Pull SCSI fixes from James Bottomley:
 "The core change is to detect unusually large number of VPD pages
  (caused by device manufacturers having an endiannes issue) and reject
  them rather than trying to parse a huge non-existent array.

  The remaining fixes are in drivers the most user visible of which is
  the ALUA state transition recognition (leads to intermittent I/O
  errors in some situations otherwise)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort()
  scsi: core: Handle devices which return an unusually large VPD page count
  scsi: mpt3sas: Add missing kerneldoc parameter descriptions
  scsi: qedf: Set qed_slowpath_params to zero before use
  scsi: qedf: Wait for stag work during unload
  scsi: qedf: Don't process stag work during unload and recovery
  scsi: sr: Fix unintentional arithmetic wraparound
  scsi: core: alua: I/O errors for ALUA state transitions
  scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()

Pull pci fix from Bjorn Helgaas:

 - Revert lockdep checking on locking that protects device resets from
   user-space config accesses; it exposed issues for which fixes are in
   the works but are too risky for this cycle (Dan Williams)

* tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: Revert the cfg_access_lock lockdep mechanism

Pull networking fixes from Jakub Kicinski:
 "Including fixes from BPF and big collection of fixes for WiFi core and
  drivers.

  Current release - regressions:

   - vxlan: fix regression when dropping packets due to invalid src
     addresses

   - bpf: fix a potential use-after-free in bpf_link_free()

   - xdp: revert support for redirect to any xsk socket bound to the
     same UMEM as it can result in a corruption

   - virtio_net:
      - add missing lock protection when reading return code from
        control_buf
      - fix false-positive lockdep splat in DIM
      - Revert "wifi: wilc1000: convert list management to RCU"

   - wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config

  Previous releases - regressions:

   - rtnetlink: make the "split" NLM_DONE handling generic, restore the
     old behavior for two cases where we started coalescing those
     messages with normal messages, breaking sloppily-coded userspace

   - wifi:
      - cfg80211: validate HE operation element parsing
      - cfg80211: fix 6 GHz scan request building
      - mt76: mt7615: add missing chanctx ops
      - ath11k: move power type check to ASSOC stage, fix connecting to
        6 GHz AP
      - ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
      - rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
      - iwlwifi: mvm: fix a crash on 7265

  Previous releases - always broken:

   - ncsi: prevent multi-threaded channel probing, a spec violation

   - vmxnet3: disable rx data ring on dma allocation failure

   - ethtool: init tsinfo stats if requested, prevent unintentionally
     reporting all-zero stats on devices which don't implement any

   - dst_cache: fix possible races in less common IPv6 features

   - tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED

   - ax25: fix two refcounting bugs

   - eth: ionic: fix kernel panic in XDP_TX action

  Misc:

   - tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"

* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
  selftests: net: lib: set 'i' as local
  selftests: net: lib: avoid error removing empty netns name
  selftests: net: lib: support errexit with busywait
  net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
  ipv6: fix possible race in __fib6_drop_pcpu_from()
  af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
  af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
  af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
  af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
  af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
  af_unix: Annotate data-races around sk->sk_sndbuf.
  af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
  af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
  af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
  af_unix: Annotate data-race of sk->sk_state in unix_accept().
  af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
  af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
  af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
  af_unix: Annodate data-races around sk->sk_state for writers.
  af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
  ...

Pull tomoyo fixlet from Tetsuo Handa:
 "Single patch to update project links, no behavior changes"

* tag 'tomoyo-pr-20240606' of git://git.code.sf.net/p/tomoyo/tomoyo:
  tomoyo: update project links

Pull EFI fixes from Ard Biesheuvel:

 - Ensure that .discard sections are really discarded in the EFI zboot
   image build

 - Return proper error numbers from efi-pstore

 - Add __nocfi annotations to EFI runtime wrappers

* tag 'efi-fixes-for-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: Add missing __nocfi annotations to runtime wrappers
  efi: pstore: Return proper errors on UEFI failures
  efi/libstub: zboot.lds: Discard .discard sections

Matthieu Baerts says:

====================
selftests: net: lib: small fixes

While looking at using 'lib.sh' for the MPTCP selftests [1], we found
some small issues with 'lib.sh'. Here they are:

- Patch 1: fix 'errexit' (set -e) support with busywait. 'errexit' is
  supported in some functions, not all. A fix for v6.8+.

