- 18 Aug, 2022 17 commits
-
-
Geert Uytterhoeven authored
Lots of double occurrences of "the" were replaced by single occurrences, but some of them should become "to the" instead. Fixes: 12e5bde1 ("dt-bindings: Fix typo in comment") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/c5743c0a1a24b3a8893797b52fed88b99e56b04b.1660755148.git.geert+renesas@glider.beSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
If construction of the array of policies fails when recording non-first policy we need to unwind. netlink_policy_dump_add_policy() itself also needs fixing as it currently gives up on error without recording the allocated pointer in the pstate pointer. Reported-by: syzbot+dc54d9ba8153b216cae0@syzkaller.appspotmail.com Fixes: 50a896cf ("genetlink: properly support per-op policy dumping") Link: https://lore.kernel.org/r/20220816161939.577583-1-kuba@kernel.orgSigned-off-by:
-
Christophe JAILLET authored
Commit 09f012e6 ("stmmac: intel: Fix clock handling on error and remove paths") removed this clk_disable_unprepare() This was partly revert by commit ac322f86 ("net: stmmac: Fix clock handling on remove path") which removed this clk_disable_unprepare() because: " While unloading the dwmac-intel driver, clk_disable_unprepare() is being called twice in stmmac_dvr_remove() and intel_eth_pci_remove(). This causes kernel panic on the second call. " However later on, commit 5ec55823 ("net: stmmac: add clocks management for gmac driver") has updated stmmac_dvr_remove() which do not call clk_disable_unprepare() anymore. So this call should now be called from intel_eth_pci_remove(). Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Lorenzo Bianconi authored
Fix possible NULL pointer dereference in mtk_xdp_run() if the ebpf program returns XDP_TX and xdp_convert_buff_to_frame routine fails returning NULL. Fixes: 5886d26f ("net: ethernet: mtk_eth_soc: add xmit XDP support") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/627a07d759020356b64473e09f0855960e02db28.1660659112.git.lorenzo@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
IPsec code relies on valid priv->fs pointer that is the case in NIC flow, but not correct in uplink. Before commit that mentioned in the Fixes line, that pointer was valid in all flows as it was allocated together with priv struct. In addition, the cleanup representors routine called to that not-initialized priv->fs pointer and its internals which caused NULL deference. So, move FS allocation to be as early as possible. Fixes: af8bbf73 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/ae46fa5bed3c67f937bfdfc0370101278f5422f1.1660639564.git.leonro@nvidia.comSigned-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Fixes for Ocelot driver statistics This series contains bug fixes for the ocelot drivers (both switchdev and DSA). Some concern the counters exposed to ethtool -S, and others to the counters exposed to ifconfig. I'm aware that the changes are fairly large, but I wanted to prioritize on a proper approach to addressing the issues rather than a quick hack. Some of the noticed problems: - bad register offsets for some counters - unhandled concurrency leading to corrupted counters - unhandled 32-bit wraparound of ifconfig counters The issues on the ocelot switchdev driver were noticed through code inspection, I do not have the hardware to test. This patch set necessarily converts ocelot->stats_lock from a mutex to a spinlock. I know this affects Colin Foster's development with the SPI controlled VSC7512. I have other changes prepared for net-next that convert this back into a mutex (along with other changes in this area). ==================== Link: https://lore.kernel.org/r/20220816135352.1431497-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Rather than reading the stats64 counters directly from the 32-bit hardware, it's better to rely on the output produced by the periodic ocelot_port_update_stats(). It would be even better to call ocelot_port_update_stats() right from ocelot_get_stats64() to make sure we report the current values rather than the ones from 2 seconds ago. But we need to export ocelot_port_update_stats() from the switch lib towards the switchdev driver for that, and future work will largely undo that. There are more ocelot-based drivers waiting to be introduced, an example of which is the SPI-controlled VSC7512. In that driver's case, it will be impossible to call ocelot_port_update_stats() from ndo_get_stats64 context, since the latter is atomic, and reading the stats over SPI is sleepable. So the compromise taken here, which will also hold going forward, is to report 64-bit counters to stats64, which are not 100% up to date. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
