The matches() routine for a capability must honor the "scope"
passed to it and return the proper results.
i.e, when passed with SCOPE_LOCAL_CPU, it should check the
status of the capability on the current CPU. This is used by
verify_local_cpu_capabilities() on a late secondary CPU to make
sure that it's compliant with the established system features.
However, ARM64_HAS_CACHE_{IDC/DIC} always checks the system wide
registers and this could mean that a late secondary CPU could return
"true" (since the CPU hasn't updated the system wide registers yet)
and thus lead the system in an inconsistent state, where
the system assumes it has IDC/DIC feature, while the new CPU
doesn't.

Fixes: commit 6ae4b6e0 ("arm64: Add support for new control bits CTR_EL0.DIC and CTR_EL0.IDC")
Cc: Philip Elcan <pelcan@codeaurora.org>
Cc: Shanker Donthineni <shankerd@codeaurora.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Arm v8 architecture supports multiple page sizes - 4k, 16k and
64k. Based on the active page size, the Linux port supports
corresponding hugepage sizes at PMD and PUD(4k only) levels.

In addition, the architecture also supports caching larger sized
ranges (composed of multiple entries) at the PTE and PMD level in the
TLBs using the contiguous bit. The Linux port makes use of this
architectural support to enable additional hugepage sizes.

Describe the two different types of hugepages supported by the arm64
kernel and the hugepage sizes enabled by each.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

commit 2330b7ca ("arm64/mm: use fixmap to modify
swapper_pg_dir") modifies the swapper_pg_dir via the fixmap
as the kernel page tables have been moved to a read-only
part of the kernel mapping.

Using __pa() to setup the fixmap causes CONFIG_DEBUG_VIRTUAL
to fire, as this function is used on the kernel-image swapper
address. The in_swapper_pgdir() test before each call of this
function means set_swapper_pgd() will only ever be called when
pgdp points somewhere in the kernel-image mapping of
swapper_pd_dir. Use __pa_symbol().
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Jun Yao <yaojun8558363@gmail.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Document that we actually work around ARM erratum 1188873

Fixes: 95b861a4 ("arm64: arch_timer: Add workaround for ARM erratum 1188873")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This reverts commit a1f33941.

The unsafe accessors allow the PAN enable/disable calls to be made
once for a group of accesses. Adding these means we can now have
sequences that look like this:

| user_access_begin();
| unsafe_put_user(static-value, x, err);
| unsafe_put_user(helper-that-sleeps(), x, err);
| user_access_end();

Calling schedule() without taking an exception doesn't switch the
PSTATE or TTBRs. We can switch out of a uaccess-enabled region, and
run other code with uaccess enabled for a different thread.

We can also switch from uaccess-disabled code back into this region,
meaning the unsafe_put_user()s will fault.

For software-PAN, threads that do this will get stuck as
handle_mm_fault() will determine the page has already been mapped in,
but we fault again as the page tables aren't loaded.

To solve this we need code in __switch_to() that save/restores the
PAN state.
Acked-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Cpu parameter is never used in flush_context, remove it.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The SDEI header files had an 'arm_' namespace added, but the patterns
in the MAINTAINERS files were missed. Oops.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

__is_defined(__PAGETABLE_P?D_FOLDED) doesn't quite work as intended
as these symbols are internal to asm-generic and aren't defined in the
way kconfig expects. This makes them always evaluate to false.
Switch to #ifdef.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

"bellow" -> "below"

The recommendation from kegel.com/kerspell is to only fix the howlers.
"Bellow" is a synonym of "howl" so this should be appropriate.
Signed-off-by: Kyrylo Tkachov <kyrylo.tkachov@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The status of interrupts might depend on more than just pstate. Use
interrupts_disabled() instead of raw_irqs_disabled_flags() to take the full
context into account.
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

For EL0 entries requiring bp_hardening, daif status is kept at
DAIF_PROCCTX_NOIRQ until after hardening has been done. Then interrupts
are enabled through local_irq_enable().

Before using local_irq_* functions, daifflags should be properly restored
to a state where IRQs are enabled.

Enable IRQs by restoring DAIF_PROCCTX state after bp hardening.
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Some of the work done in daifflags save/restore is already provided
by irqflags functions. Daifflags should always be a superset of irqflags
(it handles irq status + status of other flags). Modifying behaviour of
irqflags should alter the behaviour of daifflags.

