- 15 May, 2018 10 commits
-
-
Aneesh Kumar K.V authored
Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Instead of encoding shift in the table address, use an enumerated index value. This allow us to do different things in the callback for pte and pmd. Signed-off-by:
-
Aneesh Kumar K.V authored
4K config use one full page at level 4 of the pagetable. Add support for single fragment allocation in pagetable fragment code and and use that for 4K config. This makes both 4k and 64k use the same code path. Later we will switch pmd to use the page table fragment code. This is done only for 64bit platforms which is using page table fragment support. Signed-off-by:
-
Aneesh Kumar K.V authored
Now that we have removed 64K page size support, the RCU page table free can be much simpler for nohash. Make a copy of the the rcu callback to pgalloc.h header similar to nohash 32. We could possibly merge 32 and 64 bit there. But that is for a later patch We also move the book3s specific handler to pgtable_book3s64.c. This will be updated in a later patch to handle split pmd ptlock. Signed-off-by:
-
Aneesh Kumar K.V authored
We have in Kconfig config PPC_64K_PAGES bool "64k page size" depends on !PPC_FSL_BOOK3E && (44x || PPC_BOOK3S_64 || PPC_BOOK3E_64) select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64 Only supported BOOK3E 64 bit platforms is FSL_BOOK3E. Remove the dead 64k page support code from 64bit nohash. Signed-off-by:
-
Aneesh Kumar K.V authored
We rename the alloc and get_from_cache to indicate they operate on pte fragments. In later patch we will add pmd fragment support. No functional change in this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
In later patch we switch pmd_lock from mm->page_table_lock to split pmd ptlock. It avoid compilations issues, use pmd_lockptr helper. Signed-off-by:
-
Aneesh Kumar K.V authored
Only code movement and avoid #ifdef. Signed-off-by:
-
Michael Ellerman authored
This brings in one commit that we may want to share with the kvm-ppc tree, to avoid merge conflicts and get wider testing.
-
Aneesh Kumar K.V authored
In the next set of patches, we will switch pmd allocator to use page fragments and the locking will be updated to split pmd ptlock. We want to avoid using fragments for partition-scoped table. Use slab cache similar to level 4 table Signed-off-by:
-
- 14 May, 2018 5 commits
-
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. See commit 1c8f4220 ("mm: change return type to vm_fault_t"). We are fixing a minor bug, that the error from vm_insert_pfn() was being ignored and the effect of this is likely to be only felt in OOM situations. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in debug messages of a structure field name Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nicholas Piggin authored
The exec_target binary could segfault calling _exit(2) because r13 is not set up properly (and libc looks at that when performing a syscall). Call SYS_exit using syscall(2) which doesn't seem to have this problem. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Alexey Kardashevskiy authored
At the moment we assume that IODA2 and newer PHBs can always do 4K/64K/16M IOMMU pages, however this is not the case for POWER9 and now skiboot advertises the supported sizes via the device so we use that instead of hard coding the mask. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Michael Ellerman authored
Currently memtrace doesn't build if NUMA=n: In function ‘memtrace_alloc_node’: arch/powerpc/platforms/powernv/memtrace.c:134:6: error: the address of ‘contig_page_data’ will always evaluate as ‘true’ if (!NODE_DATA(nid) || !node_spanned_pages(nid)) ^ This is because for NUMA=n NODE_DATA(nid) points to an always allocated structure, contig_page_data. But even in the NUMA=y case memtrace_alloc_node() is only called for online nodes, and we should always have a NODE_DATA() allocated for an online node. So remove the (hopefully) overly paranoid check, which also means we can build when NUMA=n. Signed-off-by:
-
- 11 May, 2018 5 commits
-
-
Michael Ellerman authored
In commit e6a6928c ("of/fdt: Convert FDT functions to use libfdt") (Apr 2014), the generic flat device tree code dropped support for flat device tree's older than version 0x10 (16). We still have code in our CPU scanning to cope with flat device tree versions earlier than 2, which can now never trigger, so drop it. Signed-off-by:
-
Michael Ellerman authored
Add a test of the relative branch patching logic in the alternate section feature fixup code. This tests that if we branch past the last instruction of the alternate section, the branch is not patched. That's because the assembler will have created a branch that already points to the first instruction after the patched section, which is correct and needs no further patching. Signed-off-by: -
