- 24 Oct, 2013 39 commits
-
-
Peter Oberparleiter authored
Missing parenthesis may cause problems when using the defines together with operations of higher precedence. Signed-off-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Michael Holzheu authored
Currently zfpcdump can only collect registers for up to CONFIG_NR_CPUS CPUss. This dependency is not necessary. So remove it by dynamically allocating the save area array. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Steven Rostedt noted that s390 is the only architecture which calls ftrace_push_return_trace() before ftrace_graph_entry() and therefore has the small advantage that trace.depth gets initialized automatically. However this small advantage isn't worth the difference and possible subtle breakage that may result from this. So change s390 to have the same function call order like all other architectures: first ftrace_graph_entry(), then ftrace_push_return_trace() Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Heiko Carstens authored
Get rid of this compile warning: arch/s390/kernel/crash_dump.c: In function 'copy_from_realmem': arch/s390/kernel/crash_dump.c:48:6: warning: unused variable 'rc' [-Wunused-variable] int rc; ^ Signed-off-by: -
Chen Gang authored
The type of 'v->counter' is always 'int', and related inline assembly code also process 'int', so use 'unsigned int' instead of 'unsigned long' for the 'mask'. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Heiko Carstens authored
If [__]get_user_pages_fast() gets called with nr_pages == 0, the current code would walk the page tables and pin as many pages until the first invalid pte (or the kernel crashed while writing struct page pointers to the pages array). So let's handle at least the nr_pages == 0 case correctly and exit early. Signed-off-by:
-
Heiko Carstens authored
Just call __get_user_pages_fast() from get_user_pages_fast() like powerpc. This saves a lot of duplicated code. Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
With dirty and referenced bits implemented in software it is unnecessary to initialize the storage key for every page. With this patch not a single storage key operation is done for a system that does not use KVM. For KVM set_pte_at/pgste_set_key will do the initialization for the guest view of the storage key when the mapping for the page is established in the host. Signed-off-by: -
Martin Schwidefsky authored
The prolog of functions generated by the bpf jit compiler uses an instruction sequence with an "ahi" instruction to create stack space instead of using an "aghi" instruction. Using the 32-bit "ahi" is not wrong as the stack we are operating on is an order-4 allocation which is always aligned to 16KB. But it is more consistent to use an "aghi" as the stack pointer is a 64-bit value. Signed-off-by: -
Heiko Carstens authored
- turn some macros into functions - merge two almost identical versions for 32/64 bit - add BUILD_BUG_ON() check to make sure the passed in array is large enough Signed-off-by:
-
Sebastian Ott authored
When quiescing an eadm subchannel make sure that outstanding IO is cleared and potential timeout handlers are canceled. Reviewed-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Implement architecture-specific functionality when a PCI device is doing a hibernate transition. Signed-off-by:
-
Martin Schwidefsky authored
Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: -
Heiko Carstens authored
find_first_bit_left() and friends have nothing to do with the normal LSB0 bit numbering for big endian machines used in Linux (least significant bit has bit number 0). Instead they use MSB0 bit numbering, where the most signficant bit has bit number 0. So rename find_first_bit_left() and friends to find_first_bit_inv(), to avoid any confusion. Also provide inv versions of set_bit, clear_bit and test_bit. This also removes the confusing use of e.g. set_bit() in airq.c which uses a "be_to_le" bit number conversion, which could imply that instead set_bit_le() could be used. But that is entirely wrong since the _le bitops variant uses yet another bit numbering scheme. Signed-off-by:
-
Heiko Carstens authored
Since z9 109 we have the flogr instruction which can be used to implement optimized versions of __ffs, ffs, __fls, fls and fls64. So implement and use them, instead of the generic variants. This reduces the size of the kernel image (defconfig, -march=z9-109) by 19,648 bytes. Signed-off-by:
-
Heiko Carstens authored