With so many counter addresses recently discovered as being wrong, it is desirable to at least have a central database of information, rather than two: one through the SYS_COUNT_* registers (used for ndo_get_stats64), and the other through the offset field of struct ocelot_stat_layout elements (used for ethtool -S). The strategy will be to keep the SYS_COUNT_* definitions as the single source of truth, but for that we need to expand our current definitions to cover all registers. Then we need to convert the ocelot region creation logic, and stats worker, to the read semantics imposed by going through SYS_COUNT_* absolute register addresses, rather than offsets of 32-bit words relative to SYS_COUNT_RX_OCTETS (which should have been SYS_CNT, by the way). Signed-off-by:
-
Vladimir Oltean authored
The ocelot counters are 32-bit and require periodic reading, every 2 seconds, by ocelot_port_update_stats(), so that wraparounds are detected. Currently, the counters reported by ocelot_get_stats64() come from the 32-bit hardware counters directly, rather than from the 64-bit accumulated ocelot->stats, and this is a problem for their integrity. The strategy is to make ocelot_get_stats64() able to cherry-pick individual stats from ocelot->stats the way in which it currently reads them out from SYS_COUNT_* registers. But currently it can't, because ocelot->stats is an opaque u64 array that's used only to feed data into ethtool -S. To solve that problem, we need to make ocelot->stats indexable, and associate each element with an element of struct ocelot_stat_layout used by ethtool -S. This makes ocelot_stat_layout a fat (and possibly sparse) array, so we need to change the way in which we access it. We no longer need OCELOT_STAT_END as a sentinel, because we know the array's size (OCELOT_NUM_STATS). We just need to skip the array elements that were left unpopulated for the switch revision (ocelot, felix, seville). Signed-off-by:
-
Vladimir Oltean authored
The 2 methods can run concurrently, and one will change the window of counters (SYS_STAT_CFG_STAT_VIEW) that the other sees. The fix is similar to what commit 7fbf6795 ("net: mscc: ocelot: fix mutex lock error during ethtool stats read") has done for ethtool -S. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
-
Vladimir Oltean authored
ocelot_get_stats64() currently runs unlocked and therefore may collide with ocelot_port_update_stats() which indirectly accesses the same counters. However, ocelot_get_stats64() runs in atomic context, and we cannot simply take the sleepable ocelot->stats_lock mutex. We need to convert it to an atomic spinlock first. Do that as a preparatory change. Signed-off-by:
-
Vladimir Oltean authored
This register, used as part of stats->tx_dropped in ocelot_get_stats64(), has a wrong address. At the address currently given, there is actually the c_tx_green_prio_6 counter. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
-
Vladimir Oltean authored
Reading stats using the SYS_COUNT_* register definitions is only used by ocelot_get_stats64() from the ocelot switchdev driver, however, currently the bucket definitions are incorrect. Separately, on both RX and TX, we have the following problems: - a 256-1023 bucket which actually tracks the 256-511 packets - the 1024-1526 bucket actually tracks the 512-1023 packets - the 1527-max bucket actually tracks the 1024-1526 packets => nobody tracks the packets from the real 1527-max bucket Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS all track the wrong thing. However this doesn't seem to have any consequence, since ocelot_get_stats64() doesn't use these. Even though this problem only manifests itself for the switchdev driver, we cannot split the fix for ocelot and for DSA, since it requires fixing the bucket definitions from enum ocelot_reg, which makes us necessarily adapt the structures from felix and seville as well. Fixes: 84705fc1 ("net: dsa: felix: introduce support for Seville VSC9953 switch") Fixes: 56051948 ("net: dsa: ocelot: add driver for Felix switch family") Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
-
Vladimir Oltean authored
What the driver actually reports as 256-511 is in fact 512-1023, and the TX packets in the 256-511 bucket are not reported. Fix that. Fixes: 56051948 ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by:
-
Vladimir Oltean authored
ds->ops->port_stp_state_set() is, like most DSA methods, optional, and if absent, the port is supposed to remain in the forwarding state (as standalone). Such is the case with the mv88e6060 driver, which does not offload the bridge layer. DSA warns that the STP state can't be changed to FORWARDING as part of dsa_port_enable_rt(), when in fact it should not. The error message is also not up to modern standards, so take the opportunity to make it more descriptive. Fixes: fd364541 ("net: dsa: change scope of STP state setter") Reported-by:
Sergei Antonov <saproj@gmail.com> Signed-off-by:
-
Rustam Subkhankulov authored
