- 03 Jul, 2018 11 commits
-
-
Eric W. Biederman authored
commit 7de712cc upstream. While working on changing this code to use force_sig_fault I discovered that do_unaliged_user is sets si_signo to SIGBUS and passes SIGSEGV to force_sig_info. Which is just b0rked. The code is reporting a SIGBUS error so replace the SIGSEGV with SIGBUS. Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-xtensa@linux-xtensa.org Cc: stable@vger.kernel.org Acked-by: Max Filippov <jcmvbkbc@gmail.com> Fixes: 5a0015d6 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 3") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Wagner authored
commit 8afb1d2c upstream. Commit 40f70c03 ("serial: sh-sci: add locking to console write function to avoid SMP lockup") copied the strategy to avoid locking problems in conjuncture with the console from the UART8250 driver. Instead using directly spin_{try}lock_irqsave(), local_irq_save() followed by spin_{try}lock() was used. While this is correct on mainline, for -rt it is a problem. spin_{try}lock() will check if it is running in a valid context. Since the local_irq_save() has already been executed, the context has changed and spin_{try}lock() will complain. The reason why spin_{try}lock() complains is that on -rt the spin locks are turned into mutexes and therefore can sleep. Sleeping with interrupts disabled is not valid. BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995 in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0 CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12 Hardware name: Generic RZ/G1 (Flattened Device Tree) Backtrace: [<c00140a0>] (dump_backtrace) from [<c001424c>] (show_stack+0x18/0x1c) r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0 [<c0014234>] (show_stack) from [<c01d3c94>] (dump_stack+0x78/0x94) [<c01d3c1c>] (dump_stack) from [<c004c134>] (___might_sleep+0x134/0x194) r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000 [<c004c000>] (___might_sleep) from [<c04ded60>] (rt_spin_lock+0x20/0x74) r5:c06f4d60 r4:c06f4d60 [<c04ded40>] (rt_spin_lock) from [<c02577e4>] (serial_console_write+0x100/0x118) r5:c06f4d60 r4:c06f4d60 [<c02576e4>] (serial_console_write) from [<c0061060>] (call_console_drivers.constprop.15+0x10c/0x124) r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798 r4:c06b9914 r3:c02576e4 [<c0060f54>] (call_console_drivers.constprop.15) from [<c0062984>] (console_unlock+0x32c/0x430) r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798 r4:c06d2798 r3:00000028 [<c0062658>] (console_unlock) from [<c0062e1c>] (vprintk_emit+0x394/0x4f0) r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027 r4:00000003 [<c0062a88>] (vprintk_emit) from [<c0062fa0>] (vprintk+0x28/0x30) r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c r4:c0062fa8 [<c0062f78>] (vprintk) from [<c0062fb8>] (vprintk_default+0x10/0x14) [<c0062fa8>] (vprintk_default) from [<c009cd30>] (printk+0x78/0x84) [<c009ccbc>] (printk) from [<c025afdc>] (credit_entropy_bits+0x17c/0x2cc) r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523 r4:00000006 [<c025ae60>] (credit_entropy_bits) from [<c025bf74>] (add_interrupt_randomness+0x160/0x178) r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c r4:dfbcf680 [<c025be14>] (add_interrupt_randomness) from [<c006536c>] (irq_thread+0x1e8/0x248) r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000 r4:df525180 [<c0065184>] (irq_thread) from [<c003fba4>] (kthread+0x108/0x11c) r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00 r4:decac000 [<c003fa9c>] (kthread) from [<c00101b8>] (ret_from_fork+0x14/0x3c) r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00 Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Finn Thain authored
commit 3e2816c1 upstream. The resource size is 0x2000 == end - start + 1. Therefore end == start + 0x2000 - 1. Cc: Laurent Vivier <lvivier@redhat.com> Cc: stable@vger.kernel.org # v4.14+ Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Schmitz authored
commit 3f90f9ef upstream. If 020/030 support is enabled, get_io_area() leaves an IO_SIZE gap between mappings which is added to the vm_struct representing the mapping. __ioremap() uses the actual requested size (after alignment), while __iounmap() is passed the size from the vm_struct. On 020/030, early termination descriptors are used to set up mappings of extent 'size', which are validated on unmapping. The unmapped gap of size IO_SIZE defeats the sanity check of the pmd tables, causing __iounmap() to loop forever on 030. On 040/060, unmapping of page table entries does not check for a valid mapping, so the umapping loop always completes there. Adjust size to be unmapped by the gap that had been added in the vm_struct prior. This fixes the hang in atari_platform_init() reported a long time ago, and a similar one reported by Finn recently (addressed by removing ioremap() use from the SWIM driver. Tested on my Falcon in 030 mode - untested but should work the same on 040/060 (the extra page tables cleared there would never have been set up anyway). Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> [geert: Minor commit description improvements] [geert: This was fixed in 2.4.23, but not in 2.5.x] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Siarhei Liakh authored