- Patch 2: avoid confusing error messages linked to the cleaning part
  when the netns setup fails. A fix for v6.8+.

- Patch 3: set a variable as local to avoid accidentally changing the
  value of a another one with the same name on the caller side. A fix
  for v6.10-rc1+.

Link: https://lore.kernel.org/mptcp/5f4615c3-0621-43c5-ad25-55747a4350ce@kernel.org/T/ [1]
====================

Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-0-b3afadd368c9@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Without this, the 'i' variable declared before could be overridden by
accident, e.g.

  for i in "${@}"; do
      __ksft_status_merge "${i}"  ## 'i' has been modified
      foo "${i}"                  ## using 'i' with an unexpected value
  done

After a quick look, it looks like 'i' is currently not used after having
been modified in __ksft_status_merge(), but still, better be safe than
sorry. I saw this while modifying the same file, not because I suspected
an issue somewhere.

Fixes: 596c8819 ("selftests: forwarding: Have RET track kselftest framework constants")
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-3-b3afadd368c9@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If there is an error to create the first netns with 'setup_ns()',
'cleanup_ns()' will be called with an empty string as first parameter.

The consequences is that 'cleanup_ns()' will try to delete an invalid
netns, and wait 20 seconds if the netns list is empty.

Instead of just checking if the name is not empty, convert the string
separated by spaces to an array. Manipulating the array is cleaner, and
calling 'cleanup_ns()' with an empty array will be a no-op.

Fixes: 25ae948b ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-2-b3afadd368c9@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If errexit is enabled ('set -e'), loopy_wait -- or busywait and others
using it -- will stop after the first failure.

Note that if the returned status of loopy_wait is checked, and even if
errexit is enabled, Bash will not stop at the first error.

Fixes: 25ae948b ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-1-b3afadd368c9@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Clang static checker (scan-build) warning:
net/ethtool/ioctl.c:line 2233, column 2
Called function pointer is null (null dereference).

Return '-EOPNOTSUPP' when 'ops->get_ethtool_phy_stats' is NULL to fix
this typo error.

Fixes: 201ed315 ("net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpers")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240605034742.921751-1-suhui@nfschina.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

syzbot found a race in __fib6_drop_pcpu_from() [1]

If compiler reads more than once (*ppcpu_rt),
second read could read NULL, if another cpu clears
the value in rt6_get_pcpu_route().

Add a READ_ONCE() to prevent this race.

Also add rcu_read_lock()/rcu_read_unlock() because
we rely on RCU protection while dereferencing pcpu_rt.

[1]