Michael Ellerman authored
We want this to remain the last test (because it's disabled by default), so give it a non-numbered name so we don't have to renumber it when adding new tests before it. Signed-off-by: -
Michael Ellerman authored
The code patching code has always been a bit confused about whether it's best to use void *, unsigned int *, char *, etc. to point to instructions. In fact in the feature fixups tests we use both unsigned int[] and u8[] in different places. Unfortunately the tests that use unsigned int[] calculate the size of the code blocks using subtraction of those unsigned int pointers, and then pass the result to memcmp(). This means we're only comparing 1/4 of the bytes we need to, because we need to multiply by sizeof(unsigned int) to get the number of *bytes*. The result is that the tests do all the patching and then only compare some of the resulting code, so patching bugs that only effect that last 3/4 of the code could slip through undetected. It turns out that hasn't been happening, although one test had a bad expected case (see previous commit). Fix it for now by multiplying the size by 4 in the affected functions. Fixes: 362e7701 ("powerpc: Add self-tests of the feature fixup code") Epic-brown-paper-bag-by:
-
Michael Ellerman authored
The expected case for this test was wrong, the source of the alternate code sequence is: FTR_SECTION_ELSE 2: or 2,2,2 PPC_LCMPI r3,1 beq 3f blt 2b b 3f b 1b ALT_FTR_SECTION_END(0, 1) 3: or 1,1,1 or 2,2,2 4: or 3,3,3 So when it's patched the '3' label should still be on the 'or 1,1,1', and the 4 label is irrelevant and can be removed. Fixes: 362e7701 ("powerpc: Add self-tests of the feature fixup code") Signed-off-by:
-
- 10 May, 2018 20 commits
-
-
Michael Ellerman authored
If the systbl_chk.sh checks fail we print a message, but with no indication that it's an error. That makes it hard to find in build logs with eg. grep. So prefix any output with "Error:". Signed-off-by: -
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
it had always been pointless - compat_sys_select() sign-extends the first argument just fine on its own. Signed-off-by:
-
Michael Ellerman authored
Currently the select system call is wired up with the SYSX_SPU() macro. The SYSX_SPU() is not handled by systbl_chk.c, which means the syscall number for select is not checked. That hides the fact that the syscall number for select is actually __NR__newselect not __NR_select. In a following patch we'd like to drop ppc32_select() which means select will become a regular COMPAT_SYS_SPU() syscall. But COMPAT_SYS_SPU() can't deal with the fact that the syscall number is actually __NR__newselect. We also can't just redefine __NR_select because that's still used for the old select call. So add a new COMPAT_NEW_SPU() that does the same thing as COMPAT_SYS_SPU() except it encodes that we're using the new number. Signed-off-by: -
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Torsten Duwe authored
The "Power Architecture 64-Bit ELF V2 ABI" says in section 2.3.2.3: [...] There are several rules that must be adhered to in order to ensure reliable and consistent call chain backtracing: * Before a function calls any other function, it shall establish its own stack frame, whose size shall be a multiple of 16 bytes. – In instances where a function’s prologue creates a stack frame, the back-chain word of the stack frame shall be updated atomically with the value of the stack pointer (r1) when a back chain is implemented. (This must be supported as default by all ELF V2 ABI-compliant environments.) [...] – The function shall save the link register that contains its return address in the LR save doubleword of its caller’s stack frame before calling another function. To me this sounds like the equivalent of HAVE_RELIABLE_STACKTRACE. This patch may be unneccessarily limited to ppc64le, but OTOH the only user of this flag so far is livepatching, which is only implemented on PPCs with 64-LE, a.k.a. ELF ABI v2. Feel free to add other ppc variants, but so far only ppc64le got tested. This change also implements save_stack_trace_tsk_reliable() for ppc64le that checks for the above conditions, where possible. Signed-off-by:
Torsten Duwe <duwe@suse.de> Signed-off-by:
Nicolai Stange <nstange@suse.de> Acked-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Nicholas Piggin authored
