0fd8e9c40 l1: 0000000000a20800 l2: 0000000000000000 l3: 000000000119a430 [ 61.498164] l4: 0000000001742400 l5: 00000000011cfbe0 l6: 00000000011319c0 l7: fff000b0fd8ea348 [ 61.506830] i0: 0000000000000000 i1: fff000b0fdb34000 i2: 0000000320000000 i3: 0000000000000000 [ 61.515497] i4: 00060002010b003f i5: 0000040004e02000 i6: fff000b0ffa5f481 i7: 00000000004a9920 [ 61.524175] I7: <handle_irq_event_percpu+0x40/0x140> [ 61.529099] Call Trace: [ 61.531531] [00000000004a9920] handle_irq_event_percpu+0x40/0x140 [ 61.537681] [00000000004a9a58] handle_irq_event+0x38/0x80 [ 61.543145] [00000000004ac77c] handle_fasteoi_irq+0xbc/0x200 [ 61.548860] [00000000004a9084] generic_handle_irq+0x24/0x40 [ 61.554500] [000000000042be0c] handler_irq+0xac/0x100 ==================== The problem is that pbm->pci_bus->self is NULL. This code is trying to go through the standard PCI config space interfaces to read the PCI controller's PCI_STATUS register. This doesn't work, because we more often than not do not enumerate the PCI controller as a bonafide PCI device during the OF device node scan. Therefore bus->self remains NULL. Existing common code for PSYCHO and PSYCHO-like PCI controllers handles this properly, by doing the config space access directly. Do the same here, pbm->pci_ops->{read,write}(). Reported-by:
-
Dwight Engen authored
[ Upstream commit 85b0c6e6 ] The VD_OP_GET_VTOC operation will succeed only if the vdisk backend has a VTOC label, otherwise it will fail. In particular, it will return error 48 (ENOTSUP) if the disk has an EFI label. VTOC disk labels are already handled by directly reading the disk in block/partitions/sun.c (enabled by CONFIG_SUN_PARTITION which defaults to y on SPARC). Since port->label is unused in the driver, remove the call and the field. Signed-off-by:
Dwight Engen <dwight.engen@oracle.com> Signed-off-by:
-
Dwight Engen authored
[ Upstream commit d0aedcd4 ] vio_dring_avail() will allow use of every dring entry, but when the last entry is allocated then dr->prod == dr->cons which is indistinguishable from the ring empty condition. This causes the next allocation to reuse an entry. When this happens in sunvdc, the server side vds driver begins nack'ing the messages and ends up resetting the ldc channel. This problem does not effect sunvnet since it checks for < 2. The fix here is to just never allocate the very last dring slot so that full and empty are not the same condition. The request start path was changed to check for the ring being full a bit earlier, and to stop the blk_queue if there is no space left. The blk_queue will be restarted once the ring is only half full again. The number of ring entries was increased to 512 which matches the sunvnet and Solaris vdc drivers, and greatly reduces the frequency of hitting the ring full condition and the associated blk_queue stop/starting. The checks in sunvent were adjusted to account for vio_dring_avail() returning 1 less. Orabug: 19441666 OraBZ: 14983 Signed-off-by:
-
Dwight Engen authored
[ Upstream commit 5eed69ff ] ldc_map_sg() could fail its check that the number of pages referred to by the sg scatterlist was <= the number of cookies. This fixes the issue by doing a similar thing to the xen-blkfront driver, ensuring that the scatterlist will only ever contain a segment count <= port->ring_cookies, and each segment will be page aligned, and <= page size. This ensures that the scatterlist is always mappable. Orabug: 19347817 OraBZ: 15945 Signed-off-by:
-
Allen Pais authored
[ Upstream commit de5b73f0 ] The LDom diskserver doesn't return reliable geometry data. In addition, the types for all fields in the vio_disk_geom are u16, which were being truncated in the cast into the u8's of the Linux struct hd_geometry. Modify vdc_getgeo() to compute the geometry from the disk's capacity in a manner consistent with xen-blkfront::blkif_getgeo(). Signed-off-by:
-
Allen Pais authored