commit 3ae6295c upstream. fpu__drop() has an explicit fwait which under some conditions can trigger a fixable FPU exception while in kernel. Thus, we should attempt to fixup the exception first, and only call notify_die() if the fixup failed just like in do_general_protection(). The original call sequence incorrectly triggers KDB entry on debug kernels under particular FPU-intensive workloads. Andy noted, that this makes the whole conditional irq enable thing even more inconsistent, but fixing that it outside the scope of this. Signed-off-by: Siarhei Liakh <siarhei.liakh@concurrent-rt.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Borislav Petkov" <bpetkov@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/DM5PR11MB201156F1CAB2592B07C79A03B17D0@DM5PR11MB2011.namprd11.prod.outlook.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov authored
commit 1f74c8a6 upstream. mce_no_way_out() does a quick check during #MC to see whether some of the MCEs logged would require the kernel to panic immediately. And it passes a struct mce where MCi_STATUS gets written. However, after having saved a valid status value, the next iteration of the loop which goes over the MCA banks on the CPU, overwrites the valid status value because we're using struct mce as storage instead of a temporary variable. Which leads to MCE records with an empty status value: mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0: 0000000000000000 mce: [Hardware Error]: RIP 10:<ffffffffbd42fbd7> {trigger_mce+0x7/0x10} In order to prevent the loss of the status register value, return immediately when severity is a panic one so that we can panic immediately with the first fatal MCE logged. This is also the intention of this function and not to noodle over the banks while a fatal MCE is already logged. Tony: read the rest of the MCA bank to populate the struct mce fully. Suggested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180622095428.626-8-bp@alien8.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Luck authored
commit 40c36e27 upstream. Some injection testing resulted in the following console log: mce: [Hardware Error]: CPU 22: Machine Check Exception: f Bank 1: bd80000000100134 mce: [Hardware Error]: RIP 10:<ffffffffc05292dd> {pmem_do_bvec+0x11d/0x330 [nd_pmem]} mce: [Hardware Error]: TSC c51a63035d52 ADDR 3234bc4000 MISC 88 mce: [Hardware Error]: PROCESSOR 0:50654 TIME 1526502199 SOCKET 0 APIC 38 microcode 2000043 mce: [Hardware Error]: Run the above through 'mcelog --ascii' Kernel panic - not syncing: Machine check from unknown source This confused everybody because the first line quite clearly shows that we found a logged error in "Bank 1", while the last line says "unknown source". The problem is that the Linux code doesn't do the right thing for a local machine check that results in a fatal error. It turns out that we know very early in the handler whether the machine check is fatal. The call to mce_no_way_out() has checked all the banks for the CPU that took the local machine check. If it says we must crash, we can do so right away with the right messages. We do scan all the banks again. This means that we might initially not see a problem, but during the second scan find something fatal. If this happens we print a slightly different message (so I can see if it actually every happens). [ bp: Remove unneeded severity assignment. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org # 4.2 Link: http://lkml.kernel.org/r/52e049a497e86fd0b71c529651def8871c804df0.1527283897.git.tony.luck@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Luck authored
commit 4c5717da upstream. Currently we just check the "CAPID0" register to see whether the CPU can recover from machine checks. But there are also some special SKUs which do not have all advanced RAS features, but do enable machine check recovery for use with NVDIMMs. Add a check for any of bits {8:5} in the "CAPID5" register (each reports some NVDIMM mode available, if any of them are set, then the system supports memory machine check recovery). Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org # 4.9 Cc: Dan Williams <dan.j.williams@intel.com> Cc: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/03cbed6e99ddafb51c2eadf9a3b7c8d7a0cc204e.1527283897.git.tony.luck@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Luck authored