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 0 PID: 7543 Comm: kworker/u8:17 Not tainted 6.10.0-rc1-syzkaller-00013-g2bfcfd58 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Workqueue: netns cleanup_net
 RIP: 0010:__fib6_drop_pcpu_from.part.0+0x10a/0x370 net/ipv6/ip6_fib.c:984
Code: f8 48 c1 e8 03 80 3c 28 00 0f 85 16 02 00 00 4d 8b 3f 4d 85 ff 74 31 e8 74 a7 fa f7 49 8d bf 90 00 00 00 48 89 f8 48 c1 e8 03 <80> 3c 28 00 0f 85 1e 02 00 00 49 8b 87 90 00 00 00 48 8b 0c 24 48
RSP: 0018:ffffc900040df070 EFLAGS: 00010206
RAX: 0000000000000012 RBX: 0000000000000001 RCX: ffffffff89932e16
RDX: ffff888049dd1e00 RSI: ffffffff89932d7c RDI: 0000000000000091
RBP: dffffc0000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 0000000000000001 R11: 0000000000000006 R12: ffff88807fa080b8
R13: fffffbfff1a9a07d R14: ffffed100ff41022 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff8880b9200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32c26000 CR3: 000000005d56e000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  __fib6_drop_pcpu_from net/ipv6/ip6_fib.c:966 [inline]
  fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1027 [inline]
  fib6_purge_rt+0x7f2/0x9f0 net/ipv6/ip6_fib.c:1038
  fib6_del_route net/ipv6/ip6_fib.c:1998 [inline]
  fib6_del+0xa70/0x17b0 net/ipv6/ip6_fib.c:2043
  fib6_clean_node+0x426/0x5b0 net/ipv6/ip6_fib.c:2205
  fib6_walk_continue+0x44f/0x8d0 net/ipv6/ip6_fib.c:2127
  fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2175
  fib6_clean_tree+0xd7/0x120 net/ipv6/ip6_fib.c:2255
  __fib6_clean_all+0x100/0x2d0 net/ipv6/ip6_fib.c:2271
  rt6_sync_down_dev net/ipv6/route.c:4906 [inline]
  rt6_disable_ip+0x7ed/0xa00 net/ipv6/route.c:4911
  addrconf_ifdown.isra.0+0x117/0x1b40 net/ipv6/addrconf.c:3855
  addrconf_notify+0x223/0x19e0 net/ipv6/addrconf.c:3778
  notifier_call_chain+0xb9/0x410 kernel/notifier.c:93
  call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1992
  call_netdevice_notifiers_extack net/core/dev.c:2030 [inline]
  call_netdevice_notifiers net/core/dev.c:2044 [inline]
  dev_close_many+0x333/0x6a0 net/core/dev.c:1585
  unregister_netdevice_many_notify+0x46d/0x19f0 net/core/dev.c:11193
  unregister_netdevice_many net/core/dev.c:11276 [inline]
  default_device_exit_batch+0x85b/0xae0 net/core/dev.c:11759
  ops_exit_list+0x128/0x180 net/core/net_namespace.c:178
  cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640
  process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
  process_scheduled_works kernel/workqueue.c:3312 [inline]
  worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393
  kthread+0x2c1/0x3a0 kernel/kthread.c:389
  ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Fixes: d52d3997 ("ipv6: Create percpu rt6_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20240604193549.981839-1-edumazet@google.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Kuniyuki Iwashima says:

====================
af_unix: Fix lockless access of sk->sk_state and others fields.

The patch 1 fixes a bug where SOCK_DGRAM's sk->sk_state is changed
to TCP_CLOSE even if the socket is connect()ed to another socket.

The rest of this series annotates lockless accesses to the following
fields.

  * sk->sk_state
  * sk->sk_sndbuf
  * net->unx.sysctl_max_dgram_qlen
  * sk->sk_receive_queue.qlen
  * sk->sk_shutdown

Note that with this series there is skb_queue_empty() left in
unix_dgram_disconnected() that needs to be changed to lockless
version, and unix_peer(other) access there should be protected
by unix_state_lock().

This will require some refactoring, so another series will follow.

Changes:
  v2:
    * Patch 1: Fix wrong double lock

  v1: https://lore.kernel.org/netdev/20240603143231.62085-1-kuniyu@amazon.com/
====================

Link: https://lore.kernel.org/r/20240604165241.44758-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

While dumping sockets via UNIX_DIAG, we do not hold unix_state_lock().

Let's use READ_ONCE() to read sk->sk_shutdown.

Fixes: e4e541a8 ("sock-diag: Report shutdown for inet and unix sockets (v2)")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We can dump the socket queue length via UNIX_DIAG by specifying
UDIAG_SHOW_RQLEN.