[ Upstream commit 9bce2182 ] Interpret the media type from v1.1 protocol to support CDROM/DVD. For v1.0 protocol, a disk's size continues to be calculated from the geometry returned by the vdisk server. The geometry returned by the server can be less than the actual number of sectors available in the backing image/device due to the rounding in the division used to compute the geometry in the vdisk server. In v1.1 protocol a disk's actual size in sectors is returned during the handshake. Use this size when v1.1 protocol is negotiated. Since this size will always be larger than the former geometry computed size, disks created under v1.0 will be forwards compatible to v1.1, but not vice versa. Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 4184b2a7 ] A very minimal and simple user space application allocating an SCTP socket, setting SCTP_AUTH_KEY setsockopt(2) on it and then closing the socket again will leak the memory containing the authentication key from user space: unreferenced object 0xffff8800837047c0 (size 16): comm "a.out", pid 2789, jiffies 4296954322 (age 192.258s) hex dump (first 16 bytes): 01 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff816d7e8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811c88d8>] __kmalloc+0xe8/0x270 [<ffffffffa0870c23>] sctp_auth_create_key+0x23/0x50 [sctp] [<ffffffffa08718b1>] sctp_auth_set_key+0xa1/0x140 [sctp] [<ffffffffa086b383>] sctp_setsockopt+0xd03/0x1180 [sctp] [<ffffffff815bfd94>] sock_common_setsockopt+0x14/0x20 [<ffffffff815beb61>] SyS_setsockopt+0x71/0xd0 [<ffffffff816e58a9>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff This is bad because of two things, we can bring down a machine from user space when auth_enable=1, but also we would leave security sensitive keying material in memory without clearing it after use. The issue is that sctp_auth_create_key() already sets the refcount to 1, but after allocation sctp_auth_set_key() does an additional refcount on it, and thus leaving it around when we free the socket. Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit e40607cb ] An SCTP server doing ASCONF will panic on malformed INIT ping-of-death in the form of: ------------ INIT[PARAM: SET_PRIMARY_IP] ------------> While the INIT chunk parameter verification dissects through many things in order to detect malformed input, it misses to actually check parameters inside of parameters. E.g. RFC5061, section 4.2.4 proposes a 'set primary IP address' parameter in ASCONF, which has as a subparameter an address parameter. So an attacker may send a parameter type other than SCTP_PARAM_IPV4_ADDRESS or SCTP_PARAM_IPV6_ADDRESS, param_type2af() will subsequently return 0 and thus sctp_get_af_specific() returns NULL, too, which we then happily dereference unconditionally through af->from_addr_param(). The trace for the log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 IP: [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp] PGD 0 Oops: 0000 [#1] SMP [...] Pid: 0, comm: swapper Not tainted 2.6.32-504.el6.x86_64 #1 Bochs Bochs RIP: 0010:[<ffffffffa01e9c62>] [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp] [...] Call Trace: <IRQ> [<ffffffffa01f2add>] ? sctp_bind_addr_copy+0x5d/0xe0 [sctp] [<ffffffffa01e1fcb>] sctp_sf_do_5_1B_init+0x21b/0x340 [sctp] [<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp] [<ffffffffa01e5c09>] ? sctp_endpoint_lookup_assoc+0xc9/0xf0 [sctp] [<ffffffffa01e61f6>] sctp_endpoint_bh_rcv+0x116/0x230 [sctp] [<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp] [<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp] [<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter] [<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [...] A minimal way to address this is to check for NULL as we do on all other such occasions where we know sctp_get_af_specific() could possibly return with NULL. Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT") Signed-off-by:
-
Marcelo Leitner authored
[ Upstream commit 19ca9fc1 ] Currently, we only match against local port number in order to reuse socket. But if this new vxlan wants an IPv6 socket and a IPv4 one bound to that port, vxlan will reuse an IPv4 socket as IPv6 and a panic will follow. The following steps reproduce it: # ip link add vxlan6 type vxlan id 42 group 229.10.10.10 \ srcport 5000 6000 dev eth0 # ip link add vxlan7 type vxlan id 43 group ff0e::110 \ srcport 5000 6000 dev eth0 # ip link set vxlan6 up # ip link set vxlan7 up <panic> [ 4.187481] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 ... [ 4.188076] Call Trace: [ 4.188085] [<ffffffff81667c4a>] ? ipv6_sock_mc_join+0x3a/0x630 [ 4.188098] [<ffffffffa05a6ad6>] vxlan_igmp_join+0x66/0xd0 [vxlan] [ 4.188113] [<ffffffff810a3430>] process_one_work+0x220/0x710 [ 4.188125] [<ffffffff810a33c4>] ? process_one_work+0x1b4/0x710 [ 4.188138] [<ffffffff810a3a3b>] worker_thread+0x11b/0x3a0 [ 4.188149] [<ffffffff810a3920>] ? process_one_work+0x710/0x710 So address family must also match in order to reuse a socket. Reported-by:
Jean-Tsung Hsiao <jhsiao@redhat.com> Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit f03eb128 ] Otherwise it gets overwritten by register_netdev(). Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit ebe084aa ] ipip6_tunnel_init() sets the dev->iflink via a call to ipip6_tunnel_bind_dev(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the ndo_init function. Then ipip6_tunnel_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 6c6151da ] ip6_tnl_dev_init() sets the dev->iflink via a call to ip6_tnl_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ip6_tnl_dev_init() as the ndo_init function. Then ip6_tnl_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
Dmitry Torokhov authored
commit 7c4f5607 upstream. The 'max' size passed into the function is measured in number of bits (KEY_MAX, LED_MAX, etc) so we need to convert it accordingly before trying to copy the data out, otherwise we will try copying too much and end up with up with a page fault. Reported-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
- 15 Nov, 2014 2 commits
-
-
Jiri Slaby authored
-
Andy Lutomirski authored
commit 653bc77a upstream. Rusty noticed a Really Bad Bug (tm) in my NT fix. The entry code reads out of bounds, causing the NT fix to be unreliable. But, and this is much, much worse, if your stack is somehow just below the top of the direct map (or a hole), you read out of bounds and crash. Excerpt from the crash: [ 1.129513] RSP: 0018:ffff88001da4bf88 EFLAGS: 00010296 2b:* f7 84 24 90 00 00 00 testl $0x4000,0x90(%rsp) That read is deterministically above the top of the stack. I thought I even single-stepped through this code when I wrote it to check the offset, but I clearly screwed it up. Fixes: 8c7aa698 ("x86_64, entry: Filter RFLAGS.NT on entry from userspace") Reported-by:
Rusty Russell <rusty@ozlabs.org> Cc: stable@vger.kernel.org Signed-off-by:
-
- 14 Nov, 2014 2 commits
-
-
Sinclair Yeh authored
v2: * Use u32 instead of u64 for assumed_bpp. * Fixed mechanism to check for screen objects * Limit the back buffer size to VRAM. v3: * Backported for 3.12-stable Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vineet Gupta authored
Requested-by:
Noam Camus <noamc@ezchip.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
- 13 Nov, 2014 12 commits
-
-
Chris Mason authored
commit 6e5aafb2 upstream. If we hit any errors in btrfs_lookup_csums_range, we'll loop through all the csums we allocate and free them. But the code was using list_entry incorrectly, and ended up trying to free the on-stack list_head instead. This bug came from commit 0678b618 btrfs: Don't BUG_ON kzalloc error in btrfs_lookup_csums_range() Signed-off-by:
Chris Mason <clm@fb.com> Reported-by:
Erik Berg <btrfs@slipsprogrammoer.no> Signed-off-by:
-
Grant Likely authored
commit a87fa1d8 upstream. The string property read helpers will run off the end of the buffer if it is handed a malformed string property. Rework the parsers to make sure that doesn't happen. At the same time add new test cases to make sure the functions behave themselves. The original implementations of of_property_read_string_index() and of_property_count_strings() both open-coded the same block of parsing code, each with it's own subtly different bugs. The fix here merges functions into a single helper and makes the original functions static inline wrappers around the helper. One non-bugfix aspect of this patch is the addition of a new wrapper, of_property_read_string_array(). The new wrapper is needed by the device_properties feature that Rafael is working on and planning to merge for v3.19. The implementation is identical both with and without the new static inline wrapper, so it just got left in to reduce the churn on the header file. Signed-off-by:
Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darren Hart <darren.hart@intel.com> Signed-off-by:
-
Yijing Wang authored