commit c7d606f5 upstream. Since we added support to add recovery from some errors inside the kernel in: commit b2f9d678 ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries") we have done a less than stellar job at reporting the cause of recoverable machine checks that occur in other parts of the kernel. The user just gets the unhelpful message: mce: [Hardware Error]: Machine check: Action required: unknown MCACOD doubly unhelpful when they check the manual for the reported IA32_MSR_STATUS.MCACOD and see that it is listed as one of the standard recoverable values. Add an extra rule to the MCE severity table to catch this case and report it as: mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel Fixes: b2f9d678 ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries") Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org # 4.6+ Cc: Dan Williams <dan.j.williams@intel.com> Cc: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/4cc7c465150a9a48b8b9f45d0b840278e77eb9b5.1527283897.git.tony.luck@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Juergen Gross authored
commit 74899d92 upstream. Commit: 1f50ddb4 ("x86/speculation: Handle HT correctly on AMD") ... added speculative_store_bypass_ht_init() to the per-CPU initialization sequence. speculative_store_bypass_ht_init() needs to be called on each CPU for PV guests, too. Reported-by: Brian Woods <brian.woods@amd.com> Tested-by: Brian Woods <brian.woods@amd.com> Signed-off-by: Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: xen-devel@lists.xenproject.org Fixes: 1f50ddb4 ("x86/speculation: Handle HT correctly on AMD") Link: https://lore.kernel.org/lkml/20180621084331.21228-1-jgross@suse.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Williams authored
commit eab6870f upstream. Mark Rutland noticed that GCC optimization passes have the potential to elide necessary invocations of the array_index_mask_nospec() instruction sequence, so mark the asm() volatile. Mark explains: "The volatile will inhibit *some* cases where the compiler could lift the array_index_nospec() call out of a branch, e.g. where there are multiple invocations of array_index_nospec() with the same arguments: if (idx < foo) { idx1 = array_idx_nospec(idx, foo) do_something(idx1); } < some other code > if (idx < foo) { idx2 = array_idx_nospec(idx, foo); do_something_else(idx2); } ... since the compiler can determine that the two invocations yield the same result, and reuse the first result (likely the same register as idx was in originally) for the second branch, effectively re-writing the above as: if (idx < foo) { idx = array_idx_nospec(idx, foo); do_something(idx); } < some other code > if (idx < foo) { do_something_else(idx); } ... if we don't take the first branch, then speculatively take the second, we lose the nospec protection. There's more info on volatile asm in the GCC docs: https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile " Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: babdde26 ("x86: Implement array_index_mask_nospec") Link: https://lkml.kernel.org/lkml/152838798950.14521.4893346294059739135.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 Jun, 2018 29 commits
-
-
Greg Kroah-Hartman authored
-
Vlastimil Babka authored
commit 7810e678 upstream. In __alloc_pages_slowpath() we reset zonelist and preferred_zoneref for allocations that can ignore memory policies. The zonelist is obtained from current CPU's node. This is a problem for __GFP_THISNODE allocations that want to allocate on a different node, e.g. because the allocating thread has been migrated to a different CPU. This has been observed to break SLAB in our 4.4-based kernel, because there it relies on __GFP_THISNODE working as intended. If a slab page is put on wrong node's list, then further list manipulations may corrupt the list because page_to_nid() is used to determine which node's list_lock should be locked and thus we may take a wrong lock and race. Current SLAB implementation seems to be immune by luck thanks to commit 511e3a05 ("mm/slab: make cache_grow() handle the page allocated on arbitrary node") but there may be others assuming that __GFP_THISNODE works as promised. We can fix it by simply removing the zonelist reset completely. There is actually no reason to reset it, because memory policies and cpusets don't affect the zonelist choice in the first place. This was different when commit 183f6371 ("mm: ignore mempolicies when using ALLOC_NO_WATERMARK") introduced the code, as mempolicies provided their own restricted zonelists. We might consider this for 4.17 although I don't know if there's anything currently broken. SLAB is currently not affected, but in kernels older than 4.7 that don't yet have 511e3a05 ("mm/slab: make cache_grow() handle the page allocated on arbitrary node") it is. That's at least 4.4 LTS. Older ones I'll have to check. So stable backports should be more important, but will have to be reviewed carefully, as the code went through many changes. BTW I think that also the ac->preferred_zoneref reset is currently useless if we don't also reset ac->nodemask from a mempolicy to NULL first (which we probably should for the OOM victims etc?), but I would leave that for a separate patch. Link: http://lkml.kernel.org/r/20180525130853.13915-1-vbabka@suse.czSigned-off-by: Vlastimil Babka <vbabka@suse.cz> Fixes: 183f6371 ("mm: ignore mempolicies when using ALLOC_NO_WATERMARK") Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thadeu Lima de Souza Cascardo authored
