- 23 Mar, 2022 34 commits
-
-
Alexandre Belloni authored
Switch to devm_rtc_allocate_device/devm_rtc_register_device, this allows for further improvement of the driver. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220309162301.61679-23-alexandre.belloni@bootlin.com
-
Alexandre Belloni authored
Some RTCs have an IRQ pin that is not connected to a CPU interrupt but rather directly to a PMIC or power supply. In that case, it is still useful to be able to set alarms but we shouldn't expect interrupts. Signed-off-by:
-
Alexandre Belloni authored
The reference manual doesn't specify whether the registers are latched and they probably aren't, ensure the read time and date are consistent. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20220309162301.61679-21-alexandre.belloni@bootlin.com
-
Alexandre Belloni authored
Since commitc9f5c7e7 ("rtc: rtc-spear: Provide flag for no support of UIE mode") which was in 2012, the core changed a lot and UIE are now supported using regular alarms. Drop uie_unsupported now to reflect that. Signed-off-by:
-
Alexandre Belloni authored
While the RTC can store dates from year 0000 to 9999, leap years where not tested fro 2100. The driver currently stores tm_year directly which will probably fail at that time or more probably in 2300. Signed-off-by:
-
Alexandre Belloni authored
Switch to devm_rtc_allocate_device/devm_rtc_register_device, this allows for further improvement of the driver. Signed-off-by:
-
Alexandre Belloni authored
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. Signed-off-by:
-
Alexandre Belloni authored
Set RTC_FEATURE_ALARM_RES_MINUTE, so the core knows alarms have a resolution of a minute. Also, the core will properly round down the alarm instead of up. Signed-off-by:
-
Alexandre Belloni authored
Set RTC_FEATURE_ALARM_RES_MINUTE, so the core knows alarms have a resolution of a minute. Also, the core will properly round down the alarm instead of up. Signed-off-by:
-
Alexandre Belloni authored
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. Signed-off-by:
-
Alexandre Belloni authored
The PCF85063 doesn't support UIE because setting an alarm to fire every second confuses the chip and the fastest we can go is an alarm every 2 seconds. Signed-off-by:
-
Alexandre Belloni authored
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. Signed-off-by:
-
Alexandre Belloni authored
The PCF2127 doesn't support UIE because setting an alarm to fire every second confuses the chip and the fastest we can go is an alarm every 2 seconds. Signed-off-by:
-
Alexandre Belloni authored
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. Signed-off-by:
-
Alexandre Belloni authored
Alarms have a resolution of a minute. Signed-off-by:
-
Alexandre Belloni authored
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. Signed-off-by:
-
Alexandre Belloni authored
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. Signed-off-by:
-
Alexandre Belloni authored
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. Signed-off-by:
-
Alexandre Belloni authored
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. Signed-off-by:
-
Alexandre Belloni authored
Set RTC_FEATURE_ALARM_RES_MINUTE, so the core knows alarms have a resolution of a minute. Also, the core will properly round down the alarm instead of up. Signed-off-by:
-
Alexandre Belloni authored
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. Signed-off-by:
-
Alexandre Belloni authored
No platforms are currently setting no_irq. Anyway, letting platform_get_irq fail is fine as this means that there is no IRQ. In that case, clear RTC_FEATURE_ALARM so the core knows there are no alarms. Signed-off-by:
-
Alexandre Belloni authored
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead. There is currently a missing information as to why this is not supported on ioc3. Signed-off-by:
-
Samuel Holland authored
H6 supports IOSC calibration and an ext-osc32k input. Unlike newer SoCs, it has a single parent for its fanout clock. Add support for H6 in the CCU driver, replacing the support in the existing early OF clock provider. Signed-off-by:
Samuel Holland <samuel@sholland.org> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Samuel Holland authored
The RTC power domain in sun6i and newer SoCs manages the 16 MHz RC oscillator (called "IOSC" or "osc16M") and the optional 32 kHz crystal oscillator (called "LOSC" or "osc32k"). Starting with the H6, this power domain also handles the 24 MHz DCXO (called variously "HOSC", "dcxo24M", or "osc24M") as well. The H6 also adds a calibration circuit for IOSC. Later SoCs introduce further variations on the design: - H616 adds an additional mux for the 32 kHz fanout source. - R329 adds an additional mux for the RTC timekeeping clock, a clock for the SPI bus between power domains inside the RTC, and removes the IOSC calibration functionality. Take advantage of the CCU framework to handle this increased complexity. This driver is intended to be a drop-in replacement for the existing RTC clock provider. So some runtime adjustment of the clock parents is needed, both to handle hardware differences, and to support the old binding which omitted some of the input clocks. Signed-off-by:
-
Samuel Holland authored
The muxes in the RTC can only be updated when setting a key field to a specific value. Add a feature flag to denote muxes with this property. Since so far the key value is always the same, it does not need to be provided separately for each mux. Signed-off-by:
-
Jiasheng Jiang authored
As the potential failure of the wm8350_register_irq(), it should be better to check it and return error if fails. Also, it need not free 'wm_rtc->rtc' since it will be freed automatically. Fixes: 077eaf5b ("rtc: rtc-wm8350: add support for WM8350 RTC") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Andre Przywara authored