If an error occurs in dsa_devlink_region_create(), then 'priv->regions' array will be accessed by negative index '-1'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Rustam Subkhankulov <subkhankulov@ispras.ru> Fixes: bf425b82 ("net: dsa: sja1105: expose static config as devlink region") Link: https://lore.kernel.org/r/20220817003845.389644-1-subkhankulov@ispras.ruSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Florian Westphal says: ==================== netfilter: conntrack and nf_tables bug fixes The following patchset contains netfilter fixes for net. Broken since 5.19: A few ancient connection tracking helpers assume TCP packets cannot exceed 64kb in size, but this isn't the case anymore with 5.19 when BIG TCP got merged, from myself. Regressions since 5.19: 1. 'conntrack -E expect' won't display anything because nfnetlink failed to enable events for expectations, only for normal conntrack events. 2. partially revert change that added resched calls to a function that can be in atomic context. Both broken and fixed up by myself. Broken for several releases (up to original merge of nf_tables): Several fixes for nf_tables control plane, from Pablo. This fixes up resource leaks in error paths and adds more sanity checks for mutually exclusive attributes/flags. Kconfig: NF_CONNTRACK_PROCFS is very old and doesn't provide all info provided via ctnetlink, so it should not default to y. From Geert Uytterhoeven. Selftests: rework nft_flowtable.sh: it frequently indicated failure; the way it tried to detect an offload failure did not work reliably. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: testing: selftests: nft_flowtable.sh: rework test to detect offload failure testing: selftests: nft_flowtable.sh: use random netns names netfilter: conntrack: NF_CONNTRACK_PROCFS should no longer default to y netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified netfilter: nf_tables: disallow NFT_SET_ELEM_CATCHALL and NFT_SET_ELEM_INTERVAL_END netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag netfilter: nf_tables: really skip inactive sets when allocating name netfilter: nfnetlink: re-enable conntrack expectation events netfilter: nf_tables: fix scheduling-while-atomic splat netfilter: nf_ct_irc: cap packet search space to 4k netfilter: nf_ct_ftp: prefer skb_linearize netfilter: nf_ct_h323: cap packet size at 64k netfilter: nf_ct_sane: remove pseudo skb linearization netfilter: nf_tables: possible module reference underflow in error path netfilter: nf_tables: disallow NFTA_SET_ELEM_KEY_END with NFT_SET_ELEM_INTERVAL_END flag netfilter: nf_tables: use READ_ONCE and WRITE_ONCE for shared generation id access ==================== Link: https://lore.kernel.org/r/20220817140015.25843-1-fw@strlen.deSigned-off-by:
-
- 17 Aug, 2022 8 commits
-
-
David Howells authored
bpf_sk_reuseport_detach() calls __rcu_dereference_sk_user_data_with_flags() to obtain the value of sk->sk_user_data, but that function is only usable if the RCU read lock is held, and neither that function nor any of its callers hold it. Fix this by adding a new helper, __locked_read_sk_user_data_with_flags() that checks to see if sk->sk_callback_lock() is held and use that here instead. Alternatively, making __rcu_dereference_sk_user_data_with_flags() use rcu_dereference_checked() might suffice. Without this, the following warning can be occasionally observed: ============================= WARNING: suspicious RCU usage 6.0.0-rc1-build2+ #563 Not tainted ----------------------------- include/net/sock.h:592 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by locktest/29873: #0: ffff88812734b550 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x77/0x121 #1: ffff88812f5621b0 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_close+0x1c/0x70 #2: ffff88810312f5c8 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_unhash+0x76/0x1c0 #3: ffffffff83768bb8 (reuseport_lock){+...}-{2:2}, at: reuseport_detach_sock+0x18/0xdd #4: ffff88812f562438 (clock-AF_INET){++..}-{2:2}, at: bpf_sk_reuseport_detach+0x24/0xa4 stack backtrace: CPU: 1 PID: 29873 Comm: locktest Not tainted 6.0.0-rc1-build2+ #563 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: <TASK> dump_stack_lvl+0x4c/0x5f bpf_sk_reuseport_detach+0x6d/0xa4 reuseport_detach_sock+0x75/0xdd inet_unhash+0xa5/0x1c0 tcp_set_state+0x169/0x20f ? lockdep_sock_is_held+0x3a/0x3a ? __lock_release.isra.0+0x13e/0x220 ? reacquire_held_locks+0x1bb/0x1bb ? hlock_class+0x31/0x96 ? mark_lock+0x9e/0x1af __tcp_close+0x50/0x4b6 tcp_close+0x28/0x70 inet_release+0x8e/0xa7 __sock_release+0x95/0x121 sock_close+0x14/0x17 __fput+0x20f/0x36a task_work_run+0xa3/0xcc exit_to_user_mode_prepare+0x9c/0x14d syscall_exit_to_user_mode+0x18/0x44 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: cf8c1e96 ("net: refactor bpf_sk_reuseport_detach()") Signed-off-by:David Howells <dhowells@redhat.com> cc: Hawkins Jiawei <yin31149@gmail.com> Link: https://lore.kernel.org/r/166064248071.3502205.10036394558814861778.stgit@warthog.procyon.org.ukSigned-off-by:
-
Arun Ramadoss authored
In the ksz9477_fdb_dump function it reads the ALU control register and exit from the timeout loop if there is valid entry or search is complete. After exiting the loop, it reads the alu entry and report to the user space irrespective of entry is valid. It works till the valid entry. If the loop exited when search is complete, it reads the alu table. The table returns all ones and it is reported to user space. So bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port. To fix it, after exiting the loop the entry is reported only if it is valid one. Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.comSigned-off-by:
-
Florian Westphal authored
This test fails on current kernel releases because the flotwable path now calls dst_check from packet path and will then remove the offload. Test script has two purposes: 1. check that file (random content) can be sent to other netns (and vv) 2. check that the flow is offloaded (rather than handled by classic forwarding path). Since dst_check is in place, 2) fails because the nftables ruleset in router namespace 1 intentionally blocks traffic under the assumption that packets are not passed via classic path at all. Rework this: Instead of blocking traffic, create two named counters, one for original and one for reverse direction. The first three test cases are handled by classic forwarding path (path mtu discovery is disabled and packets exceed MTU). But all other tests enable PMTUD, so the originator and responder are expected to lower packet size and flowtable is expected to do the packet forwarding. For those tests, check that the packet counters (which are only incremented for packets that are passed up to classic forward path) are significantly lower than the file size transferred. I've tested that the counter-checks fail as expected when the 'flow add' statement is removed from the ruleset. Signed-off-by:Florian Westphal <fw@strlen.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
==================== Intel Wired LAN Driver Updates 2022-08-16) This series contains updates to i40e driver only. Przemyslaw fixes issue with checksum offload on VXLAN tunnels. Alan disables VSI for Tx timeout when all recovery methods have failed. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Even though the normal strparser's init function has a return value we got away with ignoring errors until now, as it only validates the parameters and we were passing correct parameters. tls_strp can fail to init on memory allocation errors, which syzbot duly induced and reported. Reported-by: syzbot+abd45eb849b05194b1b6@syzkaller.appspotmail.com Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Signed-off-by:
-
Florian Westphal authored
"ns1" is a too generic name, use a random suffix to avoid errors when such a netns exists. Also allows to run multiple instances of the script in parallel. Signed-off-by: -
Geert Uytterhoeven authored
NF_CONNTRACK_PROCFS was marked obsolete in commit 54b07dca ("netfilter: provide config option to disable ancient procfs parts") in v3.3. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Zhengchao Shao authored
In the gnet_stats_add_queue_cpu function, the qstats->qlen statistics are incorrectly set to qcpu->backlog. Fixes: 448e163f ("gen_stats: Add gnet_stats_add_queue()") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220815030848.276746-1-shaozhengchao@huawei.comSigned-off-by:
-
- 16 Aug, 2022 5 commits
-
-
Alan Brady authored
When a tx_timeout fires, the PF attempts to recover by incrementally resetting. First we try a PFR, then CORER and finally a GLOBR. If the GLOBR fails, then we keep hitting the tx_timeout and incrementing the recovery level and issuing dmesgs, which is both annoying to the user and accomplishes nothing. If the GLOBR fails, then we're pretty much totally hosed, and there's not much else we can do to recover, so this makes it such that we just kill the VSI and stop hitting the tx_timeout in such a case. Fixes: 41c445ff ("i40e: main driver core") Signed-off-by:
Alan Brady <alan.brady@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Przemyslaw Patynowski authored
Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \ enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Without this patch, TX descriptor was using wrong data, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: b4fb2d33 ("i40e: Add support for MPLS + TSO") Signed-off-by:
Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by:
Marek Szlosek <marek.szlosek@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-12 (iavf) This series contains updates to iavf driver only. Przemyslaw frees memory for admin queues in initialization error paths, prevents freeing of vf_res which is causing null pointer dereference, and adjusts calls in error path of reset to avoid iavf_close() which could cause deadlock. Ivan Vecera avoids deadlock that can occur when driver if part of failover. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix deadlock in initialization iavf: Fix reset error handling iavf: Fix NULL pointer dereference in iavf_get_link_ksettings iavf: Fix adminq error handling ==================== Link: https://lore.kernel.org/r/20220812172309.853230-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Zhengchao Shao authored
When bulk delete command is received in the rtnetlink_rcv_msg function, if bulk delete is not supported, module_put is not called to release the reference counting. As a result, module reference count is leaked. Fixes: a6cec0bc ("net: rtnetlink: add bulk delete support flag") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220815024629.240367-1-shaozhengchao@huawei.comSigned-off-by:
-
Sergei Antonov authored
dma_map_single() calls fail in moxart_mac_setup_desc_ring() and moxart_mac_start_xmit() which leads to an incessant output of this: [ 16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error [ 16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error [ 16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error Passing pdev to DMA is a common approach among net drivers. Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
- 15 Aug, 2022 10 commits
-
-
Pablo Neira Ayuso authored
Since f3a2181e ("netfilter: nf_tables: Support for sets with multiple ranged fields"), it possible to combine intervals and concatenations. Later on, ef516e86 ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag") provides the NFT_SET_CONCAT flag for userspace to report that the set stores a concatenation. Make sure NFT_SET_CONCAT is set on if field_count is specified for consistency. Otherwise, if NFT_SET_CONCAT is specified with no field_count, bail out with EINVAL. Fixes: ef516e86 ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
These flags are mutually exclusive, report EINVAL in this case. Fixes: aaa31047 ("netfilter: nftables: add catch-all set element support") Signed-off-by:
-
Pablo Neira Ayuso authored
If the NFT_SET_CONCAT|NFT_SET_INTERVAL flags are set on, then the netlink attribute NFTA_SET_ELEM_KEY_END must be specified. Otherwise, NFTA_SET_ELEM_KEY_END should not be present. For catch-all element, NFTA_SET_ELEM_KEY_END should not be present. The NFT_SET_ELEM_INTERVAL_END is never used with this set flags combination. Fixes: 7b225d0b ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute") Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== mlxsw: Fixes for PTP support This set fixes several issues in mlxsw PTP code. - Patch #1 fixes compilation warnings. - Patch #2 adjusts the order of operation during cleanup, thereby closing the window after PTP state was already cleaned in the ASIC for the given port, but before the port is removed, when the user could still in theory make changes to the configuration. - Patch #3 protects the PTP configuration with a custom mutex, instead of relying on RTNL, which is not held in all access paths. - Patch #4 forbids enablement of PTP only in RX or only in TX. The driver implicitly assumed this would be the case, but neglected to sanitize the configuration. ==================== Signed-off-by: -
Amit Cohen authored
Currently mlxsw driver configures one global PTP configuration for all ports. The reason is that the switch behaves like a transparent clock between CPU port and front-panel ports. When time stamp is enabled in any port, the hardware is configured to update the correction field. The fact that the configuration of CPU port affects all the ports, makes the correction field update to be global for all ports. Otherwise, user will see odd values in the correction field, as the switch will update the correction field in the CPU port, but not in all the front-panel ports. The CPU port is relevant in both RX and TX, so to avoid problematic configuration, forbid PTP enablement only in one direction, i.e., only in RX or TX. Without the change: $ hwstamp_ctl -i swp1 -r 12 -t 0 current settings: tx_type 0 rx_filter 0 new settings: tx_type 0 rx_filter 2 $ echo $? 