commit 5cc41e09 upstream. WHen registering a new binfmt_misc handler, it is possible to overflow the offset to get a negative value, which might crash the system, or possibly leak kernel data. Here is a crash log when 2500000000 was used as an offset: BUG: unable to handle kernel paging request at ffff989cfd6edca0 IP: load_misc_binary+0x22b/0x470 [binfmt_misc] PGD 1ef3e067 P4D 1ef3e067 PUD 0 Oops: 0000 [#1] SMP NOPTI Modules linked in: binfmt_misc kvm_intel ppdev kvm irqbypass joydev input_leds serio_raw mac_hid parport_pc qemu_fw_cfg parpy CPU: 0 PID: 2499 Comm: bash Not tainted 4.15.0-22-generic #24-Ubuntu Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 RIP: 0010:load_misc_binary+0x22b/0x470 [binfmt_misc] Call Trace: search_binary_handler+0x97/0x1d0 do_execveat_common.isra.34+0x667/0x810 SyS_execve+0x31/0x40 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Use kstrtoint instead of simple_strtoul. It will work as the code already set the delimiter byte to '\0' and we only do it when the field is not empty. Tested with offsets -1, 2500000000, UINT_MAX and INT_MAX. Also tested with examples documented at Documentation/admin-guide/binfmt-misc.rst and other registrations from packages on Ubuntu. Link: http://lkml.kernel.org/r/20180529135648.14254-1-cascardo@canonical.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael S. Tsirkin authored
commit 670ae9ca upstream. struct vhost_msg within struct vhost_msg_node is copied to userspace. Unfortunately it turns out on 64 bit systems vhost_msg has padding after type which gcc doesn't initialize, leaking 4 uninitialized bytes to userspace. This padding also unfortunately means 32 bit users of this interface are broken on a 64 bit kernel which will need to be fixed separately. Fixes: CVE-2018-1118 Cc: stable@vger.kernel.org Reported-by: Kevin Easton <kevin@guarana.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: syzbot+87cfa083e727a224754b@syzkaller.appspotmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Gerecke authored
commit d471b6b2 upstream. The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains a typo which defines an incorrect logical maximum Y value. This causes a small portion of the bottom of the tablet to become unusable (both because the area is below the "bottom" of the tablet and because 'wacom_wac_event' ignores out-of-range values). It also results in a skewed aspect ratio. To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites the data with the correct value. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Even Xu authored
commit ebeaa367 upstream. Current ISH driver only registers suspend/resume PM callbacks which don't support hibernation (suspend to disk). Basically after hiberation, the ISH can't resume properly and user may not see sensor events (for example: screen rotation may not work). User will not see a crash or panic or anything except the following message in log: hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device So this patch adds support for S4/hiberbation to ISH by using the SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend and resume functions will now be used for both suspend to RAM and hibernation. If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend and resume related functions won't be used, so mark them as __maybe_unused to clarify that this is the intended behavior, and remove #ifdefs for power management. Cc: stable@vger.kernel.org Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Brandenburg authored
commit 7f54910f upstream. OrangeFS formerly failed to set attributes_mask with the result that software could not see immutable and append flags present in the filesystem. Reported-by: Becky Ligon <ligon@clemson.edu> Signed-off-by: Martin Brandenburg <martin@omnibond.com> Fixes: 68a24a6c ("orangefs: implement statx") Cc: stable@vger.kernel.org Cc: hubcap@omnibond.com Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Brandenburg authored