commit e4a60d13 upstream. There is a race condition when removing glue directory. It can be reproduced in following test: path 1: Add first child device device_add() get_device_parent() /*find parent from glue_dirs.list*/ list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry) if (k->parent == parent_kobj) { kobj = kobject_get(k); break; } .... class_dir_create_and_add() path2: Remove last child device under glue dir device_del() cleanup_device_parent() cleanup_glue_dir() kobject_put(glue_dir); If path2 has been called cleanup_glue_dir(), but not call kobject_put(glue_dir), the glue dir is still in parent's kset list. Meanwhile, path1 find the glue dir from the glue_dirs.list. Path2 may release glue dir before path1 call kobject_get(). So kernel will report the warning and bug_on. This is a "classic" problem we have of a kref in a list that can be found while the last instance could be removed at the same time. This patch reuse gdp_mutex to fix this race condition. The following calltrace is captured in kernel 3.4, but the latest kernel still has this bug. ----------------------------------------------------- <4>[ 3965.441471] WARNING: at ...include/linux/kref.h:41 kobject_get+0x33/0x40() <4>[ 3965.441474] Hardware name: Romley <4>[ 3965.441475] Modules linked in: isd_iop(O) isd_xda(O)... ... <4>[ 3965.441605] Call Trace: <4>[ 3965.441611] [<ffffffff8103717a>] warn_slowpath_common+0x7a/0xb0 <4>[ 3965.441615] [<ffffffff810371c5>] warn_slowpath_null+0x15/0x20 <4>[ 3965.441618] [<ffffffff81215963>] kobject_get+0x33/0x40 <4>[ 3965.441624] [<ffffffff812d1e45>] get_device_parent.isra.11+0x135/0x1f0 <4>[ 3965.441627] [<ffffffff812d22d4>] device_add+0xd4/0x6d0 <4>[ 3965.441631] [<ffffffff812d0dbc>] ? dev_set_name+0x3c/0x40 .... <2>[ 3965.441912] kernel BUG at ..../fs/sysfs/group.c:65! <4>[ 3965.441915] invalid opcode: 0000 [#1] SMP ... <4>[ 3965.686743] [<ffffffff811a677e>] sysfs_create_group+0xe/0x10 <4>[ 3965.686748] [<ffffffff810cfb04>] blk_trace_init_sysfs+0x14/0x20 <4>[ 3965.686753] [<ffffffff811fcabb>] blk_register_queue+0x3b/0x120 <4>[ 3965.686756] [<ffffffff812030bc>] add_disk+0x1cc/0x490 .... ------------------------------------------------------- Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
Weng Meiling <wengmeiling.weng@huawei.com> Signed-off-by:
-
Wolfram Sang authored
commit 11cfbfb0 upstream. iowait is for blkio [1]. I2C shouldn't use it. [1] https://lkml.org/lkml/2014/11/3/317Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit ca0c37a0 upstream. Driver allocated on stack struct regulator_config but didn't initialize it fully. Few fields (driver_data, ena_gpio) were left untouched. This lead to using random ena_gpio values as GPIOs for max77693 regulators. On occasion these values could match real GPIO numbers leading to interfering with other drivers and to unsuccessful enable/disable of regulator. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 80b022e2 ("regulator: max77693: Add max77693 regualtor driver.") Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Dan Streetman authored
commit 10ccaf17 upstream. In powerpc pseries platform dlpar operations, use device_online() and device_offline() instead of cpu_up() and cpu_down(). Calling cpu_up/down() directly does not update the cpu device offline field, which is used to online/offline a cpu from sysfs. Calling device_online/offline() instead keeps the sysfs cpu online value correct. The hotplug lock, which is required to be held when calling device_online/offline(), is already held when dlpar_online/offline_cpu() are called, since they are called only from cpu_probe|release_store(). This patch fixes errors on phyp (PowerVM) systems that have cpu(s) added/removed using dlpar operations; without this patch, the /sys/devices/system/cpu/cpuN/online nodes do not correctly show the online state of added/removed cpus. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Fixes: 0902a904 ("Driver core: Use generic offline/online for CPU offline/online") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Hans de Goede authored
commit 183fd8fc upstream. The acpi-video backlight interface on the Acer KAV80 is broken, and worse it causes the entire machine to slow down significantly after a suspend/resume. Blacklist it, and use the acer-wmi backlight interface instead. Note that the KAV80 is somewhat unique in that it is the only Acer model where we fall back to acer-wmi after blacklisting, rather then using the native (e.g. intel) backlight driver. This is done because there is no native backlight interface on this model. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1128309Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Jan Kara authored