The H616 RTC changes its day storage to the newly introduced linear day scheme, so pair the new compatible string with this feature flag. The RTC clock parts are handled in a separate driver now, so we skip the clock parts in this driver completely. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
-
Andre Przywara authored
Newer versions of the Allwinner RTC, for instance as found in the H616 SoC, not only store the current day as a linear number, but also change the way the alarm is handled: There are now two registers, that explicitly store the wakeup time, in the same format as the current time. Add support for that variant by writing the requested wakeup time directly into the registers, instead of programming the seconds left, as the old SoCs required. Reviewed by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Andre Przywara authored
Newer versions of the Allwinner RTC, as for instance found in the H616 SoC, no longer store a broken-down day/month/year representation in the RTC_DAY_REG, but just a linear day number. The user manual does not give any indication about the expected epoch time of this day count, but the BSP kernel uses the UNIX epoch, which allows easy support due to existing conversion functions in the kernel. Allow tagging a compatible string with a flag, and use that to mark those new RTCs. Then convert between a UNIX day number (converted into seconds) and the broken-down day representation using mktime64() and time64_to_tm() in the set_time/get_time functions. That enables support for the RTC in those new chips. Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Andre Przywara authored
Using "unsigned long" for UNIX timestamps is never a good idea, and comparing the value of such a variable against U32_MAX does not do anything useful on 32-bit systems. Use the proper time64_t type when dealing with timestamps, and avoid cutting down the time range unnecessarily. This also fixes the flawed check for the alarm time being too far into the future. The check for this condition is actually somewhat theoretical, as the RTC counts till 2033 only anyways, and 2^32 seconds from now is not before the year 2157 - at which point I hope nobody will be using this hardware anymore. Signed-off-by:
-
Ali Pouladi authored
When there is no interrupt line, rtc alarm feature is disabled. The clearing of the alarm feature bit was being done prior to allocations of ldata->rtc device, resulting in a null pointer dereference. Clear RTC_FEATURE_ALARM after the rtc device is allocated. Fixes: d9b0dd54 ("rtc: pl031: use RTC_FEATURE_ALARM") Cc: stable@vger.kernel.org Signed-off-by:
Ali Pouladi <quic_apouladi@quicinc.com> Signed-off-by:
Elliot Berman <quic_eberman@quicinc.com> Signed-off-by:
-
Mateusz Jończyk authored
In mc146818_set_time(), CMOS_READ(RTC_CONTROL) was performed without the rtc_lock taken, which is required for CMOS accesses. Fix this. Nothing in kernel modifies RTC_DM_BINARY, so a separate critical section is allowed here. Fixes: dcf257e9 ("rtc: mc146818: Reduce spinlock section in mc146818_set_time()") Signed-off-by:
Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Alexandre Belloni authored
atmel,at91sam9-rtc is a confusing name for this file as it is documenting the RTT used as an RTC and not the other regular RTC (atmel,at91rm9200-rtc and atmel,at91sam9x5-rtc) Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220308155735.54146-1-alexandre.belloni@bootlin.com
-
- 08 Mar, 2022 2 commits
-
-
Sergiu Moga authored
Add compatible strings list for SAMA7G5. Signed-off-by:
Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Sergiu Moga authored
Convert RTC binding for Atmel/Microchip SoCs to Device Tree Schema format. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 15 Feb, 2022 4 commits
-
-
Hugo Villeneuve authored
The first bug is that reading the 5 alarm registers results in a read operation of 20 bytes. The reason is because the destination buffer is defined as an array of "unsigned int", and we use the sizeof() operator on this array to define the bulk read count. The second bug is that the read value is invalid, because we are indexing the destination buffer as integers (4 bytes), instead of indexing it as u8. Changing the destination buffer type to u8 fixes both problems. Signed-off-by:
Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by:
-
Hugo Villeneuve authored
If the interrupt pin of the PCF2127 is routed to the input of a GPIO expander using the pca953x driver, the later will only accept an IRQ of type IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_RISING, and the IRQ request will fail. Therefore, allow the IRQ type to be passed from the device tree data if available. Signed-off-by:
-
Victor Erminpour authored
When building with automatic stack variable initialization, GCC 12 complains about variables defined outside of switch case statements. Move variables outside the switch, which silences warnings: ./drivers/rtc/rtc-pcf8523.c:284:20: error: statement will never be executed [-Werror=switch-unreachable] 284 | u8 mode; | ./drivers/rtc/rtc-pcf8523.c:245:21: error: statement will never be executed [-Werror=switch-unreachable] 245 | u32 value; | ^~~~~ Signed-off-by:Victor Erminpour <victor.erminpour@oracle.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Samuel Holland authored
H6 and newer variants of the RTC hardware have a bus clock gate in the PRCM CCU. This was not known at the time H6 support was added, so it was not included in the H6 RTC binding, nor in the H6 PRCM CCU driver. Now that this clock gate is documented, it is included in the A100 and D1 PRCM CCU drivers. Therefore, the RTC driver needs to have a consumer for the clock gate to prevent Linux from disabling it. Patch-changes: 3 - New patch for compatibility with new CCU drivers Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