If sk->sk_state is TCP_LISTEN, we return the recv queue length,
but here we do not hold recvq lock.

Let's use skb_queue_len_lockless() in sk_diag_show_rqlen().

Fixes: c9da99e6 ("unix_diag: Fixup RQLEN extension report")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

If the socket type is SOCK_STREAM or SOCK_SEQPACKET, unix_release_sock()
checks the length of the peer socket's recvq under unix_state_lock().

However, unix_stream_read_generic() calls skb_unlink() after releasing
the lock.  Also, for SOCK_SEQPACKET, __skb_try_recv_datagram() unlinks
skb without unix_state_lock().

Thues, unix_state_lock() does not protect qlen.

Let's use skb_queue_empty_lockless() in unix_release_sock().

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Once sk->sk_state is changed to TCP_LISTEN, it never changes.

unix_accept() takes advantage of this characteristics; it does not
hold the listener's unix_state_lock() and only acquires recvq lock
to pop one skb.

It means unix_state_lock() does not prevent the queue length from
changing in unix_stream_connect().

Thus, we need to use unix_recvq_full_lockless() to avoid data-race.

Now we remove unix_recvq_full() as no one uses it.

Note that we can remove READ_ONCE() for sk->sk_max_ack_backlog in
unix_recvq_full_lockless() because of the following reasons:

  (1) For SOCK_DGRAM, it is a written-once field in unix_create1()

  (2) For SOCK_STREAM and SOCK_SEQPACKET, it is changed under the
      listener's unix_state_lock() in unix_listen(), and we hold
      the lock in unix_stream_connect()

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net->unx.sysctl_max_dgram_qlen is exposed as a sysctl knob and can be
changed concurrently.

Let's use READ_ONCE() in unix_create1().

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sk_setsockopt() changes sk->sk_sndbuf under lock_sock(), but it's
not used in af_unix.c.

Let's use READ_ONCE() to read sk->sk_sndbuf in unix_writable(),
unix_dgram_sendmsg(), and unix_stream_sendmsg().

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

While dumping AF_UNIX sockets via UNIX_DIAG, sk->sk_state is read
locklessly.

Let's use READ_ONCE() there.

Note that the result could be inconsistent if the socket is dumped
during the state change.  This is common for other SOCK_DIAG and
similar interfaces.

Fixes: c9da99e6 ("unix_diag: Fixup RQLEN extension report")
Fixes: 2aac7a2c ("unix_diag: Pending connections IDs NLA")
Fixes: 45a96b9b ("unix_diag: Dumping all sockets core")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

unix_stream_read_skb() is called from sk->sk_data_ready() context
where unix_state_lock() is not held.

Let's use READ_ONCE() there.

Fixes: 77462de1 ("af_unix: Add read_sock for stream socket types")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The following functions read sk->sk_state locklessly and proceed only if
the state is TCP_ESTABLISHED.

  * unix_stream_sendmsg
  * unix_stream_read_generic
  * unix_seqpacket_sendmsg
  * unix_seqpacket_recvmsg

Let's use READ_ONCE() there.

Fixes: a05d2ad1 ("af_unix: Only allow recv on connected seqpacket sockets.")
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Once sk->sk_state is changed to TCP_LISTEN, it never changes.

unix_accept() takes the advantage and reads sk->sk_state without
holding unix_state_lock().

Let's use READ_ONCE() there.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

As small optimisation, unix_stream_connect() prefetches the client's
sk->sk_state without unix_state_lock() and checks if it's TCP_CLOSE.

Later, sk->sk_state is checked again under unix_state_lock().

Let's use READ_ONCE() for the first check and TCP_CLOSE directly for
the second check.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

unix_poll() and unix_dgram_poll() read sk->sk_state locklessly and
calls unix_writable() which also reads sk->sk_state without holding
unix_state_lock().