0 With the change: $ hwstamp_ctl -i swp1 -r 12 -t 0 current settings: tx_type 1 rx_filter 2 SIOCSHWTSTAMP failed: Invalid argument Fixes: 08ef8bc8 ("mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Currently the functions mlxsw_sp2_ptp_{configure, deconfigure}_port() assume that they are called when RTNL is locked and they warn otherwise. The deconfigure function can be called when port is removed, for example as part of device reload, then there is no locked RTNL and the function warns [1]. To avoid such case, do not assume that RTNL protects this code, add a dedicated mutex instead. The mutex protects 'ptp_state->config' which stores the existing global configuration in hardware. Use this mutex also to protect the code which configures the hardware. Then, there will be only one configuration in any time, which will be updated in 'ptp_state' and a race will be avoided. [1]: RTNL: assertion failed at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c (1600) WARNING: CPU: 1 PID: 1583493 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1600 mlxsw_sp2_ptp_hwtstamp_set+0x2d3/0x300 [mlxsw_spectrum] [...] CPU: 1 PID: 1583493 Comm: devlink Not tainted5.19.0-rc8-custom-127022-gb371dffda095 #789 Hardware name: Mellanox Technologies Ltd.MSN3420/VMOD0005, BIOS 5.11 01/06/2019 RIP: 0010:mlxsw_sp2_ptp_hwtstamp_set+0x2d3/0x300[mlxsw_spectrum] [...] Call Trace: <TASK> mlxsw_sp_port_remove+0x7e/0x190 [mlxsw_spectrum] mlxsw_sp_fini+0xd1/0x270 [mlxsw_spectrum] mlxsw_core_bus_device_unregister+0x55/0x280 [mlxsw_core] mlxsw_devlink_core_bus_device_reload_down+0x1c/0x30[mlxsw_core] devlink_reload+0x1ee/0x230 devlink_nl_cmd_reload+0x4de/0x580 genl_family_rcv_msg_doit+0xdc/0x140 genl_rcv_msg+0xd7/0x1d0 netlink_rcv_skb+0x49/0xf0 genl_rcv+0x1f/0x30 netlink_unicast+0x22f/0x350 netlink_sendmsg+0x208/0x440 __sys_sendto+0xf0/0x140 __x64_sys_sendto+0x1b/0x20 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 08ef8bc8 ("mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Reported-by:Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Currently as part of removing port, PTP API is called to clear the existing configuration and set the 'rx_filter' and 'tx_type' to zero. The clearing is done before unregistering the netdevice, which means that there is a window of time in which the user can reconfigure PTP in the port, and this configuration will not be cleared. Reorder the operations, clear PTP configuration after unregistering the netdevice. Fixes: 87486427 ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by:
-
Amit Cohen authored
In case that 'CONFIG_PTP_1588_CLOCK' is not enabled in the config file, there are implementations for the functions mlxsw_{sp,sp2}_ptp_txhdr_construct() as part of 'spectrum_ptp.h'. In this case, they should be defined as 'static' as they are not supposed to be used out of this file. Make the functions 'static', otherwise the following warnings are returned: "warning: no previous prototype for 'mlxsw_sp_ptp_txhdr_construct'" "warning: no previous prototype for 'mlxsw_sp2_ptp_txhdr_construct'" In addition, make the functions 'inline' for case that 'spectrum_ptp.h' will be included anywhere else and the functions would probably not be used, so compilation warnings about unused static will be returned. Fixes: 24157bc6 ("mlxsw: Send PTP packets as data packets to overcome a limitation") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
-
Jamal Hadi Salim authored
Follows up on: https://lore.kernel.org/all/20220809170518.164662-1-cascardo@canonical.com/ handle of 0 implies from/to of universe realm which is not very sensible. Lets see what this patch will do: $sudo tc qdisc add dev $DEV root handle 1:0 prio //lets manufacture a way to insert handle of 0 $sudo tc filter add dev $DEV parent 1:0 protocol ip prio 100 \ route to 0 from 0 classid 1:10 action ok //gets rejected... Error: handle of 0 is not valid. We have an error talking to the kernel, -1 //lets create a legit entry.. sudo tc filter add dev $DEV parent 1:0 protocol ip prio 100 route from 10 \ classid 1:10 action ok //what did the kernel insert? $sudo tc filter ls dev $DEV parent 1:0 filter protocol ip pref 100 route chain 0 filter protocol ip pref 100 route chain 0 fh 0x000a8000 flowid 1:10 from 10 action order 1: gact action pass random type none pass val 0 index 1 ref 1 bind 1 //Lets try to replace that legit entry with a handle of 0 $ sudo tc filter replace dev $DEV parent 1:0 protocol ip prio 100 \ handle 0x000a8000 route to 0 from 0 classid 1:10 action drop Error: Replacing with handle of 0 is invalid. We have an error talking to the kernel, -1 And last, lets run Cascardo's POC: $ ./poc 0 0 -22 -22 -22 Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Xin Xiong authored
The issue happens on specific paths in the function. After both the object `rt` and `neigh` are grabbed successfully, when `lifetime` is nonzero but the metric needs change, the function just deletes the route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh` again if above conditions hold. The function simply overwrite `neigh` if succeeds or returns if fails, without decreasing the reference count of previous `neigh`. This may result in memory leaks. Fix it by decrementing the reference count of `neigh` in place. Fixes: 6b2e04bc ("net: allow user to set metric on default route learned via Router Advertisement") Signed-off-by:
Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
-