Just like all other architectures we should use out-of-line find bit operations, since the inline variant bloat the size of the kernel image. And also like all other architecures we should only supply optimized variants of the __ffs, ffs, etc. primitives. Therefore this patch removes the inlined s390 find bit functions and uses the generic out-of-line variants instead. The optimization of the primitives follows with the next patch. With this patch also the functions find_first_bit_left() and find_next_bit_left() have been reimplemented, since logically, they are nothing else but a find_first_bit()/find_next_bit() implementation that use an inverted __fls() instead of __ffs(). Also the restriction that these functions only work on machines which support the "flogr" instruction is gone now. This reduces the size of the kernel image (defconfig, -march=z9-109) by 144,482 bytes. Alone the size of the function build_sched_domains() gets reduced from 7 KB to 3,5 KB. We also git rid of unused functions like find_first_bit_le()... Signed-off-by:
-
Hendrik Brueckner authored
Refactor direct debug level comparisons with the (internal) s390db->level member. Use the debug_level_enabled() function instead. Signed-off-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by:
-
Hendrik Brueckner authored
Add the debug_level_enabled() function to check if debug events for a particular level would be logged. This might help to save cycles for debug events that require additional information collection. Signed-off-by:
-
Heiko Carstens authored
Since zEC12 we have the interlocked-access facility 2 which allows to use the instructions ni/oi/xi to update a single byte in storage with compare-and-swap semantics. So change set_bit(), clear_bit() and change_bit() to generate such code instead of a compare-and-swap loop (or using the load-and-* instruction family), if possible. This reduces the text segment by yet another 8KB (defconfig). Alternatively the long displacement variants niy/oiy/xiy could have been used, but the extended displacement field is usually not needed and therefore would only increase the size of the text segment again. Signed-off-by:
-
Heiko Carstens authored
Remove CONFIG_SMP from bitops code. This reduces the C code significantly but also generates better code for the SMP case. This means that for !CONFIG_SMP set_bit() and friends now also have compare and swap semantics (read: more code). However nobody really cares for !CONFIG_SMP and this is the trade-off to simplify the SMP code which we do care about. The non-atomic bitops like __set_bit() now generate also better code because the old code did not have a __builtin_contant_p() check for the CONFIG_SMP case and therefore always generated the inline assembly variant. However the inline assemblies for the non-atomic case now got completely removed since gcc can produce better code, which accesses less memory operands. test_bit() got also a bit simplified since it did have a __builtin_constant_p() check, however two identical code pathes for each case (written differently). In result this mainly reduces the to be maintained code but is not very relevant for code generation, since there are not many non-atomic bitops usages that we care about. (code reduction defconfig kernel image before/after: 560 bytes). Signed-off-by:
-
Heiko Carstens authored
- add a typecheck to the defines to make sure they operate on an atomic_t - simplify inline assembly constraints - keep variable names common between functions Signed-off-by:
-
Heiko Carstens authored
If the interlocked-access facility 1 is available we can use the asi and agsi instructions for interlocked updates if the to be added value is a contanst and small (in the range of -128..127). asi and agsi do not not return the old or new value, therefore these instructions can only be used for atomic_(add|sub|inc|dec)[64]. Signed-off-by:
-
Heiko Carstens authored
get_inbound_buffer_frontier() makes use of the return value of atomic_sub() which shouldn't work, since atomic_sub() is supposed to return void. This only works on s390 because atomic_sub() gets mapped to atomic_sub_return() with a define without changing it's return value to void. So use atomic_sub_return() instead of atomic_sub() in qeth code before fixing atomic ops. Signed-off-by:
-
Heiko Carstens authored
Since we have an in-kernel disassembler we can make sure that there won't be any kprobes set on random data. Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Heiko Carstens authored
Now that the in-kernel disassembler has an own header file move the disassembler related function prototypes to that header file. Signed-off-by:
-
Suzuki K. Poulose authored
The patch moves some of the definitions to a header file. No functional changes involved. I have retained the Copyright Statement from the original file. Signed-off-by:
Suzuki K Poulose <suzuki@in.ibm.com> [Heiko Carstens: rename s390-dis.h to dis.h] Signed-off-by:
-
Suzuki K. Poulose authored
Rename 'insn' and 'operand' structures to more canonical names to avoid conflicts. struct insn represents information about an instruction, including the mnemonics, format and opcode. struct operand represents the 'properties' and information on howto interpret the operand value and doesn't contain the value. We rename these structures for avoiding a global conflict. i.e, 1,$s/struct insn/struct s390_insn/g 1,$s/struct operand/struct s390_operand/g Signed-off-by:
-
Heiko Carstens authored
Same as for bitops: make use of the interlocked-access facility 1 instructions which allow to atomically update storage locations without a compare-and-swap loop. Signed-off-by:
-
Heiko Carstens authored
Get rid of the own atomic_sub_return() implementation. Otherwise we can't make use of the interlocked-access facility 1 instructions for atomic_sub_return(), since there is no "load and subtract" instruction available. Signed-off-by:
-
Heiko Carstens authored
When checking the insn address wether it is a kernel image or module address it should be an if-else-if statement not two independent if statements. This doesn't really fix a bug, but matches s390_free_insn_slot(). Signed-off-by:
-
Heiko Carstens authored
Currently we only set the -march compiler option if the kbuild system figured out that the compiler actually supports the selected architecture (cc-option test). In result this means that no -march compiler option is set when an unsupported cpu architecture of the current compiler is selected. The kernel compile will afterwards succeed but with the default architecture instead of the (unsupported) selected one. Change this behaviour, so compiles will fail if the compiler does not support the selected cpu architecture. Signed-off-by:
-
Heiko Carstens authored
Make use of the interlocked-access facility 1 that got added with the z196 architecure. This facilility added new instructions which can atomically update a storage location without a compare-and-swap loop. E.g. setting a bit within a "long" can be done with a single instruction. The size of the kernel image gets ~30kb smaller. Considering that there are appr. 1900 bitops call sites this means that each one saves about 15-16 bytes per call site which is expected. Signed-off-by:
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md bugfixes from Neil Brown: "Assorted md bug-fixes for 3.12. All tagged for -stable releases too" * tag 'md/3.12-fixes' of git://neil.brown.name/md: raid5: avoid finding "discard" stripe raid5: set bio bi_vcnt 0 for discard request md: avoid deadlock when md_set_badblocks. md: Fix skipping recovery for read-only arrays.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of two fixes which cause oopses (Buslogic, qla2xxx) and one fix which may cause a hang because of request miscounting (sd)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] sd: call blk_pm_runtime_init before add_disk [SCSI] qla2xxx: Fix request queue null dereference. [SCSI] BusLogic: Fix an oops when intializing multimaster adapter
-
Shaohua Li authored
SCSI discard will damage discard stripe bio setting, eg, some fields are changed. If the stripe is reused very soon, we have wrong bios setting. We remove discard stripe from hash list, so next time the strip will be fully initialized. Suitable for backport to 3.7+. Cc: <stable@vger.kernel.org> (3.7+) Signed-off-by:
Shaohua Li <shli@fusionio.com> Signed-off-by:
NeilBrown <neilb@suse.de>
-
Shaohua Li authored
SCSI layer will add new payload for discard request. If two bios are merged to one, the second bio has bi_vcnt 1 which is set in raid5. This will confuse SCSI and cause oops. Suitable for backport to 3.7+ Cc: stable@vger.kernel.org (v3.7+) Reported-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bian Yu authored
When operate harddisk and hit errors, md_set_badblocks is called after scsi_restart_operations which already disabled the irq. but md_set_badblocks will call write_sequnlock_irq and enable irq. so softirq can preempt the current thread and that may cause a deadlock. I think this situation should use write_sequnlock_irqsave/irqrestore instead. I met the situation and the call trace is below: [ 638.919974] BUG: spinlock recursion on CPU#0, scsi_eh_13/1010 [ 638.921923] lock: 0xffff8800d4d51fc8, .magic: dead4ead, .owner: scsi_eh_13/1010, .owner_cpu: 0 [ 638.923890] CPU: 0 PID: 1010 Comm: scsi_eh_13 Not tainted 3.12.0-rc5+ #37 [ 638.925844] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS 4.6.5 03/05/2013 [ 638.927816] ffff880037ad4640 ffff880118c03d50 ffffffff8172ff85 0000000000000007 [ 638.929829] ffff8800d4d51fc8 ffff880118c03d70 ffffffff81730030 ffff8800d4d51fc8 [ 638.931848] ffffffff81a72eb0 ffff880118c03d90 ffffffff81730056 ffff8800d4d51fc8 [ 638.933884] Call Trace: [ 638.935867] <IRQ> [<ffffffff8172ff85>] dump_stack+0x55/0x76 [ 638.937878] [<ffffffff81730030>] spin_dump+0x8a/0x8f [ 638.939861] [<ffffffff81730056>] spin_bug+0x21/0x26 [ 638.941836] [<ffffffff81336de4>] do_raw_spin_lock+0xa4/0xc0 [ 638.943801] [<ffffffff8173f036>] _raw_spin_lock+0x66/0x80 [ 638.945747] [<ffffffff814a73ed>] ? scsi_device_unbusy+0x9d/0xd0 [ 638.947672] [<ffffffff8173fb1b>] ? _raw_spin_unlock+0x2b/0x50 [ 638.949595] [<ffffffff814a73ed>] scsi_device_unbusy+0x9d/0xd0 [ 638.951504] [<ffffffff8149ec47>] scsi_finish_command+0x37/0xe0 [ 638.953388] [<ffffffff814a75e8>] scsi_softirq_done+0xa8/0x140 [ 638.955248] [<ffffffff8130e32b>] blk_done_softirq+0x7b/0x90 [ 638.957116] [<ffffffff8104fddd>] __do_softirq+0xfd/0x330 [ 638.958987] [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.960861] [<ffffffff8174a5cc>] call_softirq+0x1c/0x30 [ 638.962724] [<ffffffff81004c7d>] do_softirq+0x8d/0xc0 [ 638.964565] [<ffffffff8105024e>] irq_exit+0x10e/0x150 [ 638.966390] [<ffffffff8174ad4a>] smp_apic_timer_interrupt+0x4a/0x60 [ 638.968223] [<ffffffff817499af>] apic_timer_interrupt+0x6f/0x80 [ 638.970079] <EOI> [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.971899] [<ffffffff8173fa6a>] ? _raw_spin_unlock_irq+0x3a/0x50 [ 638.973691] [<ffffffff8173fa60>] ? _raw_spin_unlock_irq+0x30/0x50 [ 638.975475] [<ffffffff81562393>] md_set_badblocks+0x1f3/0x4a0 [ 638.977243] [<ffffffff81566e07>] rdev_set_badblocks+0x27/0x80 [ 638.978988] [<ffffffffa00d97bb>] raid5_end_read_request+0x36b/0x4e0 [raid456] [ 638.980723] [<ffffffff811b5a1d>] bio_endio+0x1d/0x40 [ 638.982463] [<ffffffff81304ff3>] req_bio_endio.isra.65+0x83/0xa0 [ 638.984214] [<ffffffff81306b9f>] blk_update_request+0x7f/0x350 [ 638.985967] [<ffffffff81306ea1>] blk_update_bidi_request+0x31/0x90 [ 638.987710] [<ffffffff813085e0>] __blk_end_bidi_request+0x20/0x50 [ 638.989439] [<ffffffff8130862f>] __blk_end_request_all+0x1f/0x30 [ 638.991149] [<ffffffff81308746>] blk_peek_request+0x106/0x250 [ 638.992861] [<ffffffff814a62a9>] ? scsi_kill_request.isra.32+0xe9/0x130 [ 638.994561] [<ffffffff814a633a>] scsi_request_fn+0x4a/0x3d0 [ 638.996251] [<ffffffff813040a7>] __blk_run_queue+0x37/0x50 [ 638.997900] [<ffffffff813045af>] blk_run_queue+0x2f/0x50 [ 638.999553] [<ffffffff814a5750>] scsi_run_queue+0xe0/0x1c0 [ 639.001185] [<ffffffff814a7721>] scsi_run_host_queues+0x21/0x40 [ 639.002798] [<ffffffff814a2e87>] scsi_restart_operations+0x177/0x200 [ 639.004391] [<ffffffff814a4fe9>] scsi_error_handler+0xc9/0xe0 [ 639.005996] [<ffffffff814a4f20>] ? scsi_unjam_host+0xd0/0xd0 [ 639.007600] [<ffffffff81072f6b>] kthread+0xdb/0xe0 [ 639.009205] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 [ 639.010821] [<ffffffff81748cac>] ret_from_fork+0x7c/0xb0 [ 639.012437] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 This bug was introduce in commit 2e8ac303 (the first time rdev_set_badblock was call from interrupt context), so this patch is appropriate for 3.5 and subsequent kernels. Cc: <stable@vger.kernel.org> (3.5+) Signed-off-by:
Bian Yu <bianyu@kedacom.com> Reviewed-by:
Jianpeng Ma <majianpeng@gmail.com> Signed-off-by:
-
Lukasz Dorau authored
Since: commit 7ceb17e8 md: Allow devices to be re-added to a read-only array. spares are activated on a read-only array. In case of raid1 and raid10 personalities it causes that not-in-sync devices are marked in-sync without checking if recovery has been finished. If a read-only array is degraded and one of its devices is not in-sync (because the array has been only partially recovered) recovery will be skipped. This patch adds checking if recovery has been finished before marking a device in-sync for raid1 and raid10 personalities. In case of raid5 personality such condition is already present (at raid5.c:6029). Bug was introduced in 3.10 and causes data corruption. Cc: stable@vger.kernel.org Signed-off-by:Pawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by:
Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by:
-
- 23 Oct, 2013 1 commit
-
-
Aaron Lu authored
Sujit has found a race condition that would make q->nr_pending unbalanced, it occurs as Sujit explained: " sd_probe_async() -> add_disk() -> disk_add_event() -> schedule(disk_events_workfn) sd_revalidate_disk() blk_pm_runtime_init() return; Let's say the disk_events_workfn() calls sd_check_events() which tries to send test_unit_ready() and because of sd_revalidate_disk() trying to send another commands the test_unit_ready() might be re-queued as the tagged command queuing is disabled. So the race condition is - Thread 1 | Thread 2 sd_revalidate_disk() | sd_check_events() ...nr_pending = 0 as q->dev = NULL| scsi_queue_insert() blk_runtime_pm_init() | blk_pm_requeue_request() -> | nr_pending = -1 since | q->dev != NULL " The problem is, the test_unit_ready request doesn't get counted the first time it is queued, so the later decrement of q->nr_pending in blk_pm_requeue_request makes it unbalanced. Fix this by calling blk_pm_runtime_init before add_disk so that all requests initiated there will all be counted. Signed-off-by:
Aaron Lu <aaron.lu@intel.com> Reported-and-tested-by:
Sujit Reddy Thumma <sthumma@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