Let's use READ_ONCE() in unix_poll() and unix_dgram_poll() and pass
it to unix_writable().

While at it, we remove TCP_SYN_SENT check in unix_dgram_poll() as
that state does not exist for AF_UNIX socket since the code was added.

Fixes: 1586a587 ("af_unix: do not report POLLOUT on listeners")
Fixes: 3c73419c ("af_unix: fix 'poll for write'/ connected DGRAM sockets")
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ioctl(SIOCINQ) calls unix_inq_len() that checks sk->sk_state first
and returns -EINVAL if it's TCP_LISTEN.

Then, for SOCK_STREAM sockets, unix_inq_len() returns the number of
bytes in recvq.

However, unix_inq_len() does not hold unix_state_lock(), and the
concurrent listen() might change the state after checking sk->sk_state.

If the race occurs, 0 is returned for the listener, instead of -EINVAL,
because the length of skb with embryo is 0.

We could hold unix_state_lock() in unix_inq_len(), but it's overkill
given the result is true for pre-listen() TCP_CLOSE state.

So, let's use READ_ONCE() for sk->sk_state in unix_inq_len().

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sk->sk_state is changed under unix_state_lock(), but it's read locklessly
in many places.

This patch adds WRITE_ONCE() on the writer side.

We will add READ_ONCE() to the lockless readers in the following patches.

Fixes: 83301b53 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too")
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When a SOCK_DGRAM socket connect()s to another socket, the both sockets'
sk->sk_state are changed to TCP_ESTABLISHED so that we can register them
to BPF SOCKMAP.

When the socket disconnects from the peer by connect(AF_UNSPEC), the state
is set back to TCP_CLOSE.

Then, the peer's state is also set to TCP_CLOSE, but the update is done
locklessly and unconditionally.

Let's say socket A connect()ed to B, B connect()ed to C, and A disconnects
from B.

After the first two connect()s, all three sockets' sk->sk_state are
TCP_ESTABLISHED:

  $ ss -xa
  Netid State  Recv-Q Send-Q  Local Address:Port  Peer Address:PortProcess
  u_dgr ESTAB  0      0       @A 641              * 642
  u_dgr ESTAB  0      0       @B 642              * 643
  u_dgr ESTAB  0      0       @C 643              * 0

And after the disconnect, B's state is TCP_CLOSE even though it's still
connected to C and C's state is TCP_ESTABLISHED.

  $ ss -xa
  Netid State  Recv-Q Send-Q  Local Address:Port  Peer Address:PortProcess
  u_dgr UNCONN 0      0       @A 641              * 0
  u_dgr UNCONN 0      0       @B 642              * 643
  u_dgr ESTAB  0      0       @C 643              * 0

In this case, we cannot register B to SOCKMAP.

So, when a socket disconnects from the peer, we should not set TCP_CLOSE to
the peer if the peer is connected to yet another socket, and this must be
done under unix_state_lock().

Note that we use WRITE_ONCE() for sk->sk_state as there are many lockless
readers.  These data-races will be fixed in the following patches.

Fixes: 83301b53 ("af_unix: Set TCP_ESTABLISHED for datagram sockets too")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In case of region creation fail in ipc_devlink_create_region(), previously
created regions delete process starts from tainted pointer which actually
holds error code value.
Fix this bug by decreasing region index before delete.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4dcd183f ("net: wwan: iosm: devlink registration")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240604082500.20769-1-amishin@t-argos.ruSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Jacob Keller says:

====================
Intel Wired LAN Driver Updates 2024-05-29 (ice, igc)

This series includes fixes for the ice driver as well as a fix for the igc
driver.

Jacob fixes two issues in the ice driver with reading the NVM for providing
firmware data via devlink info. First, fix an off-by-one error when reading
the Preserved Fields Area, resolving an infinite loop triggered on some
NVMs which lack certain data in the NVM. Second, fix the reading of the NVM
Shadow RAM on newer E830 and E825-C devices which have a variable sized CSS
header rather than assuming this header is always the same fixed size as in
the E810 devices.