commit f6a4b4c9 upstream. As long as a symlink inode remains in-core, the destination (and therefore size) will not be re-fetched from the server, as it cannot change. The original implementation of the attribute cache assumed that setting the expiry time in the past was sufficient to cause a re-fetch of all attributes on the next getattr. That does not work in this case. The bug manifested itself as follows. When the command sequence touch foo; ln -s foo bar; ls -l bar is run, the output was lrwxrwxrwx. 1 fedora fedora 4906 Apr 24 19:10 bar -> foo However, after a re-mount, ls -l bar produces lrwxrwxrwx. 1 fedora fedora 3 Apr 24 19:10 bar -> foo After this commit, even before a re-mount, the output is lrwxrwxrwx. 1 fedora fedora 3 Apr 24 19:10 bar -> foo Reported-by: Becky Ligon <ligon@clemson.edu> Signed-off-by: Martin Brandenburg <martin@omnibond.com> Fixes: 71680c18 ("orangefs: Cache getattr results.") Cc: stable@vger.kernel.org Cc: hubcap@omnibond.com Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luca Coelho authored
commit 9039d985 upstream. The page loading code trusts the data provided in the firmware images a bit too much and may cause a buffer overflow or copy unknown data if the block sizes don't match what we expect. To prevent potential problems, harden the code by checking if the sizes we are copying are what we expect. Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Luck authored
commit 1d9f3e20 upstream. New stepping of Skylake has fixes for cache occupancy and memory bandwidth monitoring. Update the code to enable these by default on newer steppings. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: stable@vger.kernel.org # v4.14 Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Link: https://lkml.kernel.org/r/20180608160732.9842-1-tony.luck@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Potyra authored
commit 955bc613 upstream. According to the API, you may only call clk_get_rate() after actually enabling it. Found by Linux Driver Verification project (linuxtesting.org). Fixes: a5fd9139 ("w1: add 1-wire master driver for i.MX27 / i.MX31") Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 2cfce3a8 upstream. Commit 184add2c ("libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs. This has lead to several reports of users of that SSD where LPM was working fine and who know have a significantly increased idle power consumption on their laptops. Likely there is another problem on the T450s from the original reporter which gets exposed by the uncore reaching deeper sleep states (higher PC-states) due to LPM being enabled. The problem as reported, a hardfreeze about once a day, already did not sound like it would be caused by LPM and the reports of the SSD working fine confirm this. The original reporter is ok with dropping the quirk. A X250 user has reported the same hard freeze problem and for him the problem went away after unrelated updates, I suspect some GPU driver stack changes fixed things. TL;DR: The original reporters problem were triggered by LPM but not an LPM issue, so drop the quirk for the SSD in question. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207 Cc: stable@vger.kernel.org Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Lorenzo Dalrio <lorenzo.dalrio@gmail.com> Reported-by: Lorenzo Dalrio <lorenzo.dalrio@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: "Richard W.M. Jones" <rjones@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit 18c9a99b upstream. We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Fixes: 21334205 ("libata: handle power transition of ODD") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chen Yu authored
commit 75920196 upstream. According to current code implementation, detecting the long idle period is done by checking if the interval between two adjacent utilization update handlers is long enough. Although this mechanism can detect if the idle period is long enough (no utilization hooks invoked during idle period), it might not cover a corner case: if the task has occupied the CPU for too long which causes no context switches during that period, then no utilization handler will be launched until this high prio task is scheduled out. As a result, the idle_periods field might be calculated incorrectly because it regards the 100% load as 0% and makes the conservative governor who uses this field confusing. Change the detection to compare the idle_time with sampling_rate directly. Reported-by: Artem S. Tashkinov <t.artem@mailcity.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tao Wang authored
commit c7d1f119 upstream. If the policy limits are updated via cpufreq_update_policy() and subsequently via sysfs, the limits stored in user_policy may be set incorrectly. For example, if both min and max are set via sysfs to the maximum available frequency, user_policy.min and user_policy.max will also be the maximum. If a policy notifier triggered by cpufreq_update_policy() lowers both the min and the max at this point, that change is not reflected by the user_policy limits, so if the max is updated again via sysfs to the same lower value, then user_policy.max will be lower than user_policy.min which shouldn't happen. In particular, if one of the policy CPUs is then taken offline and back online, cpufreq_set_policy() will fail for it due to a failing limits check. To prevent that from happening, initialize the min and max fields of the new_policy object to the ones stored in user_policy that were previously set via sysfs. Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tejun Heo authored