Use irqflags_save/restore functions for the corresponding daifflags
operation.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64_1188873_read_cntvct_el0() is protected by the correct
CONFIG_ARM64_ERRATUM_1188873 #ifdef, but the only reference to it is
also inside of an CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND section,
and causes a warning if that is disabled:

drivers/clocksource/arm_arch_timer.c:323:20: error: 'arm64_1188873_read_cntvct_el0' defined but not used [-Werror=unused-function]

Since the erratum requires that we always apply the workaround
in the timer driver, select that symbol as we do for SoC
specific errata.

Fixes: 95b861a4 ("arm64: arch_timer: Add workaround for ARM erratum 1188873")
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

It recently came to light that userspace can execute WFI, and that
the arm64 kernel doesn't trap this event. This sounds rather benign,
but the kernel should decide when it wants to wait for an interrupt,
and not userspace.

Let's trap WFI and immediately return after having skipped the
instruction. This effectively makes WFI a rather expensive NOP.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We advertise the MRS/MSR instructions for toggling SSBS at EL0 using an
HWCAP, so document it along with the others.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Fix some typos in our hwcap documentation, where we refer to the wrong
ID register for some of the capabilities.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
[will: fix amusing binary constants]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

There is an extra semicolon in arch_prepare_kprobe, remove it.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

At present numa_free_distance() is being called before numa_distance is
even initialized with numa_alloc_distance() which is really pointless.
Instead lets call numa_free_distance() on the common error path inside
numa_init() after numa_alloc_distance() has been successful.

Fixes: 1a2db300 ("arm64, numa: Add NUMA support for arm64 platforms")
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The dummy node ID is marked into all memory ranges on the system. So the
dummy node really extends the entire memblock.memory. Hence report correct
extent information for the dummy node using memblock range helper functions
instead of the range [0LLU, PFN_PHYS(max_pfn) - 1)].

Fixes: 1a2db300 ("arm64, numa: Add NUMA support for arm64 platforms")
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

fault_info[] and debug_fault_info[] are static arrays defining memory abort
exception handling functions looking into ESR fault status code encodings.
As esr_to_fault_info() is already available providing fault_info[] array
lookup, it really makes sense to have a corresponding debug_fault_info[]
array lookup function as well. This just adds an equivalent helper function
esr_to_debug_fault_info().
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Most memory abort exception handling related functions have the arguments
in the order (addr, esr, regs) except is_el1_permission_fault(). This
changes the argument order in this function as (addr, esr, regs) like
others.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Just replace hard code value of 63 (0x111111) with an existing macro
ESR_ELx_FSC when parsing for the status code during fault exception.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

When running on Cortex-A76, a timer access from an AArch32 EL0
task may end up with a corrupted value or register. The workaround for
this is to trap these accesses at EL1/EL2 and execute them there.

This only affects versions r0p0, r1p0 and r2p0 of the CPU.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Just like CNTVCT, we need to handle userspace trapping into the
kernel if we're decided that the timer wasn't fit for purpose...
64bit userspace is already dealt with, but we're missing the
equivalent compat handling.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Since people seem to make a point in breaking the userspace visible
counter, we have no choice but to trap the access. We already do this
for 64bit userspace, but this is lacking for compat. Let's provide
the required handler.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We're now ready to start handling CP15 access. Let's add (empty)
arrays for both 32 and 64bit accessors, and the code that deals
with them.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Here's a /really nice/ part of the architecture: a CP15 access is
allowed to trap even if it fails its condition check, and SW must
handle it. This includes decoding the IT state if this happens in
am IT block. As a consequence, SW must also deal with advancing
the IT state machine.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Instead of directly generating an UNDEF when trapping a CP15 access,
let's add a new entry point to that effect (which only generates an
UNDEF for now).
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

So far, we don't have anything to help decoding ESR_ELx when dealing
with ESR_ELx_EC_CP15_{32,64}. As we're about to handle some of those,
let's add some useful macros.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64 does not define CONFIG_HAVE_ARCH_COMPILER_H, nor does it keep
anything useful in its copy of asm/compiler.h, so let's remove it
before anybody starts using it.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arch/arm/ defines a SIGMINSTKSZ of 2k, so we should use the same value
for compat tasks.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reported-by: Steve McIntyre <steve.mcintyre@arm.com>
Tested-by: Steve McIntyre <93sam@debian.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The sigaltstack(2) system call fails with -ENOMEM if the new alternative
signal stack is found to be smaller than SIGMINSTKSZ. On architectures
such as arm64, where the native value for SIGMINSTKSZ is larger than
the compat value, this can result in an unexpected error being reported
to a compat task. See, for example:

  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385

This patch fixes the problem by extending do_sigaltstack to take the
minimum signal stack size as an additional parameter, allowing the
native and compat system call entry code to pass in their respective
values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not
been defined by the architecture.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Reported-by: Steve McIntyre <steve.mcintyre@arm.com>
Tested-by: Steve McIntyre <93sam@debian.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Now that deliberate writes to swapper_pg_dir are made via the fixmap, we
can defend against errant writes by moving it into the rodata section.
Since tramp_pg_dir and reserved_ttbr0 must be at a fixed offset from
swapper_pg_dir, and are not modified at runtime, these are also moved
into the rodata section. Likewise, idmap_pg_dir is not modified at
runtime, and is moved into rodata.
Signed-off-by: Jun Yao <yaojun8558363@gmail.com>
Reviewed-by: James Morse <james.morse@arm.com>
[Mark: simplify linker script, commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Once swapper_pg_dir is in the rodata section, it will not be possible to
modify it directly, but we will need to modify it in some cases.

To enable this, we can use the fixmap when deliberately modifying
swapper_pg_dir. As the pgd is only transiently mapped, this provides
some resilience against illicit modification of the pgd, e.g. for
Kernel Space Mirror Attack (KSMA).
Signed-off-by: Jun Yao <yaojun8558363@gmail.com>
Reviewed-by: James Morse <james.morse@arm.com>
[Mark: simplify ifdeffery, commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Since the address of swapper_pg_dir is fixed for a given kernel image,
it is an attractive target for manipulation via an arbitrary write. To
mitigate this we'd like to make it read-only by moving it into the
rodata section.

We require that swapper_pg_dir is at a fixed offset from tramp_pg_dir
and reserved_ttbr0, so these will also need to move into rodata.
However, swapper_pg_dir is allocated along with some transient page
tables used for boot which we do not want to move into rodata.

As a step towards this, this patch separates the boot-time page tables
into a new init_pg_dir, and reduces swapper_pg_dir to the single page it
needs to be. This allows us to retain the relationship between
swapper_pg_dir, tramp_pg_dir, and swapper_pg_dir, while cleanly
separating these from the boot-time page tables.

The init_pg_dir holds all of the pgd/pud/pmd/pte levels needed during
boot, and all of these levels will be freed when we switch to the
swapper_pg_dir, which is initialized by the existing code in
paging_init(). Since we start off on the init_pg_dir, we no longer need
to allocate a transient page table in paging_init() in order to ensure
that swapper_pg_dir isn't live while we initialize it.

There should be no functional change as a result of this patch.
Signed-off-by: Jun Yao <yaojun8558363@gmail.com>
Reviewed-by: James Morse <james.morse@arm.com>
[Mark: place init_pg_dir after BSS, fold mm changes, commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

In subsequent patches we'll use a transient pgd during the primary cpu's
boot process. To make this work while allowing secondary cpus to use the
swapper_pg_dir, we need to pass the relevant TTBR1 pgd as a parameter
to __enable_mmu().

This patch updates __enable__mmu() to take this as a parameter, updating
callsites to pass swapper_pg_dir for now.

There should be no functional change as a result of this patch.
Signed-off-by: Jun Yao <yaojun8558363@gmail.com>
Reviewed-by: James Morse <james.morse@arm.com>
[Mark: simplify assembly, clarify commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

x0 is not callee-saved in the PCS. So there is no need to specify
-fcall-used-x0.

Clang doesn't currently support -fcall-used flags. This patch will help
building the kernel with clang.
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Tri Vo <trong@android.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Support for VGA_CONSOLE is not allowable due to commit ee23794b
("video: vgacon: Don't build on arm64"), thus remove the associated
unused code.

Whilst PCI on arm64 would support VGA a valid screen_info structure
is missing.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

include/linux/mmzone.h describes ARCH_HAS_HOLES_MEMORYMODEL as
relevant when parts the memmap have been free()d. This would
happen on systems where memory is smaller than a sparsemem-section,
and the extra struct pages are expensive. pfn_valid() on these
systems returns true for the whole sparsemem-section, so an extra
memmap_valid_within() check is needed.

On arm64 we have nomap memory, so always provide pfn_valid() to test
for nomap pages. This means ARCH_HAS_HOLES_MEMORYMODEL's extra checks
are already rolled up into pfn_valid().

Remove it.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>