Provide timebase and timebase of last heartbeat in watchdog lockup messages. Also provide a stack trace of when a CPU becomes un-stuck, which can be useful -- it could be where irqs are re-enabled, so it may be the end of the critical section which is responsible for the latency which is useful information. Signed-off-by:
-
Nicholas Piggin authored
The watchdog heartbeat timestamp is updated when the local heartbeat timer fires (or touch_nmi_watchdog() is called). This is an interesting data point, so don't overwrite it when the soft-NMI interrupt detects a hard lockup. That code came from a pre- merge version to prevent hard lockup messages flood, but that's taken care of with the stuck CPU logic now, so there is no reason to update the heartbeat timestamp here. Signed-off-by:
-
Cédric Le Goater authored
This is not the case for the moment, but future releases of pHyp might need to introduce some synchronisation routines under the hood which would make the XIVE hcalls longer to complete. As this was done for H_INT_RESET, let's wrap the other hcalls in a loop catching the H_LONG_BUSY_* codes. Signed-off-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Cédric Le Goater authored
The hcall H_INT_RESET should be called to make sure XIVE is fully reseted. Signed-off-by:
-
Cédric Le Goater authored
The hcall H_INT_RESET can take some time to complete and in such cases it returns H_LONG_BUSY_* codes requiring the machine to sleep for a while before retrying. Signed-off-by:
-
Cédric Le Goater authored
The kexec_state KEXEC_STATE_IRQS_OFF barrier is reached by all secondary CPUs before the kexec_cpu_down() operation is called on secondaries. This can raise conflicts and provoque errors in the XIVE hcalls when XIVE is shutdown with H_INT_RESET on the primary CPU. To synchronize the kexec_cpu_down() operations and make sure the secondaries have completed their task before the primary starts doing the same, let's move the primary kexec_cpu_down() after the KEXEC_STATE_REAL_MODE barrier. This change of the ending sequence of kexec is mostly useful on the pseries platform but it impacts also the powernv, ps3 and 85xx platforms. powernv can be easily tested and fixed but some caution is required for the other two. Signed-off-by:
-
Nicholas Piggin authored
For consideration: * Add NVDIMM support - Enables greater testing, mambo device. * Add IPv6 support built in + additional modules - Because it's 2018 maan. * Add DEFERRED_STRUCT_PAGE_INIT - Let's see what breaks. * Add PPC_MEMTRACE - Small powernv debugfs driver for getting hardware traces. * Add MEMORY_FAILURE - Machine check exceptions can now drive memory failure. * Turn on FANOTIFY - This is the current filesystem notification feature. * Turn on SCOM_DEBUGFS - Handy for hardware/firmware debugging, security risk? * Turn on async SCSI scanning - Let's see what breaks. * Add MLX5 driver as a module - Popular demand. * Add CRYPTO_CRCT10DIF_VPMSUM - POWER8 T10DIF acceleration. * Make a bunch of USB hid drivers modules. * Make SCSI SG, SR, and FC modules - FC is huge. * Make video drivers except AST GPU modules - Also huge. * Make PCI serial driver a module - Uncommon. * Make more things modules, NFS FS, RAM disk, netconsole, MS-DOS fs. * Get rid of /dev/port - Not used. * Remove PPS and PTP subsystms - Unusual. * Remove legacy BSD ttys - Long dead. * Remove IDE - Deprecated and replaced with ATA. * Remove WIRELESS - Until we get POWER9 laptops. * Remove RAW - Long deprecated in favour of direct IO. * Remove floppy, parport, and PS2 input devices - not supported. * Remove virtio drivers, ballooning - We're host only. * Remove PPP - Sorry Paulus. This results in a significantly smaller vmlinux: text data bss dec filename 13143383 5277944 1317856 19739183 vanilla 12263281 4852074 1341720 18457075 patched Signed-off-by: -
Jonathan Neuschäfer authored
The B43 driver only needs CONFIG_SSB to support the WLAN card found in the Wii. Configure it accordingly, and disable BCMA bus support to save a bit of space. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
-
Jonathan Neuschäfer authored
This allows access to the SD card and the BCM4318 Wifi module. Signed-off-by:
-
Jonathan Neuschäfer authored
Now that there's a GPIO driver for the Wii, let's enable the following drivers: - the GPIO driver itself - gpio-keys - gpio-poweroff - gpio-leds and a few LED triggers Signed-off-by:
-
Jonathan Neuschäfer authored
The Wii doesn't have built-in Ethernet and USB Ethernet adapters are in a different menu. Disable CONFIG_ETHERNET to save some space in support code for Ethernet drivers. Note that this patch doesn't disable any Ethernet drivers, because they are not enabled by default. Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