Larysa fixes three issues with the ice driver XDP logic that could occur if
the number of queues is changed after enabling an XDP program. First, the
af_xdp_zc_qps bitmap is removed and replaced by simpler logic to track
whether queues are in zero-copy mode. Second, the reset and .ndo_bpf flows
are distinguished to avoid potential races with a PF reset occuring
simultaneously to .ndo_bpf callback from userspace. Third, the logic for
mapping XDP queues to vectors is fixed so that XDP state is restored for
XDP queues after a reconfiguration.

Sasha fixes reporting of Energy Efficient Ethernet support via ethtool in
the igc driver.

v1: https://lore.kernel.org/r/20240530-net-2024-05-30-intel-net-fixes-v1-0-8b11c8c9bff8@intel.com
====================

Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-0-e3563aa89b0c@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The commit 01cf893b ("net: intel: i40e/igc: Remove setting Autoneg in
EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate
ethtool_keee structure initialization. When "ethtool --show <device>"
(get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden.
Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE
specification that allows reporting Energy Efficient Ethernet capabilities.

Examples:
Before fix:
ethtool --show-eee enp174s0
EEE settings for enp174s0:
	EEE status: not supported

After fix:
EEE settings for enp174s0:
	EEE status: disabled
	Tx LPI: disabled
	Supported EEE link modes:  100baseT/Full
	                           1000baseT/Full
	                           2500baseT/Full

Fixes: 01cf893b ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ice_pf_dcb_recfg() re-maps queues to vectors with
ice_vsi_map_rings_to_vectors(), which does not restore the previous
state for XDP queues. This leads to no AF_XDP traffic after rebuild.

Map XDP queues to vectors in ice_vsi_map_rings_to_vectors().
Also, move the code around, so XDP queues are mapped independently only
through .ndo_bpf().

Fixes: 6624e780 ("ice: split ice_vsi_setup into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-5-e3563aa89b0c@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 6624e780 ("ice: split ice_vsi_setup into smaller functions")
has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in
the rebuild process. The behaviour of the XDP rings config functions is
context-dependent, so the change of order has led to
ice_destroy_xdp_rings() doing additional work and removing XDP prog, when
it was supposed to be preserved.

Also, dependency on the PF state reset flags creates an additional,
fortunately less common problem:

* PFR is requested e.g. by tx_timeout handler
* .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(),
  but reset flag is set, so rings are destroyed without deleting the
  program
* ice_vsi_rebuild tries to delete non-existent XDP rings, because the
  program is still on the VSI
* system crashes

With a similar race, when requested to attach a program,
ice_prepare_xdp_rings() can actually skip setting the program in the VSI
and nevertheless report success.

Instead of reverting to the old order of function calls, add an enum
argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in
order to distinguish between calls from rebuild and .ndo_bpf().

Fixes: efc2214b ("ice: Add support for XDP")
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Referenced commit has introduced a bitmap to distinguish between ZC and
copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this
for us.

The bitmap would be especially useful when restoring previous state after
rebuild, if only it was not reallocated in the process. This leads to e.g.
xdpsock dying after changing number of queues.

Instead of preserving the bitmap during the rebuild, remove it completely
and distinguish between ZC and copy-mode queues based on the presence of
a device associated with the pool.

Fixes: e102db78 ("ice: track AF_XDP ZC enabled queues in bitmap")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-3-e3563aa89b0c@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ice driver reads data from the Shadow RAM portion of the NVM during
initialization, including data used to identify the NVM image and device,
such as the ETRACK ID used to populate devlink dev info fw.bundle.

Currently it is using a fixed offset defined by ICE_CSS_HEADER_LENGTH to
compute the appropriate offset. This worked fine for E810 and E822 devices
which both have CSS header length of 330 words.