commit f1834646 upstream. From 0aa2e9b921d6db71150633ff290199554f0842a8 Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Wed, 23 May 2018 10:29:00 -0700 cgwb_release() punts the actual release to cgwb_release_workfn() on system_wq. Depending on the number of cgroups or block devices, there can be a lot of cgwb_release_workfn() in flight at the same time. We're periodically seeing close to 256 kworkers getting stuck with the following stack trace and overtime the entire system gets stuck. [<ffffffff810ee40c>] _synchronize_rcu_expedited.constprop.72+0x2fc/0x330 [<ffffffff810ee634>] synchronize_rcu_expedited+0x24/0x30 [<ffffffff811ccf23>] bdi_unregister+0x53/0x290 [<ffffffff811cd1e9>] release_bdi+0x89/0xc0 [<ffffffff811cd645>] wb_exit+0x85/0xa0 [<ffffffff811cdc84>] cgwb_release_workfn+0x54/0xb0 [<ffffffff810a68d0>] process_one_work+0x150/0x410 [<ffffffff810a71fd>] worker_thread+0x6d/0x520 [<ffffffff810ad3dc>] kthread+0x12c/0x160 [<ffffffff81969019>] ret_from_fork+0x29/0x40 [<ffffffffffffffff>] 0xffffffffffffffff The events leading to the lockup are... 1. A lot of cgwb_release_workfn() is queued at the same time and all system_wq kworkers are assigned to execute them. 2. They all end up calling synchronize_rcu_expedited(). One of them wins and tries to perform the expedited synchronization. 3. However, that invovles queueing rcu_exp_work to system_wq and waiting for it. Because #1 is holding all available kworkers on system_wq, rcu_exp_work can't be executed. cgwb_release_workfn() is waiting for synchronize_rcu_expedited() which in turn is waiting for cgwb_release_workfn() to free up some of the kworkers. We shouldn't be scheduling hundreds of cgwb_release_workfn() at the same time. There's nothing to be gained from that. This patch updates cgwb release path to use a dedicated percpu workqueue with @max_active of 1. While this resolves the problem at hand, it might be a good idea to isolate rcu_exp_work to its own workqueue too as it can be used from various paths and is prone to this sort of indirect A-A deadlocks. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roman Pen authored
commit a347c7ad upstream. It is not allowed to reinit q->tag_set_list list entry while RCU grace period has not completed yet, otherwise the following soft lockup in blk_mq_sched_restart() happens: [ 1064.252652] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [fio:9270] [ 1064.254445] task: ffff99b912e8b900 task.stack: ffffa6d54c758000 [ 1064.254613] RIP: 0010:blk_mq_sched_restart+0x96/0x150 [ 1064.256510] Call Trace: [ 1064.256664] <IRQ> [ 1064.256824] blk_mq_free_request+0xea/0x100 [ 1064.256987] msg_io_conf+0x59/0xd0 [ibnbd_client] [ 1064.257175] complete_rdma_req+0xf2/0x230 [ibtrs_client] [ 1064.257340] ? ibtrs_post_recv_empty+0x4d/0x70 [ibtrs_core] [ 1064.257502] ibtrs_clt_rdma_done+0xd1/0x1e0 [ibtrs_client] [ 1064.257669] ib_create_qp+0x321/0x380 [ib_core] [ 1064.257841] ib_process_cq_direct+0xbd/0x120 [ib_core] [ 1064.258007] irq_poll_softirq+0xb7/0xe0 [ 1064.258165] __do_softirq+0x106/0x2a2 [ 1064.258328] irq_exit+0x92/0xa0 [ 1064.258509] do_IRQ+0x4a/0xd0 [ 1064.258660] common_interrupt+0x7a/0x7a [ 1064.258818] </IRQ> Meanwhile another context frees other queue but with the same set of shared tags: [ 1288.201183] INFO: task bash:5910 blocked for more than 180 seconds. [ 1288.201833] bash D 0 5910 5820 0x00000000 [ 1288.202016] Call Trace: [ 1288.202315] schedule+0x32/0x80 [ 1288.202462] schedule_timeout+0x1e5/0x380 [ 1288.203838] wait_for_completion+0xb0/0x120 [ 1288.204137] __wait_rcu_gp+0x125/0x160 [ 1288.204287] synchronize_sched+0x6e/0x80 [ 1288.204770] blk_mq_free_queue+0x74/0xe0 [ 1288.204922] blk_cleanup_queue+0xc7/0x110 [ 1288.205073] ibnbd_clt_unmap_device+0x1bc/0x280 [ibnbd_client] [ 1288.205389] ibnbd_clt_unmap_dev_store+0x169/0x1f0 [ibnbd_client] [ 1288.205548] kernfs_fop_write+0x109/0x180 [ 1288.206328] vfs_write+0xb3/0x1a0 [ 1288.206476] SyS_write+0x52/0xc0 [ 1288.206624] do_syscall_64+0x68/0x1d0 [ 1288.206774] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 What happened is the following: 1. There are several MQ queues with shared tags. 2. One queue is about to be freed and now task is in blk_mq_del_queue_tag_set(). 3. Other CPU is in blk_mq_sched_restart() and loops over all queues in tag list in order to find hctx to restart. Because linked list entry was modified in blk_mq_del_queue_tag_set() without proper waiting for a grace period, blk_mq_sched_restart() never ends, spining in list_for_each_entry_rcu_rr(), thus soft lockup. Fix is simple: reinit list entry after an RCU grace period elapsed. Fixes: Fixes: 705cda97 ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list") Cc: stable@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-block@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josef Bacik authored