commit a8d42056 upstream. When we fail to allocate page vector in rbd_obj_read_sync() we just basically ignore the problem and continue which will result in an oops later. Fix the problem by returning proper error. CC: Yehuda Sadeh <yehuda@inktank.com> CC: Sage Weil <sage@inktank.com> CC: ceph-devel@vger.kernel.org Coverity-id: 1226882 Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 8c3e4347 upstream. 0x4c6e is a secondary device id so should not be used by the driver. Noticed-by:
Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 6fa45593 upstream. Causes problems on some boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=82889Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit bfa6b18c ] Currently, there's no guarantee that udc->driver will be valid when using soft_connect sysfs interface. In fact, we can very easily trigger a NULL pointer dereference by trying to disconnect when a gadget driver isn't loaded. Fix this bug: ~# echo disconnect > soft_connect [ 33.685743] Unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 33.694221] pgd = ed0cc000 [ 33.697174] [00000014] *pgd=ae351831, *pte=00000000, *ppte=00000000 [ 33.703766] Internal error: Oops: 17 [#1] SMP ARM [ 33.708697] Modules linked in: xhci_plat_hcd xhci_hcd snd_soc_davinci_mcasp snd_soc_tlv320aic3x snd_soc_edma snd_soc_omap snd_soc_evm snd_soc_core dwc3 snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd lis3lv02d_i2c matrix_keypad lis3lv02d dwc3_omap input_polldev soundcore [ 33.734372] CPU: 0 PID: 1457 Comm: bash Not tainted 3.17.0-09740-ga93416e-dirty #345 [ 33.742457] task: ee71ce00 ti: ee68a000 task.ti: ee68a000 [ 33.748116] PC is at usb_udc_softconn_store+0xa4/0xec [ 33.753416] LR is at mark_held_locks+0x78/0x90 [ 33.758057] pc : [<c04df128>] lr : [<c00896a4>] psr: 20000013 [ 33.758057] sp : ee68bec8 ip : c0c00008 fp : ee68bee4 [ 33.770050] r10: ee6b394c r9 : ee68bf80 r8 : ee6062c0 [ 33.775508] r7 : 00000000 r6 : ee6062c0 r5 : 0000000b r4 : ee739408 [ 33.782346] r3 : 00000000 r2 : 00000000 r1 : ee71d390 r0 : ee664170 [ 33.789168] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 33.796636] Control: 10c5387d Table: ad0cc059 DAC: 00000015 [ 33.802638] Process bash (pid: 1457, stack limit = 0xee68a248) [ 33.808740] Stack: (0xee68bec8 to 0xee68c000) [ 33.813299] bec0: 0000000b c0411284 ee6062c0 00000000 ee68bef4 ee68bee8 [ 33.821862] bee0: c04112ac c04df090 ee68bf14 ee68bef8 c01c2868 c0411290 0000000b ee6b3940 [ 33.830419] bf00: 00000000 00000000 ee68bf4c ee68bf18 c01c1a24 c01c2818 00000000 00000000 [ 33.838990] bf20: ee61b940 ee2f47c0 0000000b 000ce408 ee68bf80 c000f304 ee68a000 00000000 [ 33.847544] bf40: ee68bf7c ee68bf50 c0152dd8 c01c1960 ee68bf7c c0170af8 ee68bf7c ee2f47c0 [ 33.856099] bf60: ee2f47c0 000ce408 0000000b c000f304 ee68bfa4 ee68bf80 c0153330 c0152d34 [ 33.864653] bf80: 00000000 00000000 0000000b 000ce408 b6e7fb50 00000004 00000000 ee68bfa8 [ 33.873204] bfa0: c000f080 c01532e8 0000000b 000ce408 00000001 000ce408 0000000b 00000000 [ 33.881763] bfc0: 0000000b 000ce408 b6e7fb50 00000004 0000000b 00000000 000c5758 00000000 [ 33.890319] bfe0: 00000000 bec2c924 b6de422d b6e1d226 40000030 00000001 75716d2f 00657565 [ 33.898890] [<c04df128>] (usb_udc_softconn_store) from [<c04112ac>] (dev_attr_store+0x28/0x34) [ 33.907920] [<c04112ac>] (dev_attr_store) from [<c01c2868>] (sysfs_kf_write+0x5c/0x60) [ 33.916200] [<c01c2868>] (sysfs_kf_write) from [<c01c1a24>] (kernfs_fop_write+0xd0/0x194) [ 33.924773] [<c01c1a24>] (kernfs_fop_write) from [<c0152dd8>] (vfs_write+0xb0/0x1bc) [ 33.932874] [<c0152dd8>] (vfs_write) from [<c0153330>] (SyS_write+0x54/0xb0) [ 33.940247] [<c0153330>] (SyS_write) from [<c000f080>] (ret_fast_syscall+0x0/0x48) [ 33.948160] Code: e1a01007 e12fff33 e5140004 e5143008 (e5933014) [ 33.954625] ---[ end trace f849bead94eab7ea ]--- Fixes: 2ccea03a (usb: gadget: introduce UDC Class) Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 52ec49a5 ] During Halt Endpoint Test, our interrupt endpoint will be disabled, which will clear out ep->desc to NULL. Unless we call config_ep_by_speed() again, we will not be able to enable this endpoint which will make us fail that test. Fixes: f9c56cdd (usb: gadget: Clear usb_endpoint_descriptor inside the struct usb_ep on disable) Signed-off-by:
-