Other devices, including both E825-C and E830 devices have different sizes
for their CSS header. The use of a hard coded value results in the driver
reading from the wrong block in the NVM when attempting to access the
Shadow RAM copy. This results in the driver reporting the fw.bundle as 0x0
in both the devlink dev info and ethtool -i output.

The first E830 support was introduced by commit ba20ecb1 ("ice: Hook up
4 E830 devices by adding their IDs") and the first E825-C support was
introducted by commit f64e1894 ("ice: introduce new E825C devices
family")

The NVM actually contains the CSS header length embedded in it. Remove the
hard coded value and replace it with logic to read the length from the NVM
directly. This is more resilient against all existing and future hardware,
vs looking up the expected values from a table. It ensures the driver will
read from the appropriate place when determining the ETRACK ID value used
for populating the fw.bundle_id and for reporting in ethtool -i.

The CSS header length for both the active and inactive flash bank is stored
in the ice_bank_info structure to avoid unnecessary duplicate work when
accessing multiple words of the Shadow RAM. Both banks are read in the
unlikely event that the header length is different for the NVM in the
inactive bank, rather than being different only by the overall device
family.

Fixes: ba20ecb1 ("ice: Hook up 4 E830 devices by adding their IDs")
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-2-e3563aa89b0c@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ice_get_pfa_module_tlv() function iterates over the Type-Length-Value
structures in the Preserved Fields Area (PFA) of the NVM. This is used by
the driver to access data such as the Part Board Assembly identifier.

The function uses simple logic to iterate over the PFA. First, the pointer
to the PFA in the NVM is read. Then the total length of the PFA is read
from the first word.

A pointer to the first TLV is initialized, and a simple loop iterates over
each TLV. The pointer is moved forward through the NVM until it exceeds the
PFA area.

The logic seems sound, but it is missing a key detail. The Preserved
Fields Area length includes one additional final word. This is documented
in the device data sheet as a dummy word which contains 0xFFFF. All NVMs
have this extra word.

If the driver tries to scan for a TLV that is not in the PFA, it will read
past the size of the PFA. It reads and interprets the last dummy word of
the PFA as a TLV with type 0xFFFF. It then reads the word following the PFA
as a length.

The PFA resides within the Shadow RAM portion of the NVM, which is
relatively small. All of its offsets are within a 16-bit size. The PFA
pointer and TLV pointer are stored by the driver as 16-bit values.

In almost all cases, the word following the PFA will be such that
interpreting it as a length will result in 16-bit arithmetic overflow. Once
overflowed, the new next_tlv value is now below the maximum offset of the
PFA. Thus, the driver will continue to iterate the data as TLVs. In the
worst case, the driver hits on a sequence of reads which loop back to
reading the same offsets in an endless loop.

To fix this, we need to correct the loop iteration check to account for
this extra word at the end of the PFA. This alone is sufficient to resolve
the known cases of this issue in the field. However, it is plausible that
an NVM could be misconfigured or have corrupt data which results in the
same kind of overflow. Protect against this by using check_add_overflow
when calculating both the maximum offset of the TLVs, and when calculating
the next_tlv offset at the end of each loop iteration. This ensures that
the driver will not get stuck in an infinite loop when scanning the PFA.

Fixes: e961b679 ("ice: add board identifier info to devlink .info_get")
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-1-e3563aa89b0c@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2024-06-05

We've added 8 non-merge commits during the last 6 day(s) which contain
a total of 9 files changed, 34 insertions(+), 35 deletions(-).

The main changes are:

1) Fix a potential use-after-free in bpf_link_free when the link uses
   dealloc_deferred to free the link object but later still tests for
   presence of link->ops->dealloc, from Cong Wang.

2) Fix BPF test infra to set the run context for rawtp test_run callback
   where syzbot reported a crash, from Jiri Olsa.