commit 9e2b1967 upstream. When we stopped relying on the bdev everywhere I broke updating the block device size on the fly, which ceph relies on. We can't just do set_capacity, we also have to do bd_set_size so things like parted will notice the device size change. Fixes: 29eaadc0 ("nbd: stop using the bdev everywhere") cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josef Bacik authored
commit c3f7c939 upstream. I messed up changing the size of an NBD device while it was connected by not actually updating the device or doing the uevent. Fix this by updating everything if we're connected and we change the size. cc: stable@vger.kernel.org Fixes: 639812a1 ("nbd: don't set the device size until we're connected") Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josef Bacik authored
commit 8364da47 upstream. This fixes a use after free bug, we shouldn't be doing disk->queue right after we do del_gendisk(disk). Save the queue and do the cleanup after the del_gendisk. Fixes: c6a4759e ("nbd: add device refcounting") cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shirish Pargaonkar authored
cifs: For SMB2 security informaion query, check for minimum sized security descriptor instead of sizeof FileAllInformation class commit ee25c6dd upstream. Validate_buf () function checks for an expected minimum sized response passed to query_info() function. For security information, the size of a security descriptor can be smaller (one subauthority, no ACEs) than the size of the structure that defines FileInfoClass of FileAllInformation. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199725 Cc: <stable@vger.kernel.org> Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Noah Morrison <noah.morrison@rubrik.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Syms authored
commit d81243c6 upstream. Handle this additional status in the same way as SESSION_EXPIRED. Signed-off-by: Mark Syms <mark.syms@citrix.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve French authored
commit b2adf22f upstream. The server detects reconnect by the (non-zero) value in PreviousSessionId of SMB2/SMB3 SessionSetup request, but this behavior regressed due to commit 166cea4d ("SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup") CC: Stable <stable@vger.kernel.org> CC: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve French authored
commit cfe89091 upstream. Fix a few cases where we were not freeing the xid which led to active requests being non-zero at unmount time. Signed-off-by: Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Luck authored
commit 985c78d3 upstream. Each of the strings that we want to put into the buf[MAX_FLAG_OPT_SIZE] in flags_read() is two characters long. But the sprintf() adds a trailing newline and will add a terminating NUL byte. So MAX_FLAG_OPT_SIZE needs to be 4. sprintf() calls vsnprintf() and *that* does return: " * The return value is the number of characters which would * be generated for the given input, excluding the trailing * '\0', as per ISO C99." Note the "excluding". Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180427163707.ktaiysvbk3yhk4wm@agluck-deskSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dennis Wassenberg authored
commit 7eef32c1 upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP ProBook 640 G4 Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dennis Wassenberg authored
commit 2861751f upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP EliteBook 830 G5 Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bo Chen authored
commit a3aa60d5 upstream. When 'kzalloc()' fails in 'snd_hda_attach_pcm_stream()', a new pcm instance is created without setting its operators via 'snd_pcm_set_ops()'. Following operations on the new pcm instance can trigger kernel null pointer dereferences and cause kernel oops. This bug was found with my work on building a gray-box fault-injection tool for linux-kernel-module binaries. A kernel null pointer dereference was confirmed from line 'substream->ops->open()' in function 'snd_pcm_open_substream()' in file 'sound/core/pcm_native.c'. This patch fixes the bug by calling 'snd_device_free()' in the error handling path of 'kzalloc()', which removes the new pcm instance from the snd card before returns with an error code. Signed-off-by: Bo Chen <chenbo@pdx.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit f16041df upstream. HP Z2 G4 requires the same workaround as other HP machines that have no mic-pin detection. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-