3) Fix bpf_session_cookie BTF_ID in the special_kfunc_set list to exclude
   it for the case of !CONFIG_FPROBE, also from Jiri Olsa.

4) Fix a Coverity static analysis report to not close() a link_fd of -1
   in the multi-uprobe feature detector, from Andrii Nakryiko.

5) Revert support for redirect to any xsk socket bound to the same umem
   as it can result in corrupted ring state which can lead to a crash when
   flushing rings. A different approach will be pursued for bpf-next to
   address it safely, from Magnus Karlsson.

6) Fix inet_csk_accept prototype in test_sk_storage_tracing.c which caused
   BPF CI failure after the last tree fast forwarding, from Andrii Nakryiko.

7) Fix a coccicheck warning in BPF devmap that iterator variable cannot
   be NULL, from Thorsten Blum.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  Revert "xsk: Document ability to redirect to any socket bound to the same umem"
  Revert "xsk: Support redirect to any socket bound to the same umem"
  bpf: Set run context for rawtp test_run callback
  bpf: Fix a potential use-after-free in bpf_link_free()
  bpf, devmap: Remove unnecessary if check in for loop
  libbpf: don't close(-1) in multi-uprobe feature detector
  bpf: Fix bpf_session_cookie BTF_ID in special_kfunc_set list
  selftests/bpf: fix inet_csk_accept prototype in test_sk_storage_tracing.c
====================

Link: https://lore.kernel.org/r/20240605091525.22628-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On failed verification of PTP clock pin, error message prints channel
number instead of pin index after "pin", which is incorrect.

Fix error message by adding channel number to the message and printing
pin number instead of channel number.

Fixes: 6092315d ("ptp: introduce programmable pins.")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20240604120555.16643-1-karol.kolacinski@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided,
taprio_parse_mqprio_opt() must validate it, or userspace
can inject arbitrary data to the kernel, the second time
taprio_change() is called.

First call (with valid attributes) sets dev->num_tc
to a non zero value.

Second call (with arbitrary mqprio attributes)
returns early from taprio_parse_mqprio_opt()
and bad things can happen.

Fixes: a3d43c0d ("taprio: Add support adding an admin schedule")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240604181511.769870-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull thermal control fixes from Rafael Wysocki:
 "Fix issues related to the handling of invalid trip points in the
  thermal core and in the thermal debug code that have been overlooked
  by some recent thermal control core changes"

* tag 'thermal-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: trip: Trigger trip down notifications when trips involved in mitigation become invalid
  thermal: core: Introduce thermal_trip_crossed()
  thermal/debugfs: Allow tze_seq_show() to print statistics for invalid trips
  thermal/debugfs: Print initial trip temperature and hysteresis in tze_seq_show()

Pull ACPI fixes from Rafael Wysocki:
 "These fix the ACPI EC and AC drivers, the ACPI APEI error injection
  driver and build issues related to the dev_is_pnp() macro referring to
  pnp_bus_type that is not exported to modules.

  Specifics:

   - Fix error handling during EC operation region accesses in the ACPI
     EC driver (Armin Wolf)

   - Fix a memory leak in the APEI error injection driver introduced
     during its converion to a platform driver (Dan Williams)

   - Fix build failures related to the dev_is_pnp() macro by redefining
     it as a proper function and exporting it to modules as appropriate
     and unexport pnp_bus_type which need not be exported any more (Andy
     Shevchenko)

   - Update the ACPI AC driver to use power_supply_changed() to let the
     power supply core handle configuration changes properly (Thomas
     Weißschuh)"

* tag 'acpi-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: AC: Properly notify powermanagement core about changes
  PNP: Hide pnp_bus_type from the non-PNP code
  PNP: Make dev_is_pnp() to be a function and export it for modules
  ACPI: EC: Avoid returning AE_OK on errors in address space handler
  ACPI: EC: Abort address space access upon error
  ACPI: APEI: EINJ: Fix einj_dev release leak